Revision 0:e8934310aa9d, committed 2011-09-14

Comitter:

emmanuelchio

Date:

Wed Sep 14 05:30:31 2011 +0000

Commit message:

Rev 1.0

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SMARTGPU.lib	Wed Sep 14 05:30:31 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/emmanuelchio/code/SMARTGPU/#8da93960a86b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Sep 14 05:30:31 2011 +0000
@@ -0,0 +1,125 @@
+/**************************************************************************************/
+/*SMARTGPU intelligent embedded graphics processor unit
+ those examples are for use the SMARTGPU with the mbed microcontoller, just connect tx,rx,and reset
+ Board:
+ http://www.vizictechnologies.com/#/desarrollo/4554296549
+ 
+ www.vizictechnologies.com 
+ Vizic Technologies copyright 2011 */
+/**************************************************************************************/
+/**************************************************************************************/
+ 
+#include "mbed.h"
+#include "SMARTGPU.h"
+
+SMARTGPU lcd(p13,p14,p15);          //(TX,RX,Reset);
+
+// defines for balls
+#define radiusBall1 15     //ball1 size
+#define colourBall1 GREEN  //ball1 colour
+#define radiusBall2 8      //ball2 size
+#define colourBall2 YELLOW //ball2 colour
+#define radiusBall3 11     //ball3 size
+#define colourBall3 RED    //ball3 colour
+#define radiusBall4 18     //ball4 size
+#define colourBall4 BLUE   //ball4 colour
+
+//variables used by move ball methods
+int speedBall1=3; //ball1 moving speed - amount of pixels that ball move each time
+int speedBall2=4; //ball2 moving speed - amount of pixels that ball move each time 
+int speedBall3=8; //ball3 moving speed - amount of pixels that ball move each time 
+int speedBall4=6; //ball4 moving speed - amount of pixels that ball move each time 
+int dirx1=1;      //xball1 initial positive direction
+int diry1=1;      //yball1 initial positive direction
+int xBall1=300;   //x initial position of ball1
+int yBall1=100;   //y initial position of ball1
+int dirx2=-1;     //xball2 initial negative direction
+int diry2=-1;     //yball2 initial negative direction
+int xBall2=30;    //x initial position of ball2
+int yBall2=80;    //y initial position of ball2
+int dirx3=-1;     //xball3 initial negative direction
+int diry3=1;      //yball3 initial negative direction
+int xBall3=60;    //x initial position of ball3
+int yBall3=15;    //y initial position of ball3
+int dirx4=1;      //xball4 initial negative direction
+int diry4=-1;     //yball4 initial negative direction
+int xBall4=150;   //x initial position of ball4
+int yBall4=80;    //y initial position of ball4
+
+/***************************************************/
+//Function that updates the current position of the ball1
+void moveBall1(){
+   lcd.drawCircle(xBall1,yBall1,radiusBall1,BLACK,UNFILL);       // Erase previous ball position
+   xBall1+=(dirx1*speedBall1);                                   // Calculate new x coordinate for ball1 
+   yBall1+=(diry1*speedBall1);                                   // Calculate new y coordinate for ball1  
+   lcd.drawCircle(xBall1,yBall1,radiusBall1,colourBall1,UNFILL); // Draw new ball position
+   if((xBall1+speedBall1+radiusBall1)>318 | (xBall1-speedBall1-radiusBall1)<=1){           // if ball reaches the left or right corner, we invert moving direction 
+    dirx1= dirx1*(-1);                                         // Invert the moving direction by multiplying by -1
+   }
+   if((yBall1+speedBall1+radiusBall1)>238 | (yBall1-speedBall1-radiusBall1)<=1){           // if ball reaches the top or bottom corner, we invert moving direction 
+    diry1= diry1*(-1);                                         // Invert the moving direction by multiplying by -1
+   }                       
+}
+
+/***************************************************/
+//Function that updates the current position of the ball2
+void moveBall2(){                    
+   lcd.drawCircle(xBall2,yBall2,radiusBall2,BLACK,FILL);       // Erase previous ball position
+   xBall2+=(dirx2*speedBall2);                                 // Calculate new x coordinate for ball2
+   yBall2+=(diry2*speedBall2);                                 // Calculate new y coordinate for ball2  
+   lcd.drawCircle(xBall2,yBall2,radiusBall2,colourBall2,FILL); // Draw new ball position
+   if((xBall2+speedBall2+radiusBall2)>318 | (xBall2-speedBall2-radiusBall2)<=1){  // if ball reaches the left or right corner, we invert moving direction
+    dirx2= dirx2*(-1);                                         // Invert the moving direction by multiplying by -1
+   }
+   if((yBall2+speedBall2+radiusBall2)>238 | (yBall2-speedBall2-radiusBall2)<=1){  // if ball reaches the top or bottom corner, we invert moving direction 
+     diry2= diry2*(-1);                                        // Invert the moving direction by multiplying by -1
+   }                        
+}
+
+/***************************************************/
+//Function that updates the current position of the ball3
+void moveBall3(){                    
+   lcd.drawCircle(xBall3,yBall3,radiusBall3,BLACK,FILL);       // Erase previous ball position
+   xBall3+=(dirx3*speedBall3);                                 // Calculate new x coordinate for ball3
+   yBall3+=(diry3*speedBall3);                                 // Calculate new y coordinate for ball3  
+   lcd.drawCircle(xBall3,yBall3,radiusBall3,colourBall3,FILL); // Draw new ball position
+   if((xBall3+speedBall3+radiusBall3)>318 | (xBall3-speedBall3-radiusBall3)<=1){  // if ball reaches the left or right corner, we invert moving direction
+    dirx3= dirx3*(-1);                                         // Invert the moving direction by multiplying by -1
+   }
+   if((yBall3+speedBall3+radiusBall3)>238 | (yBall3-speedBall3-radiusBall3)<=1){  // if ball reaches the top or bottom corner, we invert moving direction 
+     diry3= diry3*(-1);                                        // Invert the moving direction by multiplying by -1
+   }                        
+}
+
+/***************************************************/
+//Function that updates the current position of the ball4
+void moveBall4(){
+   lcd.drawCircle(xBall4,yBall4,radiusBall4,BLACK,UNFILL);       // Erase previous ball position
+   xBall4+=(dirx4*speedBall4);                                   // Calculate new x coordinate for ball4 
+   yBall4+=(diry4*speedBall4);                                   // Calculate new y coordinate for ball4  
+   lcd.drawCircle(xBall4,yBall4,radiusBall4,colourBall4,UNFILL); // Draw new ball position
+   if((xBall4+speedBall4+radiusBall4)>318 | (xBall4-speedBall4-radiusBall4)<=1){           // if ball reaches the left or right corner, we invert moving direction 
+    dirx4= dirx4*(-1);                                         // Invert the moving direction by multiplying by -1
+   }
+   if((yBall4+speedBall4+radiusBall4)>238 | (yBall4-speedBall4-radiusBall4)<=1){           // if ball reaches the top or bottom corner, we invert moving direction 
+    diry4= diry4*(-1);                                         // Invert the moving direction by multiplying by -1
+   }                       
+}
+
+/***************************************************/
+/***************************************************/
+int main() { 
+  lcd.reset();                       //physically reset SMARTGPU
+  lcd.start();                       //initialize the SMARTGPU processor
+  
+  lcd.baudChange(1000000); //set a fast baud! for fast drawing
+  lcd.drawRectangle(0,0,319,239,MAGENTA,UNFILL); //draw corners
+  
+  while(1){             // Loop forever
+    moveBall1();        // move ball1
+    moveBall2();        // move ball2
+    moveBall3();        // move ball3
+    moveBall4();        // move ball4
+    wait_ms(15);        // wait a little
+  }
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Wed Sep 14 05:30:31 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912