Rioux Chem Control Box

/media/uploads/emh203/ccb.jpg

This is the example project for the Rioux Chem Control Box. I have posted some youtube videos to guide you through the hardware and software:

Rioux Chem Control Box - Hardware

Revision	Date	Who	Commit message
9:c830667212f4	2021-11-01	wavenumber	Fixed Thermocouple sign extend error default tip
8:0cf1573051e8	2021-10-06	wavenumber	Added the ability to change baud rate on the ports. Port 1 sends both a carraige return and line feed for the valve
7:de452fceafc1	2021-09-20	wavenumber	Returning data back from the Pump. Reverting to 82 ohm resistor for 4-20
6:6a870e1e52c1	2021-09-12	wavenumber	Added a simple P0 and P1 command for the pumps
5:b56a4592aac0	2021-09-12	wavenumber	Updated the Temperature terminal common w/ Chris's status
4:e3eda81c97ae	2021-08-05	wavenumber	Change the 4 to 20mA computation to use 240 resistor that is on Rev B. We may need to investigated if this still needs to be the old value of 82
3:cb48919cd5e8	2021-08-05	wavenumber	Added BPIN and BPOUT commands to support the new back pressure regulator. Added red & green LED control objects. Removed all of the graphics functions for use on rev A
2:73a028278c5c	2020-08-31	wavenumber	Fixed issue with Thermocouple bit masking. Added Echo off command
1:d64ac853223c	2015-08-06	emh203	Updated the 4 to 20mA to use a sense resistor of 82 ohms
0:7798270c1f52	2014-01-25	emh203	1st version to Demo! All interfaces tested and working