Revision 8:89039f83e9fc, committed 2018-01-22

Comitter:

emerette

Date:

Mon Jan 22 15:55:52 2018 +0000

Parent:

7:c63508d8ff9c

Commit message:

1-22-2018

Changed in this revision

--- a/app/Comissioning.h	Thu Nov 16 18:30:00 2017 +0000
+++ b/app/Comissioning.h	Mon Jan 22 15:55:52 2018 +0000
@@ -40,12 +40,12 @@
  * \remark In this application, if the last 4 bytes are all 0, then the 32 bit address is automatically generated using a pseudo random generator seeded with a value derived from BoardUniqueId value
  * If provided by user, e.g. { IEEE_OUI, 0x00, 0x00, 0x00, 0xFF, 0x01 }, then this value is used by the application
  */
-#define LORAWAN_DEVICE_EUI                          { IEEE_OUI, 0x01, 0x00, 0x00, 0x00, 0x01 }
+#define LORAWAN_DEVICE_EUI                          { IEEE_OUI, 0x01, 0x02, 0x03, 0x04, 0x05 }
 
 /*!
  * Application IEEE EUI (big endian)
  */
-#define LORAWAN_APPLICATION_EUI                     { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }
+#define LORAWAN_APPLICATION_EUI                     { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
 
 /*!
  * AES encryption/decryption cipher application key
@@ -60,7 +60,7 @@
  * \remark In this application, if the value is 0, then the address is automatically generated using a pseudo random generator seeded with a value derived from BoardUniqueId value
  * If provided by user, e.g. 0x78563412, then this value is used by the application
  */
-#define LORAWAN_DEVICE_ADDRESS                      ( uint32_t )0x00000001
+#define LORAWAN_DEVICE_ADDRESS                      ( uint32_t )0xffaa1234
 
 /*!
  * AES encryption/decryption cipher network session key

--- a/app/Config.h	Thu Nov 16 18:30:00 2017 +0000
+++ b/app/Config.h	Mon Jan 22 15:55:52 2018 +0000
@@ -31,7 +31,7 @@
 #else
 
 // define channel block: e.g. USE_BAND_915_HYBRID_BLOCK_A, USE_BAND_915_HYBRID_BLOCK_B ... USE_BAND_915_HYBRID_BLOCK_H etc.
-#define USE_BAND_915_HYBRID_BLOCK_D
+#define USE_BAND_915_HYBRID_BLOCK_A
 
 #endif
 
@@ -48,7 +48,7 @@
 /*!
  * Defines the randomness in the dutycycle. 
  */
-#define APP_TX_DUTYCYCLE_RND                        3000000
+#define APP_TX_DUTYCYCLE_RND                        1000000
 
 /*!
  * LoRaWAN confirmed messages
@@ -62,7 +62,7 @@
  *
  * \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0
  */
-#define LORAWAN_ADR_ON                              1
+#define LORAWAN_ADR_ON                              0
 
 /*!
  * Default mote datarate
@@ -80,7 +80,7 @@
  *
  * \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 }
  */
-#define LORAWAN_TX_POWER                            TX_POWER_10_DBM
+#define LORAWAN_TX_POWER                            TX_POWER_20_DBM
 
 #if ( LORAWAN_APP_PORT == 5 )
 /*====================================================