Revision 1:f3da8a85e312, committed 2015-03-22

Comitter:

emcu

Date:

Sun Mar 22 00:46:34 2015 +0000

Parent:

0:c9d8fcdda4d0

Commit message:

Test program for:; Nucleo_F334R8 that drive the 4relay Shield from Seeed Studio

Changed in this revision

diff -r c9d8fcdda4d0 -r f3da8a85e312 main.cpp
--- a/main.cpp	Fri Feb 21 12:57:03 2014 +0000
+++ b/main.cpp	Sun Mar 22 00:46:34 2015 +0000
@@ -1,14 +1,101 @@
 #include "mbed.h"
+
+/*
+ By www.emcu.it
+
+  Test the: 4 relay shield from seeed studio
+  http://www.seeedstudio.com/wiki/Relay_Shield_V2.0 
+
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+*/
+
+
+// NOTE: The Serial pc & Serial device are not used in this example
+Serial pc(SERIAL_TX, SERIAL_RX);    // This is USART2 tx, rx - It is used for debug (Usb Virtual Com)
+Serial device(PB_6, PA_10);         // This is USART1 tx, rx
+//------------------------------------
+// UART configuration:
+// 9600 bauds, 8-bit data, no parity
+//------------------------------------
+
  
 DigitalIn mybutton(USER_BUTTON);
-DigitalOut myled(LED1);
+DigitalOut LED(PA_5);      
+DigitalOut RL1(PA_8);       // Relè n.1
+DigitalOut RL2(PB_10);      // Relè n.2
+DigitalOut RL3(PB_4);       // Relè n.3
+DigitalOut RL4(PB_5);       // Relè n.4
+
+#define NonPremuto 1
+#define Premuto    0
+
+int Tasto = NonPremuto;
+
+void OnRELE_forTime(int Rele, float Tempo);
+
  
-int main() {
-  while(1) {
-    if (mybutton == 0) { // Button is pressed
-      myled = !myled; // Toggle the LED state
-      wait(0.2); // 200 ms
+int main() 
+{
+  while(1) 
+  {
+    // Tasto = mybutton;
+    if (mybutton == Premuto) 
+    {   // Button is pressed
+        LED = !LED;             // Toggle the LED state
+        OnRELE_forTime(1, 2);   // ON RL1 for 2sec
+        OnRELE_forTime(2, 2);   // ON RL2 for 2sec
+        OnRELE_forTime(3, 2);   // ON RL3 for 2sec
+        OnRELE_forTime(4, 2);   // ON RL4 for 2sec
     }
   }
 }
- 
\ No newline at end of file
+ 
+
+void OnRELE_forTime(int Rele, float Tempo)
+{
+    if (Rele == 1)
+    {
+        RL1 = 1;
+        wait(Tempo);
+        RL1 = 0;
+    }
+    
+    if (Rele == 2)
+    {
+        RL2 = 1;
+        wait(Tempo);
+        RL2 = 0;
+    }    
+    
+    if (Rele == 3)
+    {
+        RL3 = 1;
+        wait(Tempo);
+        RL3 = 0;
+    }    
+    
+    if (Rele == 4)
+    {
+        RL4 = 1;
+        wait(Tempo);
+        RL4 = 0;
+    }    
+}    

diff -r c9d8fcdda4d0 -r f3da8a85e312 mbed.bld
--- a/mbed.bld	Fri Feb 21 12:57:03 2014 +0000
+++ b/mbed.bld	Sun Mar 22 00:46:34 2015 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/ed8466a608b4
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/487b796308b0
\ No newline at end of file