Revision 0:39600c1c28c1, committed 2018-04-01

Comitter:

emcu

Date:

Sun Apr 01 22:11:36 2018 +0000

Commit message:

PIR sensor based on: NUCLEO-L011K4 + PANASONIC PIR EKMC1603111

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Apr 01 22:11:36 2018 +0000
@@ -0,0 +1,83 @@
+#include "mbed.h"
+
+/*
+
+By:         www.emcu.eu
+Date:       April 2018
+Components: NUCLEO-L011K4 + PANASONIC PIR EKMC1603111
+Connections:
+
+PIR VCC     ->  PB_4
+PIR Signal  ->  PB_5
+PIR GND     ->  PA_11
+
+Buzzer Vcc  ->  PA_9
+Buzzer GND  ->  GND of NUCLEO-L011K4
+
+ATTENTION:
+For use the NUCLEO-L011K4 with an external power supply, you must do a tin soldering on JP1.
+See the NUCLEO-L011K4 datasheet at pg.11
+http://www.st.com/content/ccc/resource/technical/document/user_manual/e3/0e/88/05/e8/74/43/a0/DM00231744.pdf/files/DM00231744.pdf/jcr:content/translations/en.DM00231744.pdf
+
+NUCLEO-L011K4 is available from here:
+*** http://www.newark.com/stmicroelectronics/nucleo-l011k4/dev-board-nucleo-32-mcu/dp/81Y3973?ost=NUCLEO-L011K4&ddkey=http%3Aen-US%2FElement14_US%2Fsearch
+*** https://www.mouser.it/ProductDetail/STMicroelectronics/NUCLEO-L011K4?qs=%2fha2pyFaduhQJSbhHAGqiYkL%252bo2vgvfhlGVOMPt1G42J4HVOM%2fj23Q%3d%3d
+
+PANASONIC PIR EKMC1603111 is available from here:
+*** http://www.newark.com/panasonic-electric-works/ekmc1603111/pir-motion-sensor-digital-3vdc/dp/26T3945
+*** https://www.mouser.it/ProductDetail/Panasonic/EKMC1603111/?qs=sGAEpiMZZMvhQj7WZhFIAJaM7IUEh%252bHgM6uLDBL6vt0=&gclid=Cj0KCQjwhoLWBRD9ARIsADIRaxR7KH6LCSsPG5aDS1dEvlALL-ijmg-nd1XuzC_C1-15QGecG8rKbckaAn7AEALw_wcB
+
+
+*/
+
+DigitalOut myled(LED1);
+DigitalOut Buzzer(PA_9);   // Drive Buzzer
+
+// Drive PIR
+DigitalOut PIU(PB_4);
+DigitalOut GND(PA_11);
+DigitalIn  ReadPIR(PB_5);   // READ PIR status
+
+
+
+uint8_t n=0;
+
+int main() 
+{
+    Buzzer = 0;
+    myled = 0;
+                
+    // Configure PIR SIGNAL, GND and VCC
+    ReadPIR.mode(PullDown);    
+    GND=0;
+    wait(0.5);
+    PIU=1;
+    wait(0.5);
+    
+    // Waiting PIR stabilization
+    for (n=0; n<15; n++)
+    {
+        myled = !myled;
+        wait(1);
+    }
+    myled = 0;
+    
+    while(1) 
+    {
+        // Check PIR status
+        if (ReadPIR == 1) // PIR out at 1 == was detect a movement
+        {
+            for (n=0; n<20; n++)
+            {
+                Buzzer = !Buzzer;
+                myled = !myled;
+                wait(0.1); // 100 ms
+            }
+        }
+        else // No movement
+        {
+            Buzzer = 0;
+            myled = 0;
+        }
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Apr 01 22:11:36 2018 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/994bdf8177cb
\ No newline at end of file