Diff: main.cpp

Revision:

0:e11079722007

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Oct 01 11:18:36 2014 +0000
@@ -0,0 +1,62 @@
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+#include "mbed.h"
+#include "TextLCD.h"
+
+/******************************************************************************
+ * Typedefs and defines
+ *****************************************************************************/
+
+/******************************************************************************
+ * Local variables
+ *****************************************************************************/
+
+DigitalOut myled(LED1);
+
+SPI spi_lcd(p5, p6, p7); // MOSI, MISO, SCLK
+
+/******************************************************************************
+ * Local functions
+ *****************************************************************************/
+
+/*
+ Hardware Setup:
+ 
+ - Jumpers JP1..JP6 should be in position 1-2
+ - Jumpers in J14 should NOT be inserted
+ - Jumper J7 should be inserted
+ - Display in connector J10. Display should be over the base board - not outside
+*/
+
+int main() {
+    TextLCD_SPI lcd(&spi_lcd, p30, TextLCD::LCD16x2); // SPI bus, CS pin, LCD Type ok
+    
+    lcd.cls();
+    lcd.locate(0, 0);
+    lcd.putc('E');
+    lcd.putc('m');
+    lcd.putc('b');
+    lcd.putc('e');
+    lcd.putc('d');
+    lcd.putc('d');
+    lcd.putc('e');
+    lcd.putc('d');
+    lcd.putc(' ');
+    lcd.putc('A');
+    lcd.putc('r');
+    lcd.putc('t');
+    lcd.putc('i');
+    lcd.putc('s');
+    lcd.putc('t');
+    lcd.putc('s');
+    lcd.putc('!');
+    lcd.setCursor(TextLCD::CurOff_BlkOn);
+    
+    while(1) {
+        myled = 1;
+        wait(0.2);
+        myled = 0;
+        wait(0.2);
+    }
+}