Elijah Orr
/
mbed-renbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda.h
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda.h Wed Sep 16 15:32:31 2015 +0100
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda.h Fri Oct 02 07:35:07 2015 +0200
@@ -2,14 +2,14 @@
******************************************************************************
* @file stm32f0xx_hal_irda.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
+ * @version V1.3.0
+ * @date 26-June-2015
* @brief This file contains all the functions prototypes for the IRDA
* firmware library.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -33,7 +33,7 @@
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- ******************************************************************************
+ ******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
@@ -55,16 +55,16 @@
/** @addtogroup IRDA
* @{
- */
+ */
/* Exported types ------------------------------------------------------------*/
/** @defgroup IRDA_Exported_Types IRDA Exported Types
* @{
- */
+ */
-/**
- * @brief IRDA Init Structure definition
- */
+/**
+ * @brief IRDA Init Structure definition
+ */
typedef struct
{
uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
@@ -74,32 +74,32 @@
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref IRDAEx_Word_Length */
- uint16_t Parity; /*!< Specifies the parity mode.
+ uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref IRDA_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
-
- uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref IRDA_Mode */
-
+
uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
to achieve low-power frequency.
@note Prescaler value 0 is forbidden */
-
+
uint16_t PowerMode; /*!< Specifies the IRDA power mode.
This parameter can be a value of @ref IRDA_Low_Power */
}IRDA_InitTypeDef;
-/**
- * @brief HAL IRDA State structures definition
- */
+/**
+ * @brief HAL IRDA State structures definition
+ */
typedef enum
{
- HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
- HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
@@ -116,56 +116,56 @@
IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
IRDA_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
- IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+ IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
}IRDA_ClockSourceTypeDef;
-/**
- * @brief IRDA handle Structure definition
- */
+/**
+ * @brief IRDA handle Structure definition
+ */
typedef struct
{
USART_TypeDef *Instance; /*!< USART registers base address */
-
+
IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
-
+
uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
-
+
uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
-
+
uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
-
+
uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
-
+
uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
-
+
uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
-
- uint16_t Mask; /*!< USART RX RDR register mask */
-
+
+ uint16_t Mask; /*!< USART RX RDR register mask */
+
DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
-
+
DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
-
+
HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
-
+ __IO HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
+
__IO uint32_t ErrorCode; /*!< IRDA Error code
This parameter can be a value of @ref IRDA_Error */
}IRDA_HandleTypeDef;
-/**
- * @brief IRDA Configuration enumeration values definition
+/**
+ * @brief IRDA Configuration enumeration values definition
*/
-typedef enum
+typedef enum
{
- IRDA_BAUDRATE = 0x00,
- IRDA_PARITY = 0x01,
- IRDA_WORDLENGTH = 0x02,
- IRDA_MODE = 0x03,
- IRDA_PRESCALER = 0x04,
- IRDA_POWERMODE = 0x05
+ IRDA_BAUDRATE = 0x00, /*!< IRDA Baud rate */
+ IRDA_PARITY = 0x01, /*!< IRDA frame parity */
+ IRDA_WORDLENGTH = 0x02, /*!< IRDA frame length */
+ IRDA_MODE = 0x03, /*!< IRDA communication mode */
+ IRDA_PRESCALER = 0x04, /*!< IRDA prescaling */
+ IRDA_POWERMODE = 0x05 /*!< IRDA power mode */
}IRDA_ControlTypeDef;
/**
@@ -173,13 +173,13 @@
*/
/* Exported constants --------------------------------------------------------*/
-/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
* @{
*/
/** @defgroup IRDA_Error IRDA Error
* @{
- */
+ */
#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
@@ -188,62 +188,51 @@
#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
/**
* @}
- */
+ */
-/** @defgroup IRDA_Parity IRDA Parity
+/** @defgroup IRDA_Parity IRDA Parity
* @{
- */
-#define IRDA_PARITY_NONE ((uint16_t)0x0000)
-#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
-#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
-#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
- ((PARITY) == IRDA_PARITY_EVEN) || \
- ((PARITY) == IRDA_PARITY_ODD))
-/**
- * @}
- */
-
-
-/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
- * @{
- */
-#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
-#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
-#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
-#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & ((uint16_t)(~((uint16_t)(IRDA_MODE_TX_RX))))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
+ */
+#define IRDA_PARITY_NONE ((uint32_t)0x00000000) /*!< No parity */
+#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< Even parity */
+#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< Odd parity */
/**
* @}
*/
-/** @defgroup IRDA_Low_Power IRDA Low Power
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
* @{
*/
-#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
-#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
-#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
- ((MODE) == IRDA_POWERMODE_NORMAL))
+#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) /*!< RX mode */
+#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) /*!< TX mode */
+#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< RX and TX mode */
/**
* @}
*/
-
- /** @defgroup IRDA_State IRDA State
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
* @{
- */
-#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
-#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
-#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
- ((STATE) == IRDA_STATE_ENABLE))
+ */
+#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000) /*!< IRDA normal power mode */
+#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) /*!< IRDA low power mode */
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE ((uint32_t)0x00000000) /*!< IRDA disabled */
+#define IRDA_STATE_ENABLE ((uint32_t)USART_CR1_UE) /*!< IRDA enabled */
/**
* @}
*/
/** @defgroup IRDA_Mode IRDA Mode
* @{
- */
-#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
-#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
-#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
- ((STATE) == IRDA_MODE_ENABLE))
+ */
+#define IRDA_MODE_DISABLE ((uint32_t)0x00000000) /*!< Associated UART disabled in IRDA mode */
+#define IRDA_MODE_ENABLE ((uint32_t)USART_CR3_IREN) /*!< Associated UART enabled in IRDA mode */
/**
* @}
*/
@@ -251,58 +240,62 @@
/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
* @{
*/
-#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
-#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
-#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
- ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
+#define IRDA_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) /*!< One-bit sampling disabled */
+#define IRDA_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< One-bit sampling enabled */
/**
* @}
- */
-
+ */
+
/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
* @{
*/
-#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
-#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
-#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
- ((DMATX) == IRDA_DMA_TX_ENABLE))
+#define IRDA_DMA_TX_DISABLE ((uint32_t)0x00000000) /*!< IRDA DMA TX disabled */
+#define IRDA_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) /*!< IRDA DMA TX enabled */
/**
* @}
- */
-
+ */
+
/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
* @{
*/
-#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
-#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
-#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
- ((DMARX) == IRDA_DMA_RX_ENABLE))
+#define IRDA_DMA_RX_DISABLE ((uint32_t)0x00000000) /*!< IRDA DMA RX disabled */
+#define IRDA_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) /*!< IRDA DMA RX enabled */
/**
* @}
*/
-
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+/**
+ * @}
+ */
+
/** @defgroup IRDA_Flags IRDA Flags
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the ISR register
* @{
*/
-#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
-#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
-#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
-#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
-#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
-#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
-#define IRDA_FLAG_TC ((uint32_t)0x00000040)
-#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
-#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
-#define IRDA_FLAG_NE ((uint32_t)0x00000004)
-#define IRDA_FLAG_FE ((uint32_t)0x00000002)
-#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+#define IRDA_FLAG_REACK ((uint32_t)0x00400000) /*!< IRDA Receive enable acknowledge flag */
+#define IRDA_FLAG_TEACK ((uint32_t)0x00200000) /*!< IRDA Transmit enable acknowledge flag */
+#define IRDA_FLAG_BUSY ((uint32_t)0x00010000) /*!< IRDA Busy flag */
+#define IRDA_FLAG_ABRF ((uint32_t)0x00008000) /*!< IRDA Auto baud rate flag */
+#define IRDA_FLAG_ABRE ((uint32_t)0x00004000) /*!< IRDA Auto baud rate error */
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080) /*!< IRDA Transmit data register empty */
+#define IRDA_FLAG_TC ((uint32_t)0x00000040) /*!< IRDA Transmission complete */
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020) /*!< IRDA Read data register not empty */
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008) /*!< IRDA Overrun error */
+#define IRDA_FLAG_NE ((uint32_t)0x00000004) /*!< IRDA Noise error */
+#define IRDA_FLAG_FE ((uint32_t)0x00000002) /*!< IRDA Noise error */
+#define IRDA_FLAG_PE ((uint32_t)0x00000001) /*!< IRDA Parity error */
/**
* @}
- */
+ */
-/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definition
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
* Elements values convention: 0000ZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
@@ -310,16 +303,14 @@
* - 10: CR2 register
* - 11: CR3 register
* - ZZZZ : Flag position in the ISR register(4bits)
- * @{
- */
-#define IRDA_IT_PE ((uint16_t)0x0028)
-#define IRDA_IT_TXE ((uint16_t)0x0727)
-#define IRDA_IT_TC ((uint16_t)0x0626)
-#define IRDA_IT_RXNE ((uint16_t)0x0525)
-#define IRDA_IT_IDLE ((uint16_t)0x0424)
+ * @{
+ */
+#define IRDA_IT_PE ((uint16_t)0x0028) /*!< IRDA Parity error interruption */
+#define IRDA_IT_TXE ((uint16_t)0x0727) /*!< IRDA Transmit data register empty interruption */
+#define IRDA_IT_TC ((uint16_t)0x0626) /*!< IRDA Transmission complete interruption */
+#define IRDA_IT_RXNE ((uint16_t)0x0525) /*!< IRDA Read data register not empty interruption */
+#define IRDA_IT_IDLE ((uint16_t)0x0424) /*!< IRDA Idle interruption */
-
-
/** Elements values convention: 000000000XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
@@ -327,18 +318,18 @@
* - 10: CR2 register
* - 11: CR3 register
*/
-#define IRDA_IT_ERR ((uint16_t)0x0060)
+#define IRDA_IT_ERR ((uint16_t)0x0060) /*!< IRDA Error interruption */
/** Elements values convention: 0000ZZZZ00000000b
* - ZZZZ : Flag position in the ISR register(4bits)
*/
-#define IRDA_IT_ORE ((uint16_t)0x0300)
-#define IRDA_IT_NE ((uint16_t)0x0200)
-#define IRDA_IT_FE ((uint16_t)0x0100)
+#define IRDA_IT_ORE ((uint16_t)0x0300) /*!< IRDA Overrun error interruption */
+#define IRDA_IT_NE ((uint16_t)0x0200) /*!< IRDA Noise error interruption */
+#define IRDA_IT_FE ((uint16_t)0x0100) /*!< IRDA Frame error interruption */
/**
* @}
*/
-
+
/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
* @{
*/
@@ -349,54 +340,96 @@
#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
/**
* @}
- */
-
+ */
-
-/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask
* @{
*/
-#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
-#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
-#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
-#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
- ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
- ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
+#define IRDA_IT_MASK ((uint16_t)0x001F) /*!< IRDA Interruptions flags mask */
/**
* @}
*/
-
-/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
- * @{
- */
-#define IRDA_IT_MASK ((uint16_t)0x001F)
-/**
- * @}
- */
-
+
/**
* @}
*/
-/* Exported macro ------------------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
* @{
*/
-
-/** @brief Reset IRDA handle state
+
+/** @brief Reset IRDA handle state.
* @param __HANDLE__: IRDA handle.
* @retval None
*/
#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
-/** @brief Checks whether the specified IRDA flag is set or not.
+/** @brief Flush the IRDA DR register.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \
+ } while(0)
+
+
+/** @brief Clear the specified IRDA pending flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg IRDA_CLEAR_PEF
+ * @arg IRDA_CLEAR_FEF
+ * @arg IRDA_CLEAR_NEF
+ * @arg IRDA_CLEAR_OREF
+ * @arg IRDA_CLEAR_TCF
+ * @arg IRDA_CLEAR_IDLEF
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF)
+
+
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF)
+
+/** @brief Check whether the specified IRDA flag is set or not.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
- * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
- * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg IRDA_FLAG_REACK: Receive enable acknowledge flag
+ * @arg IRDA_FLAG_TEACK: Transmit enable acknowledge flag
* @arg IRDA_FLAG_BUSY: Busy flag
* @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
* @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
@@ -410,9 +443,10 @@
* @arg IRDA_FLAG_PE: Parity Error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
-#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
-/** @brief Enables the specified IRDA interrupt.
+
+/** @brief Enable the specified IRDA interrupt.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
@@ -430,7 +464,7 @@
((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
-/** @brief Disables the specified IRDA interrupt.
+/** @brief Disable the specified IRDA interrupt.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
@@ -447,9 +481,9 @@
#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
-
-
-/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+
+
+/** @brief Check whether the specified IRDA interrupt has occurred or not.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
@@ -462,12 +496,12 @@
* @arg IRDA_IT_ORE: OverRun Error interrupt
* @arg IRDA_IT_NE: Noise Error interrupt
* @arg IRDA_IT_FE: Framing Error interrupt
- * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
-#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
-/** @brief Checks whether the specified IRDA interrupt source is enabled.
+/** @brief Check whether the specified IRDA interrupt source is enabled or not.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
@@ -480,28 +514,28 @@
* @arg IRDA_IT_ORE: OverRun Error interrupt
* @arg IRDA_IT_NE: Noise Error interrupt
* @arg IRDA_IT_FE: Framing Error interrupt
- * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
-/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
+/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
* to clear the corresponding interrupt
* This parameter can be one of the following values:
- * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
- * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
- * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
- * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
- * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+ * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+ * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+ * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
* @retval None
*/
-#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
/** @brief Set a specific IRDA request flag.
@@ -510,25 +544,39 @@
* UART peripheral
* @param __REQ__: specifies the request flag to set
* This parameter can be one of the following values:
- * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
- * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
- * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
*
* @retval None
- */
-#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
-
+/** @brief Enable the IRDA one bit sample method.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
-/** @brief Enable UART/USART associated to IRDA Handle
+/** @brief Disable the IRDA one bit sample method.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART/USART associated to IRDA Handle.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
* @retval None
- */
+ */
#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
-/** @brief Disable UART/USART associated to IRDA Handle
+/** @brief Disable UART/USART associated to IRDA Handle.
* @param __HANDLE__: specifies the IRDA Handle.
* The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
* UART peripheral
@@ -536,32 +584,112 @@
*/
#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros IRDA Private Macros
+ * @{
+ */
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value.
* @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
* @retval True or False
- */
+ */
#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
-/** @brief Ensure that IRDA prescaler value is strictly larger than 0
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0.
* @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
* @retval True or False
- */
-#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+/**
+ * @brief Ensure that IRDA frame parity is valid.
+ * @param __PARITY__: IRDA frame parity.
+ * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+ */
+#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \
+ ((__PARITY__) == IRDA_PARITY_EVEN) || \
+ ((__PARITY__) == IRDA_PARITY_ODD))
+
+/**
+ * @brief Ensure that IRDA communication mode is valid.
+ * @param __MODE__: IRDA communication mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(IRDA_MODE_TX_RX)))) == (uint32_t)0x00) && ((__MODE__) != (uint32_t)0x00))
+
+/**
+ * @brief Ensure that IRDA power mode is valid.
+ * @param __MODE__: IRDA power mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \
+ ((__MODE__) == IRDA_POWERMODE_NORMAL))
+
+/**
+ * @brief Ensure that IRDA state is valid.
+ * @param __STATE__: IRDA state mode.
+ * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid)
+ */
+#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \
+ ((__STATE__) == IRDA_STATE_ENABLE))
/**
+ * @brief Ensure that IRDA associated UART/USART mode is valid.
+ * @param __MODE__: IRDA associated UART/USART mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \
+ ((__MODE__) == IRDA_MODE_ENABLE))
+
+/**
+ * @brief Ensure that IRDA sampling rate is valid.
+ * @param __ONEBIT__: IRDA sampling rate.
+ * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
+ */
+#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \
+ ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE))
+
+/**
+ * @brief Ensure that IRDA DMA TX mode is valid.
+ * @param __DMATX__: IRDA DMA TX mode.
+ * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid)
+ */
+#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \
+ ((__DMATX__) == IRDA_DMA_TX_ENABLE))
+
+/**
+ * @brief Ensure that IRDA DMA RX mode is valid.
+ * @param __DMARX__: IRDA DMA RX mode.
+ * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid)
+ */
+#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \
+ ((__DMARX__) == IRDA_DMA_RX_ENABLE))
+
+/**
+ * @brief Ensure that IRDA request is valid.
+ * @param __PARAM__: IRDA request.
+ * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+ */
+#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \
+ ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
* @}
*/
/* Include IRDA HAL Extended module */
-#include "stm32f0xx_hal_irda_ex.h"
+#include "stm32f0xx_hal_irda_ex.h"
/* Exported functions --------------------------------------------------------*/
-
/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
* @{
*/
-
-/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+
+/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
@@ -575,7 +703,7 @@
* @}
*/
-/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
* @{
*/
@@ -586,41 +714,48 @@
HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
/**
* @}
*/
-/** @addtogroup IRDA_Exported_Functions_Group3
+/* Peripheral Control functions ************************************************/
+
+/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Error functions
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
-uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
/**
* @}
- */
+ */
/**
* @}
- */
+ */
/**
* @}
- */
+ */
/**
* @}
*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-
+
#ifdef __cplusplus
}
#endif