Duncan Wood
Modified to communicate with open energy monitoring platform
Dependents: Solid_Fuel_Energy_Monitor
Revision 0:37f3683b3648, committed 2022-01-07
- Comitter:
- dswood
- Date:
- Fri Jan 07 12:15:14 2022 +0000
- Commit message:
- Heavily modified RFM69 to transmit and receive open energy monitor signals
Changed in this revision
diff -r 000000000000 -r 37f3683b3648 RFM69.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/RFM69.cpp Fri Jan 07 12:15:14 2022 +0000
@@ -0,0 +1,626 @@
+//Port of RFM69 from lowpowerlab
+//Sync'd Feb. 6, 2015
+//spi register read/write routines from Karl Zweimuller's RF22
+//
+//
+//
+// **********************************************************************************
+// Driver definition for HopeRF RFM69W/RFM69HW/RFM69CW/RFM69HCW, Semtech SX1231/1231H
+// **********************************************************************************
+// Copyright Felix Rusu (2014), felix@lowpowerlab.com
+// http://lowpowerlab.com/
+// **********************************************************************************
+// License
+// **********************************************************************************
+// This program is free software; you can redistribute it
+// and/or modify it under the terms of the GNU General
+// Public License as published by the Free Software
+// Foundation; either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will
+// be useful, but WITHOUT ANY WARRANTY; without even the
+// implied warranty of MERCHANTABILITY or FITNESS FOR A
+// PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General
+// Public License along with this program.
+// If not, see <http://www.gnu.org/licenses/>.
+//
+// Licence can be viewed at
+// http://www.gnu.org/licenses/gpl-3.0.txt
+//
+// Please maintain this license information along with authorship
+// and copyright notices in any redistribution of this code
+// **********************************************************************************// RF22.cpp
+//
+// Copyright (C) 2011 Mike McCauley
+// $Id: RF22.cpp,v 1.17 2013/02/06 21:33:56 mikem Exp mikem $
+// ported to mbed by Karl Zweimueller
+
+
+#include "mbed.h"
+#include "RFM69.h"
+#include <RFM69registers.h>
+#include <SPI.h>
+
+volatile uint8_t RFM69::DATA[RF69_MAX_DATA_LEN];
+volatile uint8_t RFM69::_mode; // current transceiver state
+volatile uint8_t RFM69::DATALEN;
+volatile uint8_t RFM69::SENDERID;
+volatile uint8_t RFM69::TARGETID; // should match _address
+volatile uint8_t RFM69::PAYLOADLEN;
+volatile uint8_t RFM69::ACK_REQUESTED;
+volatile uint8_t RFM69::ACK_RECEIVED; // should be polled immediately after sending a packet with ACK request
+volatile int16_t RFM69::RSSI; // most accurate RSSI during reception (closest to the reception)
+
+RFM69::RFM69(PinName mosi, PinName miso, PinName sclk, PinName slaveSelectPin, PinName interrupt):
+ _slaveSelectPin(slaveSelectPin) , _spi(mosi, miso, sclk), _interrupt(interrupt) {
+
+ // Setup the spi for 8 bit data, high steady state clock,
+ // second edge capture, with a 1MHz clock rate
+ _spi.format(8,0);
+ _spi.frequency(4000000);
+ _mode = RF69_MODE_STANDBY;
+ _promiscuousMode = false;
+ _powerLevel = 31;
+}
+void RFM69::setNodeID(uint8_t nodeID)
+{
+ MyNodeID=nodeID;
+}
+
+bool RFM69::initialize(uint8_t freqBand, uint8_t nodeID, uint8_t networkID)
+{
+ //SS.printf("Init Start\n\r");
+ bool myresult=false;
+ setNodeID(nodeID);
+ MyNetworkID=networkID;
+ unsigned long start_to;
+ const uint8_t CONFIG[][2] =
+ {
+ /* 0x01 */ { REG_OPMODE, RF_OPMODE_SEQUENCER_ON | RF_OPMODE_LISTEN_OFF | RF_OPMODE_STANDBY },
+ /* 0x02 */ { REG_DATAMODUL, RF_DATAMODUL_DATAMODE_PACKET | RF_DATAMODUL_MODULATIONTYPE_FSK | RF_DATAMODUL_MODULATIONSHAPING_00 }, // no shaping
+ /* 0x03 */ { REG_BITRATEMSB, 0x02}, // Same as JeeLib
+ /* 0x04 */ { REG_BITRATELSB, 0x8a}, // 49261
+ /* 0x05 */ { REG_FDEVMSB, RF_FDEVMSB_90000}, // default: 5KHz, (FDEV + BitRate / 2 <= 500KHz)
+ /* 0x06 */ { REG_FDEVLSB, RF_FDEVLSB_90000},
+ {REG_FRFMSB,0x6c},
+ {REG_FRFMID,0x80},
+ {REG_FRFLSB,0x00},
+ /* 0x07 */ //{ REG_FRFMSB, (uint8_t) (freqBand==RF69_315MHZ ? RF_FRFMSB_315 : (freqBand==RF69_433MHZ ? RF_FRFMSB_434 : (freqBand==RF69_868MHZ ? RF_FRFMSB_868 : RF_FRFMSB_915))) },
+ /* 0x08 */ //{ REG_FRFMID, (uint8_t) (freqBand==RF69_315MHZ ? RF_FRFMID_315 : (freqBand==RF69_433MHZ ? RF_FRFMID_434 : (freqBand==RF69_868MHZ ? RF_FRFMID_868 : RF_FRFMID_915))) },
+ /* 0x09 */ //{ REG_FRFLSB, (uint8_t) (freqBand==RF69_315MHZ ? RF_FRFLSB_315 : (freqBand==RF69_433MHZ ? RF_FRFLSB_434 : (freqBand==RF69_868MHZ ? RF_FRFLSB_868 : RF_FRFLSB_915))) },
+
+ /* 0x0B */ { REG_AFCCTRL, RF_AFCCTRL_LOWBETA_ON },
+ // looks like PA1 and PA2 are not implemented on RFM69W, hence the max output power is 13dBm
+ // +17dBm and +20dBm are possible on RFM69HW
+ // +13dBm formula: Pout = -18 + OutputPower (with PA0 or PA1**)
+ // +17dBm formula: Pout = -14 + OutputPower (with PA1 and PA2)**
+ // +20dBm formula: Pout = -11 + OutputPower (with PA1 and PA2)** and high power PA settings (section 3.3.7 in datasheet)
+ /* 0x11 */ { REG_PALEVEL, RF_PALEVEL_PA0_ON | RF_PALEVEL_PA1_OFF | RF_PALEVEL_PA2_OFF | RF_PALEVEL_OUTPUTPOWER_11100},
+ /* 0x13 */ { REG_OCP, RF_OCP_ON | RF_OCP_TRIM_95 }, // over current protection (default is 95mA)
+
+ // RXBW defaults are { REG_RXBW, RF_RXBW_DCCFREQ_010 | RF_RXBW_MANT_24 | RF_RXBW_EXP_5} (RxBw: 10.4KHz)
+ /* 0x19 */ { REG_RXBW, RF_RXBW_DCCFREQ_010 | RF_RXBW_MANT_16 | RF_RXBW_EXP_2 }, // (BitRate < 2 * RxBw)
+ /* 0x1e */ { REG_AFCFEI, RF_AFCFEI_FEI_START | RF_AFCFEI_AFCAUTOCLEAR_ON | RF_AFCFEI_AFCAUTO_ON},
+ //for BR-19200: /* 0x19 */ { REG_RXBW, RF_RXBW_DCCFREQ_010 | RF_RXBW_MANT_24 | RF_RXBW_EXP_3 },
+ /* 0x25 */ { REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_10 | RF_DIOMAPPING1_DIO3_01 | RF_DIOMAPPING1_DIO1_11}, // DIO0 is the only IRQ we're using
+ /* 0x26 */ { REG_DIOMAPPING2, RF_DIOMAPPING2_DIO5_11 | RF_DIOMAPPING2_CLKOUT_OFF }, // DIO5 ClkOut disable for power saving
+ /* 0x28 */ { REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN }, // writing to this bit ensures that the FIFO & status flags are reset
+ /* 0x29 */ { REG_RSSITHRESH, 220 }, // must be set to dBm = (-Sensitivity / 2), default is 0xE4 = 228 so -114dBm
+ ///* 0x2D */ { REG_PREAMBLELSB, RF_PREAMBLESIZE_LSB_VALUE } // default 3 preamble bytes 0xAAAAAA
+ /* 0x2E */ { REG_SYNCCONFIG, RF_SYNC_ON | RF_SYNC_FIFOFILL_AUTO | RF_SYNC_SIZE_3 | RF_SYNC_TOL_0 },
+ /* 0x2F */ { REG_SYNCVALUE1, 0xAA }, // attempt to make this compatible with sync1 byte of RFM12B lib
+ /* 0x30 */ { REG_SYNCVALUE2, 0x2d }, // NETWORK ID
+ /* 0x31 */ { REG_SYNCVALUE3, networkID},
+ /* 0x37 */ { REG_PACKETCONFIG1, RF_PACKET1_FORMAT_FIXED | RF_PACKET1_DCFREE_OFF | RF_PACKET1_CRC_OFF | RF_PACKET1_CRCAUTOCLEAR_ON | RF_PACKET1_ADRSFILTERING_OFF },
+ /* 0x38 */ { REG_PAYLOADLENGTH, 0 }, // in variable length mode: the max frame size, not used in TX
+ ///* 0x39 */ { REG_NODEADRS, nodeID }, // turned off because we're not using address filtering
+ /* 0x3C */ { REG_FIFOTHRESH, RF_FIFOTHRESH_TXSTART_FIFONOTEMPTY | RF_FIFOTHRESH_VALUE }, // TX on FIFO not empty
+ /* 0x3D */ { REG_PACKETCONFIG2, RF_PACKET2_RXRESTARTDELAY_2BITS | RF_PACKET2_AUTORXRESTART_OFF | RF_PACKET2_AES_OFF }, // RXRESTARTDELAY must match transmitter PA ramp-down time (bitrate dependent)
+ //for BR-19200: /* 0x3D */ { REG_PACKETCONFIG2, RF_PACKET2_RXRESTARTDELAY_NONE | RF_PACKET2_AUTORXRESTART_ON | RF_PACKET2_AES_OFF }, // RXRESTARTDELAY must match transmitter PA ramp-down time (bitrate dependent)
+ /* 0x6F */ { REG_TESTDAGC, RF_DAGC_IMPROVED_LOWBETA1 }, // run DAGC continuously in RX mode for Fading Margin Improvement, recommended default for AfcLowBetaOn=0
+ {255, 0}
+ };
+// Timer for ms waits
+ t.start();
+ _slaveSelectPin = 1;
+
+ // Setup the spi for 8 bit data : 1RW-bit 7 adressbit and 8 databit
+ // second edge capture, with a 10MHz clock rate
+ _spi.format(8,0);
+ _spi.frequency(4000000);
+
+#define TIME_OUT 500
+ int j=0;
+ start_to = t.read_ms() ;
+
+ do writeReg(REG_SYNCVALUE1, 0xaa); while (readReg(REG_SYNCVALUE1) != 0xaa && t.read_ms()-start_to < TIME_OUT);
+ if (t.read_ms()-start_to >= TIME_OUT) return myresult;
+ //SS.printf("0xAA written\n\r");
+ // Set time out
+ start_to = t.read_ms() ;
+ do writeReg(REG_SYNCVALUE1, 0x55); while (readReg(REG_SYNCVALUE1) != 0x55 && t.read_ms()-start_to < TIME_OUT);
+ if (t.read_ms()-start_to >= TIME_OUT) return myresult;
+ for (uint8_t i = 0; CONFIG[i][0] != 255; i++){
+ writeReg(CONFIG[i][0], CONFIG[i][1]);
+ j=readReg(CONFIG[i][0]);
+ //SS.printf("reg 0x%04x Value 0x%04x read 0x%04x\n\r",CONFIG[i][0], CONFIG[i][1], j);
+ }// Encryption is persistent between resets and can trip you up during debugging.
+ // Disable it during initialization so we always start from a known state.
+ //encrypt(0);
+readAllRegs();
+ //setHighPower(_isRFM69HW); // called regardless if it's a RFM69W or RFM69HW
+ //setMode(RF69_MODE_STANDBY);
+ // Set up interrupt handler
+ start_to = t.read_ms() ;
+ while (((readReg(REG_IRQFLAGS1) & RF_IRQFLAGS1_MODEREADY) == 0x00) && t.read_ms()-start_to < TIME_OUT); // Wait for ModeReady
+ if (t.read_ms()-start_to >= TIME_OUT) return myresult;
+
+ _interrupt.rise(this, &RFM69::isr0);
+ myresult=true;
+ _address = nodeID;
+ return myresult;
+}
+
+
+// return the frequency (in Hz)
+uint16_t crc16(uint16_t crc, uint8_t a)
+{
+int i;
+
+crc ^= a;
+for (i = 0; i < 8; ++i)
+ {
+ if (crc & 1)
+ crc = (crc >> 1) ^ 0xA001;
+ else
+ crc = (crc >> 1);
+ }
+
+return crc;
+}
+uint32_t RFM69::getFrequency()
+{
+ return RF69_FSTEP * (((uint32_t) readReg(REG_FRFMSB) << 16) + ((uint16_t) readReg(REG_FRFMID) << 8) + readReg(REG_FRFLSB));
+}
+
+// set the frequency (in Hz)
+void RFM69::setFrequency(uint32_t freqHz)
+{
+ uint8_t oldMode = _mode;
+ if (oldMode == RF69_MODE_TX) {
+ setMode(RF69_MODE_RX);
+ }
+ freqHz /= RF69_FSTEP; // divide down by FSTEP to get FRF
+ writeReg(REG_FRFMSB, freqHz >> 16);
+ writeReg(REG_FRFMID, freqHz >> 8);
+ writeReg(REG_FRFLSB, freqHz);
+ if (oldMode == RF69_MODE_RX) {
+ setMode(RF69_MODE_SYNTH);
+ }
+ setMode(oldMode);
+}
+
+void RFM69::setMode(uint8_t newMode)
+{
+ if (newMode == _mode)
+ return;
+
+ switch (newMode) {
+ case RF69_MODE_TX:
+ writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_TRANSMITTER);
+ if (_isRFM69HW) setHighPowerRegs(true);
+ break;
+ case RF69_MODE_RX:
+ writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_RECEIVER);
+ if (_isRFM69HW) setHighPowerRegs(false);
+ break;
+ case RF69_MODE_SYNTH:
+ writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_SYNTHESIZER);
+ break;
+ case RF69_MODE_STANDBY:
+ writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_STANDBY);
+ break;
+ case RF69_MODE_SLEEP:
+ writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_SLEEP);
+ break;
+ default:
+ return;
+ }
+
+ // we are using packet mode, so this check is not really needed
+ // but waiting for mode ready is necessary when going from sleep because the FIFO may not be immediately available from previous mode
+ while (_mode == RF69_MODE_SLEEP && (readReg(REG_IRQFLAGS1) & RF_IRQFLAGS1_MODEREADY) == 0x00); // wait for ModeReady
+ _mode = newMode;
+}
+
+void RFM69::sleep(bool onOFF) {
+ if (onOFF) setMode(RF69_MODE_SLEEP);
+ else setMode(RF69_MODE_STANDBY);
+}
+
+void RFM69::setAddress(uint8_t addr)
+{
+ _address = addr;
+ writeReg(REG_NODEADRS, _address);
+}
+
+void RFM69::setNetwork(uint8_t networkID)
+{
+ writeReg(REG_SYNCVALUE2, networkID);
+}
+
+// set output power: 0 = min, 31 = max
+// this results in a "weaker" transmitted signal, and directly results in a lower RSSI at the receiver
+void RFM69::setPowerLevel(uint8_t powerLevel)
+{
+ _powerLevel = powerLevel;
+ writeReg(REG_PALEVEL, (readReg(REG_PALEVEL) & 0xE0) | (_powerLevel > 31 ? 31 : _powerLevel));
+}
+
+bool RFM69::canSend()
+{
+ if (_mode == RF69_MODE_RX && PAYLOADLEN == 0 && readRSSI() < CSMA_LIMIT) // if signal stronger than -100dBm is detected assume channel activity
+ {
+ setMode(RF69_MODE_STANDBY);
+ return true;
+ }
+ return false;
+}
+
+void RFM69::send(uint8_t toAddress, const void* buffer, uint8_t bufferSize, bool requestACK)
+{
+ writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFB) | RF_PACKET2_RXRESTART); // avoid RX deadlocks
+ uint32_t now = t.read_ms();
+ while (!canSend() && t.read_ms() - now < RF69_CSMA_LIMIT_MS) receiveDone();
+ sendFrame(toAddress, buffer, bufferSize, requestACK, false);
+}
+
+// to increase the chance of getting a packet across, call this function instead of send
+// and it handles all the ACK requesting/retrying for you :)
+// The only twist is that you have to manually listen to ACK requests on the other side and send back the ACKs
+// The reason for the semi-automaton is that the lib is interrupt driven and
+// requires user action to read the received data and decide what to do with it
+// replies usually take only 5..8ms at 50kbps@915MHz
+bool RFM69::sendWithRetry(uint8_t toAddress, const void* buffer, uint8_t bufferSize, uint8_t retries, uint8_t retryWaitTime) {
+ uint32_t sentTime;
+ for (uint8_t i = 0; i <= retries; i++)
+ {
+ send(toAddress, buffer, bufferSize, true);
+ sentTime = t.read_ms();
+ while (t.read_ms() - sentTime < retryWaitTime)
+ {
+ if (ACKReceived(toAddress))
+ {
+ //Serial.print(" ~ms:"); Serial.print(t.read_ms() - sentTime);
+ return true;
+ }
+ }
+ //Serial.print(" RETRY#"); Serial.println(i + 1);
+ }
+ return false;
+}
+
+// should be polled immediately after sending a packet with ACK request
+bool RFM69::ACKReceived(uint8_t fromNodeID) {
+ if (receiveDone())
+ return (SENDERID == fromNodeID || fromNodeID == RF69_BROADCAST_ADDR) && ACK_RECEIVED;
+ return false;
+}
+
+// check whether an ACK was requested in the last received packet (non-broadcasted packet)
+bool RFM69::ACKRequested() {
+ return ACK_REQUESTED && (TARGETID != RF69_BROADCAST_ADDR);
+}
+
+// should be called immediately after reception in case sender wants ACK
+void RFM69::sendACK(const void* buffer, uint8_t bufferSize) {
+ uint8_t sender = SENDERID;
+ int16_t _RSSI = RSSI; // save payload received RSSI value
+ writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFB) | RF_PACKET2_RXRESTART); // avoid RX deadlocks
+ uint32_t now = t.read_ms();
+ while (!canSend() && t.read_ms() - now < RF69_CSMA_LIMIT_MS) receiveDone();
+ sendFrame(sender, buffer, bufferSize, false, true);
+ RSSI = _RSSI; // restore payload RSSI
+}
+
+void RFM69::sendFrame(uint8_t toAddress, const void* buffer, uint8_t bufferSize, bool requestACK, bool sendACK)
+{
+ // Serial Ser(USBTX,USBRX);
+ // Ser.baud(115200);
+ char MyBuff[50];
+ int TXStart = t.read_ms() ;
+ //Ser.printf("sendFrame address %d size %d\n\r",toAddress,bufferSize);
+ setMode(RF69_MODE_STANDBY); // turn off receiver to prevent reception while filling fifo
+ while ((readReg(REG_IRQFLAGS1) & RF_IRQFLAGS1_MODEREADY) == 0x00)wait_us(10); // wait for ModeReady
+ writeReg(REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_00); // DIO0 is "Packet Sent"
+ //if (bufferSize > RF69_MAX_DATA_LEN) bufferSize = RF69_MAX_DATA_LEN;
+uint8_t txstate = 0, i = 0,next=0,j=0;
+uint16_t crc=crc16(0xffff,MyNetworkID);
+uint8_t parity=MyNetworkID^(MyNetworkID<<4);
+parity=parity^(parity<<2);//2 bit even parity in bit 6 and 7 msb
+fifoFlush();
+setMode(RF69_MODE_TX);
+//while (readReg(REG_IRQFLAGS1 & RF_IRQFLAGS1_MODEREADY) == 0x00 && t.read_ms()-TXStart < TIME_OUT)
+//{
+//wait_us(10);
+//}
+//Ser.printf("Reg val %d \n\r",bufferSize);
+while(txstate < 7)
+{
+
+ if ((readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_FIFOFULL) == 0)
+ {
+ switch(txstate)
+ {
+ case 0: next=MyNodeID ; txstate++; break;
+ case 1: next=(bufferSize); txstate++; break;
+ case 2: next=((uint8_t*)buffer)[i++]; if(i==bufferSize) txstate++; break;
+ case 3: next=(uint8_t)crc; txstate++; break;
+ case 4: next=(uint8_t)(crc>>8); txstate++; break;
+ case 5:
+ case 6: next=0xAA; txstate++; break; // dummy bytes (if < 2, locks up)
+ }
+ if(txstate<4) crc = crc16(crc, next);
+ writeReg(REG_FIFO, next);
+ MyBuff[j++]=next;
+ //Ser.printf("state %d count %d Data %d \n\r",txstate,i,next);
+ }
+ else {
+ wait_us(100);// fifo is full wait until it is transmitted
+ }
+}
+//Ser.printf("length %d \n\r",j);
+for (i=0; i<j; i++)
+{
+ // Ser.printf("count %d val %d\n\r",i,MyBuff[i]);
+}
+//setMode(RF69_MODE_TX);
+//writeReg(REG_OPMODE, (readReg(REG_OPMODE) & 0xE3) | RF_OPMODE_TRANSMITTER);
+while (_interrupt == 0 && t.read_ms() - TXStart < RF69_TX_LIMIT_MS)wait_us(10); // wait for DIO0 to turn HIGH signalling transmission finish
+setMode(RF69_MODE_STANDBY);
+//writeReg(REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_00);
+ /*// control byte
+ uint8_t CTLbyte = 0x00;
+ if (sendACK)
+ CTLbyte = 0x80;
+ else if (requestACK)
+ CTLbyte = 0x40;
+
+ select();
+ _spi.write(REG_FIFO | 0x80);
+ _spi.write(bufferSize + 3);
+ _spi.write(toAddress);
+ _spi.write(_address);
+ _spi.write(CTLbyte);
+
+ for (uint8_t i = 0; i < bufferSize; i++)
+ _spi.write(((uint8_t*) buffer)[i]);
+ unselect();
+
+ // no need to wait for transmit mode to be ready since its handled by the radio
+ setMode(RF69_MODE_TX);
+ uint32_t txStart = t.read_ms();
+ while (_interrupt == 0 && t.read_ms() - txStart < RF69_TX_LIMIT_MS); // wait for DIO0 to turn HIGH signalling transmission finish
+ //while (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PACKETSENT == 0x00); // wait for ModeReady
+ setMode(RF69_MODE_STANDBY);
+*/
+
+}
+// ON = disable filtering to capture all frames on network
+// OFF = enable node/broadcast filtering to capture only frames sent to this/broadcast address
+void RFM69::promiscuous(bool onOff) {
+ _promiscuousMode = onOff;
+ //writeReg(REG_PACKETCONFIG1, (readReg(REG_PACKETCONFIG1) & 0xF9) | (onOff ? RF_PACKET1_ADRSFILTERING_OFF : RF_PACKET1_ADRSFILTERING_NODEBROADCAST));
+}
+
+void RFM69::setHighPower(bool onOff) {
+ _isRFM69HW = onOff;
+ writeReg(REG_OCP, _isRFM69HW ? RF_OCP_OFF : RF_OCP_ON);
+ if (_isRFM69HW) // turning ON
+ writeReg(REG_PALEVEL, (readReg(REG_PALEVEL) & 0x1F) | RF_PALEVEL_PA1_ON | RF_PALEVEL_PA2_ON); // enable P1 & P2 amplifier stages
+ else
+ writeReg(REG_PALEVEL, RF_PALEVEL_PA0_ON | RF_PALEVEL_PA1_OFF | RF_PALEVEL_PA2_OFF | _powerLevel); // enable P0 only
+}
+
+void RFM69::setHighPowerRegs(bool onOff) {
+ writeReg(REG_TESTPA1, onOff ? 0x5D : 0x55);
+ writeReg(REG_TESTPA2, onOff ? 0x7C : 0x70);
+}
+
+/*
+void RFM69::setCS(uint8_t newSPISlaveSelect) {
+ DigitalOut _slaveSelectPin(newSPISlaveSelect);
+ _slaveSelectPin = 1;
+}
+*/
+// for debugging
+void RFM69::readAllRegs( )
+{
+ uint8_t regVal,regAddr;
+
+ for (regAddr = 1; regAddr <= 0x4F; regAddr++)
+ {
+ select();
+ _spi.write(regAddr & 0x7F); // send address + r/w bit
+ regVal = _spi.write(0);
+ //SD.printf("ADDR 0x%02x REG 0x%02x \n\r",regAddr,regVal);
+ /* Serial.print(regAddr, HEX);
+ Serial.print(" - ");
+ Serial.print(regVal,HEX);
+ Serial.print(" - ");
+ Serial.println(regVal,BIN);*/
+ unselect();
+ }
+
+}
+
+uint8_t RFM69::readTemperature(int8_t calFactor) // returns centigrade
+{
+ uint8_t oldMode = _mode;
+
+ setMode(RF69_MODE_STANDBY);
+ writeReg(REG_TEMP1, RF_TEMP1_MEAS_START);
+ while ((readReg(REG_TEMP1) & RF_TEMP1_MEAS_RUNNING));
+ setMode(oldMode);
+
+ return ~readReg(REG_TEMP2) + COURSE_TEMP_COEF + calFactor; // 'complement' corrects the slope, rising temp = rising val
+} // COURSE_TEMP_COEF puts reading in the ballpark, user can add additional correction
+
+void RFM69::rcCalibration()
+{
+ writeReg(REG_OSC1, RF_OSC1_RCCAL_START);
+ while ((readReg(REG_OSC1) & RF_OSC1_RCCAL_DONE) == 0x00);
+}
+// C++ level interrupt handler for this instance
+void RFM69::interruptHandler() {
+
+ if (_mode == RF69_MODE_RX && (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PAYLOADREADY))
+ {
+ setMode(RF69_MODE_STANDBY);
+ select();
+
+ _spi.write(REG_FIFO & 0x7F);
+ PAYLOADLEN = _spi.write(0);
+ PAYLOADLEN = PAYLOADLEN > 66 ? 66 : PAYLOADLEN; // precaution
+ TARGETID = _spi.write(0);
+ if(!(_promiscuousMode || TARGETID == _address || TARGETID == RF69_BROADCAST_ADDR) // match this node's address, or broadcast address or anything in promiscuous mode
+ || PAYLOADLEN < 3) // address situation could receive packets that are malformed and don't fit this libraries extra fields
+ {
+ PAYLOADLEN = 0;
+ unselect();
+ receiveBegin();
+ return;
+ }
+
+ DATALEN = PAYLOADLEN - 3;
+ SENDERID = _spi.write(0);
+ uint8_t CTLbyte = _spi.write(0);
+
+ ACK_RECEIVED = CTLbyte & 0x80; // extract ACK-received flag
+ ACK_REQUESTED = CTLbyte & 0x40; // extract ACK-requested flag
+
+ for (uint8_t i = 0; i < DATALEN; i++)
+ {
+ DATA[i] = _spi.write(0);
+ }
+ if (DATALEN < RF69_MAX_DATA_LEN) DATA[DATALEN] = 0; // add null at end of string
+ unselect();
+ setMode(RF69_MODE_RX);
+ }
+ RSSI = readRSSI();
+}
+
+
+// These are low level functions that call the interrupt handler for the correct instance of RFM69.
+void RFM69::isr0()
+{
+ interruptHandler();
+}
+void RFM69::receiveBegin() {
+ DATALEN = 0;
+ SENDERID = 0;
+ TARGETID = 0;
+ PAYLOADLEN = 0;
+ ACK_REQUESTED = 0;
+ ACK_RECEIVED = 0;
+ RSSI = 0;
+ if (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PAYLOADREADY)
+ writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFB) | RF_PACKET2_RXRESTART); // avoid RX deadlocks
+ writeReg(REG_DIOMAPPING1, RF_DIOMAPPING1_DIO0_01); // set DIO0 to "PAYLOADREADY" in receive mode
+ setMode(RF69_MODE_RX);
+ _interrupt.enable_irq();
+}
+
+bool RFM69::receiveDone() {
+ _interrupt.disable_irq(); // re-enabled in unselect() via setMode() or via receiveBegin()
+ if (_mode == RF69_MODE_RX && PAYLOADLEN > 0)
+ {
+ setMode(RF69_MODE_STANDBY); // enables interrupts
+ return true;
+ }
+ else if (_mode == RF69_MODE_RX) // already in RX no payload yet
+ {
+ _interrupt.enable_irq(); // explicitly re-enable interrupts
+ return false;
+ }
+ receiveBegin();
+ return false;
+}
+
+// To enable encryption: radio.encrypt("ABCDEFGHIJKLMNOP");
+// To disable encryption: radio.encrypt(null) or radio.encrypt(0)
+// KEY HAS TO BE 16 bytes !!!
+void RFM69::encrypt(const char* key) {
+ setMode(RF69_MODE_STANDBY);
+ if (key != 0)
+ {
+ select();
+ _spi.write(REG_AESKEY1 | 0x80);
+ for (uint8_t i = 0; i < 16; i++)
+ _spi.write(key[i]);
+ unselect();
+ }
+ writeReg(REG_PACKETCONFIG2, (readReg(REG_PACKETCONFIG2) & 0xFE) | (key ? 1 : 0));
+}
+
+int16_t RFM69::readRSSI(bool forceTrigger) {
+ int16_t rssi = 0;
+ if (forceTrigger)
+ {
+ // RSSI trigger not needed if DAGC is in continuous mode
+ writeReg(REG_RSSICONFIG, RF_RSSI_START);
+ while ((readReg(REG_RSSICONFIG) & RF_RSSI_DONE) == 0x00); // wait for RSSI_Ready
+ }
+ rssi = -readReg(REG_RSSIVALUE);
+ rssi >>= 1;
+ return rssi;
+}
+
+uint8_t RFM69::readReg(uint8_t addr)
+{
+ select();
+ _spi.write(addr & 0x7F); // Send the address with the write mask off
+ uint8_t val = _spi.write(0); // The written value is ignored, reg value is read
+ unselect();
+ return val;
+}
+
+void RFM69::writeReg(uint8_t addr, uint8_t value)
+{
+ select();
+ _spi.write(addr | 0x80); // Send the address with the write mask on
+ _spi.write(value); // New value follows
+ unselect();
+ }
+
+// select the transceiver
+void RFM69::select() {
+ _interrupt.disable_irq(); // Disable Interrupts
+/* // set RFM69 SPI settings
+ SPI.setDataMode(SPI_MODE0);
+ SPI.setBitOrder(MSBFIRST);
+ SPI.setClockDivider(SPI_CLOCK_DIV4); // decided to slow down from DIV2 after SPI stalling in some instances, especially visible on mega1284p when RFM69 and FLASH chip both present */
+ _slaveSelectPin = 0;
+}
+
+// UNselect the transceiver chip
+void RFM69::unselect() {
+ _slaveSelectPin = 1;
+ _interrupt.enable_irq(); // Enable Interrupts
+}
+void RFM69::sendWait()
+ {
+ while (readReg(REG_IRQFLAGS2) & RF_IRQFLAGS2_PACKETSENT)
+ {
+ wait_ms(1);
+ };
+}
+void RFM69::fifoFlush()
+{
+ while (readReg(REG_IRQFLAGS2) & (RF_IRQFLAGS2_FIFONOTEMPTY | RF_IRQFLAGS2_FIFOOVERRUN))
+ readReg(REG_FIFO);
+}
\ No newline at end of file
diff -r 000000000000 -r 37f3683b3648 RFM69.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/RFM69.h Fri Jan 07 12:15:14 2022 +0000
@@ -0,0 +1,126 @@
+// **********************************************************************************
+// Driver definition for HopeRF RFM69W/RFM69HW/RFM69CW/RFM69HCW, Semtech SX1231/1231H
+// **********************************************************************************
+// Copyright Felix Rusu (2014), felix@lowpowerlab.com
+// http://lowpowerlab.com/
+// **********************************************************************************
+// License
+// **********************************************************************************
+// This program is free software; you can redistribute it
+// and/or modify it under the terms of the GNU General
+// Public License as published by the Free Software
+// Foundation; either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will
+// be useful, but WITHOUT ANY WARRANTY; without even the
+// implied warranty of MERCHANTABILITY or FITNESS FOR A
+// PARTICULAR PURPOSE. See the GNU General Public
+// License for more details.
+//
+// You should have received a copy of the GNU General
+// Public License along with this program.
+// If not, see <http://www.gnu.org/licenses/>.
+//
+// Licence can be viewed at
+// http://www.gnu.org/licenses/gpl-3.0.txt
+//
+// Please maintain this license information along with authorship
+// and copyright notices in any redistribution of this code
+// **********************************************************************************
+#ifndef RFM69_h
+#define RFM69_h
+#include <mbed.h> // assumes Arduino IDE v1.0 or greater
+
+#define RF69_MAX_DATA_LEN 61 // to take advantage of the built in AES/CRC we want to limit the frame size to the internal FIFO size (66 bytes - 3 bytes overhead - 2 bytes crc)
+//#define RF69_SPI_CS SS // SS is the SPI slave select pin, for instance D10 on ATmega328
+
+#define CSMA_LIMIT -90 // upper RX signal sensitivity threshold in dBm for carrier sense access
+#define RF69_MODE_SLEEP 0 // XTAL OFF
+#define RF69_MODE_STANDBY 1 // XTAL ON
+#define RF69_MODE_SYNTH 2 // PLL ON
+#define RF69_MODE_RX 3 // RX MODE
+#define RF69_MODE_TX 4 // TX MODE
+
+// available frequency bands
+#define RF69_315MHZ 31 // non trivial values to avoid misconfiguration
+#define RF69_433MHZ 43
+#define RF69_868MHZ 86
+#define RF69_915MHZ 91
+
+#define null 0
+#define COURSE_TEMP_COEF -90 // puts the temperature reading in the ballpark, user can fine tune the returned value
+#define RF69_BROADCAST_ADDR 255
+#define RF69_CSMA_LIMIT_MS 1000
+#define RF69_TX_LIMIT_MS 1000
+#define RF69_FSTEP 61.03515625 // == FXOSC / 2^19 = 32MHz / 2^19 (p13 in datasheet)
+
+class RFM69 {
+ public:
+ static volatile uint8_t DATA[RF69_MAX_DATA_LEN]; // recv/xmit buf, including header & crc bytes
+ static volatile uint8_t DATALEN;
+ static volatile uint8_t SENDERID;
+ static volatile uint8_t TARGETID; // should match _address
+ static volatile uint8_t PAYLOADLEN;
+ static volatile uint8_t ACK_REQUESTED;
+ static volatile uint8_t ACK_RECEIVED; // should be polled immediately after sending a packet with ACK request
+ static volatile int16_t RSSI; // most accurate RSSI during reception (closest to the reception)
+ static volatile uint8_t _mode; // should be protected?
+
+
+ RFM69(PinName mosi, PinName miso, PinName sclk, PinName slaveSelectPin, PinName interrupt);
+
+ bool initialize(uint8_t freqBand, uint8_t ID, uint8_t networkID=1);
+ void setAddress(uint8_t addr);
+ void setNetwork(uint8_t networkID);
+ bool canSend();
+ void send(uint8_t toAddress, const void* buffer, uint8_t bufferSize, bool requestACK=false);
+ bool sendWithRetry(uint8_t toAddress, const void* buffer, uint8_t bufferSize, uint8_t retries=2, uint8_t retryWaitTime=40); // 40ms roundtrip req for 61byte packets
+ bool receiveDone();
+ bool ACKReceived(uint8_t fromNodeID);
+ bool ACKRequested();
+ void sendACK(const void* buffer = "", uint8_t bufferSize=0);
+ uint32_t getFrequency();
+ void setFrequency(uint32_t freqHz);
+ void encrypt(const char* key);
+// void setCS(uint8_t newSPISlaveSelect);
+ int16_t readRSSI(bool forceTrigger=false);
+ void promiscuous(bool onOff=true);
+ void setHighPower(bool onOFF=true); // has to be called after initialize() for RFM69HW
+ void setPowerLevel(uint8_t level); // reduce/increase transmit power level
+ void sleep(bool onOFF=true);
+ uint8_t readTemperature(int8_t calFactor=0); // get CMOS temperature (8bit)
+ void rcCalibration(); // calibrate the internal RC oscillator for use in wide temperature variations - see datasheet section [4.3.5. RC Timer Accuracy]
+
+ // allow hacking registers by making these public
+ uint8_t readReg(uint8_t addr);
+ void writeReg(uint8_t addr, uint8_t val);
+ void readAllRegs();
+ void sendWait();
+ void setNodeID(uint8_t nodeID);
+
+ protected:
+ void isr0();
+ void virtual interruptHandler();
+ void sendFrame(uint8_t toAddress, const void* buffer, uint8_t size, bool requestACK=false, bool sendACK=false);
+ void fifoFlush();
+
+ static RFM69* selfPointer;
+ DigitalOut _slaveSelectPin;
+ InterruptIn _interrupt;
+ uint8_t _address;
+ Timer t;
+ bool _promiscuousMode;
+ uint8_t _powerLevel;
+ bool _isRFM69HW;
+ SPI _spi;
+ void receiveBegin();
+ void setMode(uint8_t mode);
+ void setHighPowerRegs(bool onOff);
+ void select();
+ void unselect();
+ uint8_t MyNodeID;
+ uint8_t MyNetworkID;
+};
+
+#endif
diff -r 000000000000 -r 37f3683b3648 RFM69registers.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/RFM69registers.h Fri Jan 07 12:15:14 2022 +0000 @@ -0,0 +1,1109 @@ +// ********************************************************************************** +// Registers used in driver definition for HopeRF RFM69W/RFM69HW, Semtech SX1231/1231H +// ********************************************************************************** +// Copyright Felix Rusu (2015), felix@lowpowerlab.com +// http://lowpowerlab.com/ +// ********************************************************************************** +// License +// ********************************************************************************** +// This program is free software; you can redistribute it +// and/or modify it under the terms of the GNU General +// Public License as published by the Free Software +// Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will +// be useful, but WITHOUT ANY WARRANTY; without even the +// implied warranty of MERCHANTABILITY or FITNESS FOR A +// PARTICULAR PURPOSE. See the GNU General Public +// License for more details. +// +// You should have received a copy of the GNU General +// Public License along with this program; if not, write +// to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// +// Licence can be viewed at +// http://www.fsf.org/licenses/gpl.txt +// +// Please maintain this license information along with authorship +// and copyright notices in any redistribution of this code +// ********************************************************************************** +// RFM69/SX1231 Internal registers addresses +//************************************************** +#define REG_FIFO 0x00 +#define REG_OPMODE 0x01 +#define REG_DATAMODUL 0x02 +#define REG_BITRATEMSB 0x03 +#define REG_BITRATELSB 0x04 +#define REG_FDEVMSB 0x05 +#define REG_FDEVLSB 0x06 +#define REG_FRFMSB 0x07 +#define REG_FRFMID 0x08 +#define REG_FRFLSB 0x09 +#define REG_OSC1 0x0A +#define REG_AFCCTRL 0x0B +#define REG_LOWBAT 0x0C +#define REG_LISTEN1 0x0D +#define REG_LISTEN2 0x0E +#define REG_LISTEN3 0x0F +#define REG_VERSION 0x10 +#define REG_PALEVEL 0x11 +#define REG_PARAMP 0x12 +#define REG_OCP 0x13 +#define REG_AGCREF 0x14 // not present on RFM69/SX1231 +#define REG_AGCTHRESH1 0x15 // not present on RFM69/SX1231 +#define REG_AGCTHRESH2 0x16 // not present on RFM69/SX1231 +#define REG_AGCTHRESH3 0x17 // not present on RFM69/SX1231 +#define REG_LNA 0x18 +#define REG_RXBW 0x19 +#define REG_AFCBW 0x1A +#define REG_OOKPEAK 0x1B +#define REG_OOKAVG 0x1C +#define REG_OOKFIX 0x1D +#define REG_AFCFEI 0x1E +#define REG_AFCMSB 0x1F +#define REG_AFCLSB 0x20 +#define REG_FEIMSB 0x21 +#define REG_FEILSB 0x22 +#define REG_RSSICONFIG 0x23 +#define REG_RSSIVALUE 0x24 +#define REG_DIOMAPPING1 0x25 +#define REG_DIOMAPPING2 0x26 +#define REG_IRQFLAGS1 0x27 +#define REG_IRQFLAGS2 0x28 +#define REG_RSSITHRESH 0x29 +#define REG_RXTIMEOUT1 0x2A +#define REG_RXTIMEOUT2 0x2B +#define REG_PREAMBLEMSB 0x2C +#define REG_PREAMBLELSB 0x2D +#define REG_SYNCCONFIG 0x2E +#define REG_SYNCVALUE1 0x2F +#define REG_SYNCVALUE2 0x30 +#define REG_SYNCVALUE3 0x31 +#define REG_SYNCVALUE4 0x32 +#define REG_SYNCVALUE5 0x33 +#define REG_SYNCVALUE6 0x34 +#define REG_SYNCVALUE7 0x35 +#define REG_SYNCVALUE8 0x36 +#define REG_PACKETCONFIG1 0x37 +#define REG_PAYLOADLENGTH 0x38 +#define REG_NODEADRS 0x39 +#define REG_BROADCASTADRS 0x3A +#define REG_AUTOMODES 0x3B +#define REG_FIFOTHRESH 0x3C +#define REG_PACKETCONFIG2 0x3D +#define REG_AESKEY1 0x3E +#define REG_AESKEY2 0x3F +#define REG_AESKEY3 0x40 +#define REG_AESKEY4 0x41 +#define REG_AESKEY5 0x42 +#define REG_AESKEY6 0x43 +#define REG_AESKEY7 0x44 +#define REG_AESKEY8 0x45 +#define REG_AESKEY9 0x46 +#define REG_AESKEY10 0x47 +#define REG_AESKEY11 0x48 +#define REG_AESKEY12 0x49 +#define REG_AESKEY13 0x4A +#define REG_AESKEY14 0x4B +#define REG_AESKEY15 0x4C +#define REG_AESKEY16 0x4D +#define REG_TEMP1 0x4E +#define REG_TEMP2 0x4F +#define REG_TESTLNA 0x58 +#define REG_TESTPA1 0x5A // only present on RFM69HW/SX1231H +#define REG_TESTPA2 0x5C // only present on RFM69HW/SX1231H +#define REG_TESTDAGC 0x6F + +//****************************************************** +// RF69/SX1231 bit control definition +//****************************************************** + +// RegOpMode +#define RF_OPMODE_SEQUENCER_OFF 0x80 +#define RF_OPMODE_SEQUENCER_ON 0x00 // Default + +#define RF_OPMODE_LISTEN_ON 0x40 +#define RF_OPMODE_LISTEN_OFF 0x00 // Default + +#define RF_OPMODE_LISTENABORT 0x20 + +#define RF_OPMODE_SLEEP 0x00 +#define RF_OPMODE_STANDBY 0x04 // Default +#define RF_OPMODE_SYNTHESIZER 0x08 +#define RF_OPMODE_TRANSMITTER 0x0C +#define RF_OPMODE_RECEIVER 0x10 + + +// RegDataModul +#define RF_DATAMODUL_DATAMODE_PACKET 0x00 // Default +#define RF_DATAMODUL_DATAMODE_CONTINUOUS 0x40 +#define RF_DATAMODUL_DATAMODE_CONTINUOUSNOBSYNC 0x60 + +#define RF_DATAMODUL_MODULATIONTYPE_FSK 0x00 // Default +#define RF_DATAMODUL_MODULATIONTYPE_OOK 0x08 + +#define RF_DATAMODUL_MODULATIONSHAPING_00 0x00 // Default +#define RF_DATAMODUL_MODULATIONSHAPING_01 0x01 +#define RF_DATAMODUL_MODULATIONSHAPING_10 0x02 +#define RF_DATAMODUL_MODULATIONSHAPING_11 0x03 + + +// RegBitRate (bits/sec) example bit rates +#define RF_BITRATEMSB_1200 0x68 +#define RF_BITRATELSB_1200 0x2B +#define RF_BITRATEMSB_2400 0x34 +#define RF_BITRATELSB_2400 0x15 +#define RF_BITRATEMSB_4800 0x1A // Default +#define RF_BITRATELSB_4800 0x0B // Default +#define RF_BITRATEMSB_9600 0x0D +#define RF_BITRATELSB_9600 0x05 +#define RF_BITRATEMSB_19200 0x06 +#define RF_BITRATELSB_19200 0x83 +#define RF_BITRATEMSB_38400 0x03 +#define RF_BITRATELSB_38400 0x41 + +#define RF_BITRATEMSB_38323 0x03 +#define RF_BITRATELSB_38323 0x43 + +#define RF_BITRATEMSB_34482 0x03 +#define RF_BITRATELSB_34482 0xA0 + +#define RF_BITRATEMSB_76800 0x01 +#define RF_BITRATELSB_76800 0xA1 +#define RF_BITRATEMSB_153600 0x00 +#define RF_BITRATELSB_153600 0xD0 +#define RF_BITRATEMSB_57600 0x02 +#define RF_BITRATELSB_57600 0x2C +#define RF_BITRATEMSB_115200 0x01 +#define RF_BITRATELSB_115200 0x16 +#define RF_BITRATEMSB_12500 0x0A +#define RF_BITRATELSB_12500 0x00 +#define RF_BITRATEMSB_25000 0x05 +#define RF_BITRATELSB_25000 0x00 +#define RF_BITRATEMSB_50000 0x02 +#define RF_BITRATELSB_50000 0x80 +#define RF_BITRATEMSB_100000 0x01 +#define RF_BITRATELSB_100000 0x40 +#define RF_BITRATEMSB_150000 0x00 +#define RF_BITRATELSB_150000 0xD5 +#define RF_BITRATEMSB_200000 0x00 +#define RF_BITRATELSB_200000 0xA0 +#define RF_BITRATEMSB_250000 0x00 +#define RF_BITRATELSB_250000 0x80 +#define RF_BITRATEMSB_300000 0x00 +#define RF_BITRATELSB_300000 0x6B +#define RF_BITRATEMSB_32768 0x03 +#define RF_BITRATELSB_32768 0xD1 +// custom bit rates +#define RF_BITRATEMSB_55555 0x02 +#define RF_BITRATELSB_55555 0x40 +#define RF_BITRATEMSB_200KBPS 0x00 +#define RF_BITRATELSB_200KBPS 0xa0 + + +// RegFdev - frequency deviation (Hz) +#define RF_FDEVMSB_2000 0x00 +#define RF_FDEVLSB_2000 0x21 +#define RF_FDEVMSB_5000 0x00 // Default +#define RF_FDEVLSB_5000 0x52 // Default +#define RF_FDEVMSB_7500 0x00 +#define RF_FDEVLSB_7500 0x7B +#define RF_FDEVMSB_10000 0x00 +#define RF_FDEVLSB_10000 0xA4 +#define RF_FDEVMSB_15000 0x00 +#define RF_FDEVLSB_15000 0xF6 +#define RF_FDEVMSB_20000 0x01 +#define RF_FDEVLSB_20000 0x48 +#define RF_FDEVMSB_25000 0x01 +#define RF_FDEVLSB_25000 0x9A +#define RF_FDEVMSB_30000 0x01 +#define RF_FDEVLSB_30000 0xEC +#define RF_FDEVMSB_35000 0x02 +#define RF_FDEVLSB_35000 0x3D +#define RF_FDEVMSB_40000 0x02 +#define RF_FDEVLSB_40000 0x8F +#define RF_FDEVMSB_45000 0x02 +#define RF_FDEVLSB_45000 0xE1 +#define RF_FDEVMSB_50000 0x03 +#define RF_FDEVLSB_50000 0x33 +#define RF_FDEVMSB_55000 0x03 +#define RF_FDEVLSB_55000 0x85 +#define RF_FDEVMSB_60000 0x03 +#define RF_FDEVLSB_60000 0xD7 +#define RF_FDEVMSB_65000 0x04 +#define RF_FDEVLSB_65000 0x29 +#define RF_FDEVMSB_70000 0x04 +#define RF_FDEVLSB_70000 0x7B +#define RF_FDEVMSB_75000 0x04 +#define RF_FDEVLSB_75000 0xCD +#define RF_FDEVMSB_80000 0x05 +#define RF_FDEVLSB_80000 0x1F +#define RF_FDEVMSB_85000 0x05 +#define RF_FDEVLSB_85000 0x71 +#define RF_FDEVMSB_90000 0x05 +#define RF_FDEVLSB_90000 0xC3 +#define RF_FDEVMSB_95000 0x06 +#define RF_FDEVLSB_95000 0x14 +#define RF_FDEVMSB_100000 0x06 +#define RF_FDEVLSB_100000 0x66 +#define RF_FDEVMSB_110000 0x07 +#define RF_FDEVLSB_110000 0x0A +#define RF_FDEVMSB_120000 0x07 +#define RF_FDEVLSB_120000 0xAE +#define RF_FDEVMSB_130000 0x08 +#define RF_FDEVLSB_130000 0x52 +#define RF_FDEVMSB_140000 0x08 +#define RF_FDEVLSB_140000 0xF6 +#define RF_FDEVMSB_150000 0x09 +#define RF_FDEVLSB_150000 0x9A +#define RF_FDEVMSB_160000 0x0A +#define RF_FDEVLSB_160000 0x3D +#define RF_FDEVMSB_170000 0x0A +#define RF_FDEVLSB_170000 0xE1 +#define RF_FDEVMSB_180000 0x0B +#define RF_FDEVLSB_180000 0x85 +#define RF_FDEVMSB_190000 0x0C +#define RF_FDEVLSB_190000 0x29 +#define RF_FDEVMSB_200000 0x0C +#define RF_FDEVLSB_200000 0xCD +#define RF_FDEVMSB_210000 0x0D +#define RF_FDEVLSB_210000 0x71 +#define RF_FDEVMSB_220000 0x0E +#define RF_FDEVLSB_220000 0x14 +#define RF_FDEVMSB_230000 0x0E +#define RF_FDEVLSB_230000 0xB8 +#define RF_FDEVMSB_240000 0x0F +#define RF_FDEVLSB_240000 0x5C +#define RF_FDEVMSB_250000 0x10 +#define RF_FDEVLSB_250000 0x00 +#define RF_FDEVMSB_260000 0x10 +#define RF_FDEVLSB_260000 0xA4 +#define RF_FDEVMSB_270000 0x11 +#define RF_FDEVLSB_270000 0x48 +#define RF_FDEVMSB_280000 0x11 +#define RF_FDEVLSB_280000 0xEC +#define RF_FDEVMSB_290000 0x12 +#define RF_FDEVLSB_290000 0x8F +#define RF_FDEVMSB_300000 0x13 +#define RF_FDEVLSB_300000 0x33 + + +// RegFrf (MHz) - carrier frequency +// 315Mhz band +#define RF_FRFMSB_314 0x4E +#define RF_FRFMID_314 0x80 +#define RF_FRFLSB_314 0x00 +#define RF_FRFMSB_315 0x4E +#define RF_FRFMID_315 0xC0 +#define RF_FRFLSB_315 0x00 +#define RF_FRFMSB_316 0x4F +#define RF_FRFMID_316 0x00 +#define RF_FRFLSB_316 0x00 +// 433mhz band +#define RF_FRFMSB_433 0x6C +#define RF_FRFMID_433 0x40 +#define RF_FRFLSB_433 0x00 +#define RF_FRFMSB_434 0x6C +#define RF_FRFMID_434 0x80 +#define RF_FRFLSB_434 0x00 +#define RF_FRFMSB_435 0x6C +#define RF_FRFMID_435 0xC0 +#define RF_FRFLSB_435 0x00 +// 868Mhz band +#define RF_FRFMSB_863 0xD7 +#define RF_FRFMID_863 0xC0 +#define RF_FRFLSB_863 0x00 +#define RF_FRFMSB_864 0xD8 +#define RF_FRFMID_864 0x00 +#define RF_FRFLSB_864 0x00 +#define RF_FRFMSB_865 0xD8 +#define RF_FRFMID_865 0x40 +#define RF_FRFLSB_865 0x00 +#define RF_FRFMSB_866 0xD8 +#define RF_FRFMID_866 0x80 +#define RF_FRFLSB_866 0x00 +#define RF_FRFMSB_867 0xD8 +#define RF_FRFMID_867 0xC0 +#define RF_FRFLSB_867 0x00 +#define RF_FRFMSB_868 0xD9 +#define RF_FRFMID_868 0x00 +#define RF_FRFLSB_868 0x00 +#define RF_FRFMSB_869 0xD9 +#define RF_FRFMID_869 0x40 +#define RF_FRFLSB_869 0x00 +#define RF_FRFMSB_870 0xD9 +#define RF_FRFMID_870 0x80 +#define RF_FRFLSB_870 0x00 +// 915Mhz band +#define RF_FRFMSB_902 0xE1 +#define RF_FRFMID_902 0x80 +#define RF_FRFLSB_902 0x00 +#define RF_FRFMSB_903 0xE1 +#define RF_FRFMID_903 0xC0 +#define RF_FRFLSB_903 0x00 +#define RF_FRFMSB_904 0xE2 +#define RF_FRFMID_904 0x00 +#define RF_FRFLSB_904 0x00 +#define RF_FRFMSB_905 0xE2 +#define RF_FRFMID_905 0x40 +#define RF_FRFLSB_905 0x00 +#define RF_FRFMSB_906 0xE2 +#define RF_FRFMID_906 0x80 +#define RF_FRFLSB_906 0x00 +#define RF_FRFMSB_907 0xE2 +#define RF_FRFMID_907 0xC0 +#define RF_FRFLSB_907 0x00 +#define RF_FRFMSB_908 0xE3 +#define RF_FRFMID_908 0x00 +#define RF_FRFLSB_908 0x00 +#define RF_FRFMSB_909 0xE3 +#define RF_FRFMID_909 0x40 +#define RF_FRFLSB_909 0x00 +#define RF_FRFMSB_910 0xE3 +#define RF_FRFMID_910 0x80 +#define RF_FRFLSB_910 0x00 +#define RF_FRFMSB_911 0xE3 +#define RF_FRFMID_911 0xC0 +#define RF_FRFLSB_911 0x00 +#define RF_FRFMSB_912 0xE4 +#define RF_FRFMID_912 0x00 +#define RF_FRFLSB_912 0x00 +#define RF_FRFMSB_913 0xE4 +#define RF_FRFMID_913 0x40 +#define RF_FRFLSB_913 0x00 +#define RF_FRFMSB_914 0xE4 +#define RF_FRFMID_914 0x80 +#define RF_FRFLSB_914 0x00 +#define RF_FRFMSB_915 0xE4 // Default +#define RF_FRFMID_915 0xC0 // Default +#define RF_FRFLSB_915 0x00 // Default +#define RF_FRFMSB_916 0xE5 +#define RF_FRFMID_916 0x00 +#define RF_FRFLSB_916 0x00 +#define RF_FRFMSB_917 0xE5 +#define RF_FRFMID_917 0x40 +#define RF_FRFLSB_917 0x00 +#define RF_FRFMSB_918 0xE5 +#define RF_FRFMID_918 0x80 +#define RF_FRFLSB_918 0x00 +#define RF_FRFMSB_919 0xE5 +#define RF_FRFMID_919 0xC0 +#define RF_FRFLSB_919 0x00 +#define RF_FRFMSB_920 0xE6 +#define RF_FRFMID_920 0x00 +#define RF_FRFLSB_920 0x00 +#define RF_FRFMSB_921 0xE6 +#define RF_FRFMID_921 0x40 +#define RF_FRFLSB_921 0x00 +#define RF_FRFMSB_922 0xE6 +#define RF_FRFMID_922 0x80 +#define RF_FRFLSB_922 0x00 +#define RF_FRFMSB_923 0xE6 +#define RF_FRFMID_923 0xC0 +#define RF_FRFLSB_923 0x00 +#define RF_FRFMSB_924 0xE7 +#define RF_FRFMID_924 0x00 +#define RF_FRFLSB_924 0x00 +#define RF_FRFMSB_925 0xE7 +#define RF_FRFMID_925 0x40 +#define RF_FRFLSB_925 0x00 +#define RF_FRFMSB_926 0xE7 +#define RF_FRFMID_926 0x80 +#define RF_FRFLSB_926 0x00 +#define RF_FRFMSB_927 0xE7 +#define RF_FRFMID_927 0xC0 +#define RF_FRFLSB_927 0x00 +#define RF_FRFMSB_928 0xE8 +#define RF_FRFMID_928 0x00 +#define RF_FRFLSB_928 0x00 + + +// RegOsc1 +#define RF_OSC1_RCCAL_START 0x80 +#define RF_OSC1_RCCAL_DONE 0x40 + + +// RegAfcCtrl +#define RF_AFCCTRL_LOWBETA_OFF 0x00 // Default +#define RF_AFCCTRL_LOWBETA_ON 0x20 + + +// RegLowBat +#define RF_LOWBAT_MONITOR 0x10 +#define RF_LOWBAT_ON 0x08 +#define RF_LOWBAT_OFF 0x00 // Default + +#define RF_LOWBAT_TRIM_1695 0x00 +#define RF_LOWBAT_TRIM_1764 0x01 +#define RF_LOWBAT_TRIM_1835 0x02 // Default +#define RF_LOWBAT_TRIM_1905 0x03 +#define RF_LOWBAT_TRIM_1976 0x04 +#define RF_LOWBAT_TRIM_2045 0x05 +#define RF_LOWBAT_TRIM_2116 0x06 +#define RF_LOWBAT_TRIM_2185 0x07 + + +// RegListen1 +#define RF_LISTEN1_RESOL_64 0x50 +#define RF_LISTEN1_RESOL_4100 0xA0 // Default +#define RF_LISTEN1_RESOL_262000 0xF0 + +#define RF_LISTEN1_RESOL_IDLE_64 0x40 +#define RF_LISTEN1_RESOL_IDLE_4100 0x80 // Default +#define RF_LISTEN1_RESOL_IDLE_262000 0xC0 + +#define RF_LISTEN1_RESOL_RX_64 0x10 +#define RF_LISTEN1_RESOL_RX_4100 0x20 // Default +#define RF_LISTEN1_RESOL_RX_262000 0x30 + +#define RF_LISTEN1_CRITERIA_RSSI 0x00 // Default +#define RF_LISTEN1_CRITERIA_RSSIANDSYNC 0x08 + +#define RF_LISTEN1_END_00 0x00 +#define RF_LISTEN1_END_01 0x02 // Default +#define RF_LISTEN1_END_10 0x04 + + +// RegListen2 +#define RF_LISTEN2_COEFIDLE_VALUE 0xF5 // Default + + +// RegListen3 +#define RF_LISTEN3_COEFRX_VALUE 0x20 // Default + + +// RegVersion +#define RF_VERSION_VER 0x24 // Default + + +// RegPaLevel +#define RF_PALEVEL_PA0_ON 0x80 // Default +#define RF_PALEVEL_PA0_OFF 0x00 +#define RF_PALEVEL_PA1_ON 0x40 +#define RF_PALEVEL_PA1_OFF 0x00 // Default +#define RF_PALEVEL_PA2_ON 0x20 +#define RF_PALEVEL_PA2_OFF 0x00 // Default + +#define RF_PALEVEL_OUTPUTPOWER_00000 0x00 +#define RF_PALEVEL_OUTPUTPOWER_00001 0x01 +#define RF_PALEVEL_OUTPUTPOWER_00010 0x02 +#define RF_PALEVEL_OUTPUTPOWER_00011 0x03 +#define RF_PALEVEL_OUTPUTPOWER_00100 0x04 +#define RF_PALEVEL_OUTPUTPOWER_00101 0x05 +#define RF_PALEVEL_OUTPUTPOWER_00110 0x06 +#define RF_PALEVEL_OUTPUTPOWER_00111 0x07 +#define RF_PALEVEL_OUTPUTPOWER_01000 0x08 +#define RF_PALEVEL_OUTPUTPOWER_01001 0x09 +#define RF_PALEVEL_OUTPUTPOWER_01010 0x0A +#define RF_PALEVEL_OUTPUTPOWER_01011 0x0B +#define RF_PALEVEL_OUTPUTPOWER_01100 0x0C +#define RF_PALEVEL_OUTPUTPOWER_01101 0x0D +#define RF_PALEVEL_OUTPUTPOWER_01110 0x0E +#define RF_PALEVEL_OUTPUTPOWER_01111 0x0F +#define RF_PALEVEL_OUTPUTPOWER_10000 0x10 +#define RF_PALEVEL_OUTPUTPOWER_10001 0x11 +#define RF_PALEVEL_OUTPUTPOWER_10010 0x12 +#define RF_PALEVEL_OUTPUTPOWER_10011 0x13 +#define RF_PALEVEL_OUTPUTPOWER_10100 0x14 +#define RF_PALEVEL_OUTPUTPOWER_10101 0x15 +#define RF_PALEVEL_OUTPUTPOWER_10110 0x16 +#define RF_PALEVEL_OUTPUTPOWER_10111 0x17 +#define RF_PALEVEL_OUTPUTPOWER_11000 0x18 +#define RF_PALEVEL_OUTPUTPOWER_11001 0x19 +#define RF_PALEVEL_OUTPUTPOWER_11010 0x1A +#define RF_PALEVEL_OUTPUTPOWER_11011 0x1B +#define RF_PALEVEL_OUTPUTPOWER_11100 0x1C +#define RF_PALEVEL_OUTPUTPOWER_11101 0x1D +#define RF_PALEVEL_OUTPUTPOWER_11110 0x1E +#define RF_PALEVEL_OUTPUTPOWER_11111 0x1F // Default + + +// RegPaRamp +#define RF_PARAMP_3400 0x00 +#define RF_PARAMP_2000 0x01 +#define RF_PARAMP_1000 0x02 +#define RF_PARAMP_500 0x03 +#define RF_PARAMP_250 0x04 +#define RF_PARAMP_125 0x05 +#define RF_PARAMP_100 0x06 +#define RF_PARAMP_62 0x07 +#define RF_PARAMP_50 0x08 +#define RF_PARAMP_40 0x09 // Default +#define RF_PARAMP_31 0x0A +#define RF_PARAMP_25 0x0B +#define RF_PARAMP_20 0x0C +#define RF_PARAMP_15 0x0D +#define RF_PARAMP_12 0x0E +#define RF_PARAMP_10 0x0F + + +// RegOcp +#define RF_OCP_OFF 0x0F +#define RF_OCP_ON 0x1A // Default + +#define RF_OCP_TRIM_45 0x00 +#define RF_OCP_TRIM_50 0x01 +#define RF_OCP_TRIM_55 0x02 +#define RF_OCP_TRIM_60 0x03 +#define RF_OCP_TRIM_65 0x04 +#define RF_OCP_TRIM_70 0x05 +#define RF_OCP_TRIM_75 0x06 +#define RF_OCP_TRIM_80 0x07 +#define RF_OCP_TRIM_85 0x08 +#define RF_OCP_TRIM_90 0x09 +#define RF_OCP_TRIM_95 0x0A // Default +#define RF_OCP_TRIM_100 0x0B +#define RF_OCP_TRIM_105 0x0C +#define RF_OCP_TRIM_110 0x0D +#define RF_OCP_TRIM_115 0x0E +#define RF_OCP_TRIM_120 0x0F + + +// RegAgcRef - not present on RFM69/SX1231 +#define RF_AGCREF_AUTO_ON 0x40 // Default +#define RF_AGCREF_AUTO_OFF 0x00 + +#define RF_AGCREF_LEVEL_MINUS80 0x00 // Default +#define RF_AGCREF_LEVEL_MINUS81 0x01 +#define RF_AGCREF_LEVEL_MINUS82 0x02 +#define RF_AGCREF_LEVEL_MINUS83 0x03 +#define RF_AGCREF_LEVEL_MINUS84 0x04 +#define RF_AGCREF_LEVEL_MINUS85 0x05 +#define RF_AGCREF_LEVEL_MINUS86 0x06 +#define RF_AGCREF_LEVEL_MINUS87 0x07 +#define RF_AGCREF_LEVEL_MINUS88 0x08 +#define RF_AGCREF_LEVEL_MINUS89 0x09 +#define RF_AGCREF_LEVEL_MINUS90 0x0A +#define RF_AGCREF_LEVEL_MINUS91 0x0B +#define RF_AGCREF_LEVEL_MINUS92 0x0C +#define RF_AGCREF_LEVEL_MINUS93 0x0D +#define RF_AGCREF_LEVEL_MINUS94 0x0E +#define RF_AGCREF_LEVEL_MINUS95 0x0F +#define RF_AGCREF_LEVEL_MINUS96 0x10 +#define RF_AGCREF_LEVEL_MINUS97 0x11 +#define RF_AGCREF_LEVEL_MINUS98 0x12 +#define RF_AGCREF_LEVEL_MINUS99 0x13 +#define RF_AGCREF_LEVEL_MINUS100 0x14 +#define RF_AGCREF_LEVEL_MINUS101 0x15 +#define RF_AGCREF_LEVEL_MINUS102 0x16 +#define RF_AGCREF_LEVEL_MINUS103 0x17 +#define RF_AGCREF_LEVEL_MINUS104 0x18 +#define RF_AGCREF_LEVEL_MINUS105 0x19 +#define RF_AGCREF_LEVEL_MINUS106 0x1A +#define RF_AGCREF_LEVEL_MINUS107 0x1B +#define RF_AGCREF_LEVEL_MINUS108 0x1C +#define RF_AGCREF_LEVEL_MINUS109 0x1D +#define RF_AGCREF_LEVEL_MINUS110 0x1E +#define RF_AGCREF_LEVEL_MINUS111 0x1F +#define RF_AGCREF_LEVEL_MINUS112 0x20 +#define RF_AGCREF_LEVEL_MINUS113 0x21 +#define RF_AGCREF_LEVEL_MINUS114 0x22 +#define RF_AGCREF_LEVEL_MINUS115 0x23 +#define RF_AGCREF_LEVEL_MINUS116 0x24 +#define RF_AGCREF_LEVEL_MINUS117 0x25 +#define RF_AGCREF_LEVEL_MINUS118 0x26 +#define RF_AGCREF_LEVEL_MINUS119 0x27 +#define RF_AGCREF_LEVEL_MINUS120 0x28 +#define RF_AGCREF_LEVEL_MINUS121 0x29 +#define RF_AGCREF_LEVEL_MINUS122 0x2A +#define RF_AGCREF_LEVEL_MINUS123 0x2B +#define RF_AGCREF_LEVEL_MINUS124 0x2C +#define RF_AGCREF_LEVEL_MINUS125 0x2D +#define RF_AGCREF_LEVEL_MINUS126 0x2E +#define RF_AGCREF_LEVEL_MINUS127 0x2F +#define RF_AGCREF_LEVEL_MINUS128 0x30 +#define RF_AGCREF_LEVEL_MINUS129 0x31 +#define RF_AGCREF_LEVEL_MINUS130 0x32 +#define RF_AGCREF_LEVEL_MINUS131 0x33 +#define RF_AGCREF_LEVEL_MINUS132 0x34 +#define RF_AGCREF_LEVEL_MINUS133 0x35 +#define RF_AGCREF_LEVEL_MINUS134 0x36 +#define RF_AGCREF_LEVEL_MINUS135 0x37 +#define RF_AGCREF_LEVEL_MINUS136 0x38 +#define RF_AGCREF_LEVEL_MINUS137 0x39 +#define RF_AGCREF_LEVEL_MINUS138 0x3A +#define RF_AGCREF_LEVEL_MINUS139 0x3B +#define RF_AGCREF_LEVEL_MINUS140 0x3C +#define RF_AGCREF_LEVEL_MINUS141 0x3D +#define RF_AGCREF_LEVEL_MINUS142 0x3E +#define RF_AGCREF_LEVEL_MINUS143 0x3F + + +// RegAgcThresh1 - not present on RFM69/SX1231 +#define RF_AGCTHRESH1_SNRMARGIN_000 0x00 +#define RF_AGCTHRESH1_SNRMARGIN_001 0x20 +#define RF_AGCTHRESH1_SNRMARGIN_010 0x40 +#define RF_AGCTHRESH1_SNRMARGIN_011 0x60 +#define RF_AGCTHRESH1_SNRMARGIN_100 0x80 +#define RF_AGCTHRESH1_SNRMARGIN_101 0xA0 // Default +#define RF_AGCTHRESH1_SNRMARGIN_110 0xC0 +#define RF_AGCTHRESH1_SNRMARGIN_111 0xE0 + +#define RF_AGCTHRESH1_STEP1_0 0x00 +#define RF_AGCTHRESH1_STEP1_1 0x01 +#define RF_AGCTHRESH1_STEP1_2 0x02 +#define RF_AGCTHRESH1_STEP1_3 0x03 +#define RF_AGCTHRESH1_STEP1_4 0x04 +#define RF_AGCTHRESH1_STEP1_5 0x05 +#define RF_AGCTHRESH1_STEP1_6 0x06 +#define RF_AGCTHRESH1_STEP1_7 0x07 +#define RF_AGCTHRESH1_STEP1_8 0x08 +#define RF_AGCTHRESH1_STEP1_9 0x09 +#define RF_AGCTHRESH1_STEP1_10 0x0A +#define RF_AGCTHRESH1_STEP1_11 0x0B +#define RF_AGCTHRESH1_STEP1_12 0x0C +#define RF_AGCTHRESH1_STEP1_13 0x0D +#define RF_AGCTHRESH1_STEP1_14 0x0E +#define RF_AGCTHRESH1_STEP1_15 0x0F +#define RF_AGCTHRESH1_STEP1_16 0x10 // Default +#define RF_AGCTHRESH1_STEP1_17 0x11 +#define RF_AGCTHRESH1_STEP1_18 0x12 +#define RF_AGCTHRESH1_STEP1_19 0x13 +#define RF_AGCTHRESH1_STEP1_20 0x14 +#define RF_AGCTHRESH1_STEP1_21 0x15 +#define RF_AGCTHRESH1_STEP1_22 0x16 +#define RF_AGCTHRESH1_STEP1_23 0x17 +#define RF_AGCTHRESH1_STEP1_24 0x18 +#define RF_AGCTHRESH1_STEP1_25 0x19 +#define RF_AGCTHRESH1_STEP1_26 0x1A +#define RF_AGCTHRESH1_STEP1_27 0x1B +#define RF_AGCTHRESH1_STEP1_28 0x1C +#define RF_AGCTHRESH1_STEP1_29 0x1D +#define RF_AGCTHRESH1_STEP1_30 0x1E +#define RF_AGCTHRESH1_STEP1_31 0x1F + + +// RegAgcThresh2 - not present on RFM69/SX1231 +#define RF_AGCTHRESH2_STEP2_0 0x00 +#define RF_AGCTHRESH2_STEP2_1 0x10 +#define RF_AGCTHRESH2_STEP2_2 0x20 +#define RF_AGCTHRESH2_STEP2_3 0x30 // XXX wrong -- Default +#define RF_AGCTHRESH2_STEP2_4 0x40 +#define RF_AGCTHRESH2_STEP2_5 0x50 +#define RF_AGCTHRESH2_STEP2_6 0x60 +#define RF_AGCTHRESH2_STEP2_7 0x70 // default +#define RF_AGCTHRESH2_STEP2_8 0x80 +#define RF_AGCTHRESH2_STEP2_9 0x90 +#define RF_AGCTHRESH2_STEP2_10 0xA0 +#define RF_AGCTHRESH2_STEP2_11 0xB0 +#define RF_AGCTHRESH2_STEP2_12 0xC0 +#define RF_AGCTHRESH2_STEP2_13 0xD0 +#define RF_AGCTHRESH2_STEP2_14 0xE0 +#define RF_AGCTHRESH2_STEP2_15 0xF0 + +#define RF_AGCTHRESH2_STEP3_0 0x00 +#define RF_AGCTHRESH2_STEP3_1 0x01 +#define RF_AGCTHRESH2_STEP3_2 0x02 +#define RF_AGCTHRESH2_STEP3_3 0x03 +#define RF_AGCTHRESH2_STEP3_4 0x04 +#define RF_AGCTHRESH2_STEP3_5 0x05 +#define RF_AGCTHRESH2_STEP3_6 0x06 +#define RF_AGCTHRESH2_STEP3_7 0x07 +#define RF_AGCTHRESH2_STEP3_8 0x08 +#define RF_AGCTHRESH2_STEP3_9 0x09 +#define RF_AGCTHRESH2_STEP3_10 0x0A +#define RF_AGCTHRESH2_STEP3_11 0x0B // Default +#define RF_AGCTHRESH2_STEP3_12 0x0C +#define RF_AGCTHRESH2_STEP3_13 0x0D +#define RF_AGCTHRESH2_STEP3_14 0x0E +#define RF_AGCTHRESH2_STEP3_15 0x0F + + +// RegAgcThresh3 - not present on RFM69/SX1231 +#define RF_AGCTHRESH3_STEP4_0 0x00 +#define RF_AGCTHRESH3_STEP4_1 0x10 +#define RF_AGCTHRESH3_STEP4_2 0x20 +#define RF_AGCTHRESH3_STEP4_3 0x30 +#define RF_AGCTHRESH3_STEP4_4 0x40 +#define RF_AGCTHRESH3_STEP4_5 0x50 +#define RF_AGCTHRESH3_STEP4_6 0x60 +#define RF_AGCTHRESH3_STEP4_7 0x70 +#define RF_AGCTHRESH3_STEP4_8 0x80 +#define RF_AGCTHRESH3_STEP4_9 0x90 // Default +#define RF_AGCTHRESH3_STEP4_10 0xA0 +#define RF_AGCTHRESH3_STEP4_11 0xB0 +#define RF_AGCTHRESH3_STEP4_12 0xC0 +#define RF_AGCTHRESH3_STEP4_13 0xD0 +#define RF_AGCTHRESH3_STEP4_14 0xE0 +#define RF_AGCTHRESH3_STEP4_15 0xF0 + +#define RF_AGCTHRESH3_STEP5_0 0x00 +#define RF_AGCTHRESH3_STEP5_1 0x01 +#define RF_AGCTHRESH3_STEP5_2 0x02 +#define RF_AGCTHRESH3_STEP5_3 0x03 +#define RF_AGCTHRESH3_STEP5_4 0x04 +#define RF_AGCTHRESH3_STEP5_5 0x05 +#define RF_AGCTHRESH3_STEP5_6 0x06 +#define RF_AGCTHRESH3_STEP5_7 0x07 +#define RF_AGCTHRES33_STEP5_8 0x08 +#define RF_AGCTHRESH3_STEP5_9 0x09 +#define RF_AGCTHRESH3_STEP5_10 0x0A +#define RF_AGCTHRESH3_STEP5_11 0x0B // Default +#define RF_AGCTHRESH3_STEP5_12 0x0C +#define RF_AGCTHRESH3_STEP5_13 0x0D +#define RF_AGCTHRESH3_STEP5_14 0x0E +#define RF_AGCTHRESH3_STEP5_15 0x0F + + +// RegLna +#define RF_LNA_ZIN_50 0x00 // Reset value +#define RF_LNA_ZIN_200 0x80 // Recommended default + +#define RF_LNA_LOWPOWER_OFF 0x00 // Default +#define RF_LNA_LOWPOWER_ON 0x40 + +#define RF_LNA_CURRENTGAIN 0x08 + +#define RF_LNA_GAINSELECT_AUTO 0x00 // Default +#define RF_LNA_GAINSELECT_MAX 0x01 +#define RF_LNA_GAINSELECT_MAXMINUS6 0x02 +#define RF_LNA_GAINSELECT_MAXMINUS12 0x03 +#define RF_LNA_GAINSELECT_MAXMINUS24 0x04 +#define RF_LNA_GAINSELECT_MAXMINUS36 0x05 +#define RF_LNA_GAINSELECT_MAXMINUS48 0x06 + + +// RegRxBw +#define RF_RXBW_DCCFREQ_000 0x00 +#define RF_RXBW_DCCFREQ_001 0x20 +#define RF_RXBW_DCCFREQ_010 0x40 // Recommended default +#define RF_RXBW_DCCFREQ_011 0x60 +#define RF_RXBW_DCCFREQ_100 0x80 // Reset value +#define RF_RXBW_DCCFREQ_101 0xA0 +#define RF_RXBW_DCCFREQ_110 0xC0 +#define RF_RXBW_DCCFREQ_111 0xE0 + +#define RF_RXBW_MANT_16 0x00 // Reset value +#define RF_RXBW_MANT_20 0x08 +#define RF_RXBW_MANT_24 0x10 // Recommended default + +#define RF_RXBW_EXP_0 0x00 +#define RF_RXBW_EXP_1 0x01 +#define RF_RXBW_EXP_2 0x02 +#define RF_RXBW_EXP_3 0x03 +#define RF_RXBW_EXP_4 0x04 +#define RF_RXBW_EXP_5 0x05 // Recommended default +#define RF_RXBW_EXP_6 0x06 // Reset value +#define RF_RXBW_EXP_7 0x07 + + +// RegAfcBw +#define RF_AFCBW_DCCFREQAFC_000 0x00 +#define RF_AFCBW_DCCFREQAFC_001 0x20 +#define RF_AFCBW_DCCFREQAFC_010 0x40 +#define RF_AFCBW_DCCFREQAFC_011 0x60 +#define RF_AFCBW_DCCFREQAFC_100 0x80 // Default +#define RF_AFCBW_DCCFREQAFC_101 0xA0 +#define RF_AFCBW_DCCFREQAFC_110 0xC0 +#define RF_AFCBW_DCCFREQAFC_111 0xE0 + +#define RF_AFCBW_MANTAFC_16 0x00 +#define RF_AFCBW_MANTAFC_20 0x08 // Default +#define RF_AFCBW_MANTAFC_24 0x10 + +#define RF_AFCBW_EXPAFC_0 0x00 +#define RF_AFCBW_EXPAFC_1 0x01 +#define RF_AFCBW_EXPAFC_2 0x02 // Reset value +#define RF_AFCBW_EXPAFC_3 0x03 // Recommended default +#define RF_AFCBW_EXPAFC_4 0x04 +#define RF_AFCBW_EXPAFC_5 0x05 +#define RF_AFCBW_EXPAFC_6 0x06 +#define RF_AFCBW_EXPAFC_7 0x07 + + +// RegOokPeak +#define RF_OOKPEAK_THRESHTYPE_FIXED 0x00 +#define RF_OOKPEAK_THRESHTYPE_PEAK 0x40 // Default +#define RF_OOKPEAK_THRESHTYPE_AVERAGE 0x80 + +#define RF_OOKPEAK_PEAKTHRESHSTEP_000 0x00 // Default +#define RF_OOKPEAK_PEAKTHRESHSTEP_001 0x08 +#define RF_OOKPEAK_PEAKTHRESHSTEP_010 0x10 +#define RF_OOKPEAK_PEAKTHRESHSTEP_011 0x18 +#define RF_OOKPEAK_PEAKTHRESHSTEP_100 0x20 +#define RF_OOKPEAK_PEAKTHRESHSTEP_101 0x28 +#define RF_OOKPEAK_PEAKTHRESHSTEP_110 0x30 +#define RF_OOKPEAK_PEAKTHRESHSTEP_111 0x38 + +#define RF_OOKPEAK_PEAKTHRESHDEC_000 0x00 // Default +#define RF_OOKPEAK_PEAKTHRESHDEC_001 0x01 +#define RF_OOKPEAK_PEAKTHRESHDEC_010 0x02 +#define RF_OOKPEAK_PEAKTHRESHDEC_011 0x03 +#define RF_OOKPEAK_PEAKTHRESHDEC_100 0x04 +#define RF_OOKPEAK_PEAKTHRESHDEC_101 0x05 +#define RF_OOKPEAK_PEAKTHRESHDEC_110 0x06 +#define RF_OOKPEAK_PEAKTHRESHDEC_111 0x07 + + +// RegOokAvg +#define RF_OOKAVG_AVERAGETHRESHFILT_00 0x00 +#define RF_OOKAVG_AVERAGETHRESHFILT_01 0x40 +#define RF_OOKAVG_AVERAGETHRESHFILT_10 0x80 // Default +#define RF_OOKAVG_AVERAGETHRESHFILT_11 0xC0 + + +// RegOokFix +#define RF_OOKFIX_FIXEDTHRESH_VALUE 0x06 // Default + + +// RegAfcFei +#define RF_AFCFEI_FEI_DONE 0x40 +#define RF_AFCFEI_FEI_START 0x20 +#define RF_AFCFEI_AFC_DONE 0x10 +#define RF_AFCFEI_AFCAUTOCLEAR_ON 0x08 +#define RF_AFCFEI_AFCAUTOCLEAR_OFF 0x00 // Default + +#define RF_AFCFEI_AFCAUTO_ON 0x04 +#define RF_AFCFEI_AFCAUTO_OFF 0x00 // Default + +#define RF_AFCFEI_AFC_CLEAR 0x02 +#define RF_AFCFEI_AFC_START 0x01 + + +// RegRssiConfig +#define RF_RSSI_FASTRX_ON 0x08 // not present on RFM69/SX1231 +#define RF_RSSI_FASTRX_OFF 0x00 // Default + +#define RF_RSSI_DONE 0x02 +#define RF_RSSI_START 0x01 + + +// RegDioMapping1 +#define RF_DIOMAPPING1_DIO0_00 0x00 // Default +#define RF_DIOMAPPING1_DIO0_01 0x40 +#define RF_DIOMAPPING1_DIO0_10 0x80 +#define RF_DIOMAPPING1_DIO0_11 0xC0 + +#define RF_DIOMAPPING1_DIO1_00 0x00 // Default +#define RF_DIOMAPPING1_DIO1_01 0x10 +#define RF_DIOMAPPING1_DIO1_10 0x20 +#define RF_DIOMAPPING1_DIO1_11 0x30 + +#define RF_DIOMAPPING1_DIO2_00 0x00 // Default +#define RF_DIOMAPPING1_DIO2_01 0x04 +#define RF_DIOMAPPING1_DIO2_10 0x08 +#define RF_DIOMAPPING1_DIO2_11 0x0C + +#define RF_DIOMAPPING1_DIO3_00 0x00 // Default +#define RF_DIOMAPPING1_DIO3_01 0x01 +#define RF_DIOMAPPING1_DIO3_10 0x02 +#define RF_DIOMAPPING1_DIO3_11 0x03 + + +// RegDioMapping2 +#define RF_DIOMAPPING2_DIO4_00 0x00 // Default +#define RF_DIOMAPPING2_DIO4_01 0x40 +#define RF_DIOMAPPING2_DIO4_10 0x80 +#define RF_DIOMAPPING2_DIO4_11 0xC0 + +#define RF_DIOMAPPING2_DIO5_00 0x00 // Default +#define RF_DIOMAPPING2_DIO5_01 0x10 +#define RF_DIOMAPPING2_DIO5_10 0x20 +#define RF_DIOMAPPING2_DIO5_11 0x30 + +#define RF_DIOMAPPING2_CLKOUT_32 0x00 +#define RF_DIOMAPPING2_CLKOUT_16 0x01 +#define RF_DIOMAPPING2_CLKOUT_8 0x02 +#define RF_DIOMAPPING2_CLKOUT_4 0x03 +#define RF_DIOMAPPING2_CLKOUT_2 0x04 +#define RF_DIOMAPPING2_CLKOUT_1 0x05 // Reset value +#define RF_DIOMAPPING2_CLKOUT_RC 0x06 +#define RF_DIOMAPPING2_CLKOUT_OFF 0x07 // Recommended default + + +// RegIrqFlags1 +#define RF_IRQFLAGS1_MODEREADY 0x80 +#define RF_IRQFLAGS1_RXREADY 0x40 +#define RF_IRQFLAGS1_TXREADY 0x20 +#define RF_IRQFLAGS1_PLLLOCK 0x10 +#define RF_IRQFLAGS1_RSSI 0x08 +#define RF_IRQFLAGS1_TIMEOUT 0x04 +#define RF_IRQFLAGS1_AUTOMODE 0x02 +#define RF_IRQFLAGS1_SYNCADDRESSMATCH 0x01 + + +// RegIrqFlags2 +#define RF_IRQFLAGS2_FIFOFULL 0x80 +#define RF_IRQFLAGS2_FIFONOTEMPTY 0x40 +#define RF_IRQFLAGS2_FIFOLEVEL 0x20 +#define RF_IRQFLAGS2_FIFOOVERRUN 0x10 +#define RF_IRQFLAGS2_PACKETSENT 0x08 +#define RF_IRQFLAGS2_PAYLOADREADY 0x04 +#define RF_IRQFLAGS2_CRCOK 0x02 +#define RF_IRQFLAGS2_LOWBAT 0x01 // not present on RFM69/SX1231 + + +// RegRssiThresh +#define RF_RSSITHRESH_VALUE 0xE4 // Default + + +// RegRxTimeout1 +#define RF_RXTIMEOUT1_RXSTART_VALUE 0x00 // Default + + +// RegRxTimeout2 +#define RF_RXTIMEOUT2_RSSITHRESH_VALUE 0x00 // Default + + +// RegPreamble +#define RF_PREAMBLESIZE_MSB_VALUE 0x00 // Default +#define RF_PREAMBLESIZE_LSB_VALUE 0x03 // Default + + +// RegSyncConfig +#define RF_SYNC_ON 0x80 // Default +#define RF_SYNC_OFF 0x00 + +#define RF_SYNC_FIFOFILL_AUTO 0x00 // Default -- when sync interrupt occurs +#define RF_SYNC_FIFOFILL_MANUAL 0x40 + +#define RF_SYNC_SIZE_1 0x00 +#define RF_SYNC_SIZE_2 0x08 +#define RF_SYNC_SIZE_3 0x10 +#define RF_SYNC_SIZE_4 0x18 // Default +#define RF_SYNC_SIZE_5 0x20 +#define RF_SYNC_SIZE_6 0x28 +#define RF_SYNC_SIZE_7 0x30 +#define RF_SYNC_SIZE_8 0x38 + +#define RF_SYNC_TOL_0 0x00 // Default +#define RF_SYNC_TOL_1 0x01 +#define RF_SYNC_TOL_2 0x02 +#define RF_SYNC_TOL_3 0x03 +#define RF_SYNC_TOL_4 0x04 +#define RF_SYNC_TOL_5 0x05 +#define RF_SYNC_TOL_6 0x06 +#define RF_SYNC_TOL_7 0x07 + + +// RegSyncValue1-8 +#define RF_SYNC_BYTE1_VALUE 0x00 // Default +#define RF_SYNC_BYTE2_VALUE 0x00 // Default +#define RF_SYNC_BYTE3_VALUE 0x00 // Default +#define RF_SYNC_BYTE4_VALUE 0x00 // Default +#define RF_SYNC_BYTE5_VALUE 0x00 // Default +#define RF_SYNC_BYTE6_VALUE 0x00 // Default +#define RF_SYNC_BYTE7_VALUE 0x00 // Default +#define RF_SYNC_BYTE8_VALUE 0x00 // Default + + +// RegPacketConfig1 +#define RF_PACKET1_FORMAT_FIXED 0x00 // Default +#define RF_PACKET1_FORMAT_VARIABLE 0x80 + +#define RF_PACKET1_DCFREE_OFF 0x00 // Default +#define RF_PACKET1_DCFREE_MANCHESTER 0x20 +#define RF_PACKET1_DCFREE_WHITENING 0x40 + +#define RF_PACKET1_CRC_ON 0x10 // Default +#define RF_PACKET1_CRC_OFF 0x00 + +#define RF_PACKET1_CRCAUTOCLEAR_ON 0x00 // Default +#define RF_PACKET1_CRCAUTOCLEAR_OFF 0x08 + +#define RF_PACKET1_ADRSFILTERING_OFF 0x00 // Default +#define RF_PACKET1_ADRSFILTERING_NODE 0x02 +#define RF_PACKET1_ADRSFILTERING_NODEBROADCAST 0x04 + + +// RegPayloadLength +#define RF_PAYLOADLENGTH_VALUE 0x40 // Default + + +// RegBroadcastAdrs +#define RF_BROADCASTADDRESS_VALUE 0x00 + + +// RegAutoModes +#define RF_AUTOMODES_ENTER_OFF 0x00 // Default +#define RF_AUTOMODES_ENTER_FIFONOTEMPTY 0x20 +#define RF_AUTOMODES_ENTER_FIFOLEVEL 0x40 +#define RF_AUTOMODES_ENTER_CRCOK 0x60 +#define RF_AUTOMODES_ENTER_PAYLOADREADY 0x80 +#define RF_AUTOMODES_ENTER_SYNCADRSMATCH 0xA0 +#define RF_AUTOMODES_ENTER_PACKETSENT 0xC0 +#define RF_AUTOMODES_ENTER_FIFOEMPTY 0xE0 + +#define RF_AUTOMODES_EXIT_OFF 0x00 // Default +#define RF_AUTOMODES_EXIT_FIFOEMPTY 0x04 +#define RF_AUTOMODES_EXIT_FIFOLEVEL 0x08 +#define RF_AUTOMODES_EXIT_CRCOK 0x0C +#define RF_AUTOMODES_EXIT_PAYLOADREADY 0x10 +#define RF_AUTOMODES_EXIT_SYNCADRSMATCH 0x14 +#define RF_AUTOMODES_EXIT_PACKETSENT 0x18 +#define RF_AUTOMODES_EXIT_RXTIMEOUT 0x1C + +#define RF_AUTOMODES_INTERMEDIATE_SLEEP 0x00 // Default +#define RF_AUTOMODES_INTERMEDIATE_STANDBY 0x01 +#define RF_AUTOMODES_INTERMEDIATE_RECEIVER 0x02 +#define RF_AUTOMODES_INTERMEDIATE_TRANSMITTER 0x03 + + +// RegFifoThresh +#define RF_FIFOTHRESH_TXSTART_FIFOTHRESH 0x00 // Reset value +#define RF_FIFOTHRESH_TXSTART_FIFONOTEMPTY 0x80 // Recommended default + +#define RF_FIFOTHRESH_VALUE 0x0F // Default + + +// RegPacketConfig2 +#define RF_PACKET2_RXRESTARTDELAY_1BIT 0x00 // Default +#define RF_PACKET2_RXRESTARTDELAY_2BITS 0x10 +#define RF_PACKET2_RXRESTARTDELAY_4BITS 0x20 +#define RF_PACKET2_RXRESTARTDELAY_8BITS 0x30 +#define RF_PACKET2_RXRESTARTDELAY_16BITS 0x40 +#define RF_PACKET2_RXRESTARTDELAY_32BITS 0x50 +#define RF_PACKET2_RXRESTARTDELAY_64BITS 0x60 +#define RF_PACKET2_RXRESTARTDELAY_128BITS 0x70 +#define RF_PACKET2_RXRESTARTDELAY_256BITS 0x80 +#define RF_PACKET2_RXRESTARTDELAY_512BITS 0x90 +#define RF_PACKET2_RXRESTARTDELAY_1024BITS 0xA0 +#define RF_PACKET2_RXRESTARTDELAY_2048BITS 0xB0 +#define RF_PACKET2_RXRESTARTDELAY_NONE 0xC0 +#define RF_PACKET2_RXRESTART 0x04 + +#define RF_PACKET2_AUTORXRESTART_ON 0x02 // Default +#define RF_PACKET2_AUTORXRESTART_OFF 0x00 + +#define RF_PACKET2_AES_ON 0x01 +#define RF_PACKET2_AES_OFF 0x00 // Default + + +// RegAesKey1-16 +#define RF_AESKEY1_VALUE 0x00 // Default +#define RF_AESKEY2_VALUE 0x00 // Default +#define RF_AESKEY3_VALUE 0x00 // Default +#define RF_AESKEY4_VALUE 0x00 // Default +#define RF_AESKEY5_VALUE 0x00 // Default +#define RF_AESKEY6_VALUE 0x00 // Default +#define RF_AESKEY7_VALUE 0x00 // Default +#define RF_AESKEY8_VALUE 0x00 // Default +#define RF_AESKEY9_VALUE 0x00 // Default +#define RF_AESKEY10_VALUE 0x00 // Default +#define RF_AESKEY11_VALUE 0x00 // Default +#define RF_AESKEY12_VALUE 0x00 // Default +#define RF_AESKEY13_VALUE 0x00 // Default +#define RF_AESKEY14_VALUE 0x00 // Default +#define RF_AESKEY15_VALUE 0x00 // Default +#define RF_AESKEY16_VALUE 0x00 // Default + + +// RegTemp1 +#define RF_TEMP1_MEAS_START 0x08 +#define RF_TEMP1_MEAS_RUNNING 0x04 +// not present on RFM69/SX1231 +#define RF_TEMP1_ADCLOWPOWER_ON 0x01 // Default +#define RF_TEMP1_ADCLOWPOWER_OFF 0x00 + + +// RegTestLna +#define RF_TESTLNA_NORMAL 0x1B +#define RF_TESTLNA_HIGH_SENSITIVITY 0x2D + + +// RegTestDagc +#define RF_DAGC_NORMAL 0x00 // Reset value +#define RF_DAGC_IMPROVED_LOWBETA1 0x20 +#define RF_DAGC_IMPROVED_LOWBETA0 0x30 // Recommended default \ No newline at end of file