Revision 1:b5922b3b3257, committed 2016-09-13

Comitter:

dotnfc

Date:

Tue Sep 13 06:17:35 2016 +0000

Parent:

0:db8030e71f55

Commit message:

Remove ununsed files.

Changed in this revision

--- a/LICENSE	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,21 +0,0 @@
-MIT License
-
-Copyright (c) 2016 dotnfc
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.

--- a/PN532/examples/android_hce/android_hce.ino	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,135 +0,0 @@
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include <PN532Interface.h>
-#include <PN532.h>
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-
-void setup()
-{    
-    Serial.begin(115200);
-    Serial.println("-------Peer to Peer HCE--------");
-    
-    nfc.begin();
-    
-    uint32_t versiondata = nfc.getFirmwareVersion();
-    if (! versiondata) {
-      Serial.print("Didn't find PN53x board");
-      while (1); // halt
-    }
-    
-    // Got ok data, print it out!
-    Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); 
-    Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); 
-    Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-    
-    // Set the max number of retry attempts to read from a card
-    // This prevents us from waiting forever for a card, which is
-    // the default behaviour of the PN532.
-    //nfc.setPassiveActivationRetries(0xFF);
-    
-    // configure board to read RFID tags
-    nfc.SAMConfig();
-}
-
-void loop()
-{
-  bool success;
-  
-  uint8_t responseLength = 32;
-  
-  Serial.println("Waiting for an ISO14443A card");
-  
-  // set shield to inListPassiveTarget
-  success = nfc.inListPassiveTarget();
-
-  if(success) {
-   
-     Serial.println("Found something!");
-                  
-    uint8_t selectApdu[] = { 0x00, /* CLA */
-                              0xA4, /* INS */
-                              0x04, /* P1  */
-                              0x00, /* P2  */
-                              0x07, /* Length of AID  */
-                              0xF0, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, /* AID defined on Android App */
-                              0x00  /* Le  */ };
-                              
-    uint8_t response[32];  
-     
-    success = nfc.inDataExchange(selectApdu, sizeof(selectApdu), response, &responseLength);
-    
-    if(success) {
-      
-      Serial.print("responseLength: "); Serial.println(responseLength);
-       
-      nfc.PrintHexChar(response, responseLength);
-      
-      do {
-        uint8_t apdu[] = "Hello from Arduino";
-        uint8_t back[32];
-        uint8_t length = 32; 
-
-        success = nfc.inDataExchange(apdu, sizeof(apdu), back, &length);
-        
-        if(success) {
-         
-          Serial.print("responseLength: "); Serial.println(length);
-           
-          nfc.PrintHexChar(back, length);
-        }
-        else {
-          
-          Serial.println("Broken connection?"); 
-        }
-      }
-      while(success);
-    }
-    else {
-     
-      Serial.println("Failed sending SELECT AID"); 
-    }
-  }
-  else {
-   
-    Serial.println("Didn't find anything!");
-  }
-
-  delay(1000);
-}
-
-void printResponse(uint8_t *response, uint8_t responseLength) {
-  
-   String respBuffer;
-
-    for (int i = 0; i < responseLength; i++) {
-      
-      if (response[i] < 0x10) 
-        respBuffer = respBuffer + "0"; //Adds leading zeros if hex value is smaller than 0x10
-      
-      respBuffer = respBuffer + String(response[i], HEX) + " ";                        
-    }
-
-    Serial.print("response: "); Serial.println(respBuffer);
-}
-
-void setupNFC() {
- 
-  nfc.begin();
-    
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-  
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); 
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); 
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-  
-  // configure board to read RFID tags
-  nfc.SAMConfig(); 
-}

--- a/PN532/examples/emulate_tag_ndef/emulate_tag_ndef.ino	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-
-#include "SPI.h"
-#include "PN532_SPI.h"
-#include "emulatetag.h"
-#include "NdefMessage.h"
-
-PN532_SPI pn532spi(SPI, 10);
-EmulateTag nfc(pn532spi);
-
-uint8_t ndefBuf[120];
-NdefMessage message;
-int messageSize;
-
-uint8_t uid[3] = { 0x12, 0x34, 0x56 };
-
-void setup()
-{
-  Serial.begin(115200);
-  Serial.println("------- Emulate Tag --------");
-  
-  message = NdefMessage();
-  message.addUriRecord("http://www.seeedstudio.com");
-  messageSize = message.getEncodedSize();
-  if (messageSize > sizeof(ndefBuf)) {
-      Serial.println("ndefBuf is too small");
-      while (1) { }
-  }
-  
-  Serial.print("Ndef encoded message size: ");
-  Serial.println(messageSize);
-
-  message.encode(ndefBuf);
-  
-  // comment out this command for no ndef message
-  nfc.setNdefFile(ndefBuf, messageSize);
-  
-  // uid must be 3 bytes!
-  nfc.setUid(uid);
-  
-  nfc.init();
-}
-
-void loop(){
-    // uncomment for overriding ndef in case a write to this tag occured
-    //nfc.setNdefFile(ndefBuf, messageSize); 
-    
-    // start emulation (blocks)
-    nfc.emulate();
-        
-    // or start emulation with timeout
-    /*if(!nfc.emulate(1000)){ // timeout 1 second
-      Serial.println("timed out");
-    }*/
-    
-    // deny writing to the tag
-    // nfc.setTagWriteable(false);
-    
-    if(nfc.writeOccured()){
-       Serial.println("\nWrite occured !");
-       uint8_t* tag_buf;
-       uint16_t length;
-       
-       nfc.getContent(&tag_buf, &length);
-       NdefMessage msg = NdefMessage(tag_buf, length);
-       msg.print();
-    }
-
-    delay(1000);
-}

--- a/PN532/examples/iso14443a_uid/iso14443a_uid.pde	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,78 +0,0 @@
-/**************************************************************************/
-/*! 
-    This example will attempt to connect to an ISO14443A
-    card or tag and retrieve some basic information about it
-    that can be used to determine what type of card it is.   
-   
-    Note that you need the baud rate to be 115200 because we need to print
-    out the data and read from the card at the same time!
-
-    To enable debug message, define DEBUG in PN532/PN532_debug.h
-    
-*/
-/**************************************************************************/
-
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include "PN532.h"
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-void setup(void) {
-  Serial.begin(115200);
-  Serial.println("Hello!");
-
-  nfc.begin();
-
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-  
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); 
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); 
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-  
-  // Set the max number of retry attempts to read from a card
-  // This prevents us from waiting forever for a card, which is
-  // the default behaviour of the PN532.
-  nfc.setPassiveActivationRetries(0xFF);
-  
-  // configure board to read RFID tags
-  nfc.SAMConfig();
-    
-  Serial.println("Waiting for an ISO14443A card");
-}
-
-void loop(void) {
-  boolean success;
-  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-  uint8_t uidLength;                        // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
-  
-  // Wait for an ISO14443A type cards (Mifare, etc.).  When one is found
-  // 'uid' will be populated with the UID, and uidLength will indicate
-  // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
-  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, &uid[0], &uidLength);
-  
-  if (success) {
-    Serial.println("Found a card!");
-    Serial.print("UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
-    Serial.print("UID Value: ");
-    for (uint8_t i=0; i < uidLength; i++) 
-    {
-      Serial.print(" 0x");Serial.print(uid[i], HEX); 
-    }
-    Serial.println("");
-    
-    // wait until the card is taken away
-    while (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, &uid[0], &uidLength)) {}
-  }
-  else
-  {
-    // PN532 probably timed out waiting for a card
-    Serial.println("Timed out waiting for a card");
-  }
-}

--- a/PN532/examples/mifareclassic_formatndef/mifareclassic_formatndef.pde	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,170 +0,0 @@
-/**************************************************************************/
-/*!
-    This example attempts to format a clean Mifare Classic 1K card as
-    an NFC Forum tag (to store NDEF messages that can be read by any
-    NFC enabled Android phone, etc.)
-
-    Note that you need the baud rate to be 115200 because we need to print
-    out the data and read from the card at the same time!
-
-    To enable debug message, define DEBUG in PN532/PN532_debug.h
-*/
-/**************************************************************************/
-
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include "PN532.h"
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-/*
-    We can encode many different kinds of pointers to the card,
-    from a URL, to an Email address, to a phone number, and many more
-    check the library header .h file to see the large # of supported
-    prefixes!
-*/
-// For a http://www. url:
-const char * url = "seeedstudio.com";
-uint8_t ndefprefix = NDEF_URIPREFIX_HTTP_WWWDOT;
-
-// for an email address
-//const char * url = "mail@example.com";
-//uint8_t ndefprefix = NDEF_URIPREFIX_MAILTO;
-
-// for a phone number
-//const char * url = "+1 212 555 1212";
-//uint8_t ndefprefix = NDEF_URIPREFIX_TEL;
-
-
-void setup(void) {
-  Serial.begin(115200);
-  Serial.println("Looking for PN532...");
-
-  nfc.begin();
-
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX);
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC);
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-
-  // configure board to read RFID tags
-  nfc.SAMConfig();
-}
-
-void loop(void) {
-  uint8_t success;                          // Flag to check if there was an error with the PN532
-  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-  uint8_t uidLength;                        // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
-  bool authenticated = false;               // Flag to indicate if the sector is authenticated
-
-  // Use the default key
-  uint8_t keya[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-
-  Serial.println("");
-  Serial.println("PLEASE NOTE: Formatting your card for NDEF records will change the");
-  Serial.println("authentication keys.  To reformat your NDEF tag as a clean Mifare");
-  Serial.println("Classic tag, use the mifareclassic_ndeftoclassic example!");
-  Serial.println("");
-  Serial.println("Place your Mifare Classic card on the reader to format with NDEF");
-  Serial.println("and press any key to continue ...");
-  // Wait for user input before proceeding
-  while (!Serial.available());
-  // a key was pressed1
-  while (Serial.available()) Serial.read();
-
-  // Wait for an ISO14443A type card (Mifare, etc.).  When one is found
-  // 'uid' will be populated with the UID, and uidLength will indicate
-  // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
-  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);
-
-  if (success)
-  {
-    // Display some basic information about the card
-    Serial.println("Found an ISO14443A card");
-    Serial.print("  UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
-    Serial.print("  UID Value: ");
-    nfc.PrintHex(uid, uidLength);
-    for (uint8_t i = 0; i < uidLength; i++) {
-      Serial.print(uid[i], HEX);
-      Serial.print(' ');
-    }
-    Serial.println("");
-
-    // Make sure this is a Mifare Classic card
-    if (uidLength != 4)
-    {
-      Serial.println("Ooops ... this doesn't seem to be a Mifare Classic card!");
-      return;
-    }
-
-    // We probably have a Mifare Classic card ...
-    Serial.println("Seems to be a Mifare Classic card (4 byte UID)");
-
-    // Try to format the card for NDEF data
-    success = nfc.mifareclassic_AuthenticateBlock (uid, uidLength, 0, 0, keya);
-    if (!success)
-    {
-      Serial.println("Unable to authenticate block 0 to enable card formatting!");
-      return;
-    }
-    success = nfc.mifareclassic_FormatNDEF();
-    if (!success)
-    {
-      Serial.println("Unable to format the card for NDEF");
-      return;
-    }
-
-    Serial.println("Card has been formatted for NDEF data using MAD1");
-
-    // Try to authenticate block 4 (first block of sector 1) using our key
-    success = nfc.mifareclassic_AuthenticateBlock (uid, uidLength, 4, 0, keya);
-
-    // Make sure the authentification process didn't fail
-    if (!success)
-    {
-      Serial.println("Authentication failed.");
-      return;
-    }
-
-    // Try to write a URL
-    Serial.println("Writing URI to sector 1 as an NDEF Message");
-
-    // Authenticated seems to have worked
-    // Try to write an NDEF record to sector 1
-    // Use 0x01 for the URI Identifier Code to prepend "http://www."
-    // to the url (and save some space).  For information on URI ID Codes
-    // see http://www.ladyada.net/wiki/private/articlestaging/nfc/ndef
-    if (strlen(url) > 38)
-    {
-      // The length is also checked in the WriteNDEFURI function, but lets
-      // warn users here just in case they change the value and it's bigger
-      // than it should be
-      Serial.println("URI is too long ... must be less than 38 characters long");
-      return;
-    }
-
-    // URI is within size limits ... write it to the card and report success/failure
-    success = nfc.mifareclassic_WriteNDEFURI(1, ndefprefix, url);
-    if (success)
-    {
-      Serial.println("NDEF URI Record written to sector 1");
-    }
-    else
-    {
-      Serial.println("NDEF Record creation failed! :(");
-    }
-  }
-
-  // Wait a bit before trying again
-  Serial.println("\n\nDone!");
-  delay(1000);
-  Serial.flush();
-  while(Serial.available()) Serial.read();
-}
\ No newline at end of file

--- a/PN532/examples/mifareclassic_memdump/mifareclassic_memdump.pde	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,157 +0,0 @@
-/**************************************************************************/
-/*!
-    This example attempts to dump the contents of a Mifare Classic 1K card
-
-    Note that you need the baud rate to be 115200 because we need to print
-    out the data and read from the card at the same time!
-
-    To enable debug message, define DEBUG in PN532/PN532_debug.h
-*/
-/**************************************************************************/
-
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include "PN532.h"
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-void setup(void) {
-  // has to be fast to dump the entire memory contents!
-  Serial.begin(115200);
-  Serial.println("Looking for PN532...");
-
-  nfc.begin();
-
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX);
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC);
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-
-  // configure board to read RFID tags
-  nfc.SAMConfig();
-
-  Serial.println("Waiting for an ISO14443A Card ...");
-}
-
-
-void loop(void) {
-  uint8_t success;                          // Flag to check if there was an error with the PN532
-  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-  uint8_t uidLength;                        // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
-  uint8_t currentblock;                     // Counter to keep track of which block we're on
-  bool authenticated = false;               // Flag to indicate if the sector is authenticated
-  uint8_t data[16];                         // Array to store block data during reads
-
-  // Keyb on NDEF and Mifare Classic should be the same
-  uint8_t keyuniversal[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-
-  // Wait for an ISO14443A type cards (Mifare, etc.).  When one is found
-  // 'uid' will be populated with the UID, and uidLength will indicate
-  // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
-  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);
-
-  if (success) {
-    // Display some basic information about the card
-    Serial.println("Found an ISO14443A card");
-    Serial.print("  UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
-    Serial.print("  UID Value: ");
-    for (uint8_t i = 0; i < uidLength; i++) {
-      Serial.print(uid[i], HEX);
-      Serial.print(' ');
-    }
-    Serial.println("");
-
-    if (uidLength == 4)
-    {
-      // We probably have a Mifare Classic card ...
-      Serial.println("Seems to be a Mifare Classic card (4 byte UID)");
-
-      // Now we try to go through all 16 sectors (each having 4 blocks)
-      // authenticating each sector, and then dumping the blocks
-      for (currentblock = 0; currentblock < 64; currentblock++)
-      {
-        // Check if this is a new block so that we can reauthenticate
-        if (nfc.mifareclassic_IsFirstBlock(currentblock)) authenticated = false;
-
-        // If the sector hasn't been authenticated, do so first
-        if (!authenticated)
-        {
-          // Starting of a new sector ... try to to authenticate
-          Serial.print("------------------------Sector ");Serial.print(currentblock/4, DEC);Serial.println("-------------------------");
-          if (currentblock == 0)
-          {
-              // This will be 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF for Mifare Classic (non-NDEF!)
-              // or 0xA0 0xA1 0xA2 0xA3 0xA4 0xA5 for NDEF formatted cards using key a,
-              // but keyb should be the same for both (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF)
-              success = nfc.mifareclassic_AuthenticateBlock (uid, uidLength, currentblock, 1, keyuniversal);
-          }
-          else
-          {
-              // This will be 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF for Mifare Classic (non-NDEF!)
-              // or 0xD3 0xF7 0xD3 0xF7 0xD3 0xF7 for NDEF formatted cards using key a,
-              // but keyb should be the same for both (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF)
-              success = nfc.mifareclassic_AuthenticateBlock (uid, uidLength, currentblock, 1, keyuniversal);
-          }
-          if (success)
-          {
-            authenticated = true;
-          }
-          else
-          {
-            Serial.println("Authentication error");
-          }
-        }
-        // If we're still not authenticated just skip the block
-        if (!authenticated)
-        {
-          Serial.print("Block ");Serial.print(currentblock, DEC);Serial.println(" unable to authenticate");
-        }
-        else
-        {
-          // Authenticated ... we should be able to read the block now
-          // Dump the data into the 'data' array
-          success = nfc.mifareclassic_ReadDataBlock(currentblock, data);
-          if (success)
-          {
-            // Read successful
-            Serial.print("Block ");Serial.print(currentblock, DEC);
-            if (currentblock < 10)
-            {
-              Serial.print("  ");
-            }
-            else
-            {
-              Serial.print(" ");
-            }
-            // Dump the raw data
-            nfc.PrintHexChar(data, 16);
-          }
-          else
-          {
-            // Oops ... something happened
-            Serial.print("Block ");Serial.print(currentblock, DEC);
-            Serial.println(" unable to read this block");
-          }
-        }
-      }
-    }
-    else
-    {
-      Serial.println("Ooops ... this doesn't seem to be a Mifare Classic card!");
-    }
-  }
-  // Wait a bit before trying again
-  Serial.println("\n\nSend a character to run the mem dumper again!");
-  Serial.flush();
-  while (!Serial.available());
-  while (Serial.available()) {
-  Serial.read();
-  }
-  Serial.flush();
-}
\ No newline at end of file

--- a/PN532/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.pde	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,172 +0,0 @@
-/**************************************************************************/
-/*! 
-    This examples attempts to take a Mifare Classic 1K card that has been
-    formatted for NDEF messages using mifareclassic_formatndef, and resets
-    the authentication keys back to the Mifare Classic defaults
-
-    To enable debug message, define DEBUG in PN532/PN532_debug.h
-*/
-/**************************************************************************/
-
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include "PN532.h"
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-
-#define NR_SHORTSECTOR          (32)    // Number of short sectors on Mifare 1K/4K
-#define NR_LONGSECTOR           (8)     // Number of long sectors on Mifare 4K
-#define NR_BLOCK_OF_SHORTSECTOR (4)     // Number of blocks in a short sector
-#define NR_BLOCK_OF_LONGSECTOR  (16)    // Number of blocks in a long sector
-
-// Determine the sector trailer block based on sector number
-#define BLOCK_NUMBER_OF_SECTOR_TRAILER(sector) (((sector)<NR_SHORTSECTOR)? \
-  ((sector)*NR_BLOCK_OF_SHORTSECTOR + NR_BLOCK_OF_SHORTSECTOR-1):\
-  (NR_SHORTSECTOR*NR_BLOCK_OF_SHORTSECTOR + (sector-NR_SHORTSECTOR)*NR_BLOCK_OF_LONGSECTOR + NR_BLOCK_OF_LONGSECTOR-1))
-
-// Determine the sector's first block based on the sector number
-#define BLOCK_NUMBER_OF_SECTOR_1ST_BLOCK(sector) (((sector)<NR_SHORTSECTOR)? \
-  ((sector)*NR_BLOCK_OF_SHORTSECTOR):\
-  (NR_SHORTSECTOR*NR_BLOCK_OF_SHORTSECTOR + (sector-NR_SHORTSECTOR)*NR_BLOCK_OF_LONGSECTOR))
-
-// The default Mifare Classic key
-static const uint8_t KEY_DEFAULT_KEYAB[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
-
-void setup(void) {
-  Serial.begin(115200);
-  Serial.println("Looking for PN532...");
-
-  nfc.begin();
-
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-  
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); 
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); 
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-  
-  // configure board to read RFID tags
-  nfc.SAMConfig();
-}
-
-void loop(void) {
-  uint8_t success;                          // Flag to check if there was an error with the PN532
-  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-  uint8_t uidLength;                        // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
-  bool authenticated = false;               // Flag to indicate if the sector is authenticated
-  uint8_t blockBuffer[16];                  // Buffer to store block contents
-  uint8_t blankAccessBits[3] = { 0xff, 0x07, 0x80 };
-  uint8_t idx = 0;
-  uint8_t numOfSector = 16;                 // Assume Mifare Classic 1K for now (16 4-block sectors)
-  
-  Serial.println("Place your NDEF formatted Mifare Classic 1K card on the reader");
-  Serial.println("and press any key to continue ...");
-  
-  // Wait for user input before proceeding
-  while (!Serial.available());
-  while (Serial.available()) Serial.read();
-    
-  // Wait for an ISO14443A type card (Mifare, etc.).  When one is found
-  // 'uid' will be populated with the UID, and uidLength will indicate
-  // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
-  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);
-
-  if (success) 
-  {
-    // We seem to have a tag ...
-    // Display some basic information about it
-    Serial.println("Found an ISO14443A card/tag");
-    Serial.print("  UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
-    Serial.print("  UID Value: ");
-    nfc.PrintHex(uid, uidLength);
-    Serial.println("");
-    
-    // Make sure this is a Mifare Classic card
-    if (uidLength != 4)
-    {
-      Serial.println("Ooops ... this doesn't seem to be a Mifare Classic card!"); 
-      return;
-    }    
-    
-    Serial.println("Seems to be a Mifare Classic card (4 byte UID)");
-    Serial.println("");
-    Serial.println("Reformatting card for Mifare Classic (please don't touch it!) ... ");
-
-    // Now run through the card sector by sector
-    for (idx = 0; idx < numOfSector; idx++)
-    {
-      // Step 1: Authenticate the current sector using key B 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
-      success = nfc.mifareclassic_AuthenticateBlock (uid, uidLength, BLOCK_NUMBER_OF_SECTOR_TRAILER(idx), 1, (uint8_t *)KEY_DEFAULT_KEYAB);
-      if (!success)
-      {
-        Serial.print("Authentication failed for sector "); Serial.println(numOfSector);
-        return;
-      }
-      
-      // Step 2: Write to the other blocks
-      if (idx == 16)
-      {
-        memset(blockBuffer, 0, sizeof(blockBuffer));
-        if (!(nfc.mifareclassic_WriteDataBlock((BLOCK_NUMBER_OF_SECTOR_TRAILER(idx)) - 3, blockBuffer)))
-        {
-          Serial.print("Unable to write to sector "); Serial.println(numOfSector);
-          return;
-        }
-      }
-      if ((idx == 0) || (idx == 16))
-      {
-        memset(blockBuffer, 0, sizeof(blockBuffer));
-        if (!(nfc.mifareclassic_WriteDataBlock((BLOCK_NUMBER_OF_SECTOR_TRAILER(idx)) - 2, blockBuffer)))
-        {
-          Serial.print("Unable to write to sector "); Serial.println(numOfSector);
-          return;
-        }
-      }
-      else
-      {
-        memset(blockBuffer, 0, sizeof(blockBuffer));
-        if (!(nfc.mifareclassic_WriteDataBlock((BLOCK_NUMBER_OF_SECTOR_TRAILER(idx)) - 3, blockBuffer)))
-        {
-          Serial.print("Unable to write to sector "); Serial.println(numOfSector);
-          return;
-        }
-        if (!(nfc.mifareclassic_WriteDataBlock((BLOCK_NUMBER_OF_SECTOR_TRAILER(idx)) - 2, blockBuffer)))
-        {
-          Serial.print("Unable to write to sector "); Serial.println(numOfSector);
-          return;
-        }
-      }
-      memset(blockBuffer, 0, sizeof(blockBuffer));
-      if (!(nfc.mifareclassic_WriteDataBlock((BLOCK_NUMBER_OF_SECTOR_TRAILER(idx)) - 1, blockBuffer)))
-      {
-        Serial.print("Unable to write to sector "); Serial.println(numOfSector);
-        return;
-      }
-      
-      // Step 3: Reset both keys to 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
-      memcpy(blockBuffer, KEY_DEFAULT_KEYAB, sizeof(KEY_DEFAULT_KEYAB));
-      memcpy(blockBuffer + 6, blankAccessBits, sizeof(blankAccessBits));
-      blockBuffer[9] = 0x69;
-      memcpy(blockBuffer + 10, KEY_DEFAULT_KEYAB, sizeof(KEY_DEFAULT_KEYAB));
-
-      // Step 4: Write the trailer block
-      if (!(nfc.mifareclassic_WriteDataBlock((BLOCK_NUMBER_OF_SECTOR_TRAILER(idx)), blockBuffer)))
-      {
-        Serial.print("Unable to write trailer block of sector "); Serial.println(numOfSector);
-        return;
-      }
-    }
-  }
-  
-  // Wait a bit before trying again
-  Serial.println("\n\nDone!");
-  delay(1000);
-  Serial.flush();
-  while(Serial.available()) Serial.read();
-}
\ No newline at end of file

--- a/PN532/examples/mifareclassic_updatendef/mifareclassic_updatendef.pde	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,145 +0,0 @@
-/**************************************************************************/
-/*!
-    Updates a sector that is already formatted for NDEF (using
-    mifareclassic_formatndef.pde for example), inserting a new url
-
-    To enable debug message, define DEBUG in PN532/PN532_debug.h
-*/
-/**************************************************************************/
-
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include "PN532.h"
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-
-
-/*  
-    We can encode many different kinds of pointers to the card,
-    from a URL, to an Email address, to a phone number, and many more
-    check the library header .h file to see the large # of supported
-    prefixes! 
-*/
-// For a http://www. url:
-const char * url = "seeedstudio.com";
-uint8_t ndefprefix = NDEF_URIPREFIX_HTTP_WWWDOT;
-
-// for an email address
-//const char * url = "mail@example.com";
-//uint8_t ndefprefix = NDEF_URIPREFIX_MAILTO;
-
-// for a phone number
-//const char * url = "+1 212 555 1212";
-//uint8_t ndefprefix = NDEF_URIPREFIX_TEL;
-
-
-void setup(void) {
-  Serial.begin(115200);
-  Serial.println("Looking for PN532...");
-
-  nfc.begin();
-
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-  
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); 
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); 
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-  
-  // configure board to read RFID tags
-  nfc.SAMConfig();
-}
-
-void loop(void) {
-  uint8_t success;                          // Flag to check if there was an error with the PN532
-  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-  uint8_t uidLength;                        // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
-  bool authenticated = false;               // Flag to indicate if the sector is authenticated
-
-  // Use the default NDEF keys (these would have have set by mifareclassic_formatndef.pde!)
-  uint8_t keya[6] = { 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5 };
-  uint8_t keyb[6] = { 0xD3, 0xF7, 0xD3, 0xF7, 0xD3, 0xF7 };
-
-  Serial.println("Place your NDEF formatted Mifare Classic card on the reader to update the");
-  Serial.println("NDEF record and press any key to continue ...");
-  // Wait for user input before proceeding
-  while (!Serial.available());
-  // a key was pressed1
-  while (Serial.available()) Serial.read();
-    
-  // Wait for an ISO14443A type card (Mifare, etc.).  When one is found
-  // 'uid' will be populated with the UID, and uidLength will indicate
-  // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
-  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);
-  
-  if (success) 
-  {
-    // Display some basic information about the card
-    Serial.println("Found an ISO14443A card");
-    Serial.print("  UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
-    Serial.print("  UID Value: ");
-    nfc.PrintHex(uid, uidLength);
-    Serial.println("");
-    
-    // Make sure this is a Mifare Classic card
-    if (uidLength != 4)
-    {
-      Serial.println("Ooops ... this doesn't seem to be a Mifare Classic card!"); 
-      return;
-    }
-    
-    // We probably have a Mifare Classic card ... 
-    Serial.println("Seems to be a Mifare Classic card (4 byte UID)");
-
-    // Check if this is an NDEF card (using first block of sector 1 from mifareclassic_formatndef.pde)
-    // Must authenticate on the first key using 0xD3 0xF7 0xD3 0xF7 0xD3 0xF7
-    success = nfc.mifareclassic_AuthenticateBlock (uid, uidLength, 4, 0, keyb);
-    if (!success)
-    {
-      Serial.println("Unable to authenticate block 4 ... is this card NDEF formatted?");
-      return;
-    }
-    
-    Serial.println("Authentication succeeded (seems to be an NDEF/NFC Forum tag) ...");
-
-    // Authenticated seems to have worked
-    // Try to write an NDEF record to sector 1
-    // Use 0x01 for the URI Identifier Code to prepend "http://www."
-    // to the url (and save some space).  For information on URI ID Codes
-    // see http://www.ladyada.net/wiki/private/articlestaging/nfc/ndef
-    if (strlen(url) > 38)
-    {
-      // The length is also checked in the WriteNDEFURI function, but lets
-      // warn users here just in case they change the value and it's bigger
-      // than it should be
-      Serial.println("URI is too long ... must be less than 38 characters!");
-      return;
-    }
-    
-    Serial.println("Updating sector 1 with URI as NDEF Message");
-    
-    // URI is within size limits ... write it to the card and report success/failure
-    success = nfc.mifareclassic_WriteNDEFURI(1, ndefprefix, url);
-    if (success)
-    {
-      Serial.println("NDEF URI Record written to sector 1");
-      Serial.println("");      
-    }
-    else
-    {
-      Serial.println("NDEF Record creation failed! :(");
-    }
-  }
-  
-  // Wait a bit before trying again
-  Serial.println("\n\nDone!");
-  delay(1000);
-  Serial.flush();
-  while(Serial.available()) Serial.read();
-}

--- a/PN532/examples/p2p_raw/p2p_raw.ino	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,51 +0,0 @@
-// snep_test.ino
-// send a SNEP message to adnroid and get a message from android
-
-#include "SPI.h"
-#include "PN532_SPI.h"
-#include "llcp.h"
-#include "snep.h"
-
-PN532_SPI pn532spi(SPI, 10);
-SNEP nfc(pn532spi);
-
-void setup()
-{
-    Serial.begin(115200);
-    Serial.println("-------Peer to Peer--------");
-}
-
-uint8_t message[] = {
-0xD2, 0xA, 0xB, 0x74,0x65, 0x78, 0x74, 0x2F, 0x70, 0x6C, 
-0x61, 0x69, 0x6E, 0x68, 0x65, 0x6C, 0x6C, 0x6F, 0x20, 0x77, 
-0x6F, 0x72, 0x6C, 0x64};
-
-uint8_t buf[128];
-
-void loop()
-{
-
-    nfc.write(message, sizeof(message));
-    delay(3000);
-
-    int16_t len = nfc.read(buf, sizeof(buf));
-    if (len > 0) {
-      Serial.println("get a SNEP message:");
-      for (uint8_t i = 0; i < len; i++) {
-        Serial.print(buf[i], HEX);
-        Serial.print(' ');
-      }
-      Serial.print('\n');
-      for (uint8_t i = 0; i < len; i++) {
-        char c = buf[i];
-        if (c <= 0x1f || c > 0x7f) {
-          Serial.print('.');
-        } else {
-          Serial.print(c);
-        }
-      }
-      Serial.print('\n');
-    }
-    delay(3000);
-}
-

--- a/PN532/examples/p2p_with_ndef_library/p2p_with_ndef_library.ino	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,55 +0,0 @@
-// send a NDEF message to adnroid or get a NDEF message
-//
-// note: [NDEF library](https://github.com/Don/NDEF) is needed.
-
-#include "SPI.h"
-#include "PN532_SPI.h"
-#include "snep.h"
-#include "NdefMessage.h"
-
-PN532_SPI pn532spi(SPI, 10);
-SNEP nfc(pn532spi);
-uint8_t ndefBuf[128];
-
-void setup()
-{
-    Serial.begin(115200);
-    Serial.println("-------Peer to Peer--------");
-}
-
-void loop()
-{
-#if 1
-    Serial.println("Send a message to Android");
-    NdefMessage message = NdefMessage();
-    message.addUriRecord("http://www.seeedstudio.com");
-    int messageSize = message.getEncodedSize();
-    if (messageSize > sizeof(ndefBuf)) {
-        Serial.println("ndefBuf is too small");
-        while (1) {
-        }
-
-    }
-
-    message.encode(ndefBuf);
-    if (0 >= nfc.write(ndefBuf, messageSize)) {
-        Serial.println("Failed");
-    } else {
-        Serial.println("Success");
-    }
-
-    delay(3000);
-#else
-    Serial.println("Get a message from Android");
-    int msgSize = nfc.read(ndefBuf, sizeof(ndefBuf));
-    if (msgSize > 0) {
-        NdefMessage msg  = NdefMessage(ndefBuf, msgSize);
-        msg.print();
-        Serial.println("\nSuccess");
-    } else {
-        Serial.println("failed");
-    }
-    delay(3000);
-#endif
-}
-

--- a/PN532/examples/readMifare/readMifare.pde	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,145 +0,0 @@
-/**************************************************************************/
-/*! 
-    This example will wait for any ISO14443A card or tag, and
-    depending on the size of the UID will attempt to read from it.
-   
-    If the card has a 4-byte UID it is probably a Mifare
-    Classic card, and the following steps are taken:
-   
-    - Authenticate block 4 (the first block of Sector 1) using
-      the default KEYA of 0XFF 0XFF 0XFF 0XFF 0XFF 0XFF
-    - If authentication succeeds, we can then read any of the
-      4 blocks in that sector (though only block 4 is read here)
-	 
-    If the card has a 7-byte UID it is probably a Mifare
-    Ultralight card, and the 4 byte pages can be read directly.
-    Page 4 is read by default since this is the first 'general-
-    purpose' page on the tags.
-
-    To enable debug message, define DEBUG in PN532/PN532_debug.h
-*/
-/**************************************************************************/
-
-#include <SPI.h>
-#include <PN532_SPI.h>
-#include "PN532.h"
-
-PN532_SPI pn532spi(SPI, 10);
-PN532 nfc(pn532spi);
-
-void setup(void) {
-  Serial.begin(115200);
-  Serial.println("Hello!");
-
-  nfc.begin();
-
-  uint32_t versiondata = nfc.getFirmwareVersion();
-  if (! versiondata) {
-    Serial.print("Didn't find PN53x board");
-    while (1); // halt
-  }
-  // Got ok data, print it out!
-  Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); 
-  Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); 
-  Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
-  
-  // configure board to read RFID tags
-  nfc.SAMConfig();
-  
-  Serial.println("Waiting for an ISO14443A Card ...");
-}
-
-
-void loop(void) {
-  uint8_t success;
-  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-  uint8_t uidLength;                        // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
-    
-  // Wait for an ISO14443A type cards (Mifare, etc.).  When one is found
-  // 'uid' will be populated with the UID, and uidLength will indicate
-  // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
-  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);
-  
-  if (success) {
-    // Display some basic information about the card
-    Serial.println("Found an ISO14443A card");
-    Serial.print("  UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
-    Serial.print("  UID Value: ");
-    nfc.PrintHex(uid, uidLength);
-    Serial.println("");
-    
-    if (uidLength == 4)
-    {
-      // We probably have a Mifare Classic card ... 
-      Serial.println("Seems to be a Mifare Classic card (4 byte UID)");
-	  
-      // Now we need to try to authenticate it for read/write access
-      // Try with the factory default KeyA: 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
-      Serial.println("Trying to authenticate block 4 with default KEYA value");
-      uint8_t keya[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-	  
-	  // Start with block 4 (the first block of sector 1) since sector 0
-	  // contains the manufacturer data and it's probably better just
-	  // to leave it alone unless you know what you're doing
-      success = nfc.mifareclassic_AuthenticateBlock(uid, uidLength, 4, 0, keya);
-	  
-      if (success)
-      {
-        Serial.println("Sector 1 (Blocks 4..7) has been authenticated");
-        uint8_t data[16];
-		
-        // If you want to write something to block 4 to test with, uncomment
-		// the following line and this text should be read back in a minute
-        // data = { 'a', 'd', 'a', 'f', 'r', 'u', 'i', 't', '.', 'c', 'o', 'm', 0, 0, 0, 0};
-        // success = nfc.mifareclassic_WriteDataBlock (4, data);
-
-        // Try to read the contents of block 4
-        success = nfc.mifareclassic_ReadDataBlock(4, data);
-		
-        if (success)
-        {
-          // Data seems to have been read ... spit it out
-          Serial.println("Reading Block 4:");
-          nfc.PrintHexChar(data, 16);
-          Serial.println("");
-		  
-          // Wait a bit before reading the card again
-          delay(1000);
-        }
-        else
-        {
-          Serial.println("Ooops ... unable to read the requested block.  Try another key?");
-        }
-      }
-      else
-      {
-        Serial.println("Ooops ... authentication failed: Try another key?");
-      }
-    }
-    
-    if (uidLength == 7)
-    {
-      // We probably have a Mifare Ultralight card ...
-      Serial.println("Seems to be a Mifare Ultralight tag (7 byte UID)");
-	  
-      // Try to read the first general-purpose user page (#4)
-      Serial.println("Reading page 4");
-      uint8_t data[32];
-      success = nfc.mifareultralight_ReadPage (4, data);
-      if (success)
-      {
-        // Data seems to have been read ... spit it out
-        nfc.PrintHexChar(data, 4);
-        Serial.println("");
-		
-        // Wait a bit before reading the card again
-        delay(1000);
-      }
-      else
-      {
-        Serial.println("Ooops ... unable to read the requested page!?");
-      }
-    }
-  }
-}
-

--- a/SPIClass.cpp	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,124 +0,0 @@
-/*
- * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st>
- * SPI Master library for arduino.
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of either the GNU General Public License version 2
- * or the GNU Lesser General Public License version 2.1, both as
- * published by the Free Software Foundation.
- */
-
-#include "arduino.h"
-#include "SPIClass.h"
-
-SPIClass SPI;
-
-void SPIClass::begin() {
-
-	// When the SS pin is set as OUTPUT, it can be used as
-	// a general purpose output port (it doesn't influence
-	// SPI operations).
-	pinMode(SS, OUTPUT);
-  
-	// Set SS to high so a connected chip will be "deselected" by default
-	digitalWrite(SS, HIGH);
-  
-	pinMode(SCK,  ALTERNATE);
-	pinMode(MOSI, ALTERNATE);
-	pinMode(MISO, ALTERNATE);
-  
-	spi = SPI1;
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
-
-	SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
-	SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
-	SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-	SPI_InitStructure.SPI_BaudRatePrescaler = SPI_CLOCK_DIV4;	
-	SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
-	SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-	SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-	SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
-	SPI_InitStructure.SPI_CRCPolynomial = 7;
-
-	SPI_Init(spi,&SPI_InitStructure);
-	SPI_RxFIFOThresholdConfig(spi,SPI_RxFIFOThreshold_QF);
-	SPI_Cmd(spi,ENABLE);
-}
-
-
-void SPIClass::end() {
-	SPI_Cmd(spi,DISABLE);
-}
-
-void SPIClass::setBitOrder(uint8_t bitOrder)
-{
-	SPI_Cmd(spi,DISABLE);
-	if(bitOrder == LSBFIRST)
-	{
-		SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_LSB;
-	}
-	else
-	{
-		SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-	}
-	SPI_Init(spi,&SPI_InitStructure);
-	SPI_Cmd(spi,ENABLE);
-}
-
-void SPIClass::setDataMode(uint8_t mode)
-{
-	SPI_Cmd(spi,DISABLE);
-	if (mode == SPI_MODE0)
-	{
-		SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
-		SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
-	} 
-	else if(mode == SPI_MODE1)
-	{
-		SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
-		SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
-	} 
-	else if(mode == SPI_MODE2)
-	{
-		SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
-		SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
-	} 
-	else if(mode == SPI_MODE3)
-	{
-		SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
-		SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
-	}
-
-	SPI_Init(spi,&SPI_InitStructure);
-	SPI_Cmd(spi,ENABLE);
-}
-
-void SPIClass::setClockDivider(uint8_t rate)
-{
-	SPI_Cmd(spi,DISABLE);
-	SPI_InitStructure.SPI_BaudRatePrescaler = rate;
-
-	SPI_Init(spi,&SPI_InitStructure);
-	SPI_Cmd(spi,ENABLE);
-}
-
-byte SPIClass::transfer(byte _data) {
-	uint8_t d = _data;
-
-    while (SPI_I2S_GetFlagStatus(spi,SPI_I2S_FLAG_TXE) == RESET);
-    SPI_SendData8(spi,d);
-
-    while (SPI_I2S_GetFlagStatus(spi,SPI_I2S_FLAG_RXNE) == RESET);
-    d = SPI_ReceiveData8(spi);
-    return d ;
-}
-
-void SPIClass::attachInterrupt(void) {
-	// Should be enableInterrupt()
-}
-
-void SPIClass::detachInterrupt(void) {
-	// Should be disableInterrupt()
-}
-
-

--- a/SPIClass.h	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st>
- * SPI Master library for arduino.
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of either the GNU General Public License version 2
- * or the GNU Lesser General Public License version 2.1, both as
- * published by the Free Software Foundation.
- */
-
-#ifndef _SPI_H_INCLUDED
-#define _SPI_H_INCLUDED
-
-#include <stdio.h>
-#include <Arduino.h>
-
-
-#define SPI_CLOCK_DIV2     SPI_BaudRatePrescaler_2  
-#define SPI_CLOCK_DIV4     SPI_BaudRatePrescaler_4  
-#define SPI_CLOCK_DIV8     SPI_BaudRatePrescaler_8  
-#define SPI_CLOCK_DIV16    SPI_BaudRatePrescaler_16 
-#define SPI_CLOCK_DIV32    SPI_BaudRatePrescaler_32 
-#define SPI_CLOCK_DIV64    SPI_BaudRatePrescaler_64 
-#define SPI_CLOCK_DIV128   SPI_BaudRatePrescaler_128
-#define SPI_CLOCK_DIV256   SPI_BaudRatePrescaler_256
-
-#define SPI_MODE0 0x00
-#define SPI_MODE1 0x04
-#define SPI_MODE2 0x08
-#define SPI_MODE3 0x0C
-
-
-class SPIClass {
-public:
-  uint8_t transfer(uint8_t _data);
-
-  // SPI Configuration methods
-
-  inline static void attachInterrupt();
-  inline static void detachInterrupt(); // Default
-
-  void begin(); // Default
-  void end();
-
-  void setBitOrder(uint8_t);
-  void setDataMode(uint8_t);
-  void setClockDivider(uint8_t);
-private:
-  SPI_TypeDef *spi;
-  SPI_InitTypeDef SPI_InitStructure;
-  uint16_t bitOrder;
-};
-
-extern SPIClass SPI;
-
-
-
-#endif

--- a/Wire.cpp	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,391 +0,0 @@
-/*
- * TwoWire.h
- * Copyright (c) 2011 Cristian Maglie <c.maglie@bug.st>.
- * All rights reserved.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-extern "C" {
-#include <string.h>
-}
-
-#include "Wire.h"
-
-
-
-#define EVENT_TIMEOUT       100
-
-
-TwoWire::TwoWire(I2C_TypeDef *_twi) :
-	twi(_twi), rxBufferIndex(0), rxBufferLength(0), txAddress(0),
-			txBufferLength(0), srvBufferIndex(0), srvBufferLength(0), status(
-					UNINITIALIZED){
-	// Empty
-}
-
-void TwoWire::begin(void) {
-	if (onBeginCallback)
-		onBeginCallback();
-
-	if (twi==I2C1)
-	{
-		RCC_I2CCLKConfig(RCC_I2C1CLK_HSI);
-		RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
-
-		pinMode(SDA, ALTERNATE);
-		pinMode(SCL, ALTERNATE);
-	} 
-	else if (twi == I2C2) 
-	{
-		RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);
-
-		pinMode(SDA1, ALTERNATE);
-		pinMode(SCL1, ALTERNATE);
-	}
-
-
-	I2C_DeInit(twi);
-
-	I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
-	I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
-	I2C_InitStructure.I2C_DigitalFilter = 0x00;
-	if (status == UNINITIALIZED)
-	{
-		I2C_InitStructure.I2C_OwnAddress1 = 0x00;
-		status = MASTER_IDLE;
-	}
-	I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
-	I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
-	I2C_InitStructure.I2C_Timing = 0x00E0D3FF;
-	I2C_Init(twi, &I2C_InitStructure);
-
-	I2C_Cmd(twi, ENABLE);
-
-	
-}
-
-void TwoWire::begin(uint8_t address) {
-	if (onBeginCallback)
-		onBeginCallback();
-	status = SLAVE_IDLE;
-	if (twi==I2C1)
-	{
-		RCC_I2CCLKConfig(RCC_I2C1CLK_HSI);
-		RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
-
-		pinMode(SDA, ALTERNATE);
-		pinMode(SCL, ALTERNATE);
-	}
-
-
-	I2C_DeInit(twi);
-
-	I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
-	I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
-	I2C_InitStructure.I2C_DigitalFilter = 0x00;
-		I2C_InitStructure.I2C_OwnAddress1 = address;
-	I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
-	I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
-	I2C_InitStructure.I2C_Timing = 0x00E0D3FF;
-	I2C_Init(twi, &I2C_InitStructure);
-
-	NVIC_SetPriority(I2C1_IRQn, 0);
-	NVIC_EnableIRQ(I2C1_IRQn);   
-	I2C_Cmd(twi, ENABLE);
-	I2C_ITConfig(twi, I2C_IT_ADDRI, ENABLE);
-}
-
-void TwoWire::begin(int address) {
-	address <<= 1;
-	begin((uint8_t) address);
-}
-
-uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity, uint8_t sendStop) {
-	address <<= 1;
-	if (quantity > BUFFER_LENGTH)
-		quantity = BUFFER_LENGTH;
-	uint32_t _millis;
-	
-	_millis = millis();
-	while(I2C_GetFlagStatus(twi, I2C_FLAG_BUSY) != RESET)
-	{
-		if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-	}
-
-	I2C_TransferHandling(twi, address, quantity, I2C_AutoEnd_Mode, I2C_Generate_Start_Read);
-
-	
-	uint8_t *pBuffer = rxBuffer;
-	uint8_t numByteToRead = quantity;
-	uint8_t bytesRead = 0;	
-	/* While there is data to be read */
-	while(numByteToRead)
-	{
-		_millis = millis();
-		while(I2C_GetFlagStatus(twi, I2C_FLAG_RXNE) == RESET)
-		{
-			if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-		}
-		/* Read a byte from the Slave */
-		*pBuffer = I2C_ReceiveData(twi);
-			
-		bytesRead++;
-
-		/* Point to the next location where the byte read will be saved */
-		pBuffer++;
-
-		/* Decrement the read bytes counter */
-		numByteToRead--;		
-	}
-	_millis = millis();
-	while(I2C_GetFlagStatus(twi, I2C_FLAG_STOPF) == RESET)
-	{
-		if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-	}
-	// set rx buffer iterator vars
-	rxBufferIndex = 0;
-	rxBufferLength = bytesRead;
-	
-	return bytesRead;
-}
-
-uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity) {
-	return requestFrom((uint8_t) address, (uint8_t) quantity, (uint8_t) true);
-}
-
-uint8_t TwoWire::requestFrom(int address, int quantity) {
-	return requestFrom((uint8_t) address, (uint8_t) quantity, (uint8_t) true);
-}
-
-uint8_t TwoWire::requestFrom(int address, int quantity, int sendStop) {
-	return requestFrom((uint8_t) address, (uint8_t) quantity, (uint8_t) sendStop);
-}
-
-void TwoWire::beginTransmission(uint8_t address) {
-	status = MASTER_SEND;
-
-	// save address of target and empty buffer
-	txAddress = address;
-	txBufferLength = 0;
-}
-
-void TwoWire::beginTransmission(int address) {
-	address <<= 1;
-	beginTransmission((uint8_t) address);
-}
-
-//
-//	Originally, 'endTransmission' was an f(void) function.
-//	It has been modified to take one parameter indicating
-//	whether or not a STOP should be performed on the bus.
-//	Calling endTransmission(false) allows a sketch to
-//	perform a repeated start.
-//
-//	WARNING: Nothing in the library keeps track of whether
-//	the bus tenure has been properly ended with a STOP. It
-//	is very possible to leave the bus in a hung state if
-//	no call to endTransmission(true) is made. Some I2C
-//	devices will behave oddly if they do not see a STOP.
-//
-uint8_t TwoWire::endTransmission(uint8_t sendStop) {
-	uint32_t _millis;
-	
-	_millis = millis();
-	while(I2C_GetFlagStatus(twi, I2C_FLAG_BUSY) != RESET)
-	{
-		if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-	}
-	if (sendStop == true)
-	{
-		I2C_TransferHandling(twi, txAddress, txBufferLength, I2C_AutoEnd_Mode, I2C_Generate_Start_Write);
-	} 
-	else 
-	{
-		I2C_TransferHandling(twi, txAddress, txBufferLength, I2C_SoftEnd_Mode, I2C_Generate_Start_Write);
-	}	
-	uint8_t *pBuffer = txBuffer;
-	uint8_t NumByteToWrite = txBufferLength;
-	/* While there is data to be read */
-	while(NumByteToWrite--)
-	{
-		_millis = millis();
-		while(I2C_GetFlagStatus(twi, I2C_FLAG_TXIS) == RESET)
-		{
-			if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-		}
-		/* Send the current byte to slave */
-		I2C_SendData(twi, *pBuffer++);	
-	}
-	_millis = millis();
-	if (sendStop == true)
-	{
-		while(I2C_GetFlagStatus(twi, I2C_FLAG_STOPF) == RESET)
-		{
-			if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-		}
-	}
-	else
-	{
-		while(I2C_GetFlagStatus(twi, I2C_FLAG_STOPF) == RESET)
-		{
-			if(EVENT_TIMEOUT < (millis() - _millis)) return 0;
-		}	
-	}
-	// reset tx buffer iterator vars
-	txBufferLength = 0;
-
-	status = MASTER_IDLE;
-	return 0;
-}
-
-//	This provides backwards compatibility with the original
-//	definition, and expected behaviour, of endTransmission
-//
-uint8_t TwoWire::endTransmission(void)
-{
-	return endTransmission(true);
-}
-
-size_t TwoWire::write(uint8_t data) {
-	if (status == MASTER_SEND) {
-		if (txBufferLength >= BUFFER_LENGTH)
-			return 0;
-		txBuffer[txBufferLength++] = data;
-		return 1;
-	} else {
-		if (srvBufferLength >= BUFFER_LENGTH)
-			return 0;
-		srvBuffer[srvBufferLength++] = data;
-		return 1;
-	}
-}
-
-size_t TwoWire::write(const uint8_t *data, size_t quantity) {
-	if (status == MASTER_SEND) {
-		for (size_t i = 0; i < quantity; ++i) {
-			if (txBufferLength >= BUFFER_LENGTH)
-				return i;
-			txBuffer[txBufferLength++] = data[i];
-		}
-	} else {
-		for (size_t i = 0; i < quantity; ++i) {
-			if (srvBufferLength >= BUFFER_LENGTH)
-				return i;
-			srvBuffer[srvBufferLength++] = data[i];
-		}
-	}
-	return quantity;
-}
-
-int TwoWire::available(void) {
-	return rxBufferLength - rxBufferIndex;
-}
-
-int TwoWire::read(void) {
-	if (rxBufferIndex < rxBufferLength)
-		return rxBuffer[rxBufferIndex++];
-	return -1;
-}
-
-int TwoWire::peek(void) {
-	if (rxBufferIndex < rxBufferLength)
-		return rxBuffer[rxBufferIndex];
-	return -1;
-}
-
-void TwoWire::flush(void) {
-	// Do nothing, use endTransmission(..) to force
-	// data transfer.
-}
-
-void TwoWire::onReceive(void(*function)(int)) {
-	onReceiveCallback = function;
-}
-
-void TwoWire::onRequest(void(*function)(void)) {
-	onRequestCallback = function;
-}
-
-void TwoWire::onService(void) 
-{
-	if (I2C_GetITStatus(twi, I2C_IT_ADDR) == SET)
-	{
-		I2C_ITConfig(twi, I2C_IT_RXI | I2C_IT_TXI | I2C_IT_STOPI, ENABLE);
-		srvBufferLength = 0;
-		srvBufferIndex = 0;
-		if (twi->ISR & (1 << 16)) {
-			status = SLAVE_SEND;
-			if (onRequestCallback)
-				onRequestCallback();
-		} else {
-			status = SLAVE_RECV;
-		}
-
-		I2C_ClearITPendingBit(twi, I2C_IT_ADDR);
-	}
-	if (I2C_GetITStatus(twi, I2C_IT_TXIS) == SET)
-	{
-		uint8_t c = 'x';
-		if (srvBufferIndex < srvBufferLength)
-			c = srvBuffer[srvBufferIndex++];
-		I2C_SendData(twi, c);
-	}
-	if (I2C_GetITStatus(twi, I2C_IT_RXNE) == SET)
-	{
-		if (srvBufferLength < BUFFER_LENGTH)
-			srvBuffer[srvBufferLength++] = I2C_ReceiveData(twi);
-	}
-	if (I2C_GetITStatus(twi, I2C_IT_STOPF) == SET)
-	{
-		if (status == SLAVE_RECV && onReceiveCallback) {
-			// Copy data into rxBuffer
-			// (allows to receive another packet while the
-			// user program reads actual data)
-			for (uint8_t i = 0; i < srvBufferLength; ++i)
-				rxBuffer[i] = srvBuffer[i];
-			rxBufferIndex = 0;
-			rxBufferLength = srvBufferLength;
-			// Alert calling program
-			onReceiveCallback( rxBufferLength);
-		}
-		I2C_ITConfig(twi, I2C_IT_ADDRI, ENABLE);
-		I2C_ITConfig(twi, I2C_IT_RXI | I2C_IT_TXI | I2C_IT_STOPI, DISABLE);
-		I2C_ClearITPendingBit(twi, I2C_IT_STOPF);
-	}
-}
-
-
-
-
-TwoWire Wire = TwoWire(I2C1);
-TwoWire Wire1 = TwoWire(I2C2);
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-void WIRE_ISR_HANDLER(void) {
-	Wire.onService();
-}
-
-void WIRE1_ISR_HANDLER(void) {
-	Wire1.onService();
-}
-#ifdef __cplusplus
-}
-#endif
-
-
-

--- a/Wire.h	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,115 +0,0 @@
-/*
- * TwoWire.h 
- * Copyright (c) 2011 Cristian Maglie <c.maglie@bug.st>.
- * All rights reserved.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef TwoWire_h
-#define TwoWire_h
-
-// Include Atmel CMSIS driver
-//#include <include/twi.h>
-
-#include "Stream.h"
-#include "variant.h"
-
-#define BUFFER_LENGTH 32
-
-class TwoWire : public Stream {
-public:
-	TwoWire(I2C_TypeDef *twi);
-	void begin();
-	void begin(uint8_t);
-	void begin(int);
-	void beginTransmission(uint8_t);
-	void beginTransmission(int);
-	uint8_t endTransmission(void);
-    uint8_t endTransmission(uint8_t);
-	uint8_t requestFrom(uint8_t, uint8_t);
-    uint8_t requestFrom(uint8_t, uint8_t, uint8_t);
-	uint8_t requestFrom(int, int);
-    uint8_t requestFrom(int, int, int);
-	virtual size_t write(uint8_t);
-	virtual size_t write(const uint8_t *, size_t);
-	virtual int available(void);
-	virtual int read(void);
-	virtual int peek(void);
-	virtual void flush(void);
-	void onReceive(void(*)(int));
-	void onRequest(void(*)(void));
-
-    inline size_t write(unsigned long n) { return write((uint8_t)n); }
-    inline size_t write(long n) { return write((uint8_t)n); }
-    inline size_t write(unsigned int n) { return write((uint8_t)n); }
-    inline size_t write(int n) { return write((uint8_t)n); }
-    using Print::write;
-
-	void onService(void);
-
-private:
-	// RX Buffer
-	uint8_t rxBuffer[BUFFER_LENGTH];
-	uint8_t rxBufferIndex;
-	uint8_t rxBufferLength;
-
-	// TX Buffer
-	uint8_t txAddress;
-	uint8_t txBuffer[BUFFER_LENGTH];
-	uint8_t txBufferLength;
-
-	// Service buffer
-	uint8_t srvBuffer[BUFFER_LENGTH];
-	uint8_t srvBufferIndex;
-	uint8_t srvBufferLength;
-
-	// Callback user functions
-	void (*onRequestCallback)(void);
-	void (*onReceiveCallback)(int);
-
-	// Called before initialization
-	void (*onBeginCallback)(void);
-
-	// TWI instance
-	I2C_TypeDef *twi;
-	I2C_InitTypeDef I2C_InitStructure;
-
-	// TWI state
-	enum TwoWireStatus {
-		UNINITIALIZED,
-		MASTER_IDLE,
-		MASTER_SEND,
-		MASTER_RECV,
-		SLAVE_IDLE,
-		SLAVE_RECV,
-		SLAVE_SEND
-	};
-	TwoWireStatus status;
-
-	// TWI clock frequency
-	static const uint32_t TWI_CLOCK = 100000;
-
-	// Timeouts (
-	static const uint32_t RECV_TIMEOUT = 100000;
-	static const uint32_t XMIT_TIMEOUT = 100000;
-};
-
-extern TwoWire Wire;
-extern TwoWire Wire1;
-
-
-#endif
-

--- a/wiring_constants.h	Tue Sep 13 06:01:19 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,106 +0,0 @@
-/*
-  Copyright (c) 2014 BestU. All right reserved. 
-  Copyright (c) 2011 Arduino.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the GNU Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#ifndef _WIRING_CONSTANTS_
-#define _WIRING_CONSTANTS_
-
-#ifdef __cplusplus
-extern "C"{
-#endif // __cplusplus
-
-#define HIGH 0x1
-#define LOW  0x0
-
-#define INPUT     0x0
-#define OUTPUT    0x1
-#define ALTERNATE 0x2
-#define ANALOG    0x3 
-
-#define true 0x1
-#define false 0x0
-
-#define PI 3.1415926535897932384626433832795
-#define HALF_PI 1.5707963267948966192313216916398
-#define TWO_PI 6.283185307179586476925286766559
-#define DEG_TO_RAD 0.017453292519943295769236907684886
-#define RAD_TO_DEG 57.295779513082320876798154814105
-#define EULER 2.718281828459045235360287471352
-
-#define SERIAL  0x0
-#define DISPLAY 0x1
-
-enum BitOrder {
-	LSBFIRST = 0,
-	MSBFIRST = 1
-};
-
-//      LOW 0
-//      HIGH 1
-#define CHANGE 2
-#define FALLING 3
-#define RISING 4
-
-#define DEFAULT 1
-#define EXTERNAL 0
-
-// undefine stdlib's abs if encountered
-#ifdef abs
-#undef abs
-#endif // abs
-
-#ifndef min
-#define min(a,b) ((a)<(b)?(a):(b))
-#endif // min
-
-#ifndef max
-#define max(a,b) ((a)>(b)?(a):(b))
-#endif // max
-
-#define abs(x) ((x)>0?(x):-(x))
-#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
-#define radians(deg) ((deg)*DEG_TO_RAD)
-#define degrees(rad) ((rad)*RAD_TO_DEG)
-#define sq(x) ((x)*(x))
-
-#define interrupts() __enable_irq()
-#define noInterrupts() __disable_irq()
-
-#define lowByte(w) ((uint8_t) ((w) & 0xff))
-#define highByte(w) ((uint8_t) ((w) >> 8))
-
-#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
-#define bitSet(value, bit) ((value) |= (1UL << (bit)))
-#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
-
-typedef unsigned int word;
-
-#define bit(b) (1UL << (b))
-
-// TODO: to be checked
-typedef uint8_t boolean ;
-typedef uint8_t byte ;
-
-
-#ifdef __cplusplus
-} // extern "C"
-#endif // __cplusplus
-
-#endif /* _WIRING_CONSTANTS_ */