File content as of revision 2:a3e52cf86086:

/*
 * nonos.h - CC31xx/CC32xx Host Driver Implementation
 *
 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 
 * 
 * 
 *  Redistribution and use in source and binary forms, with or without 
 *  modification, are permitted provided that the following conditions 
 *  are met:
 *
 *    Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer.
 *
 *    Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the 
 *    documentation and/or other materials provided with the   
 *    distribution.
 *
 *    Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
*/

#ifndef __NONOS_H__
#define	__NONOS_H__

#ifdef	__cplusplus
extern "C" {
#endif


#ifndef SL_PLATFORM_MULTI_THREADED

/* This function call the user defined function, if defined, from the sync wait loop  */
/* The use case of this function is to allow nonos system to call a user function to put the device into sleep */
/* The wake up should be activated after getting an interrupt from the device to Host */
/* The user function must return without blocking to prevent a delay on the event handling */
/*
#define _SlSyncWaitLoopCallback  UserSleepFunction
*/



#define NONOS_WAIT_FOREVER   							0xFF
#define NONOS_NO_WAIT        							0x01

#define NONOS_RET_OK                            (0)
#define NONOS_RET_ERR                           (0xFF)
#define OSI_OK  NONOS_RET_OK

#define __NON_OS_SYNC_OBJ_CLEAR_VALUE				0x11
#define __NON_OS_SYNC_OBJ_SIGNAL_VALUE				0x22
#define __NON_OS_LOCK_OBJ_UNLOCK_VALUE				0x33
#define __NON_OS_LOCK_OBJ_LOCK_VALUE				0x44

/*!
	\brief type definition for the return values of this adaptation layer
*/
typedef _i8 _SlNonOsRetVal_t;

/*!
	\brief type definition for a time value
*/
typedef _u8 _SlNonOsTime_t;

/*!
	\brief 	type definition for a sync object container
	
	Sync object is object used to synchronize between two threads or thread and interrupt handler.
	One thread is waiting on the object and the other thread send a signal, which then
	release the waiting thread.
	The signal must be able to be sent from interrupt context.
	This object is generally implemented by binary semaphore or events.
*/
typedef _u8 _SlNonOsSemObj_t;


#define _SlTime_t       _SlNonOsTime_t

#define _SlSyncObj_t    _SlNonOsSemObj_t

#define _SlLockObj_t    _SlNonOsSemObj_t

#define SL_OS_WAIT_FOREVER     NONOS_WAIT_FOREVER

#define SL_OS_RET_CODE_OK       NONOS_RET_OK       

#define SL_OS_NO_WAIT           NONOS_NO_WAIT





/*!
	\brief 	This function creates a sync object

	The sync object is used for synchronization between different thread or ISR and 
	a thread.

	\param	pSyncObj	-	pointer to the sync object control block
	
	\return upon successful creation the function return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsSyncObjCreate(pSyncObj)			_SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE)

/*!
	\brief 	This function deletes a sync object

	\param	pSyncObj	-	pointer to the sync object control block
	
	\return upon successful deletion the function should return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsSyncObjDelete(pSyncObj)			_SlNonOsSemSet(pSyncObj,0)

/*!
	\brief 		This function generates a sync signal for the object. 
	
	All suspended threads waiting on this sync object are resumed

	\param		pSyncObj	-	pointer to the sync object control block
	
	\return 	upon successful signaling the function should return 0
				Otherwise, a negative value indicating the error code shall be returned
	\note		the function could be called from ISR context
	\warning
*/
#define _SlNonOsSyncObjSignal(pSyncObj)			_SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE)

/*!
	\brief 	This function waits for a sync signal of the specific sync object

	\param	pSyncObj	-	pointer to the sync object control block
	\param	Timeout		-	numeric value specifies the maximum number of mSec to 
							stay suspended while waiting for the sync signal
							Currently, the simple link driver uses only two values:
								- NONOS_WAIT_FOREVER
								- NONOS_NO_WAIT
	
	\return upon successful reception of the signal within the timeout window return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsSyncObjWait(pSyncObj , Timeout)	_SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout)

/*!
	\brief 	This function clears a sync object

	\param	pSyncObj	-	pointer to the sync object control block
	
	\return upon successful clearing the function should return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsSyncObjClear(pSyncObj)			_SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE)

/*!
	\brief 	This function creates a locking object.
	
	The locking object is used for protecting a shared resources between different 
	threads.

	\param	pLockObj	-	pointer to the locking object control block
	
	\return upon successful creation the function should return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsLockObjCreate(pLockObj)			_SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)

/*!
	\brief 	This function deletes a locking object.
	
	\param	pLockObj	-	pointer to the locking object control block
	
	\return upon successful deletion the function should return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsLockObjDelete(pLockObj)			_SlNonOsSemSet(pLockObj,0)

/*!
	\brief 	This function locks a locking object. 
	
	All other threads that call this function before this thread calls 
	the _SlNonOsLockObjUnlock would be suspended	
	
	\param	pLockObj	-	pointer to the locking object control block
	\param	Timeout		-	numeric value specifies the maximum number of mSec to 
							stay suspended while waiting for the locking object
							Currently, the simple link driver uses only two values:
								- NONOS_WAIT_FOREVER
								- NONOS_NO_WAIT
	
	
	\return upon successful reception of the locking object the function should return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsLockObjLock(pLockObj , Timeout)	_SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout)

/*!
	\brief 	This function unlock a locking object.
	
	\param	pLockObj	-	pointer to the locking object control block
	
	\return upon successful unlocking the function should return 0
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
#define _SlNonOsLockObjUnlock(pLockObj)			_SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)


/*!
	\brief 	This function call the pEntry callback from a different context
	
	\param	pEntry		-	pointer to the entry callback function 
	
	\param	pValue		- 	pointer to any type of memory structure that would be
							passed to pEntry callback from the execution thread.
							
	\param	flags		- 	execution flags - reserved for future usage
	
	\return upon successful registration of the spawn the function return 0
			(the function is not blocked till the end of the execution of the function
			and could be returned before the execution is actually completed)
			Otherwise, a negative value indicating the error code shall be returned
	\note
	\warning
*/
_SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags);


/*!
	\brief 	This function must be called from the main loop in non-os paltforms
	
	\param	None
	
	\return 0 - No more activities
			1 - Activity still in progress
	\note
	\warning
*/
_SlNonOsRetVal_t _SlNonOsMainLoopTask(void);

extern _SlNonOsRetVal_t _SlNonOsSemGet(_SlNonOsSemObj_t* pSyncObj, _SlNonOsSemObj_t WaitValue, _SlNonOsSemObj_t SetValue, _SlNonOsTime_t Timeout);
extern _SlNonOsRetVal_t _SlNonOsSemSet(_SlNonOsSemObj_t* pSemObj , _SlNonOsSemObj_t Value);
extern _SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags);
  
#if (defined(_SlSyncWaitLoopCallback))
extern void _SlSyncWaitLoopCallback(void);
#endif


/*****************************************************************************

    Overwrite SimpleLink driver OS adaptation functions


 *****************************************************************************/

#undef sl_SyncObjCreate
#define sl_SyncObjCreate(pSyncObj,pName)           _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE)

#undef sl_SyncObjDelete
#define sl_SyncObjDelete(pSyncObj)                  _SlNonOsSemSet(pSyncObj,0)

#undef sl_SyncObjSignal
#define sl_SyncObjSignal(pSyncObj)                  _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE)

#undef sl_SyncObjSignalFromIRQ
#define sl_SyncObjSignalFromIRQ(pSyncObj)           _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE)

#undef sl_SyncObjWait
#define sl_SyncObjWait(pSyncObj,Timeout)            _SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout)

#undef sl_LockObjCreate
#define sl_LockObjCreate(pLockObj,pName)            _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)

#undef sl_LockObjDelete
#define sl_LockObjDelete(pLockObj)                  _SlNonOsSemSet(pLockObj,0)

#undef sl_LockObjLock
#define sl_LockObjLock(pLockObj,Timeout)            _SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout)

#undef sl_LockObjUnlock
#define sl_LockObjUnlock(pLockObj)                  _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)

#undef sl_Spawn
#define sl_Spawn(pEntry,pValue,flags)               _SlNonOsSpawn(pEntry,pValue,flags)

#undef _SlTaskEntry
#define _SlTaskEntry                                _SlNonOsMainLoopTask

#endif /* !SL_PLATFORM_MULTI_THREADED */

#ifdef  __cplusplus
}
#endif /* __cplusplus */

#endif