Devin Alexander / Mbed OS MAX326xxFTHR_RFM95_LoRa_PingPong

This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.

Dependencies:   BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr

Fork of MAX326xxFTHR_LoRa_PingPong by Devin Alexander

Diff: SX1276GenericPingPong/GenericPingPong.h

Revision:
11:d3a591c20cd7
Parent:
3:dc560d3e9070
Child:
19:9f035b9e65ec
--- a/SX1276GenericPingPong/GenericPingPong.h	Fri Jun 23 11:46:59 2017 +0000
+++ b/SX1276GenericPingPong/GenericPingPong.h	Thu Jun 29 17:44:18 2017 +0000
@@ -34,36 +34,36 @@
 /*!
  * @brief Function to be executed on Radio Tx Done event
  */
-void OnTxDone(void *radio);
+void OnTxDone(void *radio, void *userThisPtr, void *userData);
 
 /*!
  * @brief Function to be executed on Radio Rx Done event
  */
-void OnRxDone(void *radio, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
+void OnRxDone(void *radio, void *userThisPtr, void *userData, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
 
 /*!
  * @brief Function executed on Radio Tx Timeout event
  */
-void OnTxTimeout(void *radio);
+void OnTxTimeout(void *radio, void *userThisPtr, void *userData);
 
 /*!
  * @brief Function executed on Radio Rx Timeout event
  */
-void OnRxTimeout(void *radio);
+void OnRxTimeout(void *radio, void *userThisPtr, void *userData);
 
 /*!
  * @brief Function executed on Radio Rx Error event
  */
-void OnRxError(void *radio);
+void OnRxError(void *radio, void *userThisPtr, void *userData);
 
 /*!
  * @brief Function executed on Radio Fhss Change Channel event
  */
-void OnFhssChangeChannel(void *radio, uint8_t channelIndex );
+void OnFhssChangeChannel(void *radio, void *userThisPtr, void *userData, uint8_t channelIndex);
 
 /*!
  * @brief Function executed on CAD Done event
  */
-void OnCadDone(void *radio);
+void OnCadDone(void *radio, void *userThisPtr, void *userData);
 
 #endif // __MAIN_H__
\ No newline at end of file