This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.
Dependencies: BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr
Fork of MAX326xxFTHR_LoRa_PingPong by
Revision 13:5a32a1922fbc, committed 2017-08-08
- Comitter:
- Helmut64
- Date:
- Tue Aug 08 08:49:06 2017 +0000
- Parent:
- 12:aa287e51c09e
- Child:
- 14:0a23f0ff71ce
- Commit message:
- Updated target to TARGET_DISCO_L072CZ_LRWAN1; Use latest mbed version.; No need to set the system clock anymore because LRWAN1 is not included in mbed.; Updated to latest SX1276GenericLib.
Changed in this revision
--- a/PinMap.h Tue Jul 11 11:37:03 2017 +0000 +++ b/PinMap.h Tue Aug 08 08:49:06 2017 +0000 @@ -10,18 +10,11 @@ #define FEATURE_LORA 1 #elif TARGET_DISCO_L072CZ_LRWAN1 #define FEATURE_LORA 1 - #define B_L072Z_LRWAN1_LORA 1 // the STM Lora Board #endif -#if defined(TARGET_STM32L0) - -#ifdef B_L072Z_LRWAN1_LORA // B-L072Z-LRWAN1 LoRa Board using the Murta SX1276 -#define USER_BUTTON PB_2 // Red not PC13 as used on the Nucleo -#define LED2 PA_5 // Green -#define LED3 PB_6 // Blue -#define LED4 PB_7 // Red +#if defined(TARGET_DISCO_L072CZ_LRWAN1) #define LORA_SPI_MOSI PA_7 #define LORA_SPI_MISO PA_6 @@ -31,14 +24,13 @@ #define LORA_DIO0 PB_4 #define LORA_DIO1 PB_1 #define LORA_DIO2 PB_0 -#define LORA_DIO3 (PinName)0x2D //PC_13 +#define LORA_DIO3 PC_13 #define LORA_DIO4 PA_5 #define LORA_DIO5 PA_4 #define LORA_ANT_RX PA_1 #define LORA_ANT_TX PC_2 #define LORA_ANT_BOOST PC_1 #define LORA_TCXO PA_12 // 32 MHz -#endif // B_L072Z_LRWAN1_LORA
--- a/SX1276GenericLib.lib Tue Jul 11 11:37:03 2017 +0000 +++ b/SX1276GenericLib.lib Tue Aug 08 08:49:06 2017 +0000 @@ -1,1 +1,1 @@ -http://developer.mbed.org/users/Helmut64/code/SX1276GenericLib/#b2d98328fcba +http://developer.mbed.org/users/Helmut64/code/SX1276GenericLib/#019da451b283
--- a/SX1276GenericPingPong/GenericPingPong.cpp Tue Jul 11 11:37:03 2017 +0000 +++ b/SX1276GenericPingPong/GenericPingPong.cpp Tue Aug 08 08:49:06 2017 +0000 @@ -101,7 +101,7 @@ { #if( defined ( TARGET_KL25Z ) || defined ( TARGET_LPC11U6X ) ) DigitalOut *led = new DigitalOut(LED2); -#elif defined(TARGET_NUCLEO_L073RZ) +#elif defined(TARGET_NUCLEO_L073RZ) || defined(TARGET_DISCO_L072CZ_LRWAN1) DigitalOut *led = new DigitalOut(LED4); // RX red led3 = new DigitalOut(LED3); // TX blue #else
--- a/main.cpp Tue Jul 11 11:37:03 2017 +0000 +++ b/main.cpp Tue Aug 08 08:49:06 2017 +0000 @@ -9,67 +9,20 @@ * IMPORTANT NOTE * Use the Nucleo-L073RZ target for the STM B_L072Z_LRWAN1 LoRa board */ -DigitalOut myled(LED1); +DigitalOut myled(LED2); BufferedSerial *ser; int main() { - SystemClock_Config(); ser = new BufferedSerial(USBTX, USBRX); ser->baud(115200*2); ser->format(8); ser->printf("Hello World\n\r"); myled = 1; - + SX1276PingPong(); } - - -void SystemClock_Config(void) -{ -#ifdef B_L072Z_LRWAN1_LORA - /* - * The L072Z_LRWAN1_LORA clock setup is somewhat differnt from the Nucleo board. - * It has no LSE. - */ - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - - /* Enable HSE Oscillator and Activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSEState = RCC_HSE_OFF; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_6; - RCC_OscInitStruct.PLL.PLLDIV = RCC_PLLDIV_3; - - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // Error_Handler(); - } - - /* Set Voltage scale1 as MCU will run at 32MHz */ - __HAL_RCC_PWR_CLK_ENABLE(); - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */ - while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {}; - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { - // Error_Handler(); - } -#endif -} - void dump(const char *title, const void *data, int len, bool dwords) { dprintf("dump(\"%s\", 0x%x, %d bytes)", title, data, len);
--- a/mbed.bld Tue Jul 11 11:37:03 2017 +0000 +++ b/mbed.bld Tue Aug 08 08:49:06 2017 +0000 @@ -1,1 +1,1 @@ -https://mbed.org/users/mbed_official/code/mbed/builds/64910690c574 \ No newline at end of file +https://mbed.org/users/mbed_official/code/mbed/builds/fd96258d940d \ No newline at end of file