This first part of the tour will focus on the wireless communication. At the end of this section will be a few notes on other interesting aspects of the code: the messaging system, and the manual configuration of the ADC module.

Wireless Communication and the WebSocket Client¶

Looking at the file structure of the IoT_Ex project, you can easily identify the two libraries necessary for the wireless communication: WiflyInterface and WebSocketClient. These two libraries were developed by other mbed users, and I have modified them slightly to improve their performance. I will not be going into detail on how they work, but on how they are being used for this project.

As shown in Figure 1, below, the Main Program interfaces with the “high level” WebSocket Client. Once a connection is established, the main program simply needs to call either ws.send() or ws.readmsg() to send or receive data from the server. After anyone of those function calls, the data goes through the WiFly Interface, then the UART module, then the physical wires to the RN-171 module. All of these lower level layers of code and hardware ensure everything is sent at the right time, and errors do not occur in the transmission, etc.

The next two subsections will parse through some of the important parts of main.cpp and globals.cpp that enable the wireless communication using the WebSocket Client and the WiFly Interface. I will also point out the areas of the code which you can modify to send and receive different types of data.

main.cpp¶

49   // Main Loop!
50   int main() {

The int main(){…} function is where most of the action takes place, so let’s take some time to parse through it. The first part of the function has some standard declarations, and variable configurations. Lines 74 and 78 is some of the first communications code we find: