David Rimer
VC0706 driver for radio shack camera shield
Sample Code
#include "mbed.h"
#include "SDFileSystem.h"
#include "CameraShield.h"
#include <stdio.h>
unsigned char VC0706_rx_buffer[80];
SDFileSystem sd(PTE3, PTE1, PTE2, PTE4, "sd", PTE6, SDFileSystem::SWITCH_POS_NO, 25000000); // MOSI, MISO, SCLK, SSEL
CameraShield camera(PTC17, PTC16);
void CapturePhoto()
{
uint32_t frame_length = camera.VC0706_get_frame_buffer_length(); //get frame buffer length
uint32_t vc_frame_address = READ_DATA_BLOCK_NO;
FILE* camFile = fopen("/sd/temp.jpg", "w");
while(vc_frame_address<frame_length)
{
camera.VC0706_read_frame_buffer(vc_frame_address - READ_DATA_BLOCK_NO, READ_DATA_BLOCK_NO);
wait_ms(9);
//get the data with length=READ_DATA_BLOCK_NObytes
camera.buffer_read(VC0706_rx_buffer, 80);
// write data to temp.jpg
fwrite(VC0706_rx_buffer + 5, sizeof(char), READ_DATA_BLOCK_NO, camFile);
//read next READ_DATA_BLOCK_NO bytes from frame buffer
vc_frame_address = vc_frame_address + READ_DATA_BLOCK_NO;
}
// get the last data
vc_frame_address = vc_frame_address - READ_DATA_BLOCK_NO;
uint32_t last_data_length = frame_length - vc_frame_address;
camera.VC0706_read_frame_buffer(vc_frame_address, last_data_length);
wait_ms(9);
//get the data
camera.buffer_read(VC0706_rx_buffer, 80);
fwrite(VC0706_rx_buffer+5, sizeof(char), last_data_length, camFile);
fclose(camFile);
}
int main (void)
{
// Check to see if the file exists:
// if exists,delete the file:
sd.remove("/sd/temp.jpg");
camera.Init();
camera.VC0706_image_size(VC0706_640x480);
camera.ResumeVideo();
wait_ms(500);
while(1)
{
camera.ResumeVideo();
wait_ms(1000);
camera.TakeSnapShot();
CapturePhoto();
}
}
CameraShield.cpp
- Committer:
- davidr99
- Date:
- 2014-12-18
- Revision:
- 1:5cff9e627e06
- Parent:
- 0:e5fc19091502
File content as of revision 1:5cff9e627e06:
/*****************************************************************************************
** File: CameraShield.cpp **
** **
** For radio shack Camera Shield. **
** http://blog.radioshack.com/2013/01/radioshack-camera-shield-for-arduino-boards/ **
*****************************************************************************************/
#include "CameraShield.h"
CameraShield::CameraShield ( PinName tx, PinName rx, int speed ) : _serial(tx, rx)
{
_serial.baud(speed);
}
void CameraShield::Init()
{
VC0706_compression_ratio(63);
wait_ms(100);
VC0706_frame_control(3);
wait_ms(10);
}
void CameraShield::TakeSnapShot()
{
VC0706_frame_control(0);
wait_ms(10);
_serial.rxBufferFlush();
}
void CameraShield::ResumeVideo()
{
VC0706_frame_control(3);
wait_ms(10);
_serial.rxBufferFlush();
}
/*******************************************************************************
* Function Name : VC0706_reset
* Description : Reset VC0706
*
* Input : None
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_reset(void)
{
unsigned char tx_vcbuffer[4];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_RESET;
tx_vcbuffer[3]=0x00;
buffer_send(tx_vcbuffer, 4);
}
/*******************************************************************************
* Function Name : VC0706_get_version
* Description : Request version string from VC0706
*
* Input : None
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_get_version()
{
unsigned char tx_vcbuffer[4];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_GEN_VERSION;
tx_vcbuffer[3]=0x00;
buffer_send(tx_vcbuffer, 4);
}
/*******************************************************************************
* Function Name : VC0706_tv_out_control
* Description : stop or start TV output from VC0706
*
* Input : on=0 stop tv output
; : on=1 start tv output
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_tv_out_control(int on)
{
unsigned char tx_vcbuffer[5];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_TV_OUT_CTRL;
tx_vcbuffer[3]=0x01;
tx_vcbuffer[4]=on;
buffer_send(tx_vcbuffer, 5);
}
/*******************************************************************************
* Function Name : VC0706_osd_add_char
* Description : ADD OSD CHARACTERS TO CHANNELS(CHANNEL 1)
*
* Input : col : Display column
* ` row: Display Row
* osd_string : display string (max 14 characters)
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_osd_add_char(int col, int row, char * osd_string)
{
unsigned char tx_vcbuffer[80];
unsigned char col_row;
int string_length;
int i;
col&=0x0f;
row&=0x0f;
col_row=(unsigned char)(col<<4 | row);
string_length=strlen(osd_string);
if (string_length>14)
string_length=14; // max 14 osd characters
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_OSD_ADD_CHAR;
tx_vcbuffer[3]=string_length+2;
tx_vcbuffer[4]=string_length; // character number
tx_vcbuffer[5]=col_row;
for (i=0;i<string_length;i++)
{
tx_vcbuffer[i+6]=osd_string[i];
}
buffer_send(tx_vcbuffer, string_length+6);
}
/*******************************************************************************
* Function Name : VC0706_w_h_downsize
* Description : control width and height downsize attribute
*
* Input : scale_width = 0 1:1
* = 1 1:2
* = 2 1:4
* scale_height= 0 1:1
* = 1 1:2
* = 2 1:4
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_w_h_downsize(int scale_width, int scale_height)
{
int scale;
unsigned char tx_vcbuffer[5];
if (scale_width>=2) scale_width=2;
if (scale_height>scale_width) scale_height=scale_width;
scale=(unsigned char)(scale_height<<2 | scale_width);
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_DOWNSIZE_SIZE;
tx_vcbuffer[3]=0x01;
tx_vcbuffer[4]=scale; //bit[1:0] width zooming proportion
//bit[3:2] height zooming proportion
buffer_send(tx_vcbuffer, 5);
}
/*******************************************************************************
* Function Name : VC0706_read_frame_buffer
* Description : read image data from FBUF
*
* Input : buffer_address(4 bytes); buffer_length(4 bytes)
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_read_frame_buffer(unsigned long buffer_address, unsigned long buffer_length)
{
unsigned char tx_vcbuffer[16];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_READ_FBUF;
tx_vcbuffer[3]=0x0c;
tx_vcbuffer[4]=FBUF_CURRENT_FRAME;
tx_vcbuffer[5]=0x0a; // 0x0a=data transfer by MCU mode; 0x0f=data transfer by SPI interface
tx_vcbuffer[6]=buffer_address>>24; //starting address
tx_vcbuffer[7]=buffer_address>>16;
tx_vcbuffer[8]=buffer_address>>8;
tx_vcbuffer[9]=buffer_address&0x0ff;
tx_vcbuffer[10]=buffer_length>>24; // data length
tx_vcbuffer[11]=buffer_length>>16;
tx_vcbuffer[12]=buffer_length>>8;
tx_vcbuffer[13]=buffer_length&0x0ff;
tx_vcbuffer[14]=0x00; // delay time
tx_vcbuffer[15]=0x0a;
buffer_send(tx_vcbuffer, 16);
}
/*******************************************************************************
* Function Name : VC0706_get_frame_buffer_length
* Description : Get frame buffer length
*
* Input : None
* Output : Frame Length
* Return : None
*******************************************************************************/
uint32_t CameraShield::VC0706_get_frame_buffer_length()
{
unsigned char tx_vcbuffer[20];
uint32_t frame_length;
_serial.rxBufferFlush();
//get frame buffer length
VC0706_get_framebuffer_length(0);
wait_ms(10);
buffer_read(tx_vcbuffer, sizeof(tx_vcbuffer));
// store frame buffer length for coming reading
frame_length = (tx_vcbuffer[5]<<8) + tx_vcbuffer[6];
frame_length = frame_length << 16;
frame_length = frame_length + (0x0ff00 & (tx_vcbuffer[7]<<8)) + tx_vcbuffer[8];
return frame_length;
}
/*******************************************************************************
* Function Name : VC0706_frame_control
* Description : control frame buffer register
*
* Input : frame_control=control flag(1byte)
* : 0 = stop current frame ; 1= stop next frame;2=step frame;3 =resume frame;
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_frame_control(char frame_control)
{
unsigned char tx_vcbuffer[5];
if(frame_control>3)frame_control=3;
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_FBUF_CTRL;
tx_vcbuffer[3]=0x01;
tx_vcbuffer[4]=frame_control;
buffer_send(tx_vcbuffer, 5);
}
/*******************************************************************************
* Function Name : VC0706_motion_detection
* Description : get motion monitoring status in communication interface.
*
* Input : control_flag = 0 stop motion monitoring
* = 1 start motion monitoring
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_motion_detection(int control_flag)
{
unsigned char tx_vcbuffer[5];
if(control_flag>1)control_flag=1;
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_COMM_MOTION_CTRL;
tx_vcbuffer[3]=0x01;
tx_vcbuffer[4]=control_flag;
buffer_send(tx_vcbuffer, 5);
}
/*******************************************************************************
* Function Name : VC0706_motion_control
* Description : motion control
*
* Input : control_flag = 0 forbid motion monitoring
* = 1 enable motion monitoring
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_motion_control(int control_flag)
{
unsigned char tx_vcbuffer[7];
if(control_flag>1)control_flag=1;
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_MOTION_CTRL;
tx_vcbuffer[3]=0x03;
tx_vcbuffer[4]=0x00; //motion control attribute
tx_vcbuffer[5]=0x01; //mcu uart control
tx_vcbuffer[6]=control_flag;
buffer_send(tx_vcbuffer, 7);
}
/*******************************************************************************
* Function Name : VC0706_get_framebuffer_length
* Description : get byte-lengths in FBUF
*
* Input : fbuf_type =current or next frame
* 0 = current frame
* 1 = next frame
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_get_framebuffer_length(char fbuf_type)
{
unsigned char tx_vcbuffer[5];
if(fbuf_type>1)fbuf_type=1;
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_GET_FBUF_LEN;
tx_vcbuffer[3]=0x01;
tx_vcbuffer[4]=fbuf_type;
buffer_send(tx_vcbuffer, 5);
}
/*******************************************************************************
* Function Name : VC0706_uart_power_save
* Description : stop current frame for reading
*
* Input : power_on =1 start power-save
* = 0 stop power-save
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_uart_power_save(char power_save_on)
{
unsigned char tx_vcbuffer[7];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_POWER_SAVE_CTRL;
tx_vcbuffer[3]=0x03;
tx_vcbuffer[4]=00; //power save control mode
tx_vcbuffer[5]=01; // control by UART
tx_vcbuffer[6]=power_save_on; //start power save
buffer_send(tx_vcbuffer, 7);
}
/*******************************************************************************
* Function Name : VC0706_uart_color_control
* Description : stop current frame for reading
*
* Input : show_mode = 0 automatically step black-white and colour
* 1 manually step color, select colour
* 2 manually step color, select black-white
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_uart_color_control(char show_mode)
{
unsigned char tx_vcbuffer[6];
if(show_mode>2) show_mode=2;
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_COLOR_CTRL;
tx_vcbuffer[3]=0x02;
tx_vcbuffer[4]=01; //control by UART
tx_vcbuffer[5]=show_mode; // automatically step black-white and colour
buffer_send(tx_vcbuffer, 6);
}
/*******************************************************************************
* Function Name : VC0706_image_size
* Description : resizing the image
*
* Input : VC0706_640x480
* VC0706_320x240
* VC0706_160x120
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_image_size(int ratio)
{
unsigned char tx_vcbuffer[9];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_WRITE_DATA;
tx_vcbuffer[3]=0x05;
tx_vcbuffer[4]=0x04;
tx_vcbuffer[5]=0x01;
tx_vcbuffer[6]=0x00;
tx_vcbuffer[7]=0x19;
tx_vcbuffer[8]=ratio; //data
buffer_send(tx_vcbuffer, 9);
}
/*******************************************************************************
* Function Name : VC0706_compression_ratio
* Description : stop current frame for reading
*
* Input : ration >13(minimum)
* <63(max)
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_compression_ratio(int ratio)
{
unsigned char tx_vcbuffer[9];
if(ratio>63)ratio=63;
if(ratio<13)ratio=13;
int vc_comp_ratio=(ratio-13)*4+53;
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_WRITE_DATA;
tx_vcbuffer[3]=0x05;
tx_vcbuffer[4]=01; //chip register
tx_vcbuffer[5]=0x01; //data num ready to write
tx_vcbuffer[6]=0x12; //register address
tx_vcbuffer[7]=0x04;
tx_vcbuffer[8]=vc_comp_ratio; //data
buffer_send(tx_vcbuffer, 9);
}
/*******************************************************************************
* Function Name : VC0706_motion_windows_setting
* Description : motion windows setting
*
* Input : register_address(2 bytes);
* data(4 bytes)= data ready to write
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::VC0706_motion_windows_setting(unsigned int register_address, unsigned long data)
{
unsigned char tx_vcbuffer[12];
tx_vcbuffer[0]=VC0706_PROTOCOL_SIGN;
tx_vcbuffer[1]=VC0706_SERIAL_NUMBER;
tx_vcbuffer[2]=VC0706_COMMAND_WRITE_DATA;
tx_vcbuffer[3]=0x08;
tx_vcbuffer[4]=01; //chip register
tx_vcbuffer[5]=0x04; //data num ready to write
tx_vcbuffer[6]=register_address>>8; //register address
tx_vcbuffer[7]=register_address&0x0ff;;
tx_vcbuffer[8]=data>>24; // data ready to write
tx_vcbuffer[9]=data>>16;
tx_vcbuffer[10]=data>>8;
tx_vcbuffer[11]=data&0x0ff;
buffer_send(tx_vcbuffer, 12);
}
/*******************************************************************************
* Function Name : buffer_send
* Description : Transmit buffer to VC0706
*
* Input : buff pointer
* : buffer length
*
* Output : None
* Return : None
*******************************************************************************/
void CameraShield::buffer_send(unsigned char *buff, int buffSize)
{
int i=0;
for (i=0;i<buffSize;i++)
_serial.putc(buff[i]);
// Wait for buffer to send
while(_serial.txIsBusy())
{
wait_us(1);
}
}
/*******************************************************************************
* Function Name : buffer_read
* Description : Receive buffer from VC0706
*
* Input : buffer pointer
* : buffer size
*
* Output : length of buffer read
* Return : None
*******************************************************************************/
int CameraShield::buffer_read(unsigned char *buff, int buffSize)
{
bool validity=true;
int rx_counter = 0;
buff[0]=0;
while (_serial.readable() > 0 && rx_counter < buffSize)
{
buff[rx_counter++]= _serial.getc();
}
if (buff[0]!=0x76)
validity=false;
if (buff[1]!=VC0706_SERIAL_NUMBER)
validity=false;
if (validity)
return 0;
return rx_counter;
}