David Rimer / RadioHead-148

Port of RadioHead version 1.48 to mbed. It is a little messy and only works for SPI at this time.

RHSPIDriver.h@0:ab4e012489ef, 2015-10-15 (annotated)

Committer:
davidr99
Date:
Thu Oct 15 01:27:00 2015 +0000
Revision:
0:ab4e012489ef
Messy start, but a port for RadioHead.; Currently the SPI modulus are the only ones that work.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
davidr99 0:ab4e012489ef 1 // RHSPIDriver.h
davidr99 0:ab4e012489ef 2 // Author: Mike McCauley (mikem@airspayce.com)
davidr99 0:ab4e012489ef 3 // Copyright (C) 2014 Mike McCauley
davidr99 0:ab4e012489ef 4 // $Id: RHSPIDriver.h,v 1.9 2014/04/23 06:00:59 mikem Exp $
davidr99 0:ab4e012489ef 5
davidr99 0:ab4e012489ef 6 #ifndef RHSPIDriver_h
davidr99 0:ab4e012489ef 7 #define RHSPIDriver_h
davidr99 0:ab4e012489ef 8
davidr99 0:ab4e012489ef 9 #include <RHGenericDriver.h>
davidr99 0:ab4e012489ef 10 #include <RHHardwareSPI.h>
davidr99 0:ab4e012489ef 11
davidr99 0:ab4e012489ef 12 // This is the bit in the SPI address that marks it as a write
davidr99 0:ab4e012489ef 13 #define RH_SPI_WRITE_MASK 0x80
davidr99 0:ab4e012489ef 14
davidr99 0:ab4e012489ef 15 class RHGenericSPI;
davidr99 0:ab4e012489ef 16
davidr99 0:ab4e012489ef 17 /////////////////////////////////////////////////////////////////////
davidr99 0:ab4e012489ef 18 /// \class RHSPIDriver RHSPIDriver.h <RHSPIDriver.h>
davidr99 0:ab4e012489ef 19 /// \brief Base class for a RadioHead drivers that use the SPI bus
davidr99 0:ab4e012489ef 20 /// to communicate with its transport hardware.
davidr99 0:ab4e012489ef 21 ///
davidr99 0:ab4e012489ef 22 /// This class can be subclassed by Drivers that require to use the SPI bus.
davidr99 0:ab4e012489ef 23 /// It can be configured to use either the RHHardwareSPI class (if there is one available on the platform)
davidr99 0:ab4e012489ef 24 /// of the bitbanged RHSoftwareSPI class. The default behaviour is to use a pre-instantiated built-in RHHardwareSPI
davidr99 0:ab4e012489ef 25 /// interface.
davidr99 0:ab4e012489ef 26 ///
davidr99 0:ab4e012489ef 27 /// SPI bus access is protected by ATOMIC_BLOCK_START and ATOMIC_BLOCK_END, which will ensure interrupts
davidr99 0:ab4e012489ef 28 /// are disabled during access.
davidr99 0:ab4e012489ef 29 ///
davidr99 0:ab4e012489ef 30 /// The read and write routines implement commonly used SPI conventions: specifically that the MSB
davidr99 0:ab4e012489ef 31 /// of the first byte transmitted indicates that it is a write and the remaining bits indicate the rehgister to access)
davidr99 0:ab4e012489ef 32 /// This can be overriden
davidr99 0:ab4e012489ef 33 /// in subclasses if necessaryor an alternative class, RHNRFSPIDriver can be used to access devices like
davidr99 0:ab4e012489ef 34 /// Nordic NRF series radios, which have different requirements.
davidr99 0:ab4e012489ef 35 ///
davidr99 0:ab4e012489ef 36 /// Application developers are not expected to instantiate this class directly:
davidr99 0:ab4e012489ef 37 /// it is for the use of Driver developers.
davidr99 0:ab4e012489ef 38 class RHSPIDriver : public RHGenericDriver
davidr99 0:ab4e012489ef 39 {
davidr99 0:ab4e012489ef 40 public:
davidr99 0:ab4e012489ef 41 /// Constructor
davidr99 0:ab4e012489ef 42 /// \param[in] slaveSelectPin The controler pin to use to select the desired SPI device. This pin will be driven LOW
davidr99 0:ab4e012489ef 43 /// during SPI communications with the SPI device that uis iused by this Driver.
davidr99 0:ab4e012489ef 44 /// \param[in] spi Reference to the SPI interface to use. The default is to use a default built-in Hardware interface.
davidr99 0:ab4e012489ef 45 RHSPIDriver(PINS slaveSelectPin, RHGenericSPI& spi = hardware_spi);
davidr99 0:ab4e012489ef 46
davidr99 0:ab4e012489ef 47 /// Initialise the Driver transport hardware and software.
davidr99 0:ab4e012489ef 48 /// Make sure the Driver is properly configured before calling init().
davidr99 0:ab4e012489ef 49 /// \return true if initialisation succeeded.
davidr99 0:ab4e012489ef 50 bool init();
davidr99 0:ab4e012489ef 51
davidr99 0:ab4e012489ef 52 /// Reads a single register from the SPI device
davidr99 0:ab4e012489ef 53 /// \param[in] reg Register number
davidr99 0:ab4e012489ef 54 /// \return The value of the register
davidr99 0:ab4e012489ef 55 uint8_t spiRead(uint8_t reg);
davidr99 0:ab4e012489ef 56
davidr99 0:ab4e012489ef 57 /// Writes a single byte to the SPI device
davidr99 0:ab4e012489ef 58 /// \param[in] reg Register number
davidr99 0:ab4e012489ef 59 /// \param[in] val The value to write
davidr99 0:ab4e012489ef 60 /// \return Some devices return a status byte during the first data transfer. This byte is returned.
davidr99 0:ab4e012489ef 61 /// it may or may not be meaningfule depending on the the type of device being accessed.
davidr99 0:ab4e012489ef 62 uint8_t spiWrite(uint8_t reg, uint8_t val);
davidr99 0:ab4e012489ef 63
davidr99 0:ab4e012489ef 64 /// Reads a number of consecutive registers from the SPI device using burst read mode
davidr99 0:ab4e012489ef 65 /// \param[in] reg Register number of the first register
davidr99 0:ab4e012489ef 66 /// \param[in] dest Array to write the register values to. Must be at least len bytes
davidr99 0:ab4e012489ef 67 /// \param[in] len Number of bytes to read
davidr99 0:ab4e012489ef 68 /// \return Some devices return a status byte during the first data transfer. This byte is returned.
davidr99 0:ab4e012489ef 69 /// it may or may not be meaningfule depending on the the type of device being accessed.
davidr99 0:ab4e012489ef 70 uint8_t spiBurstRead(uint8_t reg, uint8_t* dest, uint8_t len);
davidr99 0:ab4e012489ef 71
davidr99 0:ab4e012489ef 72 /// Write a number of consecutive registers using burst write mode
davidr99 0:ab4e012489ef 73 /// \param[in] reg Register number of the first register
davidr99 0:ab4e012489ef 74 /// \param[in] src Array of new register values to write. Must be at least len bytes
davidr99 0:ab4e012489ef 75 /// \param[in] len Number of bytes to write
davidr99 0:ab4e012489ef 76 /// \return Some devices return a status byte during the first data transfer. This byte is returned.
davidr99 0:ab4e012489ef 77 /// it may or may not be meaningfule depending on the the type of device being accessed.
davidr99 0:ab4e012489ef 78 uint8_t spiBurstWrite(uint8_t reg, const uint8_t* src, uint8_t len);
davidr99 0:ab4e012489ef 79
davidr99 0:ab4e012489ef 80 protected:
davidr99 0:ab4e012489ef 81 /// Reference to the RHGenericSPI instance to use to trasnfer data with teh SPI device
davidr99 0:ab4e012489ef 82 RHGenericSPI& _spi;
davidr99 0:ab4e012489ef 83
davidr99 0:ab4e012489ef 84 /// The pin number of the Slave Selct pin that is used to select the desired device.
davidr99 0:ab4e012489ef 85 #if (RH_PLATFORM == RH_PLATFORM_MBED)
davidr99 0:ab4e012489ef 86 DigitalOut _slaveSelectPin;
davidr99 0:ab4e012489ef 87 #else
davidr99 0:ab4e012489ef 88 uint8_t _slaveSelectPin;
davidr99 0:ab4e012489ef 89 #endif
davidr99 0:ab4e012489ef 90 };
davidr99 0:ab4e012489ef 91
davidr99 0:ab4e012489ef 92 #endif