David Prentice
MCUFRIEND_kbv library for MBED depends on ADA_GFX_kbv library
Dependents: TFT_Touch_botao_v1 TFT_Touch_exemplo5_git_touch TESTE_1 TFT_Touch_exemplo6_git_touch_button_3_ ... more
utility/pin_shield_1.h
- Committer:
- davidprentice
- Date:
- 2021-05-14
- Revision:
- 3:47aa91940108
- Parent:
- 1:06c4b34a5a61
File content as of revision 3:47aa91940108:
#ifndef PIN_SHIELD_1_H_
#define PIN_SHIELD_1_H_
// just provide macros for the Arduino pins
// i.e. PIN_LOW(), PIN_HIGH(), PIN_OUTPUT(), PIN_INPUT(), PIN_READ()
#define LPC810 810
#define LPC812 812
#define LPC1343 1343
#define LPC1768 1768
#define LPC2103 2103
#define LPC2148 2148
#define ISTARGET_NUCLEO64 (0 \
|| defined(TARGET_NUCLEO_F072RB) \
|| defined(TARGET_NUCLEO_F103RB) \
|| defined(TARGET_NUCLEO_F401RE) \
|| defined(TARGET_NUCLEO_F411RE) \
|| defined(TARGET_NUCLEO_F446RE) \
|| defined(TARGET_NUCLEO_L433RC_P) \
|| defined(TARGET_NUCLEO_L476RG) \
)
#define ISTARGET_NUCLEO144 (0 \
|| defined(TARGET_NUCLEO_F767ZI) \
)
//#warning Using pin_SHIELD_1.h
#if 0
#elif defined(MY_BLUEPILL)
#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
#if defined(__CC_ARM)
#include <STM32F10X.h>
#else
#include <STM32F1XX.h>
#endif
#define D0_PORT GPIOB
#define D0_PIN 11
#define D1_PORT GPIOB
#define D1_PIN 10
#define D2_PORT GPIOB
#define D2_PIN 6
#define D3_PORT GPIOB
#define D3_PIN 7
#define D4_PORT GPIOA
#define D4_PIN 0
#define D5_PORT GPIOA
#define D5_PIN 1
#define D6_PORT GPIOA
#define D6_PIN 2
#define D7_PORT GPIOA
#define D7_PIN 3
#define D8_PORT GPIOA
#define D8_PIN 9
#define D9_PORT GPIOA
#define D9_PIN 10
#define D10_PORT GPIOB
#define D10_PIN 12
#define D11_PORT GPIOB
#define D11_PIN 15
#define D12_PORT GPIOB
#define D12_PIN 14
#define D13_PORT GPIOB
#define D13_PIN 13
#define A0_PORT GPIOB
#define A0_PIN 1
#define A1_PORT GPIOB
#define A1_PIN 0
#define A2_PORT GPIOA
#define A2_PIN 7
#define A3_PORT GPIOA
#define A3_PIN 6
#define A4_PORT GPIOA
#define A4_PIN 5
#define A5_PORT GPIOB
#define A5_PIN 4
// Shield Control macros
#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
#define PIN_OUTPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x3); else PIN_MODE4((port)->CRL, pin, 0x3); } //50MHz push-pull only 0-7
#define PIN_INPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x4); else PIN_MODE4((port)->CRL, pin, 0x4); } //input
#elif defined(BLUEPILL)
#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
#if defined(__CC_ARM)
#include <STM32F10X.h>
#else
#include <STM32F1XX.h>
#endif
#define D0_PORT GPIOA
#define D0_PIN 10
#define D1_PORT GPIOA
#define D1_PIN 9
#define D2_PORT GPIOA
#define D2_PIN 2
#define D3_PORT GPIOA
#define D3_PIN 3
#define D4_PORT GPIOA
#define D4_PIN 4
#define D5_PORT GPIOA
#define D5_PIN 5
#define D6_PORT GPIOA
#define D6_PIN 6
#define D7_PORT GPIOA
#define D7_PIN 7
#define D8_PORT GPIOA
#define D8_PIN 0
#define D9_PORT GPIOA
#define D9_PIN 1
#define D10_PORT GPIOA
#define D10_PIN 15
#define D11_PORT GPIOB
#define D11_PIN 5
#define D12_PORT GPIOB
#define D12_PIN 4
#define D13_PORT GPIOB
#define D13_PIN 3
#define A0_PORT GPIOB
// #define A0_PIN 5 //original pcb uses SPI pin
#define A0_PIN 0 //hardware mod to Adapter to PB0. Allows use of PB5 for SD Card
#define A1_PORT GPIOB
#define A1_PIN 6
#define A2_PORT GPIOB
#define A2_PIN 7
#define A3_PORT GPIOB
#define A3_PIN 8
#define A4_PORT GPIOB
#define A4_PIN 9
#define A5_PORT GPIOB
#define A5_PIN 10
// Shield Control macros
#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
#define PIN_OUTPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x3); else PIN_MODE4((port)->CRL, pin, 0x3); } //50MHz push-pull only 0-7
#define PIN_INPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x4); else PIN_MODE4((port)->CRL, pin, 0x4); } //input
#elif defined(ITEADMAPLE)
#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
#if defined(__CC_ARM)
#include <STM32F10X.h>
#else
#include <STM32F1XX.h>
#endif
#define D0_PORT GPIOA
#define D0_PIN 3
#define D1_PORT GPIOA
#define D1_PIN 2
#define D2_PORT GPIOA
#define D2_PIN 0
#define D3_PORT GPIOA
#define D3_PIN 1
#define D4_PORT GPIOB
#define D4_PIN 5
#define D5_PORT GPIOB
#define D5_PIN 6
#define D6_PORT GPIOA
#define D6_PIN 8
#define D7_PORT GPIOA
#define D7_PIN 9
#define D8_PORT GPIOA
#define D8_PIN 10
#define D9_PORT GPIOB
#define D9_PIN 7
#define D10_PORT GPIOA
#define D10_PIN 4
#define D11_PORT GPIOA
#define D11_PIN 7
#define D12_PORT GPIOA
#define D12_PIN 6
#define D13_PORT GPIOA
#define D13_PIN 5
#define A0_PORT GPIOC
#define A0_PIN 0
#define A1_PORT GPIOC
#define A1_PIN 1
#define A2_PORT GPIOC
#define A2_PIN 2
#define A3_PORT GPIOC
#define A3_PIN 3
#define A4_PORT GPIOC
#define A4_PIN 4
#define A5_PORT GPIOC
#define A5_PIN 5
// Shield Control macros
#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
#define PIN_OUTPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x3); else PIN_MODE4((port)->CRL, pin, 0x3); } //50MHz push-pull only 0-7
#define PIN_INPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x4); else PIN_MODE4((port)->CRL, pin, 0x4); } //input
#elif defined(NUCLEO144) || ISTARGET_NUCLEO144
#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
#if __MBED__
#warning MBED knows everything
#elif defined(STM32F767xx)
#include <STM32F7XX.h>
#endif
#define D0_PORT GPIOG
#define D0_PIN 9
#define D1_PORT GPIOG
#define D1_PIN 14
#define D2_PORT GPIOF
#define D2_PIN 15
#define D3_PORT GPIOE
#define D3_PIN 13
#define D4_PORT GPIOF
#define D4_PIN 14
#define D5_PORT GPIOE
#define D5_PIN 11
#define D6_PORT GPIOE
#define D6_PIN 9
#define D7_PORT GPIOF
#define D7_PIN 13
#define D8_PORT GPIOF
#define D8_PIN 12
#define D9_PORT GPIOD
#define D9_PIN 15
#define D10_PORT GPIOD
#define D10_PIN 14
#define D11_PORT GPIOA
#define D11_PIN 7
#define D12_PORT GPIOA
#define D12_PIN 6
#define D13_PORT GPIOA
#define D13_PIN 5
#define A0_PORT GPIOA
#define A0_PIN 3
#define A1_PORT GPIOC
#define A1_PIN 0
#define A2_PORT GPIOC
#define A2_PIN 3
#define A3_PORT GPIOF
#define A3_PIN 3
#define A4_PORT GPIOF
#define A4_PIN 5
#define A5_PORT GPIOF
#define A5_PIN 10
// Shield Control macros
#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
//#define PIN_LOW(port, pin) (port)->ODR &= ~(1<<(pin))
//#define PIN_HIGH(port, pin) (port)->ODR |= (1<<(pin))
#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
#define PIN_OUTPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x1)
#define PIN_INPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x0) //.kbv check this
#elif defined(NUCLEO) || ISTARGET_NUCLEO64
#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
#if __MBED__
#warning MBED knows everything
#elif defined(STM32F072xB)
#include <STM32F0XX.h>
#elif defined(STM32F103xB)
#if defined(__CC_ARM)
#include <STM32F10X.h>
#else
#include <STM32F1XX.h>
#endif
#elif defined(STM32L476xx) || defined(STM32L433xx)
#include <STM32L4XX.h>
#elif defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
#include <STM32F4XX.h>
#endif
#define D0_PORT GPIOA
#define D0_PIN 3
#define D1_PORT GPIOA
#define D1_PIN 2
#define D2_PORT GPIOA
#define D2_PIN 10
#define D3_PORT GPIOB
#define D3_PIN 3
#define D4_PORT GPIOB
#define D4_PIN 5
#define D5_PORT GPIOB
#define D5_PIN 4
#define D6_PORT GPIOB
#define D6_PIN 10
#define D7_PORT GPIOA
#define D7_PIN 8
#define D8_PORT GPIOA
#define D8_PIN 9
#define D9_PORT GPIOC
#define D9_PIN 7
#define D10_PORT GPIOB
#define D10_PIN 6
#define D11_PORT GPIOA
#define D11_PIN 7
#define D12_PORT GPIOA
#define D12_PIN 6
#define D13_PORT GPIOA
#define D13_PIN 5
#define A0_PORT GPIOA
#define A0_PIN 0
#define A1_PORT GPIOA
#define A1_PIN 1
#define A2_PORT GPIOA
#define A2_PIN 4
#define A3_PORT GPIOB
#define A3_PIN 0
#define A4_PORT GPIOC
#define A4_PIN 1
#define A5_PORT GPIOC
#define A5_PIN 0
// Shield Control macros
#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
//#define PIN_LOW(port, pin) (port)->ODR &= ~(1<<(pin))
//#define PIN_HIGH(port, pin) (port)->ODR |= (1<<(pin))
#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
#if defined(STM32F103xB)
#warning STM32F103xB ******************************
#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
#define PIN_OUTPUT(port, pin) PIN_MODE4((port)->CRL, pin, 0x3) //50MHz push-pull only 0-7
#define PIN_INPUT(port, pin) PIN_MODE4((port)->CRL, pin, 0x4) //digital input
#else
#define PIN_OUTPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x1)
#define PIN_INPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x0) //.kbv check this
#endif
#elif __TARGET_PROCESSOR == LPC1768 || defined(TARGET_LPC1768)
#include <LPC17xx.h>
// configure macros for the control pins
#define D0_PORT LPC_GPIO0
#define D0_PIN 3
#define D1_PORT LPC_GPIO0
#define D1_PIN 2
#define D2_PORT LPC_GPIO0
#define D2_PIN 24 //p16
#define D3_PORT LPC_GPIO0
#define D3_PIN 23 //p15
#define D4_PORT LPC_GPIO0
#define D4_PIN 16 //p14
#define D5_PORT LPC_GPIO0
#define D5_PIN 15 //p13
#define D6_PORT LPC_GPIO0
#define D6_PIN 17 //p12
#define D7_PORT LPC_GPIO0
#define D7_PIN 18 //p11
#define D8_PORT LPC_GPIO0
#define D8_PIN 1 //p10
#define D9_PORT LPC_GPIO0
#define D9_PIN 0 //p9
#define D10_PORT LPC_GPIO0
#define D10_PIN 6 //p8
#define D11_PORT LPC_GPIO0
#define D11_PIN 9 //p5
#define D12_PORT LPC_GPIO0
#define D12_PIN 8 //p6 miso
#define D13_PORT LPC_GPIO0
#define D13_PIN 7 //p7
#define A0_PORT LPC_GPIO0
#define A0_PIN 25 //p17
#define A1_PORT LPC_GPIO0
#define A1_PIN 26 //p18
#define A2_PORT LPC_GPIO1
#define A2_PIN 30 //p19
#define A3_PORT LPC_GPIO1
#define A3_PIN 31 //p20
#define A4_PORT LPC_GPIO0
#define A4_PIN 10 //p28
#define A5_PORT LPC_GP100
#define A5_PIN 11 //p27
// Shield Control macros
#define PIN_LOW(port, pin) (port)->FIOCLR = (1u<<(pin))
#define PIN_HIGH(port, pin) (port)->FIOSET = (1u<<(pin))
#define PIN_OUTPUT(port, pin) (port)->FIODIR |= (1u<<(pin))
#define PIN_INPUT(port, pin) (port)->FIODIR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->FIOPIN & (1u<<(pin))
#elif (defined(MK20D7) && defined(TEENSY)) || defined(TARGET_TEENSY3_1)
#if __MBED__
#warning MBED knows everything
#else
#include <MK20D5.h>
#endif
#define D0_PORT PTB
#define D0_PIN 16
#define D1_PORT PTB
#define D1_PIN 17
#define D2_PORT PTD
#define D2_PIN 0
#define D3_PORT PTA
#define D3_PIN 12
#define D4_PORT PTA
#define D4_PIN 13
#define D5_PORT PTD
#define D5_PIN 7
#define D6_PORT PTD
#define D6_PIN 4
#define D7_PORT PTD
#define D7_PIN 2
#define D8_PORT PTD
#define D8_PIN 3
#define D9_PORT PTC
#define D9_PIN 3
#define D10_PORT PTC
#define D10_PIN 4
#define D11_PORT PTC
#define D11_PIN 6
#define D12_PORT PTC
#define D12_PIN 7
#define D13_PORT PTC
#define D13_PIN 5
#define A0_PORT PTD
#define A0_PIN 1
#define A1_PORT PTC
#define A1_PIN 0
#define A2_PORT PTB
#define A2_PIN 0
#define A3_PORT PTB
#define A3_PIN 1
#define A4_PORT PTB
#define A4_PIN 3
#define A5_PORT PTB
#define A5_PIN 2
// Shield Control macros. Deliberately avoid the IOSET registers
#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
#elif defined(MKL25Z4) || defined(TARGET_KL25Z)
#include <MKL25Z4.h>
#define D0_PORT PTA
#define D0_PIN 1
#define D1_PORT PTA
#define D1_PIN 2
#define D2_PORT PTD
#define D2_PIN 4
#define D3_PORT PTA
#define D3_PIN 12
#define D4_PORT PTA
#define D4_PIN 4
#define D5_PORT PTA
#define D5_PIN 5
#define D6_PORT PTC
#define D6_PIN 8
#define D7_PORT PTC
#define D7_PIN 9
#define D8_PORT PTA
#define D8_PIN 13
#define D9_PORT PTD
#define D9_PIN 5
#define D10_PORT PTD
#define D10_PIN 0
#define D11_PORT PTD
#define D11_PIN 2
#define D12_PORT PTD
#define D12_PIN 3
#define D13_PORT PTD
#define D13_PIN 1
#define A0_PORT PTB
#define A0_PIN 0
#define A1_PORT PTB
#define A1_PIN 1
#define A2_PORT PTB
#define A2_PIN 2
#define A3_PORT PTB
#define A3_PIN 3
#define A4_PORT PTC
#define A4_PIN 2
#define A5_PORT PTC
#define A5_PIN 1
// Shield Control macros. Deliberately avoid the IOSET registers
#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
#elif defined(MKL26Z4)
#include <MKL26Z4.h>
#define D0_PORT PTA
#define D0_PIN 1
#define D1_PORT PTA
#define D1_PIN 2
#define D2_PORT PTD
#define D2_PIN 3 //PTD4 on KL25
#define D3_PORT PTA
#define D3_PIN 12
#define D4_PORT PTA
#define D4_PIN 4
#define D5_PORT PTA
#define D5_PIN 5
#define D6_PORT PTC
#define D6_PIN 8
#define D7_PORT PTC
#define D7_PIN 9
#define D8_PORT PTA
#define D8_PIN 13
#define D9_PORT PTD
#define D9_PIN 2 //PTD5 on KL25
#define D10_PORT PTD
#define D10_PIN 4 //PTD0
#define D11_PORT PTD
#define D11_PIN 6 //PTD2
#define D12_PORT PTD
#define D12_PIN 7 //PTD3
#define D13_PORT PTD
#define D13_PIN 5 //PTD1
#define A0_PORT PTB
#define A0_PIN 0
#define A1_PORT PTB
#define A1_PIN 1
#define A2_PORT PTB
#define A2_PIN 2
#define A3_PORT PTB
#define A3_PIN 3
#define A4_PORT PTC
#define A4_PIN 2
#define A5_PORT PTC
#define A5_PIN 1
// Shield Control macros. Deliberately avoid the IOSET registers
#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
#elif defined(MKL05Z4) || defined(TARGET_KL05Z)
#include <MKL05Z4.h>
#define D0_PORT PTB
#define D0_PIN 2
#define D1_PORT PTB
#define D1_PIN 1
#define D2_PORT PTA
#define D2_PIN 11
#define D3_PORT PTB
#define D3_PIN 5
#define D4_PORT PTA
#define D4_PIN 10
#define D5_PORT PTA
#define D5_PIN 12
#define D6_PORT PTB
#define D6_PIN 6
#define D7_PORT PTB
#define D7_PIN 7
#define D8_PORT PTB
#define D8_PIN 13
#define D9_PORT PTB
#define D9_PIN 5
#define D10_PORT PTA
#define D10_PIN 0
#define D11_PORT PTA
#define D11_PIN 2
#define D12_PORT PTA
#define D12_PIN 3
#define D13_PORT PTB
#define D13_PIN 1
#define A0_PORT PTB
#define A0_PIN 8
#define A1_PORT PTB
#define A1_PIN 9
#define A2_PORT PTA
#define A2_PIN 8
#define A3_PORT PTA
#define A3_PIN 0
#define A4_PORT PTA
#define A4_PIN 9
#define A5_PORT PTB
#define A5_PIN 13
// Shield Control macros
//#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
//#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
#elif defined(MK20D5) || defined(TARGET_K20D50M)
#include <MK20D5.h>
#define D0_PORT PTE
#define D0_PIN 1
#define D1_PORT PTE
#define D1_PIN 0
#define D2_PORT PTA
#define D2_PIN 5
#define D3_PORT PTD
#define D3_PIN 4
#define D4_PORT PTC
#define D4_PIN 8
#define D5_PORT PTA
#define D5_PIN 1
#define D6_PORT PTC
#define D6_PIN 3
#define D7_PORT PTC
#define D7_PIN 4
#define D8_PORT PTA
#define D8_PIN 12
#define D9_PORT PTA
#define D9_PIN 2
#define D10_PORT PTC
#define D10_PIN 2
#define D11_PORT PTD
#define D11_PIN 2
#define D12_PORT PTD
#define D12_PIN 3
#define D13_PORT PTD
#define D13_PIN 1
#define A0_PORT PTC
#define A0_PIN 0
#define A1_PORT PTC
#define A1_PIN 1
#define A2_PORT PTD
#define A2_PIN 6
#define A3_PORT PTD
#define A3_PIN 5
#define A4_PORT PTB
#define A4_PIN 1
#define A5_PORT PTB
#define A5_PIN 0
// Shield Control macros. Deliberately avoid the IOSET registers
#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
#elif defined(ZERO)
#include <samd21.h>
// configure macros for the data pins
#if defined(D21_XPRO)
#define D0_PORT PORT->Group[1]
#define D0_PIN 9
#define D1_PORT PORT->Group[1]
#define D1_PIN 8
#define D2_PORT PORT->Group[1]
#define D2_PIN 14
#define D3_PORT PORT->Group[1]
#define D3_PIN 2
#define D4_PORT PORT->Group[1]
#define D4_PIN 5
#define D5_PORT PORT->Group[0]
#define D5_PIN 21
#define D6_PORT PORT->Group[1]
#define D6_PIN 15
#define D7_PORT PORT->Group[0]
#define D7_PIN 17
#define D8_PORT PORT->Group[1]
#define D8_PIN 6
#define D9_PORT PORT->Group[1]
#define D9_PIN 7
#define D10_PORT PORT->Group[0]
#define D10_PIN 5
#define D11_PORT PORT->Group[0]
#define D11_PIN 6
#define D12_PORT PORT->Group[0]
#define D12_PIN 4
#define D13_PORT PORT->Group[0]
#define D13_PIN 7
#define A0_PORT PORT->Group[1]
#define A0_PIN 0
#define A1_PORT PORT->Group[1]
#define A1_PIN 1
#define A2_PORT PORT->Group[0]
#define A2_PIN 10
#define A3_PORT PORT->Group[0]
#define A3_PIN 11
#define A4_PORT PORT->Group[0]
#define A4_PIN 8
#define A5_PORT PORT->Group[0]
#define A5_PIN 9
#elif defined(M0_PRO)
#define D0_PORT PORT->Group[0]
#define D0_PIN 11
#define D1_PORT PORT->Group[0]
#define D1_PIN 10
//M0 and Zero physical PA08 and PA14 are swapped
#define D2_PORT PORT->Group[0] //PA08 (Zero-D4)
#define D2_PIN 8
#define D3_PORT PORT->Group[0]
#define D3_PIN 9
#define D4_PORT PORT->Group[0] //PA14 (Zero-D2)
#define D4_PIN 14
#define D5_PORT PORT->Group[0]
#define D5_PIN 15
#define D6_PORT PORT->Group[0]
#define D6_PIN 20
#define D7_PORT PORT->Group[0]
#define D7_PIN 21
#define D8_PORT PORT->Group[0]
#define D8_PIN 6
#define D9_PORT PORT->Group[0]
#define D9_PIN 7
#define D10_PORT PORT->Group[0]
#define D10_PIN 18
#define D11_PORT PORT->Group[0]
#define D11_PIN 16
#define D12_PORT PORT->Group[0]
#define D12_PIN 19
#define D13_PORT PORT->Group[0]
#define D13_PIN 17
//M0 and Zero Arduino digital pin numbering is DIFFERENT
#define D16_PORT PORT->Group[0] //PA22 (SDA) (Zero-D20)
#define D16_PIN 22
#define D17_PORT PORT->Group[0] //PA23 (SCL) (Zero-D21)
#define D17_PIN 23
#define D18_PORT PORT->Group[0] //PA12 (MISO) (Zero-D22)
#define D18_PIN 12
#define D20_PORT PORT->Group[1] //PB11 (SCK) (Zero-D24)
#define D20_PIN 11
#define D21_PORT PORT->Group[1] //PB10 (MOSI) (Zero-D23)
#define D21_PIN 10
#define A0_PORT PORT->Group[0] //PA02(M0-D24) (Zero-D14)
#define A0_PIN 2
#define A1_PORT PORT->Group[1] //PB08
#define A1_PIN 8
#define A2_PORT PORT->Group[1] //PB09
#define A2_PIN 9
#define A3_PORT PORT->Group[0] //PA04
#define A3_PIN 4
#define A4_PORT PORT->Group[0] //PA05
#define A4_PIN 5
#define A5_PORT PORT->Group[1] //PB02
#define A5_PIN 2
#endif
// Shield Control macros.
#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
//####################################### DUE ############################
#elif defined(__SAM3X8E__)
#include <sam3xa.h>
#define D0_PORT PIOA
#define D0_PIN 8
#define D1_PORT PIOA
#define D1_PIN 9
#define D2_PORT PIOB
#define D2_PIN 25
#define D3_PORT PIOC
#define D3_PIN 28
#define D4_PORT PIOC //also PA29
#define D4_PIN 26
#define D5_PORT PIOC
#define D5_PIN 25
#define D6_PORT PIOC
#define D6_PIN 24
#define D7_PORT PIOC
#define D7_PIN 23
#define D8_PORT PIOC
#define D8_PIN 22
#define D9_PORT PIOC
#define D9_PIN 21
#define D10_PORT PIOC //also PA28
#define D10_PIN 29
#define D11_PORT PIOD
#define D11_PIN 7
#define D12_PORT PIOD
#define D12_PIN 8
#define D13_PORT PIOB
#define D13_PIN 27
#define A0_PORT PIOA
#define A0_PIN 16
#define A1_PORT PIOA
#define A1_PIN 24
#define A2_PORT PIOA
#define A2_PIN 23
#define A3_PORT PIOA
#define A3_PIN 22
#define A4_PORT PIOA
#define A4_PIN 6
#define A5_PORT PIOA
#define A5_PIN 4
// Shield Control macros.
#define PIN_LOW(port, pin) (port)->PIO_CODR = (1<<(pin))
#define PIN_HIGH(port, pin) (port)->PIO_SODR = (1<<(pin))
#define PIN_OUTPUT(port, pin) (port)->PIO_OER = (1<<(pin))
#define PIN_INPUT(port, pin) (port)->PIO_ODR &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port)->PIO_PDSR & (1u<<(pin))
#elif defined(__AVR_ATxmegaA4U__)
#include <avr/io.h>
// PD6, PD7 is used for USB. I could have used PORTA for bus, PORTC for MSPI, SPI and remap
#define D0_PORT PORTE
#define D0_PIN 2
#define D1_PORT PORTE
#define D1_PIN 3
#define D2_PORT PORTC
#define D2_PIN 2
#define D3_PORT PORTC
#define D3_PIN 3
#define D4_PORT PORTC
#define D4_PIN 4
#define D5_PORT PORTC
#define D5_PIN 5
#define D6_PORT PORTC
#define D6_PIN 6
#define D7_PORT PORTC
#define D7_PIN 7
#define D8_PORT PORTC
#define D8_PIN 0
#define D9_PORT PORTC
#define D9_PIN 1
#define D10_PORT PORTD
#define D10_PIN 0
#define D11_PORT PORTD
#define D11_PIN 3
#define D12_PORT PORTD
#define D12_PIN 2
#define D13_PORT PORTD
#define D13_PIN 1
#define A0_PORT PORTB
#define A0_PIN 0
#define A1_PORT PORTB
#define A1_PIN 1
#define A2_PORT PORTB
#define A2_PIN 2
#define A3_PORT PORTB
#define A3_PIN 3
#define A4_PORT PORTE
#define A4_PIN 0
#define A5_PORT PORTE
#define A5_PIN 1
// Shield Control macros.
#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
#elif defined(__AVR_ATmega4809__) && defined(ARDUINO_AVR_NANO_EVERY) //NANO-EVERY
#warning using NANO-EVERY
#include <avr/io.h>
#define D0_PORT PORTC
#define D0_PIN 5
#define D1_PORT PORTC
#define D1_PIN 4
#define D2_PORT PORTA
#define D2_PIN 0
#define D3_PORT PORTF
#define D3_PIN 5
#define D4_PORT PORTC
#define D4_PIN 6
#define D5_PORT PORTB
#define D5_PIN 2
#define D6_PORT PORTF
#define D6_PIN 4
#define D7_PORT PORTA
#define D7_PIN 1
#define D8_PORT PORTE
#define D8_PIN 3
#define D9_PORT PORTB
#define D9_PIN 0
#define D10_PORT PORTB //PB1
#define D10_PIN 1
#define D11_PORT PORTE
#define D11_PIN 0
#define D12_PORT PORTE
#define D12_PIN 1
#define D13_PORT PORTE
#define D13_PIN 2
#define A0_PORT PORTD
#define A0_PIN 3
#define A1_PORT PORTD
#define A1_PIN 2
#define A2_PORT PORTD
#define A2_PIN 1
#define A3_PORT PORTD
#define A3_PIN 0
#define A4_PORT PORTF
#define A4_PIN 2
#define A5_PORT PORTF
#define A5_PIN 3
#define A6_PORT PORTD
#define A6_PIN 5
#define A7_PORT PORTD
#define A7_PIN 4
// Shield Control macros.
#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
#elif defined(__AVR_ATmega4809__) //XPRO_4809 with XPRO_SHIELD_ADAPTER
#warning using XPRO_4809 with XPRO_SHIELD_ADAPTER
#include <avr/io.h>
#define D0_PORT PORTA
#define D0_PIN 1
#define D1_PORT PORTA
#define D1_PIN 0
#define D2_PORT PORTB
#define D2_PIN 2
#define D3_PORT PORTC
#define D3_PIN 6
#define D4_PORT PORTC
#define D4_PIN 7
#define D5_PORT PORTF
#define D5_PIN 6
#define D6_PORT PORTB
#define D6_PIN 3
#define D7_PORT PORTE
#define D7_PIN 1
#define D8_PORT PORTA
#define D8_PIN 2
#define D9_PORT PORTA
#define D9_PIN 3
#define D10_PORT PORTA
#define D10_PIN 7
#define D11_PORT PORTA //PC5
#define D11_PIN 4
#define D12_PORT PORTA
#define D12_PIN 5
#define D13_PORT PORTA
#define D13_PIN 6
#define A0_PORT PORTD
#define A0_PIN 2
#define A1_PORT PORTD
#define A1_PIN 3
#define A2_PORT PORTD
#define A2_PIN 4
#define A3_PORT PORTD
#define A3_PIN 5
#define A4_PORT PORTC
#define A4_PIN 2
#define A5_PORT PORTC
#define A5_PIN 3
// Shield Control macros.
#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
#elif defined(__AVR_ATtiny1634__)
#include <avr/io.h>
//
#define D0_PORT PORTA //PA7
#define D0_PIN 7
#define D1_PORT PORTB //PB0
#define D1_PIN 0
#define D2_PORT PORTC //PC2
#define D2_PIN 2
#define D3_PORT PORTA //PA3
#define D3_PIN 3
#define D4_PORT PORTA //PA4
#define D4_PIN 4
#define D5_PORT PORTC //PC4
#define D5_PIN 4
#define D6_PORT PORTA //PA1
#define D6_PIN 1
#define D7_PORT PORTA //PA0
#define D7_PIN 0
#define D8_PORT PORTA //PA2
#define D8_PIN 2
#define D9_PORT PORTC //PC5
#define D9_PIN 5
#define D10_PORT PORTA //PA6
#define D10_PIN 6
#define D11_PORT PORTB //PB2
#define D11_PIN 2
#define D12_PORT PORTB //PB1
#define D12_PIN 1
#define D13_PORT PORTC //PC1
#define D13_PIN 1
#define A0_PORT PORTB //PB3
#define A0_PIN 3
#define A1_PORT PORTC //PC0
#define A1_PIN 0
#define A2_PORT PORTA //PA5
#define A2_PIN 5
#define A3_PORT PORTB //PB2
#define A3_PIN 2
#define A4_PORT PORTB //PB1
#define A4_PIN 1
#define A5_PORT PORTC //PC1
#define A5_PIN 1
#else
#error MCU unselected
#endif // MCUs
#endif //PIN_SHIELD_1_H
#if 0
#if defined(M0_PRO)
#endif
#if defined(D21_XPRO)
#endif
#endif