David Prentice
MCUFRIEND_kbv library for MBED depends on ADA_GFX_kbv library
Dependents: TFT_Touch_botao_v1 TFT_Touch_exemplo5_git_touch TESTE_1 TFT_Touch_exemplo6_git_touch_button_3_ ... more
Diff: utility/pin_shield_1.h
- Revision:
- 0:6f633078852b
- Child:
- 1:06c4b34a5a61
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/utility/pin_shield_1.h Mon Apr 26 14:44:21 2021 +0000
@@ -0,0 +1,1009 @@
+#ifndef PIN_SHIELD_1_H_
+#define PIN_SHIELD_1_H_
+
+// just provide macros for the Arduino pins
+// i.e. PIN_LOW(), PIN_HIGH(), PIN_OUTPUT(), PIN_INPUT(), PIN_READ()
+
+#define LPC810 810
+#define LPC812 812
+#define LPC1343 1343
+#define LPC1768 1768
+#define LPC2103 2103
+#define LPC2148 2148
+
+#define ISTARGET_NUCLEO64 (0 \
+ || defined(TARGET_NUCLEO_F072RB) \
+ || defined(TARGET_NUCLEO_F103RB) \
+ || defined(TARGET_NUCLEO_F401RE) \
+ || defined(TARGET_NUCLEO_F411RE) \
+ || defined(TARGET_NUCLEO_F446RE) \
+ || defined(TARGET_NUCLEO_L433RC_P) \
+ || defined(TARGET_NUCLEO_L476RG) \
+ )
+
+#define ISTARGET_NUCLEO144 (0 \
+ || defined(TARGET_NUCLEO_F767ZI) \
+ )
+
+//#warning Using pin_SHIELD_1.h
+
+#if 0
+#elif defined(MY_BLUEPILL)
+#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
+ #if defined(__CC_ARM)
+ #include <STM32F10X.h>
+ #else
+ #include <STM32F1XX.h>
+ #endif
+ #define D0_PORT GPIOB
+ #define D0_PIN 11
+ #define D1_PORT GPIOB
+ #define D1_PIN 10
+ #define D2_PORT GPIOB
+ #define D2_PIN 6
+ #define D3_PORT GPIOB
+ #define D3_PIN 7
+ #define D4_PORT GPIOA
+ #define D4_PIN 0
+ #define D5_PORT GPIOA
+ #define D5_PIN 1
+ #define D6_PORT GPIOA
+ #define D6_PIN 2
+ #define D7_PORT GPIOA
+ #define D7_PIN 3
+ #define D8_PORT GPIOA
+ #define D8_PIN 9
+ #define D9_PORT GPIOA
+ #define D9_PIN 10
+ #define D10_PORT GPIOB
+ #define D10_PIN 12
+ #define D11_PORT GPIOB
+ #define D11_PIN 15
+ #define D12_PORT GPIOB
+ #define D12_PIN 14
+ #define D13_PORT GPIOB
+ #define D13_PIN 13
+ #define A0_PORT GPIOB
+ #define A0_PIN 1
+ #define A1_PORT GPIOB
+ #define A1_PIN 0
+ #define A2_PORT GPIOA
+ #define A2_PIN 7
+ #define A3_PORT GPIOA
+ #define A3_PIN 6
+ #define A4_PORT GPIOA
+ #define A4_PIN 5
+ #define A5_PORT GPIOB
+ #define A5_PIN 4
+// Shield Control macros
+#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
+#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
+#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
+#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
+#define PIN_OUTPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x3); else PIN_MODE4((port)->CRL, pin, 0x3); } //50MHz push-pull only 0-7
+#define PIN_INPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x4); else PIN_MODE4((port)->CRL, pin, 0x4); } //input
+
+
+#elif defined(BLUEPILL)
+#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
+ #if defined(__CC_ARM)
+ #include <STM32F10X.h>
+ #else
+ #include <STM32F1XX.h>
+ #endif
+ #define D0_PORT GPIOA
+ #define D0_PIN 10
+ #define D1_PORT GPIOA
+ #define D1_PIN 9
+ #define D2_PORT GPIOA
+ #define D2_PIN 2
+ #define D3_PORT GPIOA
+ #define D3_PIN 3
+ #define D4_PORT GPIOA
+ #define D4_PIN 4
+ #define D5_PORT GPIOA
+ #define D5_PIN 5
+ #define D6_PORT GPIOA
+ #define D6_PIN 6
+ #define D7_PORT GPIOA
+ #define D7_PIN 7
+ #define D8_PORT GPIOA
+ #define D8_PIN 0
+ #define D9_PORT GPIOA
+ #define D9_PIN 1
+ #define D10_PORT GPIOA
+ #define D10_PIN 15
+ #define D11_PORT GPIOB
+ #define D11_PIN 5
+ #define D12_PORT GPIOB
+ #define D12_PIN 4
+ #define D13_PORT GPIOB
+ #define D13_PIN 3
+ #define A0_PORT GPIOB
+// #define A0_PIN 5 //original pcb uses SPI pin
+ #define A0_PIN 0 //hardware mod to Adapter to PB0. Allows use of PB5 for SD Card
+ #define A1_PORT GPIOB
+ #define A1_PIN 6
+ #define A2_PORT GPIOB
+ #define A2_PIN 7
+ #define A3_PORT GPIOB
+ #define A3_PIN 8
+ #define A4_PORT GPIOB
+ #define A4_PIN 9
+ #define A5_PORT GPIOB
+ #define A5_PIN 10
+// Shield Control macros
+#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
+#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
+#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
+#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
+#define PIN_OUTPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x3); else PIN_MODE4((port)->CRL, pin, 0x3); } //50MHz push-pull only 0-7
+#define PIN_INPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x4); else PIN_MODE4((port)->CRL, pin, 0x4); } //input
+
+
+#elif defined(ITEADMAPLE)
+#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
+ #if defined(__CC_ARM)
+ #include <STM32F10X.h>
+ #else
+ #include <STM32F1XX.h>
+ #endif
+ #define D0_PORT GPIOA
+ #define D0_PIN 3
+ #define D1_PORT GPIOA
+ #define D1_PIN 2
+ #define D2_PORT GPIOA
+ #define D2_PIN 0
+ #define D3_PORT GPIOA
+ #define D3_PIN 1
+ #define D4_PORT GPIOB
+ #define D4_PIN 5
+ #define D5_PORT GPIOB
+ #define D5_PIN 6
+ #define D6_PORT GPIOA
+ #define D6_PIN 8
+ #define D7_PORT GPIOA
+ #define D7_PIN 9
+ #define D8_PORT GPIOA
+ #define D8_PIN 10
+ #define D9_PORT GPIOB
+ #define D9_PIN 7
+ #define D10_PORT GPIOA
+ #define D10_PIN 4
+ #define D11_PORT GPIOA
+ #define D11_PIN 7
+ #define D12_PORT GPIOA
+ #define D12_PIN 6
+ #define D13_PORT GPIOA
+ #define D13_PIN 5
+ #define A0_PORT GPIOC
+ #define A0_PIN 0
+ #define A1_PORT GPIOC
+ #define A1_PIN 1
+ #define A2_PORT GPIOC
+ #define A2_PIN 2
+ #define A3_PORT GPIOC
+ #define A3_PIN 3
+ #define A4_PORT GPIOC
+ #define A4_PIN 4
+ #define A5_PORT GPIOC
+ #define A5_PIN 5
+// Shield Control macros
+#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
+#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
+#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
+#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
+#define PIN_OUTPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x3); else PIN_MODE4((port)->CRL, pin, 0x3); } //50MHz push-pull only 0-7
+#define PIN_INPUT(port, pin) {if (pin > 7) PIN_MODE4((port)->CRH, (pin&7), 0x4); else PIN_MODE4((port)->CRL, pin, 0x4); } //input
+
+
+#elif defined(NUCLEO144) || ISTARGET_NUCLEO144
+#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
+#if __MBED__
+#warning MBED knows everything
+#elif defined(STM32F767xx)
+ #include <STM32F7XX.h>
+#endif
+ #define D0_PORT GPIOG
+ #define D0_PIN 9
+ #define D1_PORT GPIOG
+ #define D1_PIN 14
+ #define D2_PORT GPIOF
+ #define D2_PIN 15
+ #define D3_PORT GPIOE
+ #define D3_PIN 13
+ #define D4_PORT GPIOF
+ #define D4_PIN 14
+ #define D5_PORT GPIOE
+ #define D5_PIN 11
+ #define D6_PORT GPIOE
+ #define D6_PIN 9
+ #define D7_PORT GPIOF
+ #define D7_PIN 13
+ #define D8_PORT GPIOF
+ #define D8_PIN 12
+ #define D9_PORT GPIOD
+ #define D9_PIN 15
+ #define D10_PORT GPIOD
+ #define D10_PIN 14
+ #define D11_PORT GPIOA
+ #define D11_PIN 7
+ #define D12_PORT GPIOA
+ #define D12_PIN 6
+ #define D13_PORT GPIOA
+ #define D13_PIN 5
+ #define A0_PORT GPIOA
+ #define A0_PIN 3
+ #define A1_PORT GPIOC
+ #define A1_PIN 0
+ #define A2_PORT GPIOC
+ #define A2_PIN 3
+ #define A3_PORT GPIOF
+ #define A3_PIN 3
+ #define A4_PORT GPIOF
+ #define A4_PIN 5
+ #define A5_PORT GPIOF
+ #define A5_PIN 10
+// Shield Control macros
+#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
+#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
+//#define PIN_LOW(port, pin) (port)->ODR &= ~(1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->ODR |= (1<<(pin))
+#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
+#define PIN_OUTPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x1)
+#define PIN_INPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x0) //.kbv check this
+
+#elif defined(NUCLEO) || ISTARGET_NUCLEO64
+#define PIN_MODE2(reg, pin, mode) reg=(reg&~(0x3<<((pin)<<1)))|(mode<<((pin)<<1))
+#if __MBED__
+#warning MBED knows everything
+#elif defined(STM32F072xB)
+ #include <STM32F0XX.h>
+#elif defined(STM32F103xB)
+ #if defined(__CC_ARM)
+ #include <STM32F10X.h>
+ #else
+ #include <STM32F1XX.h>
+ #endif
+#elif defined(STM32L476xx) || defined(STM32L433xx)
+ #include <STM32L4XX.h>
+#elif defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+ #include <STM32F4XX.h>
+#endif
+ #define D0_PORT GPIOA
+ #define D0_PIN 3
+ #define D1_PORT GPIOA
+ #define D1_PIN 2
+ #define D2_PORT GPIOA
+ #define D2_PIN 10
+ #define D3_PORT GPIOB
+ #define D3_PIN 3
+ #define D4_PORT GPIOB
+ #define D4_PIN 5
+ #define D5_PORT GPIOB
+ #define D5_PIN 4
+ #define D6_PORT GPIOB
+ #define D6_PIN 10
+ #define D7_PORT GPIOA
+ #define D7_PIN 8
+ #define D8_PORT GPIOA
+ #define D8_PIN 9
+ #define D9_PORT GPIOC
+ #define D9_PIN 7
+ #define D10_PORT GPIOB
+ #define D10_PIN 6
+ #define D11_PORT GPIOA
+ #define D11_PIN 7
+ #define D12_PORT GPIOA
+ #define D12_PIN 6
+ #define D13_PORT GPIOA
+ #define D13_PIN 5
+ #define A0_PORT GPIOA
+ #define A0_PIN 0
+ #define A1_PORT GPIOA
+ #define A1_PIN 1
+ #define A2_PORT GPIOA
+ #define A2_PIN 4
+ #define A3_PORT GPIOB
+ #define A3_PIN 0
+ #define A4_PORT GPIOC
+ #define A4_PIN 1
+ #define A5_PORT GPIOC
+ #define A5_PIN 0
+// Shield Control macros
+#define PIN_LOW(port, pin) (port)->BSRR = (1<<((pin)+16))
+#define PIN_HIGH(port, pin) (port)->BSRR = (1<<(pin))
+//#define PIN_LOW(port, pin) (port)->ODR &= ~(1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->ODR |= (1<<(pin))
+#define PIN_READ(port, pin) (port)->IDR & (1<<(pin))
+#if defined(STM32F103xB)
+ #warning STM32F103xB ******************************
+#define PIN_MODE4(reg, pin, mode) reg=(reg&~(0xF<<((pin)<<2)))|(mode<<((pin)<<2))
+#define PIN_OUTPUT(port, pin) PIN_MODE4((port)->CRL, pin, 0x3) //50MHz push-pull only 0-7
+#define PIN_INPUT(port, pin) PIN_MODE4((port)->CRL, pin, 0x4) //digital input
+#else
+#define PIN_OUTPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x1)
+#define PIN_INPUT(port, pin) PIN_MODE2((port)->MODER, pin, 0x0) //.kbv check this
+#endif
+
+#elif __TARGET_PROCESSOR == LPC1768
+ #include <LPC17xx.h>
+// configure macros for the control pins
+ #define D0_PORT LPC_GPIO0
+ #define D0_PIN 3
+ #define D1_PORT LPC_GPIO0
+ #define D1_PIN 2
+ #define D2_PORT LPC_GPIO0
+ #define D2_PIN 24 //p16
+ #define D3_PORT LPC_GPIO0
+ #define D3_PIN 23 //p15
+ #define D4_PORT LPC_GPIO0
+ #define D4_PIN 16 //p14
+ #define D5_PORT LPC_GPIO0
+ #define D5_PIN 15 //p13
+ #define D6_PORT LPC_GPIO0
+ #define D6_PIN 17 //p12
+ #define D7_PORT LPC_GPIO0
+ #define D7_PIN 18 //p11
+ #define D8_PORT LPC_GPIO0
+ #define D8_PIN 1 //p10
+ #define D9_PORT LPC_GPIO0
+ #define D9_PIN 0 //p9
+ #define D10_PORT LPC_GPIO0
+ #define D10_PIN 6 //p8
+ #define D11_PORT LPC_GPIO0
+ #define D11_PIN 9 //p5
+ #define D12_PORT LPC_GPIO0
+ #define D12_PIN 8 //p6 miso
+ #define D13_PORT LPC_GPIO0
+ #define D13_PIN 7 //p7
+ #define A0_PORT LPC_GPIO0
+ #define A0_PIN 25 //p17
+ #define A1_PORT LPC_GPIO0
+ #define A1_PIN 26 //p18
+ #define A2_PORT LPC_GPIO1
+ #define A2_PIN 30 //p19
+ #define A3_PORT LPC_GPIO1
+ #define A3_PIN 31 //p20
+ #define A4_PORT LPC_GPIO0
+ #define A4_PIN 10 //p28
+ #define A5_PORT LPC_GP100
+ #define A5_PIN 11 //p27
+// Shield Control macros
+#define PIN_LOW(port, pin) (port)->FIOCLR = (1u<<(pin))
+#define PIN_HIGH(port, pin) (port)->FIOSET = (1u<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->FIODIR |= (1u<<(pin))
+#define PIN_INPUT(port, pin) (port)->FIODIR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->FIOPIN & (1u<<(pin))
+
+#elif (defined(MK20D7) && defined(TEENSY)) || defined(TARGET_TEENSY3_1)
+#if __MBED__
+#warning MBED knows everything
+#else
+ #include <MK20D5.h>
+#endif
+ #define D0_PORT PTB
+ #define D0_PIN 16
+ #define D1_PORT PTB
+ #define D1_PIN 17
+ #define D2_PORT PTD
+ #define D2_PIN 0
+ #define D3_PORT PTA
+ #define D3_PIN 12
+ #define D4_PORT PTA
+ #define D4_PIN 13
+ #define D5_PORT PTD
+ #define D5_PIN 7
+ #define D6_PORT PTD
+ #define D6_PIN 4
+ #define D7_PORT PTD
+ #define D7_PIN 2
+ #define D8_PORT PTD
+ #define D8_PIN 3
+ #define D9_PORT PTC
+ #define D9_PIN 3
+ #define D10_PORT PTC
+ #define D10_PIN 4
+ #define D11_PORT PTC
+ #define D11_PIN 6
+ #define D12_PORT PTC
+ #define D12_PIN 7
+ #define D13_PORT PTC
+ #define D13_PIN 5
+ #define A0_PORT PTD
+ #define A0_PIN 1
+ #define A1_PORT PTC
+ #define A1_PIN 0
+ #define A2_PORT PTB
+ #define A2_PIN 0
+ #define A3_PORT PTB
+ #define A3_PIN 1
+ #define A4_PORT PTB
+ #define A4_PIN 3
+ #define A5_PORT PTB
+ #define A5_PIN 2
+// Shield Control macros. Deliberately avoid the IOSET registers
+#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
+#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
+//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
+
+
+#elif defined(MKL25Z4) || defined(TARGET_KL25Z)
+ #include <MKL25Z4.h>
+ #define D0_PORT PTA
+ #define D0_PIN 1
+ #define D1_PORT PTA
+ #define D1_PIN 2
+ #define D2_PORT PTD
+ #define D2_PIN 4
+ #define D3_PORT PTA
+ #define D3_PIN 12
+ #define D4_PORT PTA
+ #define D4_PIN 4
+ #define D5_PORT PTA
+ #define D5_PIN 5
+ #define D6_PORT PTC
+ #define D6_PIN 8
+ #define D7_PORT PTC
+ #define D7_PIN 9
+ #define D8_PORT PTA
+ #define D8_PIN 13
+ #define D9_PORT PTD
+ #define D9_PIN 5
+ #define D10_PORT PTD
+ #define D10_PIN 0
+ #define D11_PORT PTD
+ #define D11_PIN 2
+ #define D12_PORT PTD
+ #define D12_PIN 3
+ #define D13_PORT PTD
+ #define D13_PIN 1
+ #define A0_PORT PTB
+ #define A0_PIN 0
+ #define A1_PORT PTB
+ #define A1_PIN 1
+ #define A2_PORT PTB
+ #define A2_PIN 2
+ #define A3_PORT PTB
+ #define A3_PIN 3
+ #define A4_PORT PTC
+ #define A4_PIN 2
+ #define A5_PORT PTC
+ #define A5_PIN 1
+// Shield Control macros. Deliberately avoid the IOSET registers
+#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
+#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
+//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
+
+#elif defined(MKL26Z4)
+ #include <MKL26Z4.h>
+ #define D0_PORT PTA
+ #define D0_PIN 1
+ #define D1_PORT PTA
+ #define D1_PIN 2
+ #define D2_PORT PTD
+ #define D2_PIN 3 //PTD4 on KL25
+ #define D3_PORT PTA
+ #define D3_PIN 12
+ #define D4_PORT PTA
+ #define D4_PIN 4
+ #define D5_PORT PTA
+ #define D5_PIN 5
+ #define D6_PORT PTC
+ #define D6_PIN 8
+ #define D7_PORT PTC
+ #define D7_PIN 9
+ #define D8_PORT PTA
+ #define D8_PIN 13
+ #define D9_PORT PTD
+ #define D9_PIN 2 //PTD5 on KL25
+ #define D10_PORT PTD
+ #define D10_PIN 4 //PTD0
+ #define D11_PORT PTD
+ #define D11_PIN 6 //PTD2
+ #define D12_PORT PTD
+ #define D12_PIN 7 //PTD3
+ #define D13_PORT PTD
+ #define D13_PIN 5 //PTD1
+ #define A0_PORT PTB
+ #define A0_PIN 0
+ #define A1_PORT PTB
+ #define A1_PIN 1
+ #define A2_PORT PTB
+ #define A2_PIN 2
+ #define A3_PORT PTB
+ #define A3_PIN 3
+ #define A4_PORT PTC
+ #define A4_PIN 2
+ #define A5_PORT PTC
+ #define A5_PIN 1
+// Shield Control macros. Deliberately avoid the IOSET registers
+#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
+#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
+//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
+
+#elif defined(MKL05Z4) || defined(TARGET_KL05Z)
+ #include <MKL05Z4.h>
+ #define D0_PORT PTB
+ #define D0_PIN 2
+ #define D1_PORT PTB
+ #define D1_PIN 1
+ #define D2_PORT PTA
+ #define D2_PIN 11
+ #define D3_PORT PTB
+ #define D3_PIN 5
+ #define D4_PORT PTA
+ #define D4_PIN 10
+ #define D5_PORT PTA
+ #define D5_PIN 12
+ #define D6_PORT PTB
+ #define D6_PIN 6
+ #define D7_PORT PTB
+ #define D7_PIN 7
+ #define D8_PORT PTB
+ #define D8_PIN 13
+ #define D9_PORT PTB
+ #define D9_PIN 5
+ #define D10_PORT PTA
+ #define D10_PIN 0
+ #define D11_PORT PTA
+ #define D11_PIN 2
+ #define D12_PORT PTA
+ #define D12_PIN 3
+ #define D13_PORT PTB
+ #define D13_PIN 1
+ #define A0_PORT PTB
+ #define A0_PIN 8
+ #define A1_PORT PTB
+ #define A1_PIN 9
+ #define A2_PORT PTA
+ #define A2_PIN 8
+ #define A3_PORT PTA
+ #define A3_PIN 0
+ #define A4_PORT PTA
+ #define A4_PIN 9
+ #define A5_PORT PTB
+ #define A5_PIN 13
+// Shield Control macros
+//#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
+#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
+#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
+
+#elif defined(MK20D5) || defined(TARGET_K20D50M)
+ #include <MK20D5.h>
+ #define D0_PORT PTE
+ #define D0_PIN 1
+ #define D1_PORT PTE
+ #define D1_PIN 0
+ #define D2_PORT PTA
+ #define D2_PIN 5
+ #define D3_PORT PTD
+ #define D3_PIN 4
+ #define D4_PORT PTC
+ #define D4_PIN 8
+ #define D5_PORT PTA
+ #define D5_PIN 1
+ #define D6_PORT PTC
+ #define D6_PIN 3
+ #define D7_PORT PTC
+ #define D7_PIN 4
+ #define D8_PORT PTA
+ #define D8_PIN 12
+ #define D9_PORT PTA
+ #define D9_PIN 2
+ #define D10_PORT PTC
+ #define D10_PIN 2
+ #define D11_PORT PTD
+ #define D11_PIN 2
+ #define D12_PORT PTD
+ #define D12_PIN 3
+ #define D13_PORT PTD
+ #define D13_PIN 1
+ #define A0_PORT PTC
+ #define A0_PIN 0
+ #define A1_PORT PTC
+ #define A1_PIN 1
+ #define A2_PORT PTD
+ #define A2_PIN 6
+ #define A3_PORT PTD
+ #define A3_PIN 5
+ #define A4_PORT PTB
+ #define A4_PIN 1
+ #define A5_PORT PTB
+ #define A5_PIN 0
+// Shield Control macros. Deliberately avoid the IOSET registers
+#define PIN_LOW(port, pin) (port)->PCOR = (1<<(pin))
+#define PIN_HIGH(port, pin) (port)->PSOR = (1<<(pin))
+//#define PIN_LOW(port, pin) (port)->PDOR &= ~(1<<(pin))
+//#define PIN_HIGH(port, pin) (port)->PDOR |= (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->PDDR |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port)->PDDR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->PDIR & (1u<<(pin))
+
+
+#elif defined(ZERO)
+ #include <samd21.h>
+// configure macros for the data pins
+#if defined(D21_XPRO)
+ #define D0_PORT PORT->Group[1]
+ #define D0_PIN 9
+ #define D1_PORT PORT->Group[1]
+ #define D1_PIN 8
+ #define D2_PORT PORT->Group[1]
+ #define D2_PIN 14
+ #define D3_PORT PORT->Group[1]
+ #define D3_PIN 2
+ #define D4_PORT PORT->Group[1]
+ #define D4_PIN 5
+ #define D5_PORT PORT->Group[0]
+ #define D5_PIN 21
+ #define D6_PORT PORT->Group[1]
+ #define D6_PIN 15
+ #define D7_PORT PORT->Group[0]
+ #define D7_PIN 17
+ #define D8_PORT PORT->Group[1]
+ #define D8_PIN 6
+ #define D9_PORT PORT->Group[1]
+ #define D9_PIN 7
+ #define D10_PORT PORT->Group[0]
+ #define D10_PIN 5
+ #define D11_PORT PORT->Group[0]
+ #define D11_PIN 6
+ #define D12_PORT PORT->Group[0]
+ #define D12_PIN 4
+ #define D13_PORT PORT->Group[0]
+ #define D13_PIN 7
+ #define A0_PORT PORT->Group[1]
+ #define A0_PIN 0
+ #define A1_PORT PORT->Group[1]
+ #define A1_PIN 1
+ #define A2_PORT PORT->Group[0]
+ #define A2_PIN 10
+ #define A3_PORT PORT->Group[0]
+ #define A3_PIN 11
+ #define A4_PORT PORT->Group[0]
+ #define A4_PIN 8
+ #define A5_PORT PORT->Group[0]
+ #define A5_PIN 9
+#elif defined(M0_PRO)
+ #define D0_PORT PORT->Group[0]
+ #define D0_PIN 11
+ #define D1_PORT PORT->Group[0]
+ #define D1_PIN 10
+ //M0 and Zero physical PA08 and PA14 are swapped
+ #define D2_PORT PORT->Group[0] //PA08 (Zero-D4)
+ #define D2_PIN 8
+ #define D3_PORT PORT->Group[0]
+ #define D3_PIN 9
+ #define D4_PORT PORT->Group[0] //PA14 (Zero-D2)
+ #define D4_PIN 14
+ #define D5_PORT PORT->Group[0]
+ #define D5_PIN 15
+ #define D6_PORT PORT->Group[0]
+ #define D6_PIN 20
+ #define D7_PORT PORT->Group[0]
+ #define D7_PIN 21
+ #define D8_PORT PORT->Group[0]
+ #define D8_PIN 6
+ #define D9_PORT PORT->Group[0]
+ #define D9_PIN 7
+ #define D10_PORT PORT->Group[0]
+ #define D10_PIN 18
+ #define D11_PORT PORT->Group[0]
+ #define D11_PIN 16
+ #define D12_PORT PORT->Group[0]
+ #define D12_PIN 19
+ #define D13_PORT PORT->Group[0]
+ #define D13_PIN 17
+ //M0 and Zero Arduino digital pin numbering is DIFFERENT
+ #define D16_PORT PORT->Group[0] //PA22 (SDA) (Zero-D20)
+ #define D16_PIN 22
+ #define D17_PORT PORT->Group[0] //PA23 (SCL) (Zero-D21)
+ #define D17_PIN 23
+ #define D18_PORT PORT->Group[0] //PA12 (MISO) (Zero-D22)
+ #define D18_PIN 12
+ #define D20_PORT PORT->Group[1] //PB11 (SCK) (Zero-D24)
+ #define D20_PIN 11
+ #define D21_PORT PORT->Group[1] //PB10 (MOSI) (Zero-D23)
+ #define D21_PIN 10
+ #define A0_PORT PORT->Group[0] //PA02(M0-D24) (Zero-D14)
+ #define A0_PIN 2
+ #define A1_PORT PORT->Group[1] //PB08
+ #define A1_PIN 8
+ #define A2_PORT PORT->Group[1] //PB09
+ #define A2_PIN 9
+ #define A3_PORT PORT->Group[0] //PA04
+ #define A3_PIN 4
+ #define A4_PORT PORT->Group[0] //PA05
+ #define A4_PIN 5
+ #define A5_PORT PORT->Group[1] //PB02
+ #define A5_PIN 2
+
+#endif
+// Shield Control macros.
+#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
+#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
+
+
+//####################################### DUE ############################
+#elif defined(__SAM3X8E__)
+ #include <sam3xa.h>
+ #define D0_PORT PIOA
+ #define D0_PIN 8
+ #define D1_PORT PIOA
+ #define D1_PIN 9
+ #define D2_PORT PIOB
+ #define D2_PIN 25
+ #define D3_PORT PIOC
+ #define D3_PIN 28
+ #define D4_PORT PIOC //also PA29
+ #define D4_PIN 26
+ #define D5_PORT PIOC
+ #define D5_PIN 25
+ #define D6_PORT PIOC
+ #define D6_PIN 24
+ #define D7_PORT PIOC
+ #define D7_PIN 23
+ #define D8_PORT PIOC
+ #define D8_PIN 22
+ #define D9_PORT PIOC
+ #define D9_PIN 21
+ #define D10_PORT PIOC //also PA28
+ #define D10_PIN 29
+ #define D11_PORT PIOD
+ #define D11_PIN 7
+ #define D12_PORT PIOD
+ #define D12_PIN 8
+ #define D13_PORT PIOB
+ #define D13_PIN 27
+ #define A0_PORT PIOA
+ #define A0_PIN 16
+ #define A1_PORT PIOA
+ #define A1_PIN 24
+ #define A2_PORT PIOA
+ #define A2_PIN 23
+ #define A3_PORT PIOA
+ #define A3_PIN 22
+ #define A4_PORT PIOA
+ #define A4_PIN 6
+ #define A5_PORT PIOA
+ #define A5_PIN 4
+// Shield Control macros.
+#define PIN_LOW(port, pin) (port)->PIO_CODR = (1<<(pin))
+#define PIN_HIGH(port, pin) (port)->PIO_SODR = (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port)->PIO_OER = (1<<(pin))
+#define PIN_INPUT(port, pin) (port)->PIO_ODR &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port)->PIO_PDSR & (1u<<(pin))
+
+
+#elif defined(__AVR_ATxmegaA4U__)
+ #include <avr/io.h>
+ // PD6, PD7 is used for USB. I could have used PORTA for bus, PORTC for MSPI, SPI and remap
+ #define D0_PORT PORTE
+ #define D0_PIN 2
+ #define D1_PORT PORTE
+ #define D1_PIN 3
+ #define D2_PORT PORTC
+ #define D2_PIN 2
+ #define D3_PORT PORTC
+ #define D3_PIN 3
+ #define D4_PORT PORTC
+ #define D4_PIN 4
+ #define D5_PORT PORTC
+ #define D5_PIN 5
+ #define D6_PORT PORTC
+ #define D6_PIN 6
+ #define D7_PORT PORTC
+ #define D7_PIN 7
+ #define D8_PORT PORTC
+ #define D8_PIN 0
+ #define D9_PORT PORTC
+ #define D9_PIN 1
+ #define D10_PORT PORTD
+ #define D10_PIN 0
+ #define D11_PORT PORTD
+ #define D11_PIN 3
+ #define D12_PORT PORTD
+ #define D12_PIN 2
+ #define D13_PORT PORTD
+ #define D13_PIN 1
+ #define A0_PORT PORTB
+ #define A0_PIN 0
+ #define A1_PORT PORTB
+ #define A1_PIN 1
+ #define A2_PORT PORTB
+ #define A2_PIN 2
+ #define A3_PORT PORTB
+ #define A3_PIN 3
+ #define A4_PORT PORTE
+ #define A4_PIN 0
+ #define A5_PORT PORTE
+ #define A5_PIN 1
+// Shield Control macros.
+#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
+#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
+
+
+#elif defined(__AVR_ATmega4809__) && defined(ARDUINO_AVR_NANO_EVERY) //NANO-EVERY
+#warning using NANO-EVERY
+ #include <avr/io.h>
+ #define D0_PORT PORTC
+ #define D0_PIN 5
+ #define D1_PORT PORTC
+ #define D1_PIN 4
+ #define D2_PORT PORTA
+ #define D2_PIN 0
+ #define D3_PORT PORTF
+ #define D3_PIN 5
+ #define D4_PORT PORTC
+ #define D4_PIN 6
+ #define D5_PORT PORTB
+ #define D5_PIN 2
+ #define D6_PORT PORTF
+ #define D6_PIN 4
+ #define D7_PORT PORTA
+ #define D7_PIN 1
+ #define D8_PORT PORTE
+ #define D8_PIN 3
+ #define D9_PORT PORTB
+ #define D9_PIN 0
+ #define D10_PORT PORTB //PB1
+ #define D10_PIN 1
+ #define D11_PORT PORTE
+ #define D11_PIN 0
+ #define D12_PORT PORTE
+ #define D12_PIN 1
+ #define D13_PORT PORTE
+ #define D13_PIN 2
+ #define A0_PORT PORTD
+ #define A0_PIN 3
+ #define A1_PORT PORTD
+ #define A1_PIN 2
+ #define A2_PORT PORTD
+ #define A2_PIN 1
+ #define A3_PORT PORTD
+ #define A3_PIN 0
+ #define A4_PORT PORTF
+ #define A4_PIN 2
+ #define A5_PORT PORTF
+ #define A5_PIN 3
+ #define A6_PORT PORTD
+ #define A6_PIN 5
+ #define A7_PORT PORTD
+ #define A7_PIN 4
+// Shield Control macros.
+#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
+#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
+
+
+#elif defined(__AVR_ATmega4809__) //XPRO_4809 with XPRO_SHIELD_ADAPTER
+#warning using XPRO_4809 with XPRO_SHIELD_ADAPTER
+ #include <avr/io.h>
+ #define D0_PORT PORTA
+ #define D0_PIN 1
+ #define D1_PORT PORTA
+ #define D1_PIN 0
+ #define D2_PORT PORTB
+ #define D2_PIN 2
+ #define D3_PORT PORTC
+ #define D3_PIN 6
+ #define D4_PORT PORTC
+ #define D4_PIN 7
+ #define D5_PORT PORTF
+ #define D5_PIN 6
+ #define D6_PORT PORTB
+ #define D6_PIN 3
+ #define D7_PORT PORTE
+ #define D7_PIN 1
+ #define D8_PORT PORTA
+ #define D8_PIN 2
+ #define D9_PORT PORTA
+ #define D9_PIN 3
+ #define D10_PORT PORTA
+ #define D10_PIN 7
+ #define D11_PORT PORTA //PC5
+ #define D11_PIN 4
+ #define D12_PORT PORTA
+ #define D12_PIN 5
+ #define D13_PORT PORTA
+ #define D13_PIN 6
+ #define A0_PORT PORTD
+ #define A0_PIN 2
+ #define A1_PORT PORTD
+ #define A1_PIN 3
+ #define A2_PORT PORTD
+ #define A2_PIN 4
+ #define A3_PORT PORTD
+ #define A3_PIN 5
+ #define A4_PORT PORTC
+ #define A4_PIN 2
+ #define A5_PORT PORTC
+ #define A5_PIN 3
+// Shield Control macros.
+#define PIN_LOW(port, pin) (port).OUTCLR.reg = (1<<(pin))
+#define PIN_HIGH(port, pin) (port).OUTSET.reg = (1<<(pin))
+#define PIN_OUTPUT(port, pin) (port).DIR.reg |= (1<<(pin))
+#define PIN_INPUT(port, pin) (port).DIR.reg &= ~(1u<<(pin))
+#define PIN_READ(port, pin) (port).IN.reg & (1u<<(pin))
+
+
+#elif defined(__AVR_ATtiny1634__)
+ #include <avr/io.h>
+ //
+ #define D0_PORT PORTA //PA7
+ #define D0_PIN 7
+ #define D1_PORT PORTB //PB0
+ #define D1_PIN 0
+ #define D2_PORT PORTC //PC2
+ #define D2_PIN 2
+ #define D3_PORT PORTA //PA3
+ #define D3_PIN 3
+ #define D4_PORT PORTA //PA4
+ #define D4_PIN 4
+ #define D5_PORT PORTC //PC4
+ #define D5_PIN 4
+ #define D6_PORT PORTA //PA1
+ #define D6_PIN 1
+ #define D7_PORT PORTA //PA0
+ #define D7_PIN 0
+ #define D8_PORT PORTA //PA2
+ #define D8_PIN 2
+ #define D9_PORT PORTC //PC5
+ #define D9_PIN 5
+ #define D10_PORT PORTA //PA6
+ #define D10_PIN 6
+ #define D11_PORT PORTB //PB2
+ #define D11_PIN 2
+ #define D12_PORT PORTB //PB1
+ #define D12_PIN 1
+ #define D13_PORT PORTC //PC1
+ #define D13_PIN 1
+ #define A0_PORT PORTB //PB3
+ #define A0_PIN 3
+ #define A1_PORT PORTC //PC0
+ #define A1_PIN 0
+ #define A2_PORT PORTA //PA5
+ #define A2_PIN 5
+ #define A3_PORT PORTB //PB2
+ #define A3_PIN 2
+ #define A4_PORT PORTB //PB1
+ #define A4_PIN 1
+ #define A5_PORT PORTC //PC1
+ #define A5_PIN 1
+#else
+#error MCU unselected
+#endif // MCUs
+
+#endif //PIN_SHIELD_1_H
+#if 0
+#if defined(M0_PRO)
+#endif
+#if defined(D21_XPRO)
+#endif
+#endif
+