Diff: ff.h

Revision:

0:97df4125f18d

Child:

4:af33732dbdc7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ff.h	Tue May 08 11:28:44 2012 +0000
@@ -0,0 +1,344 @@
+/*--------------------------------------------------------------------------/
+/  FatFs - FAT file system module include file  R0.06        (C)ChaN, 2008
+/---------------------------------------------------------------------------/
+/ FatFs module is an experimenal project to implement FAT file system to
+/ cheap microcontrollers. This is a free software and is opened for education,
+/ research and development under license policy of following trems.
+/
+/  Copyright (C) 2008, ChaN, all right reserved.
+/
+/ * The FatFs module is a free software and there is no warranty.
+/ * You can use, modify and/or redistribute it for personal, non-profit or
+/   commercial use without any restriction under your responsibility.
+/ * Redistributions of source code must retain the above copyright notice.
+/
+/---------------------------------------------------------------------------*/
+
+#ifndef _FATFS
+
+#define _MCU_ENDIAN		2
+/* The _MCU_ENDIAN defines which access method is used to the FAT structure.
+/  1: Enable word access.
+/  2: Disable word access and use byte-by-byte access instead.
+/  When the architectural byte order of the MCU is big-endian and/or address
+/  miss-aligned access results incorrect behavior, the _MCU_ENDIAN must be set to 2.
+/  If it is not the case, it can also be set to 1 for good code efficiency. */
+
+#define _FS_READONLY	0
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/  writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
+/  f_truncate and useless f_getfree. */
+
+#define _FS_MINIMIZE	0
+/* The _FS_MINIMIZE option defines minimization level to remove some functions.
+/  0: Full function.
+/  1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename are removed.
+/  2: f_opendir and f_readdir are removed in addition to level 1.
+/  3: f_lseek is removed in addition to level 2. */
+
+#define	_USE_STRFUNC	0
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+#define	_USE_MKFS	1
+/* When _USE_MKFS is set to 1 and _FS_READONLY is set to 0, f_mkfs function is
+/  enabled. */
+
+#define _DRIVES		4
+/* Number of logical drives to be used. This affects the size of internal table. */
+
+#define	_MULTI_PARTITION	0
+/* When _MULTI_PARTITION is set to 0, each logical drive is bound to same
+/  physical drive number and can mount only 1st primaly partition. When it is
+/  set to 1, each logical drive can mount a partition listed in Drives[]. */
+
+#define _USE_FSINFO	0
+/* To enable FSInfo support on FAT32 volume, set _USE_FSINFO to 1. */
+
+#define	_USE_SJIS	1
+/* When _USE_SJIS is set to 1, Shift-JIS code transparency is enabled, otherwise
+/  only US-ASCII(7bit) code can be accepted as file/directory name. */
+
+#define	_USE_NTFLAG	1
+/* When _USE_NTFLAG is set to 1, upper/lower case of the file name is preserved.
+/  Note that the files are always accessed in case insensitive. */
+
+
+#include "integer.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Definitions corresponds to multiple sector size (not tested) */
+#define	S_MAX_SIZ	512U			/* Do not change */
+#if S_MAX_SIZ > 512U
+#define	SS(fs)	((fs)->s_size)
+#else
+#define	SS(fs)	512U
+#endif
+
+
+/* File system object structure */
+typedef struct _FATFS {
+	WORD	id;				/* File system mount ID */
+	WORD	n_rootdir;		/* Number of root directory entries */
+	DWORD	winsect;		/* Current sector appearing in the win[] */
+	DWORD	sects_fat;		/* Sectors per fat */
+	DWORD	max_clust;		/* Maximum cluster# + 1 */
+	DWORD	fatbase;		/* FAT start sector */
+	DWORD	dirbase;		/* Root directory start sector (cluster# for FAT32) */
+	DWORD	database;		/* Data start sector */
+#if !_FS_READONLY
+	DWORD	last_clust;		/* Last allocated cluster */
+	DWORD	free_clust;		/* Number of free clusters */
+#if _USE_FSINFO
+	DWORD	fsi_sector;		/* fsinfo sector */
+	BYTE	fsi_flag;		/* fsinfo dirty flag (1:must be written back) */
+	BYTE	pad2;
+#endif
+#endif
+	BYTE	fs_type;		/* FAT sub type */
+	BYTE	csize;			/* Number of sectors per cluster */
+#if S_MAX_SIZ > 512U
+	WORD	s_size;			/* Sector size */
+#endif
+	BYTE	n_fats;			/* Number of FAT copies */
+	BYTE	drive;			/* Physical drive number */
+	BYTE	winflag;		/* win[] dirty flag (1:must be written back) */
+	BYTE	pad1;
+	BYTE	win[S_MAX_SIZ];	/* Disk access window for Directory/FAT */
+} FATFS;
+
+
+/* Directory object structure */
+typedef struct _DIR {
+	WORD	id;			/* Owner file system mount ID */
+	WORD	index;		/* Current index */
+	FATFS*	fs;			/* Pointer to the owner file system object */
+	DWORD	sclust;		/* Start cluster */
+	DWORD	clust;		/* Current cluster */
+	DWORD	sect;		/* Current sector */
+} FATFS_DIR;
+
+
+/* File object structure */
+typedef struct _FIL {
+	WORD	id;				/* Owner file system mount ID */
+	BYTE	flag;			/* File status flags */
+	BYTE	csect;			/* Sector address in the cluster */
+	FATFS*	fs;				/* Pointer to the owner file system object */
+	DWORD	fptr;			/* File R/W pointer */
+	DWORD	fsize;			/* File size */
+	DWORD	org_clust;		/* File start cluster */
+	DWORD	curr_clust;		/* Current cluster */
+	DWORD	curr_sect;		/* Current sector */
+#if _FS_READONLY == 0
+	DWORD	dir_sect;		/* Sector containing the directory entry */
+	BYTE*	dir_ptr;		/* Ponter to the directory entry in the window */
+#endif
+	BYTE	buffer[S_MAX_SIZ];	/* File R/W buffer */
+} FIL;
+
+
+/* File status structure */
+typedef struct _FILINFO {
+	DWORD fsize;			/* Size */
+	WORD fdate;				/* Date */
+	WORD ftime;				/* Time */
+	BYTE fattrib;			/* Attribute */
+	char fname[8+1+3+1];	/* Name (8.3 format) */
+} FILINFO;
+
+
+
+/* Definitions corresponds to multi partition */
+
+#if _MULTI_PARTITION != 0	/* Multiple partition cfg */
+
+typedef struct _PARTITION {
+	BYTE pd;	/* Physical drive # (0-255) */
+	BYTE pt;	/* Partition # (0-3) */
+} PARTITION;
+extern
+const PARTITION Drives[];			/* Logical drive# to physical location conversion table */
+#define LD2PD(drv) (Drives[drv].pd)	/* Get physical drive# */
+#define LD2PT(drv) (Drives[drv].pt)	/* Get partition# */
+
+#else						/* Single partition cfg */
+
+#define LD2PD(drv) (drv)		/* Physical drive# is equal to logical drive# */
+#define LD2PT(drv) 0			/* Always mounts the 1st partition */
+
+#endif
+
+
+/* File function return code (FRESULT) */
+
+typedef enum {
+	FR_OK = 0,			/* 0 */
+	FR_NOT_READY,		/* 1 */
+	FR_NO_FILE,			/* 2 */
+	FR_NO_PATH,			/* 3 */
+	FR_INVALID_NAME,	/* 4 */
+	FR_INVALID_DRIVE,	/* 5 */
+	FR_DENIED,			/* 6 */
+	FR_EXIST,			/* 7 */
+	FR_RW_ERROR,		/* 8 */
+	FR_WRITE_PROTECTED,	/* 9 */
+	FR_NOT_ENABLED,		/* 10 */
+	FR_NO_FILESYSTEM,	/* 11 */
+	FR_INVALID_OBJECT,	/* 12 */
+	FR_MKFS_ABORTED		/* 13 */
+} FRESULT;
+
+
+
+/*-----------------------------------------------------*/
+/* FatFs module application interface                  */
+
+FRESULT f_mount (BYTE, FATFS*);						/* Mount/Unmount a logical drive */
+FRESULT f_open (FIL*, const char*, BYTE);			/* Open or create a file */
+FRESULT f_read (FIL*, void*, UINT, UINT*);			/* Read data from a file */
+FRESULT f_write (FIL*, const void*, UINT, UINT*);	/* Write data to a file */
+FRESULT f_lseek (FIL*, DWORD);						/* Move file pointer of a file object */
+FRESULT f_close (FIL*);								/* Close an open file object */
+FRESULT f_opendir (FATFS_DIR*, const char*);				/* Open an existing directory */
+FRESULT f_readdir (FATFS_DIR*, FILINFO*);					/* Read a directory item */
+FRESULT f_stat (const char*, FILINFO*);				/* Get file status */
+FRESULT f_getfree (const char*, DWORD*, FATFS**);	/* Get number of free clusters on the drive */
+FRESULT f_truncate (FIL*);							/* Truncate file */
+FRESULT f_sync (FIL*);								/* Flush cached data of a writing file */
+FRESULT f_unlink (const char*);						/* Delete an existing file or directory */
+FRESULT	f_mkdir (const char*);						/* Create a new directory */
+FRESULT f_chmod (const char*, BYTE, BYTE);			/* Change file/dir attriburte */
+FRESULT f_utime (const char*, const FILINFO*);		/* Change file/dir timestamp */
+FRESULT f_rename (const char*, const char*);		/* Rename/Move a file or directory */
+FRESULT f_mkfs (BYTE, BYTE, WORD);					/* Create a file system on the drive */
+#if _USE_STRFUNC
+#define feof(fp) ((fp)->fptr == (fp)->fsize)
+#define EOF -1
+int fputc (int, FIL*);								/* Put a character to the file */
+int fputs (const char*, FIL*);						/* Put a string to the file */
+int fprintf (FIL*, const char*, ...);				/* Put a formatted string to the file */
+char* fgets (char*, int, FIL*);						/* Get a string from the file */
+#endif
+
+/* User defined function to give a current time to fatfs module */
+
+DWORD get_fattime (void);	/* 31-25: Year(0-127 org.1980), 24-21: Month(1-12), 20-16: Day(1-31) */
+							/* 15-11: Hour(0-23), 10-5: Minute(0-59), 4-0: Second(0-29 *2) */
+
+
+
+/* File access control and file status flags (FIL.flag) */
+
+#define	FA_READ				0x01
+#define	FA_OPEN_EXISTING	0x00
+#if _FS_READONLY == 0
+#define	FA_WRITE			0x02
+#define	FA_CREATE_NEW		0x04
+#define	FA_CREATE_ALWAYS	0x08
+#define	FA_OPEN_ALWAYS		0x10
+#define FA__WRITTEN			0x20
+#define FA__DIRTY			0x40
+#endif
+#define FA__ERROR			0x80
+
+
+/* FAT sub type (FATFS.fs_type) */
+
+#define FS_FAT12	1
+#define FS_FAT16	2
+#define FS_FAT32	3
+
+
+/* File attribute bits for directory entry */
+
+#define	AM_RDO	0x01	/* Read only */
+#define	AM_HID	0x02	/* Hidden */
+#define	AM_SYS	0x04	/* System */
+#define	AM_VOL	0x08	/* Volume label */
+#define AM_LFN	0x0F	/* LFN entry */
+#define AM_DIR	0x10	/* Directory */
+#define AM_ARC	0x20	/* Archive */
+
+
+
+/* Offset of FAT structure members */
+
+#define BS_jmpBoot			0
+#define BS_OEMName			3
+#define BPB_BytsPerSec		11
+#define BPB_SecPerClus		13
+#define BPB_RsvdSecCnt		14
+#define BPB_NumFATs			16
+#define BPB_RootEntCnt		17
+#define BPB_TotSec16		19
+#define BPB_Media			21
+#define BPB_FATSz16			22
+#define BPB_SecPerTrk		24
+#define BPB_NumHeads		26
+#define BPB_HiddSec			28
+#define BPB_TotSec32		32
+#define BS_55AA				510
+
+#define BS_DrvNum			36
+#define BS_BootSig			38
+#define BS_VolID			39
+#define BS_VolLab			43
+#define BS_FilSysType		54
+
+#define BPB_FATSz32			36
+#define BPB_ExtFlags		40
+#define BPB_FSVer			42
+#define BPB_RootClus		44
+#define BPB_FSInfo			48
+#define BPB_BkBootSec		50
+#define BS_DrvNum32			64
+#define BS_BootSig32		66
+#define BS_VolID32			67
+#define BS_VolLab32			71
+#define BS_FilSysType32		82
+
+#define	FSI_LeadSig			0
+#define	FSI_StrucSig		484
+#define	FSI_Free_Count		488
+#define	FSI_Nxt_Free		492
+
+#define MBR_Table			446
+
+#define	DIR_Name			0
+#define	DIR_Attr			11
+#define	DIR_NTres			12
+#define	DIR_CrtTime			14
+#define	DIR_CrtDate			16
+#define	DIR_FstClusHI		20
+#define	DIR_WrtTime			22
+#define	DIR_WrtDate			24
+#define	DIR_FstClusLO		26
+#define	DIR_FileSize		28
+
+
+
+/* Multi-byte word access macros  */
+
+#if _MCU_ENDIAN == 1	/* Use word access */
+#define	LD_WORD(ptr)		(WORD)(*(WORD*)(BYTE*)(ptr))
+#define	LD_DWORD(ptr)		(DWORD)(*(DWORD*)(BYTE*)(ptr))
+#define	ST_WORD(ptr,val)	*(WORD*)(BYTE*)(ptr)=(WORD)(val)
+#define	ST_DWORD(ptr,val)	*(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
+#elif _MCU_ENDIAN == 2	/* Use byte-by-byte access */
+#define	LD_WORD(ptr)		(WORD)(((WORD)*(volatile BYTE*)((ptr)+1)<<8)|(WORD)*(volatile BYTE*)(ptr))
+#define	LD_DWORD(ptr)		(DWORD)(((DWORD)*(volatile BYTE*)((ptr)+3)<<24)|((DWORD)*(volatile BYTE*)((ptr)+2)<<16)|((WORD)*(volatile BYTE*)((ptr)+1)<<8)|*(volatile BYTE*)(ptr))
+#define	ST_WORD(ptr,val)	*(volatile BYTE*)(ptr)=(BYTE)(val); *(volatile BYTE*)((ptr)+1)=(BYTE)((WORD)(val)>>8)
+#define	ST_DWORD(ptr,val)	*(volatile BYTE*)(ptr)=(BYTE)(val); *(volatile BYTE*)((ptr)+1)=(BYTE)((WORD)(val)>>8); *(volatile BYTE*)((ptr)+2)=(BYTE)((DWORD)(val)>>16); *(volatile BYTE*)((ptr)+3)=(BYTE)((DWORD)(val)>>24)
+#else
+#error Do not forget to set _MCU_ENDIAN properly!
+#endif
+
+#ifdef __cplusplus
+};
+#endif
+
+#define _FATFS
+#endif /* _FATFS */