Steps to build this firmware with Mbed CLI

Import project

$ mbed import http://os.mbed.com/users/coisme/code/Pelion-GR-LYCHEE-camera-firmware/

Setting

Ethernet (GR-PEACH only)
- Change the file name mbed_app.RZ_A1H_Ethernet.json to mbed_app.json
Wi-Fi
- Change the Wi-Fi setting in mbed_app.json, i.e. nsapi.default-wifi-ssid and nsapi.default-wifi-password

If you haven't set your Pelion API key, run the following command.

$ mbed config -G CLOUD_SDK_API_KEY <API_KEY>

Setting for Pelion Device Management

$ mbed dm init -d "example.com" --model-name "PELION_DEMO" -q --force

Compile

For GR-LYCHEE:

$ mbed compile -t GCC_ARM -m GR_LYCHEE

For GR-PEACH:

$ mbed compile -t GCC_ARM -m RZ_A1H

Write the created .bin file to your GR-LYCHEE/PEACH.

That's it! :-)

LED Status Indicator

LEDs next to UB0 show the status of your GR-LYCHEE/PEACH.

LED#	GR-LYCHEE	GR-PEACH	Status	Description
LED1	green	red	Normal	Turned on after the device is registered to Pelion Device Management successfully.
LED2	yellow	green	Error	Turned on when the network initialization failed. Check your Wi-Fi setting.
LED3	orange	blue	Error	Turned on when the Pelion Device Management Client initialization failed. Check your SD card.
LED4	red	red	Error	Turned on when the network is disconnected. Check your Wi-Fi network status.

Clear device identity

If you want to clear the device's identity, connect to the device via serial terminal. Then input r command. The device flushes the identity storage, then reboot.

Known Issues

client_error(6) -> Client in reconnection mode NetworkError appears when connecting to network, but eventually connection will be established.
Warning message "MBEDTLS_TEST_NULL_ENTROPY has been enabled. This configuration is not secure and is not suitable for production use" appears when compiling the project for GR-PEACH. This can be ignored in development stage.

mbed_cloud_client_user_config.h

Committer:: MACRUM
Date:: 2018-12-15
Revision:: 0:6d2053b84a92
Child:: 22:4d927fcd97e1

File content as of revision 0:6d2053b84a92:

// ----------------------------------------------------------------------------
// Copyright 2016-2017 ARM Ltd.
//
// SPDX-License-Identifier: Apache-2.0
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// ----------------------------------------------------------------------------

// This file is a template and it's intented to be copied to the application
// Enable this configuration

#ifndef MBED_CLOUD_CLIENT_USER_CONFIG_H
#define MBED_CLOUD_CLIENT_USER_CONFIG_H

#ifdef MBED_CONF_APP_ENDPOINT_TYPE
#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE         MBED_CONF_APP_ENDPOINT_TYPE
#else
#define MBED_CLOUD_CLIENT_ENDPOINT_TYPE         "default"
#endif

// Enable either TCP or UDP, but no both
#define MBED_CLOUD_CLIENT_TRANSPORT_MODE_TCP
// MBED_CLOUD_CLIENT_TRANSPORT_MODE_UDP

#define MBED_CLOUD_CLIENT_LIFETIME              3600

#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE
#define SN_COAP_MAX_BLOCKWISE_PAYLOAD_SIZE       1024

// set flag to enable update support in mbed Cloud client
#define MBED_CLOUD_CLIENT_SUPPORT_UPDATE

// set download buffer size in bytes (min. 1024 bytes)

// Use larger buffers in Linux //
#ifdef __linux__
#define MBED_CLOUD_CLIENT_UPDATE_BUFFER          (2 * 1024 * 1024)
#else
#define MBED_CLOUD_CLIENT_UPDATE_BUFFER          2048
#endif

// Developer flags for Update feature
#if MBED_CONF_APP_DEVELOPER_MODE == 1
    #define MBED_CLOUD_DEV_UPDATE_CERT
    #define MBED_CLOUD_DEV_UPDATE_ID
#endif // MBED_CONF_APP_DEVELOPER_MODE

#endif // MBED_CLOUD_CLIENT_USER_CONFIG_H