cliff Hong
Dweet IO example for WIZwiki-W7500
Dependencies: HTTPClient WIZnetInterface mbed
Fork of
dweetIoExample
by 
WIZnet
Prerequisite
This example is for sending data to DweetIO.
To implement this function, you need a Platform board, network Interface board.
- WIZwiki-W7500 from WIZnet (Platform board and Ethernet I/F board)
- ETC: PGM5537(CDS sensor) + 10k resistor
Hardware Configuration
WIZwiki-W7500 Pin map
Software
main.cpp
#include "mbed.h"
#include "EthernetInterface.h"
#include "HTTPClient.h"
const char * IP_Addr = "IP Address";
const char * IP_Subnet = "IP Subnet";
const char * IP_Gateway = "IP Gateway";
unsigned char MAC_Addr[6] = {0x00,0x08,0xDC,0x12,0x34,0x56};
Serial pc(USBTX, USBRX);
AnalogIn CDSSensor(PC_15);//Analog A0 input. pgm5537 CDS sensor and 10k resistor.
/******************
VCC A0 GND
| | |
| | |
| | |
| | |
--10k-----CDS---
*******************/
int main() {
pc.printf("Start!\r\n\r\n");
EthernetInterface ethernet;
mbed_mac_address((char *)MAC_Addr); //Use mbed mac addres
pc.baud(115200);
#if USE_DHCP
int ret = ethernet.init(MAC_Addr);
#else
int ret = ethernet.init(MAC_Addr,IP_Addr,IP_Subnet,IP_Gateway);
#endif
if (!ret) {
pc.printf("Initialized, MAC: %s\r\n", ethernet.getMACAddress());
ret = ethernet.connect();
if (!ret) {
pc.printf("IP: %s, MASK: %s, GW: %s\r\n",
ethernet.getIPAddress(), ethernet.getNetworkMask(), ethernet.getGateway());
} else {
pc.printf("Error ethernet.connect() - ret = %d\r\n", ret);
exit(0);
}
} else {
pc.printf("Error ethernet.init() - ret = %d\r\n", ret);
exit(0);
}
char str[512] = "";
char get_msg[128] = "";
/*
http://dweet.io/follow/nameYouWant
*/
char nameYouWant[] = "nameYouWant";
while(1)
{
sprintf(get_msg,"http://dweet.io/dweet/for/%s?a0=%d",nameYouWant,(int)(CDSSensor.read()*1000));
HTTPClient http;
pc.printf("Send post message to dweet.io\r\n");
pc.printf("msg : %s\r\n",get_msg);
ret = http.get(get_msg, str, sizeof(str));
if(!ret)
{
pc.printf("\r\nPage fetched successfully - read %d characters\r\n", strlen(str));
pc.printf("Result: %s\r\n", str);
}
else
{
pc.printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
}
wait(10);
}
}
Revision 0:d372849df255, committed 2015-05-07
- Comitter:
- bangbh
- Date:
- Thu May 07 02:19:12 2015 +0000
- Child:
- 1:06d1dfb5b7eb
- Commit message:
- Dweet IO example with "Wiznet W5500 Ethernet kit for IoT".
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HTTPClient.lib Thu May 07 02:19:12 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/kaizen/code/HTTPClient/#9ba72b4d7ffc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/WIZnet_Library.lib Thu May 07 02:19:12 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/WIZnet/code/WIZnet_Library/#ca8405b9564d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu May 07 02:19:12 2015 +0000
@@ -0,0 +1,79 @@
+#include "mbed.h"
+#include "WIZnetInterface.h"
+#include "HTTPClient.h"
+
+#define USE_DHCP 0
+
+const char * IP_Addr = "222.98.173.212";
+const char * IP_Subnet = "255.255.255.192";
+const char * IP_Gateway = "222.98.173.254";
+unsigned char MAC_Addr[6] = {0x00,0x08,0xDC,0x12,0x34,0x56};
+
+Serial pc(USBTX, USBRX);
+
+#ifdef TARGET_LPC11U68
+SPI spi(P0_9,P0_8,P1_29);
+WIZnetInterface ethernet(&spi,P0_2,P1_13);
+AnalogIn CDSSensor(P1_9);//Analog A0 input. pgm5537 CDS sensor and 10k resistor.
+/******************
+VCC A0 GND
+ | | |
+ | | |
+ | | |
+ | | |
+ --10k-----CDS---
+*******************/
+#endif
+
+int main() {
+
+ mbed_mac_address((char *)MAC_Addr); //Use mbed mac addres
+ pc.baud(115200);
+ #if USE_DHCP
+ int ret = ethernet.init(MAC_Addr);
+ #else
+ int ret = ethernet.init(MAC_Addr,IP_Addr,IP_Subnet,IP_Gateway);
+ #endif
+ if (!ret) {
+ pc.printf("Initialized, MAC: %s\r\n", ethernet.getMACAddress());
+ ret = ethernet.connect();
+ if (!ret) {
+ pc.printf("IP: %s, MASK: %s, GW: %s\r\n",
+ ethernet.getIPAddress(), ethernet.getNetworkMask(), ethernet.getGateway());
+ } else {
+ pc.printf("Error ethernet.connect() - ret = %d\r\n", ret);
+ exit(0);
+ }
+ } else {
+ pc.printf("Error ethernet.init() - ret = %d\r\n", ret);
+ exit(0);
+ }
+
+ char str[512];
+ char get_msg[128]= "";
+
+ /*
+ http://dweet.io/follow/nameYouWant
+ */
+ char nameYouWant[] = "nameYouWant";
+ while(1)
+ {
+ sprintf(get_msg,"http://dweet.io/dweet/for/%s?a0=%d",nameYouWant,(int)(CDSSensor.read()*1000));
+ HTTPClient http;
+
+ pc.printf("Send post message to dweet.io\r\n");
+ pc.printf("msg : %s\r\n",get_msg);
+ ret = http.get(get_msg, str, sizeof(str));
+ if(!ret)
+ {
+ pc.printf("\r\nPage fetched successfully - read %d characters\r\n", strlen(str));
+ pc.printf("Result: %s\r\n", str);
+ }
+ else
+ {
+ pc.printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
+ }
+ wait(5);
+ }
+
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu May 07 02:19:12 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/8ab26030e058 \ No newline at end of file