chris kayley
chris’s activity
Comment on:
MPU 6050 Accelerometer only outputs 0
- 3.29V measured on both Vdd and Vio. Ive done a continuity test on the other …
chris kayley
- 31 Oct 2013
chris kayley
- 31 Oct 2013
Answer posted for Question:
MPU 6050 Accelerometer only outputs 0 - Using different Library: https://mbed.org/users/Sissors/code/MPU6050/ [[/media/uploads/christopher_kayley/connection_successful.bmp]]
chris kayley
- 30 Oct 2013
chris kayley
- 30 Oct 2013
Comment on:
MPU 6050 Accelerometer only outputs 0
- When the MPU_6050 address is changed to 0x68 it succesfully makes connection but then continues …
chris kayley
- 30 Oct 2013
chris kayley
- 30 Oct 2013
Comment on:
MPU 6050 Accelerometer only outputs 0
- I have tried your own Library: https://mbed.org/users/Sissors/code/MPU6050/ In this instance the Connection test fails.
chris kayley
- 30 Oct 2013
chris kayley
- 30 Oct 2013
Comment on:
MPU 6050 Accelerometer only outputs 0
- Yes that is the board I have. Vdd is connected to 3.3v also
chris kayley
- 30 Oct 2013
chris kayley
- 30 Oct 2013
Comment on:
MPU 6050 Accelerometer only outputs 0
- Power Pin used to light an external LED I have on my breadboard. It is …
chris kayley
- 28 Oct 2013
chris kayley
- 28 Oct 2013
