Carlos Silva / 24_TFT_STMNUCLEO

Code to run the cheap 2.4" TFT made by mcufriend.com on the STM nucleo. No modifications required, this plugs into the arduino header.

Dependents:   ST7735_V2_STM32F407

Fork of TFTLCD_8bit by Thiha Electronics

Diff: ssd1289.cpp

Revision:
17:866f2a851dd7
Parent:
16:4ccc2fa2cfec
Child:
18:b934d95cc380
--- a/ssd1289.cpp	Wed Dec 12 07:17:31 2012 +0000
+++ b/ssd1289.cpp	Wed Dec 12 18:08:41 2012 +0000
@@ -71,23 +71,23 @@
     {
         switch ( _orientation )
         {
-            case LANDSCAPE:
+            case LANDSCAPE: // uder test
                 WriteCmdData( 0x01, 0x2B3F ); // driver output control // 0x293F 0x2B3F 0x2D3F 0x2F3F 0x693F 0x6B3F 0x6D3F 0x6F3F
                 wait_ms( 1 );
-                WriteCmdData( 0x11, 0x6030 ); // entry mode // 0x6040 0x6048 0x6050 0x6058 0x6060 0x6068
+                WriteCmdData( 0x11, 0x6068 ); // entry mode // 0x6040 0x6048 0x6050 0x6058 0x6060 0x6068
                 break;
                 
-            case PORTRAIT_REV:
+            case PORTRAIT_REV: // works
                 WriteCmdData( 0x01, 0x693F ); // driver output control
                 wait_ms( 1 );
                 WriteCmdData( 0x11, 0x6070 ); // entry mode
                 break;
                 
-            case LANDSCAPE_REV:
-                WriteCmdData( 0x11, 0x60A8 ); // entry mode
+            case LANDSCAPE_REV: // uder test
+                WriteCmdData( 0x11, 0x6068 ); // entry mode
                 break;
                 
-            case PORTRAIT:
+            case PORTRAIT: // works
             default:
                 WriteCmdData( 0x01, 0x2B3F ); // driver output control
                 wait_ms( 1 );
@@ -99,23 +99,23 @@
     {
         switch ( _orientation )
         {
-            case LANDSCAPE:
+            case LANDSCAPE: // uder test
                 WriteCmdData( 0x01, 0x293F ); // driver output control // 0x293F 0x2B3F 0x2D3F 0x2F3F 0x693F 0x6B3F 0x6D3F 0x6F3F
                 wait_ms( 1 );
-                WriteCmdData( 0x11, 0x4048 ); // entry mode // 0x4040 0x4048 0x4050 0x4058 0x4060 0x4068
+                WriteCmdData( 0x11, 0x4068 ); // entry mode // 0x4040 0x4048 0x4050 0x4058 0x4060 0x4068
                 break;
                 
-            case PORTRAIT_REV:
+            case PORTRAIT_REV: // works
                 WriteCmdData( 0x01, 0x693F ); // driver output control
                 wait_ms( 1 );
                 WriteCmdData( 0x11, 0x4070 ); // entry mode
                 break;
                 
-            case LANDSCAPE_REV:
+            case LANDSCAPE_REV: // uder test
                 WriteCmdData( 0x11, 0x4068 ); // entry mode
                 break;
                 
-            case PORTRAIT:
+            case PORTRAIT: // works
             default:
                 WriteCmdData( 0x01, 0x2B3F ); // driver output control
                 wait_ms( 1 );