Diff: main.cpp

Revision:

2:9dfb7ebaaa6e

Parent:

1:ad1b075585bc

--- a/main.cpp	Fri Jun 01 10:05:51 2018 +0000
+++ b/main.cpp	Fri Jun 01 19:09:47 2018 +0000
@@ -27,71 +27,71 @@
     if (interruptStatus.bits.pwr_rdy == 0x1) {
         printf("Powered on\r\n");
         
-        // Soft reset
-        MAX30101::ModeConfiguration_u modeConf;
-        modeConf.all = 0;
-        modeConf.bits.reset = 1;
-        hr.setModeConfiguration(modeConf);
-        wait(0.01);
-        
-        // Configure FIFO
-        MAX30101::FIFO_Configuration_u fifoConf;
-        hr.getFIFOConfiguration(fifoConf);
-        pc.printf("FIFO Configuration: 0x%02x\r\n", fifoConf.all);
-          
-        // Set LED power
-        hr.setLEDPulseAmplitude(MAX30101::LED1_PA, 0x0C);
-        hr.setLEDPulseAmplitude(MAX30101::ProxModeLED_PA, 0x19);
-        pc.printf("LED set\r\n");
-        
-        MAX30101::SpO2Configuration_u spo2Conf;
-        hr.getSpO2Configuration(spo2Conf);
-        spo2Conf.bits.led_pw = MAX30101::PW_1;
-        spo2Conf.bits.spo2_sr = MAX30101::SR_100_Hz;
-        hr.setSpO2Configuration(spo2Conf);
-        hr.getSpO2Configuration(spo2Conf);
-        pc.printf("SpO2 Configuration: 0x%02x\r\n", spo2Conf.all);
-        
-        // Proximity settings
-        hr.setProxIntThreshold(0x14);
-        
-        // Enable HR mode
-        modeConf.all = 0;
-        modeConf.bits.mode = MAX30101::HeartRateMode;
-        hr.setModeConfiguration(modeConf);
-        printf("Mode set\r\n");
+//        // Soft reset
+//        MAX30101::ModeConfiguration_u modeConf;
+//        modeConf.all = 0;
+//        modeConf.bits.reset = 1;
+//        hr.setModeConfiguration(modeConf);
+//        wait(0.01);
+//        
+//        // Configure FIFO
+//        MAX30101::FIFO_Configuration_u fifoConf;
+//        hr.getFIFOConfiguration(fifoConf);
+//        pc.printf("FIFO Configuration: 0x%02x\r\n", fifoConf.all);
+//          
+//        // Set LED power
+//        hr.setLEDPulseAmplitude(MAX30101::LED1_PA, 0x0C);
+//        hr.setLEDPulseAmplitude(MAX30101::ProxModeLED_PA, 0x19);
+//        pc.printf("LED set\r\n");
+//        
+//        MAX30101::SpO2Configuration_u spo2Conf;
+//        hr.getSpO2Configuration(spo2Conf);
+//        spo2Conf.bits.led_pw = MAX30101::PW_1;
+//        spo2Conf.bits.spo2_sr = MAX30101::SR_100_Hz;
+//        hr.setSpO2Configuration(spo2Conf);
+//        hr.getSpO2Configuration(spo2Conf);
+//        pc.printf("SpO2 Configuration: 0x%02x\r\n", spo2Conf.all);
+//        
+//        // Proximity settings
+//        hr.setProxIntThreshold(0x14);
+//        
+//        // Enable HR mode
+//        modeConf.all = 0;
+//        modeConf.bits.mode = MAX30101::HeartRateMode;
+//        hr.setModeConfiguration(modeConf);
+//        printf("Mode set\r\n");
     }
     
-    if (interruptStatus.bits.prox_int == 0x1) {
-        printf("Proximity Triggered, entered HR Mode.");
-    }
-    
-    if (interruptStatus.bits.ppg_rdy == 0x1) {
-        printf("PPG Ready.\r\n");
-        mask_ppg = 1;
-    }
-    
-    if (interruptStatus.bits.a_full == 0x1) {
-        printf("FIFO Almost Full.\r\n");
-        uint8_t data[FIFO_DATA_MAX];
-        uint16_t readBytes = 0;
-        hr.readFIFO(MAX30101::OneLedChannel, data, readBytes);
-        
-        for (uint16_t i = 0; i < readBytes; i += 3) {
-            uint8_t sample[4] = {0};
-            sample[0] = data[i + 2];
-            sample[1] = data[i + 1];
-            sample[2] = data[i];
-            
-            printf("%u\r\n", *(uint32_t *) sample);
-        }
-    }
-    
-    interruptStatus.all = 0xFF;
-    if (mask_ppg == 1) {
-        interruptStatus.bits.ppg_rdy = 0;
-    }
-    hr.enableInterrupts(interruptStatus);
+//    if (interruptStatus.bits.prox_int == 0x1) {
+//        printf("Proximity Triggered, entered HR Mode.");
+//    }
+//    
+//    if (interruptStatus.bits.ppg_rdy == 0x1) {
+//        printf("PPG Ready.\r\n");
+//        mask_ppg = 1;
+//    }
+//    
+//    if (interruptStatus.bits.a_full == 0x1) {
+//        printf("FIFO Almost Full.\r\n");
+//        uint8_t data[FIFO_DATA_MAX];
+//        uint16_t readBytes = 0;
+//        hr.readFIFO(MAX30101::OneLedChannel, data, readBytes);
+//        
+//        for (uint16_t i = 0; i < readBytes; i += 3) {
+//            uint8_t sample[4] = {0};
+//            sample[0] = data[i + 2];
+//            sample[1] = data[i + 1];
+//            sample[2] = data[i];
+//            
+//            printf("%u\r\n", *(uint32_t *) sample);
+//        }
+//    }
+//    
+//    interruptStatus.all = 0xFF;
+//    if (mask_ppg == 1) {
+//        interruptStatus.bits.ppg_rdy = 0;
+//    }
+//    hr.enableInterrupts(interruptStatus);
 }
 
 void interruptHandler() {