cassyarduino cassyarduino / UIPEthernet

UIPEthernet library for Arduino IDE, Eclipse with arduino plugin and MBED/SMeshStudio (AVR,STM32F,ESP8266,Intel ARC32,Nordic nRF51,Teensy boards,Realtek Ameba(RTL8195A,RTL8710)), ENC28j60 network chip. Compatible with Wiznet W5100 Ethernet library API. Compiled and tested on Nucleo-F302R8. Master repository is: https://github.com/UIPEthernet/UIPEthernet/

utility/uipethernet-conf.h

Committer:
cassyarduino
Date:
2018-01-23
Revision:
39:deeb00b81cc9
Parent:
21:c4439c50a5af

File content as of revision 39:deeb00b81cc9:

#ifndef UIPETHERNET_CONF_H
#define UIPETHERNET_CONF_H

/* for TCP */
#define UIP_SOCKET_NUMPACKETS    5
#define UIP_CONF_MAX_CONNECTIONS 4

/* for UDP
 * set UIP_CONF_UDP to 0 to disable UDP (saves aprox. 5kb flash) */
#define UIP_CONF_UDP             1
#define UIP_CONF_BROADCAST       1
#define UIP_CONF_UDP_CONNS       4

/* number of attempts on write before returning number of bytes sent so far
 * set to -1 to block until connection is closed by timeout */
#define UIP_ATTEMPTS_ON_WRITE    -1

/* timeout after which UIPClient::connect gives up. The timeout is specified in seconds.
 * if set to a number <= 0 connect will timeout when uIP does (which might be longer than you expect...) */
#define UIP_CONNECT_TIMEOUT      -1

/* periodic timer for uip (in ms) */
#define UIP_PERIODIC_TIMER       250

/* timer to poll client for data after last write (in ms)
 * set to -1 to disable fast polling and rely on periodic only (saves 100 bytes flash) */
#define UIP_CLIENT_TIMER         10

#endif