File content as of revision 3:6b1c9bd7773a:

/*
 UIPUdp.h - Arduino implementation of a uIP wrapper class
 Copyright (c) 2013 Norbert Truchsess <norbert.truchsess@t-online.de>
 All rights reserved.

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef UIPUDP_H
#define UIPUDP_H

#include "ethernet_comp.h"
#if defined(__MBED__)
  #include <mbed.h>
  #include "mbed/Udp.h"
#endif
#if defined(ARDUINO)
  #include <Arduino.h>
  #include <Udp.h>
#endif
#include "utility/mempool.h"
extern "C" {
  #include "utility/uip.h"
}

#define UIP_UDP_MAXDATALEN 1500
#define UIP_UDP_PHYH_LEN UIP_LLH_LEN+UIP_IPUDPH_LEN
#define UIP_UDP_MAXPACKETSIZE UIP_UDP_MAXDATALEN+UIP_UDP_PHYH_LEN

typedef struct {
  memaddress out_pos;
  memhandle packet_next;
  memhandle packet_in;
  memhandle packet_out;
  bool send;
} uip_udp_userdata_t;

class UIPUDP : public UDP
{

private:
  struct uip_udp_conn *_uip_udp_conn;

  uip_udp_userdata_t appdata;

public:
  UIPUDP(void);  // Constructor
  uint8_t
  begin(uint16_t);// initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
  void
  stop(void);  // Finish with the UDP socket

  // Sending UDP packets

  // Start building up a packet to send to the remote host specific in ip and port
  // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
  int
  beginPacket(IPAddress ip, uint16_t port);
  // Start building up a packet to send to the remote host specific in host and port
  // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
  int
  beginPacket(const char *host, uint16_t port);
  // Finish off this packet and send it
  // Returns 1 if the packet was sent successfully, 0 if there was an error
  int
  endPacket(void);
  // Write a single byte into the packet
  size_t
  write(uint8_t);
  // Write size bytes from buffer into the packet
  size_t
  write(const uint8_t *buffer, size_t size);

  #if defined(ARDUINO)
  	  using Print::write;
  #endif
  // Start processing the next available incoming packet
  // Returns the size of the packet in bytes, or 0 if no packets are available
  int
  parsePacket(void);
  // Number of bytes remaining in the current packet
  int
  available(void);
  // Read a single byte from the current packet
  int
  read(void);
  // Read up to len bytes from the current packet and place them into buffer
  // Returns the number of bytes read, or 0 if none are available
  int
  read(unsigned char* buffer, size_t len);
  // Read up to len characters from the current packet and place them into buffer
  // Returns the number of characters read, or 0 if none are available
  int
  read(char* buffer, size_t len)
  {
    return read((unsigned char*) buffer, len);
  }
  ;
  // Return the next byte from the current packet without moving on to the next byte
  int
  peek(void);
  void
  flush(void);	// Finish reading the current packet

  // Return the IP address of the host who sent the current incoming packet
  IPAddress
  remoteIP(void);

  // Return the port of the host who sent the current incoming packet
  uint16_t
  remotePort(void);

private:

  friend void uipudp_appcall(void);

  friend class UIPEthernetClass;
  static void _send(uip_udp_userdata_t *data);

};

#endif