Christian Krueger / Mbed OS Dot-Examples_receive

test recieve

Dependencies:   libxDot-mbed5 ISL29011

Fork of Dot-Examples by MultiTech

examples/src/peer_to_peer_example.cpp@25:bd723518db86, 2018-02-11 (annotated)

Committer:
cakrueger2
Date:
Sun Feb 11 00:01:23 2018 +0000
Revision:
25:bd723518db86
Parent:
22:d9bc10bbc433 
one

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 11:d2e31743433a 1 #include "dot_util.h"
Mike Fiore 14:19fae4509473 2 #include "RadioEvent.h"
Mike Fiore 11:d2e31743433a 3
Mike Fiore 11:d2e31743433a 4 #if ACTIVE_EXAMPLE == PEER_TO_PEER_EXAMPLE
Mike Fiore 11:d2e31743433a 5
mfiore 17:d4f82e16de5f 6 /////////////////////////////////////////////////////////////////////////////
mfiore 17:d4f82e16de5f 7 // -------------------- DOT LIBRARY REQUIRED ------------------------------//
mfiore 17:d4f82e16de5f 8 // * Because these example programs can be used for both mDot and xDot //
mfiore 17:d4f82e16de5f 9 // devices, the LoRa stack is not included. The libmDot library should //
mfiore 17:d4f82e16de5f 10 // be imported if building for mDot devices. The libxDot library //
mfiore 17:d4f82e16de5f 11 // should be imported if building for xDot devices. //
mfiore 17:d4f82e16de5f 12 // * https://developer.mbed.org/teams/MultiTech/code/libmDot-dev-mbed5/ //
mfiore 17:d4f82e16de5f 13 // * https://developer.mbed.org/teams/MultiTech/code/libmDot-mbed5/ //
mfiore 17:d4f82e16de5f 14 // * https://developer.mbed.org/teams/MultiTech/code/libxDot-dev-mbed5/ //
mfiore 17:d4f82e16de5f 15 // * https://developer.mbed.org/teams/MultiTech/code/libxDot-mbed5/ //
mfiore 17:d4f82e16de5f 16 /////////////////////////////////////////////////////////////////////////////
mfiore 17:d4f82e16de5f 17
Mike Fiore 11:d2e31743433a 18 /////////////////////////////////////////////////////////////
Mike Fiore 11:d2e31743433a 19 // * these options must match between the two devices in //
Mike Fiore 11:d2e31743433a 20 // order for communication to be successful
Mike Fiore 11:d2e31743433a 21 /////////////////////////////////////////////////////////////
Mike Fiore 11:d2e31743433a 22 static uint8_t network_address[] = { 0x01, 0x02, 0x03, 0x04 };
Mike Fiore 11:d2e31743433a 23 static uint8_t network_session_key[] = { 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04 };
Mike Fiore 11:d2e31743433a 24 static uint8_t data_session_key[] = { 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04 };
Mike Fiore 11:d2e31743433a 25
Mike Fiore 11:d2e31743433a 26 mDot* dot = NULL;
Mike Fiore 21:09d05faf0e13 27 lora::ChannelPlan* plan = NULL;
Mike Fiore 11:d2e31743433a 28
Mike Fiore 11:d2e31743433a 29 Serial pc(USBTX, USBRX);
Mike Fiore 11:d2e31743433a 30
Mike Fiore 11:d2e31743433a 31 #if defined(TARGET_XDOT_L151CC)
Mike Fiore 11:d2e31743433a 32 I2C i2c(I2C_SDA, I2C_SCL);
Mike Fiore 11:d2e31743433a 33 ISL29011 lux(i2c);
Mike Fiore 11:d2e31743433a 34 #else
Mike Fiore 11:d2e31743433a 35 AnalogIn lux(XBEE_AD0);
Mike Fiore 11:d2e31743433a 36 #endif
Mike Fiore 11:d2e31743433a 37
Mike Fiore 11:d2e31743433a 38 int main() {
Mike Fiore 14:19fae4509473 39 // Custom event handler for automatically displaying RX data
Mike Fiore 11:d2e31743433a 40 RadioEvent events;
Mike Fiore 11:d2e31743433a 41 uint32_t tx_frequency;
Mike Fiore 11:d2e31743433a 42 uint8_t tx_datarate;
Mike Fiore 11:d2e31743433a 43 uint8_t tx_power;
Mike Fiore 11:d2e31743433a 44 uint8_t frequency_band;
Mike Fiore 11:d2e31743433a 45
Mike Fiore 11:d2e31743433a 46 pc.baud(115200);
Mike Fiore 11:d2e31743433a 47
Mike Fiore 11:d2e31743433a 48 mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL);
Mike Fiore 11:d2e31743433a 49
Mike Fiore 21:09d05faf0e13 50 #if CHANNEL_PLAN == CP_US915
Mike Fiore 21:09d05faf0e13 51 plan = new lora::ChannelPlan_US915();
Mike Fiore 21:09d05faf0e13 52 #elif CHANNEL_PLAN == CP_AU915
Mike Fiore 21:09d05faf0e13 53 plan = new lora::ChannelPlan_AU915();
Mike Fiore 21:09d05faf0e13 54 #elif CHANNEL_PLAN == CP_EU868
Mike Fiore 21:09d05faf0e13 55 plan = new lora::ChannelPlan_EU868();
Mike Fiore 21:09d05faf0e13 56 #elif CHANNEL_PLAN == CP_KR920
Mike Fiore 21:09d05faf0e13 57 plan = new lora::ChannelPlan_KR920();
Mike Fiore 21:09d05faf0e13 58 #elif CHANNEL_PLAN == CP_AS923
Mike Fiore 21:09d05faf0e13 59 plan = new lora::ChannelPlan_AS923();
Mike Fiore 21:09d05faf0e13 60 #elif CHANNEL_PLAN == CP_AS923_JAPAN
Mike Fiore 21:09d05faf0e13 61 plan = new lora::ChannelPlan_AS923_Japan();
mfiore 22:d9bc10bbc433 62 #elif CHANNEL_PLAN == CP_IN865
mfiore 22:d9bc10bbc433 63 plan = new lora::ChannelPlan_IN865();
Mike Fiore 21:09d05faf0e13 64 #endif
Mike Fiore 21:09d05faf0e13 65 assert(plan);
Mike Fiore 21:09d05faf0e13 66
Mike Fiore 21:09d05faf0e13 67 dot = mDot::getInstance(plan);
Mike Fiore 21:09d05faf0e13 68 assert(dot);
Mike Fiore 11:d2e31743433a 69
Mike Fiore 16:a3832552dfe1 70 logInfo("mbed-os library version: %d", MBED_LIBRARY_VERSION);
Mike Fiore 16:a3832552dfe1 71
Mike Fiore 12:ec9768677cea 72 // start from a well-known state
Mike Fiore 12:ec9768677cea 73 logInfo("defaulting Dot configuration");
Mike Fiore 12:ec9768677cea 74 dot->resetConfig();
Mike Fiore 12:ec9768677cea 75
Mike Fiore 11:d2e31743433a 76 // make sure library logging is turned on
Mike Fiore 11:d2e31743433a 77 dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
Mike Fiore 11:d2e31743433a 78
Mike Fiore 11:d2e31743433a 79 // attach the custom events handler
Mike Fiore 11:d2e31743433a 80 dot->setEvents(&events);
Mike Fiore 11:d2e31743433a 81
Mike Fiore 11:d2e31743433a 82 // update configuration if necessary
Mike Fiore 11:d2e31743433a 83 if (dot->getJoinMode() != mDot::PEER_TO_PEER) {
Mike Fiore 11:d2e31743433a 84 logInfo("changing network join mode to PEER_TO_PEER");
Mike Fiore 11:d2e31743433a 85 if (dot->setJoinMode(mDot::PEER_TO_PEER) != mDot::MDOT_OK) {
Mike Fiore 11:d2e31743433a 86 logError("failed to set network join mode to PEER_TO_PEER");
Mike Fiore 11:d2e31743433a 87 }
Mike Fiore 11:d2e31743433a 88 }
Mike Fiore 11:d2e31743433a 89 frequency_band = dot->getFrequencyBand();
Mike Fiore 11:d2e31743433a 90 switch (frequency_band) {
Mike Fiore 21:09d05faf0e13 91 case lora::ChannelPlan::EU868_OLD:
Mike Fiore 21:09d05faf0e13 92 case lora::ChannelPlan::EU868:
Mike Fiore 11:d2e31743433a 93 // 250kHz channels achieve higher throughput
Mike Fiore 21:09d05faf0e13 94 // DR_6 : SF7 @ 250kHz
Mike Fiore 21:09d05faf0e13 95 // DR_0 - DR_5 (125kHz channels) available but much slower
Mike Fiore 11:d2e31743433a 96 tx_frequency = 869850000;
Mike Fiore 21:09d05faf0e13 97 tx_datarate = lora::DR_6;
Mike Fiore 11:d2e31743433a 98 // the 869850000 frequency is 100% duty cycle if the total power is under 7 dBm - tx power 4 + antenna gain 3 = 7
Mike Fiore 11:d2e31743433a 99 tx_power = 4;
Mike Fiore 11:d2e31743433a 100 break;
Mike Fiore 21:09d05faf0e13 101
Mike Fiore 21:09d05faf0e13 102 case lora::ChannelPlan::US915_OLD:
Mike Fiore 21:09d05faf0e13 103 case lora::ChannelPlan::US915:
Mike Fiore 21:09d05faf0e13 104 case lora::ChannelPlan::AU915_OLD:
Mike Fiore 21:09d05faf0e13 105 case lora::ChannelPlan::AU915:
Mike Fiore 11:d2e31743433a 106 // 500kHz channels achieve highest throughput
Mike Fiore 21:09d05faf0e13 107 // DR_8 : SF12 @ 500kHz
Mike Fiore 21:09d05faf0e13 108 // DR_9 : SF11 @ 500kHz
Mike Fiore 21:09d05faf0e13 109 // DR_10 : SF10 @ 500kHz
Mike Fiore 21:09d05faf0e13 110 // DR_11 : SF9 @ 500kHz
Mike Fiore 21:09d05faf0e13 111 // DR_12 : SF8 @ 500kHz
Mike Fiore 21:09d05faf0e13 112 // DR_13 : SF7 @ 500kHz
Mike Fiore 21:09d05faf0e13 113 // DR_0 - DR_3 (125kHz channels) available but much slower
Mike Fiore 11:d2e31743433a 114 tx_frequency = 915500000;
Mike Fiore 21:09d05faf0e13 115 tx_datarate = lora::DR_13;
Mike Fiore 11:d2e31743433a 116 // 915 bands have no duty cycle restrictions, set tx power to max
Mike Fiore 11:d2e31743433a 117 tx_power = 20;
Mike Fiore 11:d2e31743433a 118 break;
Mike Fiore 21:09d05faf0e13 119
Mike Fiore 21:09d05faf0e13 120 case lora::ChannelPlan::AS923:
Mike Fiore 21:09d05faf0e13 121 case lora::ChannelPlan::AS923_JAPAN:
Mike Fiore 21:09d05faf0e13 122 // 250kHz channels achieve higher throughput
Mike Fiore 21:09d05faf0e13 123 // DR_6 : SF7 @ 250kHz
Mike Fiore 21:09d05faf0e13 124 // DR_0 - DR_5 (125kHz channels) available but much slower
Mike Fiore 21:09d05faf0e13 125 tx_frequency = 924800000;
Mike Fiore 21:09d05faf0e13 126 tx_datarate = lora::DR_6;
Mike Fiore 21:09d05faf0e13 127 tx_power = 16;
Mike Fiore 21:09d05faf0e13 128 break;
Mike Fiore 21:09d05faf0e13 129
Mike Fiore 21:09d05faf0e13 130 case lora::ChannelPlan::KR920:
Mike Fiore 21:09d05faf0e13 131 // DR_5 : SF7 @ 125kHz
Mike Fiore 21:09d05faf0e13 132 tx_frequency = 922700000;
Mike Fiore 21:09d05faf0e13 133 tx_datarate = lora::DR_5;
Mike Fiore 21:09d05faf0e13 134 tx_power = 14;
Mike Fiore 21:09d05faf0e13 135 break;
Mike Fiore 21:09d05faf0e13 136
Mike Fiore 21:09d05faf0e13 137 default:
Mike Fiore 21:09d05faf0e13 138 while (true) {
Mike Fiore 21:09d05faf0e13 139 logFatal("no known channel plan in use - extra configuration is needed!");
Mike Fiore 21:09d05faf0e13 140 wait(5);
Mike Fiore 21:09d05faf0e13 141 }
Mike Fiore 21:09d05faf0e13 142 break;
Mike Fiore 11:d2e31743433a 143 }
Mike Fiore 11:d2e31743433a 144 // in PEER_TO_PEER mode there is no join request/response transaction
Mike Fiore 11:d2e31743433a 145 // as long as both Dots are configured correctly, they should be able to communicate
Mike Fiore 11:d2e31743433a 146 update_peer_to_peer_config(network_address, network_session_key, data_session_key, tx_frequency, tx_datarate, tx_power);
Mike Fiore 11:d2e31743433a 147
Mike Fiore 11:d2e31743433a 148 // save changes to configuration
Mike Fiore 11:d2e31743433a 149 logInfo("saving configuration");
Mike Fiore 11:d2e31743433a 150 if (!dot->saveConfig()) {
Mike Fiore 11:d2e31743433a 151 logError("failed to save configuration");
Mike Fiore 11:d2e31743433a 152 }
Mike Fiore 11:d2e31743433a 153
Mike Fiore 11:d2e31743433a 154 // display configuration
Mike Fiore 11:d2e31743433a 155 display_config();
Mike Fiore 11:d2e31743433a 156
Mike Fiore 11:d2e31743433a 157 #if defined(TARGET_XDOT_L151CC)
Mike Fiore 11:d2e31743433a 158 // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range
Mike Fiore 11:d2e31743433a 159 lux.setMode(ISL29011::ALS_CONT);
Mike Fiore 11:d2e31743433a 160 lux.setResolution(ISL29011::ADC_16BIT);
Mike Fiore 11:d2e31743433a 161 lux.setRange(ISL29011::RNG_64000);
Mike Fiore 11:d2e31743433a 162 #endif
Mike Fiore 11:d2e31743433a 163
Mike Fiore 11:d2e31743433a 164 while (true) {
Mike Fiore 11:d2e31743433a 165 uint16_t light;
cakrueger2 25:bd723518db86 166 std::vector<uint8_t> rx_data;
Mike Fiore 11:d2e31743433a 167
Mike Fiore 11:d2e31743433a 168 // join network if not joined
Mike Fiore 11:d2e31743433a 169 if (!dot->getNetworkJoinStatus()) {
Mike Fiore 11:d2e31743433a 170 join_network();
Mike Fiore 11:d2e31743433a 171 }
Mike Fiore 11:d2e31743433a 172
Mike Fiore 11:d2e31743433a 173
cakrueger2 25:bd723518db86 174 dot->openRxWindow(6000, dot->getFrequencyBand());
cakrueger2 25:bd723518db86 175 dot->recv(rx_data);
cakrueger2 25:bd723518db86 176 for(int i = 0; i< rx_data.size(); i++)
cakrueger2 25:bd723518db86 177 {
cakrueger2 25:bd723518db86 178 logInfo("%x02",rx_data[i]);
cakrueger2 25:bd723518db86 179 }
cakrueger2 25:bd723518db86 180 //wait(6);
cakrueger2 25:bd723518db86 181 void closeRxWindow();
cakrueger2 25:bd723518db86 182
Mike Fiore 11:d2e31743433a 183 }
Mike Fiore 11:d2e31743433a 184
Mike Fiore 11:d2e31743433a 185 return 0;
Mike Fiore 11:d2e31743433a 186 }
Mike Fiore 11:d2e31743433a 187
Mike Fiore 11:d2e31743433a 188 #endif
Mike Fiore 11:d2e31743433a 189