Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
lwip_auth.c
00001 /* 00002 * auth.c - PPP authentication and phase control. 00003 * 00004 * Copyright (c) 1993-2002 Paul Mackerras. All rights reserved. 00005 * 00006 * Redistribution and use in source and binary forms, with or without 00007 * modification, are permitted provided that the following conditions 00008 * are met: 00009 * 00010 * 1. Redistributions of source code must retain the above copyright 00011 * notice, this list of conditions and the following disclaimer. 00012 * 00013 * 2. The name(s) of the authors of this software must not be used to 00014 * endorse or promote products derived from this software without 00015 * prior written permission. 00016 * 00017 * 3. Redistributions of any form whatsoever must retain the following 00018 * acknowledgment: 00019 * "This product includes software developed by Paul Mackerras 00020 * <paulus@samba.org>". 00021 * 00022 * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO 00023 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 00024 * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY 00025 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 00026 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 00027 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 00028 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 00029 * 00030 * Derived from main.c, which is: 00031 * 00032 * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. 00033 * 00034 * Redistribution and use in source and binary forms, with or without 00035 * modification, are permitted provided that the following conditions 00036 * are met: 00037 * 00038 * 1. Redistributions of source code must retain the above copyright 00039 * notice, this list of conditions and the following disclaimer. 00040 * 00041 * 2. Redistributions in binary form must reproduce the above copyright 00042 * notice, this list of conditions and the following disclaimer in 00043 * the documentation and/or other materials provided with the 00044 * distribution. 00045 * 00046 * 3. The name "Carnegie Mellon University" must not be used to 00047 * endorse or promote products derived from this software without 00048 * prior written permission. For permission or any legal 00049 * details, please contact 00050 * Office of Technology Transfer 00051 * Carnegie Mellon University 00052 * 5000 Forbes Avenue 00053 * Pittsburgh, PA 15213-3890 00054 * (412) 268-4387, fax: (412) 268-7395 00055 * tech-transfer@andrew.cmu.edu 00056 * 00057 * 4. Redistributions of any form whatsoever must retain the following 00058 * acknowledgment: 00059 * "This product includes software developed by Computing Services 00060 * at Carnegie Mellon University (http://www.cmu.edu/computing/)." 00061 * 00062 * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO 00063 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 00064 * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE 00065 * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 00066 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 00067 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 00068 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 00069 */ 00070 00071 #include "netif/ppp/ppp_opts.h" 00072 #if PPP_SUPPORT /* don't build if not configured for use in lwipopts.h */ 00073 00074 #if 0 /* UNUSED */ 00075 #include <stdio.h> 00076 #include <stddef.h> 00077 #include <stdlib.h> 00078 #include <unistd.h> 00079 #include <errno.h> 00080 #include <pwd.h> 00081 #include <grp.h> 00082 #include <string.h> 00083 #include <sys/types.h> 00084 #include <sys/stat.h> 00085 #include <sys/socket.h> 00086 #include <utmp.h> 00087 #include <fcntl.h> 00088 #if defined(_PATH_LASTLOG) && defined(__linux__) 00089 #include <lastlog.h> 00090 #endif 00091 00092 #include <netdb.h> 00093 #include <netinet/in.h> 00094 #include <arpa/inet.h> 00095 00096 #ifdef HAS_SHADOW 00097 #include <shadow.h> 00098 #ifndef PW_PPP 00099 #define PW_PPP PW_LOGIN 00100 #endif 00101 #endif 00102 00103 #include <time.h> 00104 #endif /* UNUSED */ 00105 00106 #include "netif/ppp/ppp_impl.h" 00107 00108 #include "netif/ppp/fsm.h" 00109 #include "netif/ppp/lcp.h" 00110 #if CCP_SUPPORT 00111 #include "netif/ppp/ccp.h" 00112 #endif /* CCP_SUPPORT */ 00113 #if ECP_SUPPORT 00114 #include "netif/ppp/ecp.h" 00115 #endif /* ECP_SUPPORT */ 00116 #include "netif/ppp/ipcp.h" 00117 #if PAP_SUPPORT 00118 #include "netif/ppp/upap.h" 00119 #endif /* PAP_SUPPORT */ 00120 #if CHAP_SUPPORT 00121 #include "netif/ppp/chap-new.h" 00122 #endif /* CHAP_SUPPORT */ 00123 #if EAP_SUPPORT 00124 #include "netif/ppp/eap.h" 00125 #endif /* EAP_SUPPORT */ 00126 #if CBCP_SUPPORT 00127 #include "netif/ppp/cbcp.h" 00128 #endif 00129 00130 #if 0 /* UNUSED */ 00131 #include "session.h" 00132 #endif /* UNUSED */ 00133 00134 #if 0 /* UNUSED */ 00135 /* Bits in scan_authfile return value */ 00136 #define NONWILD_SERVER 1 00137 #define NONWILD_CLIENT 2 00138 00139 #define ISWILD(word) (word[0] == '*' && word[1] == 0) 00140 #endif /* UNUSED */ 00141 00142 #if 0 /* UNUSED */ 00143 /* List of addresses which the peer may use. */ 00144 static struct permitted_ip *addresses[NUM_PPP]; 00145 00146 /* Wordlist giving addresses which the peer may use 00147 without authenticating itself. */ 00148 static struct wordlist *noauth_addrs; 00149 00150 /* Remote telephone number, if available */ 00151 char remote_number[MAXNAMELEN]; 00152 00153 /* Wordlist giving remote telephone numbers which may connect. */ 00154 static struct wordlist *permitted_numbers; 00155 00156 /* Extra options to apply, from the secrets file entry for the peer. */ 00157 static struct wordlist *extra_options; 00158 #endif /* UNUSED */ 00159 00160 #if 0 /* UNUSED */ 00161 /* Set if we require authentication only because we have a default route. */ 00162 static bool default_auth; 00163 00164 /* Hook to enable a plugin to control the idle time limit */ 00165 int (*idle_time_hook) (struct ppp_idle *) = NULL; 00166 00167 /* Hook for a plugin to say whether we can possibly authenticate any peer */ 00168 int (*pap_check_hook) (void) = NULL; 00169 00170 /* Hook for a plugin to check the PAP user and password */ 00171 int (*pap_auth_hook) (char *user, char *passwd, char **msgp, 00172 struct wordlist **paddrs, 00173 struct wordlist **popts) = NULL; 00174 00175 /* Hook for a plugin to know about the PAP user logout */ 00176 void (*pap_logout_hook) (void) = NULL; 00177 00178 /* Hook for a plugin to get the PAP password for authenticating us */ 00179 int (*pap_passwd_hook) (char *user, char *passwd) = NULL; 00180 00181 /* Hook for a plugin to say if we can possibly authenticate a peer using CHAP */ 00182 int (*chap_check_hook) (void) = NULL; 00183 00184 /* Hook for a plugin to get the CHAP password for authenticating us */ 00185 int (*chap_passwd_hook) (char *user, char *passwd) = NULL; 00186 00187 /* Hook for a plugin to say whether it is OK if the peer 00188 refuses to authenticate. */ 00189 int (*null_auth_hook) (struct wordlist **paddrs, 00190 struct wordlist **popts) = NULL; 00191 00192 int (*allowed_address_hook) (u32_t addr) = NULL; 00193 #endif /* UNUSED */ 00194 00195 #ifdef HAVE_MULTILINK 00196 /* Hook for plugin to hear when an interface joins a multilink bundle */ 00197 void (*multilink_join_hook) (void) = NULL; 00198 #endif 00199 00200 #if PPP_NOTIFY 00201 /* A notifier for when the peer has authenticated itself, 00202 and we are proceeding to the network phase. */ 00203 struct notifier *auth_up_notifier = NULL; 00204 00205 /* A notifier for when the link goes down. */ 00206 struct notifier *link_down_notifier = NULL; 00207 #endif /* PPP_NOTIFY */ 00208 00209 /* 00210 * Option variables. 00211 */ 00212 #if 0 /* MOVED TO ppp_settings */ 00213 bool uselogin = 0; /* Use /etc/passwd for checking PAP */ 00214 bool session_mgmt = 0; /* Do session management (login records) */ 00215 bool cryptpap = 0; /* Passwords in pap-secrets are encrypted */ 00216 bool refuse_pap = 0; /* Don't wanna auth. ourselves with PAP */ 00217 bool refuse_chap = 0; /* Don't wanna auth. ourselves with CHAP */ 00218 bool refuse_eap = 0; /* Don't wanna auth. ourselves with EAP */ 00219 #if MSCHAP_SUPPORT 00220 bool refuse_mschap = 0; /* Don't wanna auth. ourselves with MS-CHAP */ 00221 bool refuse_mschap_v2 = 0; /* Don't wanna auth. ourselves with MS-CHAPv2 */ 00222 #else /* MSCHAP_SUPPORT */ 00223 bool refuse_mschap = 1; /* Don't wanna auth. ourselves with MS-CHAP */ 00224 bool refuse_mschap_v2 = 1; /* Don't wanna auth. ourselves with MS-CHAPv2 */ 00225 #endif /* MSCHAP_SUPPORT */ 00226 bool usehostname = 0; /* Use hostname for our_name */ 00227 bool auth_required = 0; /* Always require authentication from peer */ 00228 bool allow_any_ip = 0; /* Allow peer to use any IP address */ 00229 bool explicit_remote = 0; /* User specified explicit remote name */ 00230 bool explicit_user = 0; /* Set if "user" option supplied */ 00231 bool explicit_passwd = 0; /* Set if "password" option supplied */ 00232 char remote_name[MAXNAMELEN]; /* Peer's name for authentication */ 00233 static char *uafname; /* name of most recent +ua file */ 00234 00235 extern char *crypt (const char *, const char *); 00236 #endif /* UNUSED */ 00237 /* Prototypes for procedures local to this file. */ 00238 00239 static void network_phase(ppp_pcb *pcb); 00240 #if PPP_IDLETIMELIMIT 00241 static void check_idle(void *arg); 00242 #endif /* PPP_IDLETIMELIMIT */ 00243 #if PPP_MAXCONNECT 00244 static void connect_time_expired(void *arg); 00245 #endif /* PPP_MAXCONNECT */ 00246 #if 0 /* UNUSED */ 00247 static int null_login (int); 00248 /* static int get_pap_passwd (char *); */ 00249 static int have_pap_secret (int *); 00250 static int have_chap_secret (char *, char *, int, int *); 00251 static int have_srp_secret (char *client, char *server, int need_ip, 00252 int *lacks_ipp); 00253 static int ip_addr_check (u32_t, struct permitted_ip *); 00254 static int scan_authfile (FILE *, char *, char *, char *, 00255 struct wordlist **, struct wordlist **, 00256 char *, int); 00257 static void free_wordlist (struct wordlist *); 00258 static void set_allowed_addrs (int, struct wordlist *, struct wordlist *); 00259 static int some_ip_ok (struct wordlist *); 00260 static int setupapfile (char **); 00261 static int privgroup (char **); 00262 static int set_noauth_addr (char **); 00263 static int set_permitted_number (char **); 00264 static void check_access (FILE *, char *); 00265 static int wordlist_count (struct wordlist *); 00266 #endif /* UNUSED */ 00267 00268 #ifdef MAXOCTETS 00269 static void check_maxoctets (void *); 00270 #endif 00271 00272 #if PPP_OPTIONS 00273 /* 00274 * Authentication-related options. 00275 */ 00276 option_t auth_options[] = { 00277 { "auth", o_bool, &auth_required, 00278 "Require authentication from peer", OPT_PRIO | 1 }, 00279 { "noauth", o_bool, &auth_required, 00280 "Don't require peer to authenticate", OPT_PRIOSUB | OPT_PRIV, 00281 &allow_any_ip }, 00282 { "require-pap", o_bool, &lcp_wantoptions[0].neg_upap, 00283 "Require PAP authentication from peer", 00284 OPT_PRIOSUB | 1, &auth_required }, 00285 { "+pap", o_bool, &lcp_wantoptions[0].neg_upap, 00286 "Require PAP authentication from peer", 00287 OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required }, 00288 { "require-chap", o_bool, &auth_required, 00289 "Require CHAP authentication from peer", 00290 OPT_PRIOSUB | OPT_A2OR | MDTYPE_MD5, 00291 &lcp_wantoptions[0].chap_mdtype }, 00292 { "+chap", o_bool, &auth_required, 00293 "Require CHAP authentication from peer", 00294 OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MD5, 00295 &lcp_wantoptions[0].chap_mdtype }, 00296 #if MSCHAP_SUPPORT 00297 { "require-mschap", o_bool, &auth_required, 00298 "Require MS-CHAP authentication from peer", 00299 OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT, 00300 &lcp_wantoptions[0].chap_mdtype }, 00301 { "+mschap", o_bool, &auth_required, 00302 "Require MS-CHAP authentication from peer", 00303 OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT, 00304 &lcp_wantoptions[0].chap_mdtype }, 00305 { "require-mschap-v2", o_bool, &auth_required, 00306 "Require MS-CHAPv2 authentication from peer", 00307 OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT_V2, 00308 &lcp_wantoptions[0].chap_mdtype }, 00309 { "+mschap-v2", o_bool, &auth_required, 00310 "Require MS-CHAPv2 authentication from peer", 00311 OPT_ALIAS | OPT_PRIOSUB | OPT_A2OR | MDTYPE_MICROSOFT_V2, 00312 &lcp_wantoptions[0].chap_mdtype }, 00313 #endif /* MSCHAP_SUPPORT */ 00314 #if 0 00315 { "refuse-pap", o_bool, &refuse_pap, 00316 "Don't agree to auth to peer with PAP", 1 }, 00317 { "-pap", o_bool, &refuse_pap, 00318 "Don't allow PAP authentication with peer", OPT_ALIAS | 1 }, 00319 { "refuse-chap", o_bool, &refuse_chap, 00320 "Don't agree to auth to peer with CHAP", 00321 OPT_A2CLRB | MDTYPE_MD5, 00322 &lcp_allowoptions[0].chap_mdtype }, 00323 { "-chap", o_bool, &refuse_chap, 00324 "Don't allow CHAP authentication with peer", 00325 OPT_ALIAS | OPT_A2CLRB | MDTYPE_MD5, 00326 &lcp_allowoptions[0].chap_mdtype }, 00327 #endif 00328 #if MSCHAP_SUPPORT 00329 #if 0 00330 { "refuse-mschap", o_bool, &refuse_mschap, 00331 "Don't agree to auth to peer with MS-CHAP", 00332 OPT_A2CLRB | MDTYPE_MICROSOFT, 00333 &lcp_allowoptions[0].chap_mdtype }, 00334 { "-mschap", o_bool, &refuse_mschap, 00335 "Don't allow MS-CHAP authentication with peer", 00336 OPT_ALIAS | OPT_A2CLRB | MDTYPE_MICROSOFT, 00337 &lcp_allowoptions[0].chap_mdtype }, 00338 { "refuse-mschap-v2", o_bool, &refuse_mschap_v2, 00339 "Don't agree to auth to peer with MS-CHAPv2", 00340 OPT_A2CLRB | MDTYPE_MICROSOFT_V2, 00341 &lcp_allowoptions[0].chap_mdtype }, 00342 { "-mschap-v2", o_bool, &refuse_mschap_v2, 00343 "Don't allow MS-CHAPv2 authentication with peer", 00344 OPT_ALIAS | OPT_A2CLRB | MDTYPE_MICROSOFT_V2, 00345 &lcp_allowoptions[0].chap_mdtype }, 00346 #endif 00347 #endif /* MSCHAP_SUPPORT*/ 00348 #if EAP_SUPPORT 00349 { "require-eap", o_bool, &lcp_wantoptions[0].neg_eap, 00350 "Require EAP authentication from peer", OPT_PRIOSUB | 1, 00351 &auth_required }, 00352 #if 0 00353 { "refuse-eap", o_bool, &refuse_eap, 00354 "Don't agree to authenticate to peer with EAP", 1 }, 00355 #endif 00356 #endif /* EAP_SUPPORT */ 00357 { "name", o_string, our_name, 00358 "Set local name for authentication", 00359 OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXNAMELEN }, 00360 00361 { "+ua", o_special, (void *)setupapfile, 00362 "Get PAP user and password from file", 00363 OPT_PRIO | OPT_A2STRVAL, &uafname }, 00364 00365 #if 0 00366 { "user", o_string, user, 00367 "Set name for auth with peer", OPT_PRIO | OPT_STATIC, 00368 &explicit_user, MAXNAMELEN }, 00369 00370 { "password", o_string, passwd, 00371 "Password for authenticating us to the peer", 00372 OPT_PRIO | OPT_STATIC | OPT_HIDE, 00373 &explicit_passwd, MAXSECRETLEN }, 00374 #endif 00375 00376 { "usehostname", o_bool, &usehostname, 00377 "Must use hostname for authentication", 1 }, 00378 00379 { "remotename", o_string, remote_name, 00380 "Set remote name for authentication", OPT_PRIO | OPT_STATIC, 00381 &explicit_remote, MAXNAMELEN }, 00382 00383 { "login", o_bool, &uselogin, 00384 "Use system password database for PAP", OPT_A2COPY | 1 , 00385 &session_mgmt }, 00386 { "enable-session", o_bool, &session_mgmt, 00387 "Enable session accounting for remote peers", OPT_PRIV | 1 }, 00388 00389 { "papcrypt", o_bool, &cryptpap, 00390 "PAP passwords are encrypted", 1 }, 00391 00392 { "privgroup", o_special, (void *)privgroup, 00393 "Allow group members to use privileged options", OPT_PRIV | OPT_A2LIST }, 00394 00395 { "allow-ip", o_special, (void *)set_noauth_addr, 00396 "Set IP address(es) which can be used without authentication", 00397 OPT_PRIV | OPT_A2LIST }, 00398 00399 { "remotenumber", o_string, remote_number, 00400 "Set remote telephone number for authentication", OPT_PRIO | OPT_STATIC, 00401 NULL, MAXNAMELEN }, 00402 00403 { "allow-number", o_special, (void *)set_permitted_number, 00404 "Set telephone number(s) which are allowed to connect", 00405 OPT_PRIV | OPT_A2LIST }, 00406 00407 { NULL } 00408 }; 00409 #endif /* PPP_OPTIONS */ 00410 00411 #if 0 /* UNUSED */ 00412 /* 00413 * setupapfile - specifies UPAP info for authenticating with peer. 00414 */ 00415 static int 00416 setupapfile(argv) 00417 char **argv; 00418 { 00419 FILE *ufile; 00420 int l; 00421 uid_t euid; 00422 char u[MAXNAMELEN], p[MAXSECRETLEN]; 00423 char *fname; 00424 00425 lcp_allowoptions[0].neg_upap = 1; 00426 00427 /* open user info file */ 00428 fname = strdup(*argv); 00429 if (fname == NULL) 00430 novm("+ua file name"); 00431 euid = geteuid(); 00432 if (seteuid(getuid()) == -1) { 00433 option_error("unable to reset uid before opening %s: %m", fname); 00434 return 0; 00435 } 00436 ufile = fopen(fname, "r"); 00437 if (seteuid(euid) == -1) 00438 fatal("unable to regain privileges: %m"); 00439 if (ufile == NULL) { 00440 option_error("unable to open user login data file %s", fname); 00441 return 0; 00442 } 00443 check_access(ufile, fname); 00444 uafname = fname; 00445 00446 /* get username */ 00447 if (fgets(u, MAXNAMELEN - 1, ufile) == NULL 00448 || fgets(p, MAXSECRETLEN - 1, ufile) == NULL) { 00449 fclose(ufile); 00450 option_error("unable to read user login data file %s", fname); 00451 return 0; 00452 } 00453 fclose(ufile); 00454 00455 /* get rid of newlines */ 00456 l = strlen(u); 00457 if (l > 0 && u[l-1] == '\n') 00458 u[l-1] = 0; 00459 l = strlen(p); 00460 if (l > 0 && p[l-1] == '\n') 00461 p[l-1] = 0; 00462 00463 if (override_value("user", option_priority, fname)) { 00464 strlcpy(ppp_settings.user, u, sizeof(ppp_settings.user)); 00465 explicit_user = 1; 00466 } 00467 if (override_value("passwd", option_priority, fname)) { 00468 strlcpy(ppp_settings.passwd, p, sizeof(ppp_settings.passwd)); 00469 explicit_passwd = 1; 00470 } 00471 00472 return (1); 00473 } 00474 00475 /* 00476 * privgroup - allow members of the group to have privileged access. 00477 */ 00478 static int 00479 privgroup(argv) 00480 char **argv; 00481 { 00482 struct group *g; 00483 int i; 00484 00485 g = getgrnam(*argv); 00486 if (g == 0) { 00487 option_error("group %s is unknown", *argv); 00488 return 0; 00489 } 00490 for (i = 0; i < ngroups; ++i) { 00491 if (groups[i] == g->gr_gid) { 00492 privileged = 1; 00493 break; 00494 } 00495 } 00496 return 1; 00497 } 00498 00499 00500 /* 00501 * set_noauth_addr - set address(es) that can be used without authentication. 00502 * Equivalent to specifying an entry like `"" * "" addr' in pap-secrets. 00503 */ 00504 static int 00505 set_noauth_addr(argv) 00506 char **argv; 00507 { 00508 char *addr = *argv; 00509 int l = strlen(addr) + 1; 00510 struct wordlist *wp; 00511 00512 wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l); 00513 if (wp == NULL) 00514 novm("allow-ip argument"); 00515 wp->word = (char *) (wp + 1); 00516 wp->next = noauth_addrs; 00517 MEMCPY(wp->word, addr, l); 00518 noauth_addrs = wp; 00519 return 1; 00520 } 00521 00522 00523 /* 00524 * set_permitted_number - set remote telephone number(s) that may connect. 00525 */ 00526 static int 00527 set_permitted_number(argv) 00528 char **argv; 00529 { 00530 char *number = *argv; 00531 int l = strlen(number) + 1; 00532 struct wordlist *wp; 00533 00534 wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l); 00535 if (wp == NULL) 00536 novm("allow-number argument"); 00537 wp->word = (char *) (wp + 1); 00538 wp->next = permitted_numbers; 00539 MEMCPY(wp->word, number, l); 00540 permitted_numbers = wp; 00541 return 1; 00542 } 00543 #endif 00544 00545 /* 00546 * An Open on LCP has requested a change from Dead to Establish phase. 00547 */ 00548 void link_required(ppp_pcb *pcb) { 00549 LWIP_UNUSED_ARG(pcb); 00550 } 00551 00552 #if 0 00553 /* 00554 * Bring the link up to the point of being able to do ppp. 00555 */ 00556 void start_link(unit) 00557 int unit; 00558 { 00559 ppp_pcb *pcb = &ppp_pcb_list[unit]; 00560 char *msg; 00561 00562 status = EXIT_NEGOTIATION_FAILED; 00563 new_phase(pcb, PPP_PHASE_SERIALCONN); 00564 00565 hungup = 0; 00566 devfd = the_channel->connect(); 00567 msg = "Connect script failed"; 00568 if (devfd < 0) 00569 goto fail; 00570 00571 /* set up the serial device as a ppp interface */ 00572 /* 00573 * N.B. we used to do tdb_writelock/tdb_writeunlock around this 00574 * (from establish_ppp to set_ifunit). However, we won't be 00575 * doing the set_ifunit in multilink mode, which is the only time 00576 * we need the atomicity that the tdb_writelock/tdb_writeunlock 00577 * gives us. Thus we don't need the tdb_writelock/tdb_writeunlock. 00578 */ 00579 fd_ppp = the_channel->establish_ppp(devfd); 00580 msg = "ppp establishment failed"; 00581 if (fd_ppp < 0) { 00582 status = EXIT_FATAL_ERROR; 00583 goto disconnect; 00584 } 00585 00586 if (!demand && ifunit >= 0) 00587 set_ifunit(1); 00588 00589 /* 00590 * Start opening the connection and wait for 00591 * incoming events (reply, timeout, etc.). 00592 */ 00593 if (ifunit >= 0) 00594 ppp_notice("Connect: %s <--> %s", ifname, ppp_devnam); 00595 else 00596 ppp_notice("Starting negotiation on %s", ppp_devnam); 00597 add_fd(fd_ppp); 00598 00599 new_phase(pcb, PPP_PHASE_ESTABLISH); 00600 00601 lcp_lowerup(pcb); 00602 return; 00603 00604 disconnect: 00605 new_phase(pcb, PPP_PHASE_DISCONNECT); 00606 if (the_channel->disconnect) 00607 the_channel->disconnect(); 00608 00609 fail: 00610 new_phase(pcb, PPP_PHASE_DEAD); 00611 if (the_channel->cleanup) 00612 (*the_channel->cleanup)(); 00613 } 00614 #endif 00615 00616 /* 00617 * LCP has terminated the link; go to the Dead phase and take the 00618 * physical layer down. 00619 */ 00620 void link_terminated(ppp_pcb *pcb) { 00621 if (pcb->phase == PPP_PHASE_DEAD 00622 #ifdef HAVE_MULTILINK 00623 || pcb->phase == PPP_PHASE_MASTER 00624 #endif /* HAVE_MULTILINK */ 00625 ) 00626 return; 00627 new_phase(pcb, PPP_PHASE_DISCONNECT); 00628 00629 #if 0 /* UNUSED */ 00630 if (pap_logout_hook) { 00631 pap_logout_hook(); 00632 } 00633 session_end(devnam); 00634 #endif /* UNUSED */ 00635 00636 if (!doing_multilink) { 00637 ppp_notice("Connection terminated."); 00638 #if PPP_STATS_SUPPORT 00639 print_link_stats(); 00640 #endif /* PPP_STATS_SUPPORT */ 00641 } else 00642 ppp_notice("Link terminated."); 00643 00644 lcp_lowerdown(pcb); 00645 00646 ppp_link_terminated(pcb); 00647 #if 0 00648 /* 00649 * Delete pid files before disestablishing ppp. Otherwise it 00650 * can happen that another pppd gets the same unit and then 00651 * we delete its pid file. 00652 */ 00653 if (!doing_multilink && !demand) 00654 remove_pidfiles(); 00655 00656 /* 00657 * If we may want to bring the link up again, transfer 00658 * the ppp unit back to the loopback. Set the 00659 * real serial device back to its normal mode of operation. 00660 */ 00661 if (fd_ppp >= 0) { 00662 remove_fd(fd_ppp); 00663 clean_check(); 00664 the_channel->disestablish_ppp(devfd); 00665 if (doing_multilink) 00666 mp_exit_bundle(); 00667 fd_ppp = -1; 00668 } 00669 if (!hungup) 00670 lcp_lowerdown(pcb); 00671 if (!doing_multilink && !demand) 00672 script_unsetenv("IFNAME"); 00673 00674 /* 00675 * Run disconnector script, if requested. 00676 * XXX we may not be able to do this if the line has hung up! 00677 */ 00678 if (devfd >= 0 && the_channel->disconnect) { 00679 the_channel->disconnect(); 00680 devfd = -1; 00681 } 00682 if (the_channel->cleanup) 00683 (*the_channel->cleanup)(); 00684 00685 if (doing_multilink && multilink_master) { 00686 if (!bundle_terminating) 00687 new_phase(pcb, PPP_PHASE_MASTER); 00688 else 00689 mp_bundle_terminated(); 00690 } else 00691 new_phase(pcb, PPP_PHASE_DEAD); 00692 #endif 00693 } 00694 00695 /* 00696 * LCP has gone down; it will either die or try to re-establish. 00697 */ 00698 void link_down(ppp_pcb *pcb) { 00699 #if PPP_NOTIFY 00700 notify(link_down_notifier, 0); 00701 #endif /* PPP_NOTIFY */ 00702 00703 if (!doing_multilink) { 00704 upper_layers_down(pcb); 00705 if (pcb->phase != PPP_PHASE_DEAD 00706 #ifdef HAVE_MULTILINK 00707 && pcb->phase != PPP_PHASE_MASTER 00708 #endif /* HAVE_MULTILINK */ 00709 ) 00710 new_phase(pcb, PPP_PHASE_ESTABLISH); 00711 } 00712 /* XXX if doing_multilink, should do something to stop 00713 network-layer traffic on the link */ 00714 } 00715 00716 void upper_layers_down(ppp_pcb *pcb) { 00717 int i; 00718 const struct protent *protp; 00719 00720 for (i = 0; (protp = protocols[i]) != NULL; ++i) { 00721 if (protp->protocol != PPP_LCP && protp->lowerdown != NULL) 00722 (*protp->lowerdown)(pcb); 00723 if (protp->protocol < 0xC000 && protp->close != NULL) 00724 (*protp->close)(pcb, "LCP down"); 00725 } 00726 pcb->num_np_open = 0; 00727 pcb->num_np_up = 0; 00728 } 00729 00730 /* 00731 * The link is established. 00732 * Proceed to the Dead, Authenticate or Network phase as appropriate. 00733 */ 00734 void link_established(ppp_pcb *pcb) { 00735 #if PPP_AUTH_SUPPORT 00736 int auth; 00737 #if PPP_SERVER 00738 #if PAP_SUPPORT 00739 lcp_options *wo = &pcb->lcp_wantoptions; 00740 #endif /* PAP_SUPPORT */ 00741 lcp_options *go = &pcb->lcp_gotoptions; 00742 #endif /* PPP_SERVER */ 00743 lcp_options *ho = &pcb->lcp_hisoptions; 00744 #endif /* PPP_AUTH_SUPPORT */ 00745 int i; 00746 const struct protent *protp; 00747 00748 /* 00749 * Tell higher-level protocols that LCP is up. 00750 */ 00751 if (!doing_multilink) { 00752 for (i = 0; (protp = protocols[i]) != NULL; ++i) 00753 if (protp->protocol != PPP_LCP 00754 && protp->lowerup != NULL) 00755 (*protp->lowerup)(pcb); 00756 } 00757 00758 #if PPP_AUTH_SUPPORT 00759 #if PPP_SERVER 00760 #if PPP_ALLOWED_ADDRS 00761 if (!auth_required && noauth_addrs != NULL) 00762 set_allowed_addrs(unit, NULL, NULL); 00763 #endif /* PPP_ALLOWED_ADDRS */ 00764 00765 if (pcb->settings.auth_required && !(0 00766 #if PAP_SUPPORT 00767 || go->neg_upap 00768 #endif /* PAP_SUPPORT */ 00769 #if CHAP_SUPPORT 00770 || go->neg_chap 00771 #endif /* CHAP_SUPPORT */ 00772 #if EAP_SUPPORT 00773 || go->neg_eap 00774 #endif /* EAP_SUPPORT */ 00775 )) { 00776 00777 #if PPP_ALLOWED_ADDRS 00778 /* 00779 * We wanted the peer to authenticate itself, and it refused: 00780 * if we have some address(es) it can use without auth, fine, 00781 * otherwise treat it as though it authenticated with PAP using 00782 * a username of "" and a password of "". If that's not OK, 00783 * boot it out. 00784 */ 00785 if (noauth_addrs != NULL) { 00786 set_allowed_addrs(unit, NULL, NULL); 00787 } else 00788 #endif /* PPP_ALLOWED_ADDRS */ 00789 if (!pcb->settings.null_login 00790 #if PAP_SUPPORT 00791 || !wo->neg_upap 00792 #endif /* PAP_SUPPORT */ 00793 ) { 00794 ppp_warn("peer refused to authenticate: terminating link"); 00795 #if 0 /* UNUSED */ 00796 status = EXIT_PEER_AUTH_FAILED; 00797 #endif /* UNUSED */ 00798 pcb->err_code = PPPERR_AUTHFAIL; 00799 lcp_close(pcb, "peer refused to authenticate"); 00800 return; 00801 } 00802 } 00803 #endif /* PPP_SERVER */ 00804 00805 new_phase(pcb, PPP_PHASE_AUTHENTICATE); 00806 auth = 0; 00807 #if PPP_SERVER 00808 #if EAP_SUPPORT 00809 if (go->neg_eap) { 00810 eap_authpeer(pcb, PPP_OUR_NAME); 00811 auth |= EAP_PEER; 00812 } else 00813 #endif /* EAP_SUPPORT */ 00814 #if CHAP_SUPPORT 00815 if (go->neg_chap) { 00816 chap_auth_peer(pcb, PPP_OUR_NAME, CHAP_DIGEST(go->chap_mdtype)); 00817 auth |= CHAP_PEER; 00818 } else 00819 #endif /* CHAP_SUPPORT */ 00820 #if PAP_SUPPORT 00821 if (go->neg_upap) { 00822 upap_authpeer(pcb); 00823 auth |= PAP_PEER; 00824 } else 00825 #endif /* PAP_SUPPORT */ 00826 {} 00827 #endif /* PPP_SERVER */ 00828 00829 #if EAP_SUPPORT 00830 if (ho->neg_eap) { 00831 eap_authwithpeer(pcb, pcb->settings.user); 00832 auth |= EAP_WITHPEER; 00833 } else 00834 #endif /* EAP_SUPPORT */ 00835 #if CHAP_SUPPORT 00836 if (ho->neg_chap) { 00837 chap_auth_with_peer(pcb, pcb->settings.user, CHAP_DIGEST(ho->chap_mdtype)); 00838 auth |= CHAP_WITHPEER; 00839 } else 00840 #endif /* CHAP_SUPPORT */ 00841 #if PAP_SUPPORT 00842 if (ho->neg_upap) { 00843 upap_authwithpeer(pcb, pcb->settings.user, pcb->settings.passwd); 00844 auth |= PAP_WITHPEER; 00845 } else 00846 #endif /* PAP_SUPPORT */ 00847 {} 00848 00849 pcb->auth_pending = auth; 00850 pcb->auth_done = 0; 00851 00852 if (!auth) 00853 #endif /* PPP_AUTH_SUPPORT */ 00854 network_phase(pcb); 00855 } 00856 00857 /* 00858 * Proceed to the network phase. 00859 */ 00860 static void network_phase(ppp_pcb *pcb) { 00861 #if CBCP_SUPPORT 00862 ppp_pcb *pcb = &ppp_pcb_list[unit]; 00863 #endif 00864 #if 0 /* UNUSED */ 00865 lcp_options *go = &lcp_gotoptions[unit]; 00866 #endif /* UNUSED */ 00867 00868 #if 0 /* UNUSED */ 00869 /* Log calling number. */ 00870 if (*remote_number) 00871 ppp_notice("peer from calling number %q authorized", remote_number); 00872 #endif /* UNUSED */ 00873 00874 #if PPP_NOTIFY 00875 /* 00876 * If the peer had to authenticate, notify it now. 00877 */ 00878 if (0 00879 #if CHAP_SUPPORT 00880 || go->neg_chap 00881 #endif /* CHAP_SUPPORT */ 00882 #if PAP_SUPPORT 00883 || go->neg_upap 00884 #endif /* PAP_SUPPORT */ 00885 #if EAP_SUPPORT 00886 || go->neg_eap 00887 #endif /* EAP_SUPPORT */ 00888 ) { 00889 notify(auth_up_notifier, 0); 00890 } 00891 #endif /* PPP_NOTIFY */ 00892 00893 #if CBCP_SUPPORT 00894 /* 00895 * If we negotiated callback, do it now. 00896 */ 00897 if (go->neg_cbcp) { 00898 new_phase(pcb, PPP_PHASE_CALLBACK); 00899 (*cbcp_protent.open)(pcb); 00900 return; 00901 } 00902 #endif 00903 00904 #if PPP_OPTIONS 00905 /* 00906 * Process extra options from the secrets file 00907 */ 00908 if (extra_options) { 00909 options_from_list(extra_options, 1); 00910 free_wordlist(extra_options); 00911 extra_options = 0; 00912 } 00913 #endif /* PPP_OPTIONS */ 00914 start_networks(pcb); 00915 } 00916 00917 void start_networks(ppp_pcb *pcb) { 00918 #if CCP_SUPPORT || ECP_SUPPORT 00919 int i; 00920 const struct protent *protp; 00921 #endif /* CCP_SUPPORT || ECP_SUPPORT */ 00922 00923 new_phase(pcb, PPP_PHASE_NETWORK); 00924 00925 #ifdef HAVE_MULTILINK 00926 if (multilink) { 00927 if (mp_join_bundle()) { 00928 if (multilink_join_hook) 00929 (*multilink_join_hook)(); 00930 if (updetach && !nodetach) 00931 detach(); 00932 return; 00933 } 00934 } 00935 #endif /* HAVE_MULTILINK */ 00936 00937 #ifdef PPP_FILTER 00938 if (!demand) 00939 set_filters(&pass_filter, &active_filter); 00940 #endif 00941 #if CCP_SUPPORT || ECP_SUPPORT 00942 /* Start CCP and ECP */ 00943 for (i = 0; (protp = protocols[i]) != NULL; ++i) 00944 if ( 00945 (0 00946 #if ECP_SUPPORT 00947 || protp->protocol == PPP_ECP 00948 #endif /* ECP_SUPPORT */ 00949 #if CCP_SUPPORT 00950 || protp->protocol == PPP_CCP 00951 #endif /* CCP_SUPPORT */ 00952 ) 00953 && protp->open != NULL) 00954 (*protp->open)(pcb); 00955 #endif /* CCP_SUPPORT || ECP_SUPPORT */ 00956 00957 /* 00958 * Bring up other network protocols iff encryption is not required. 00959 */ 00960 if (1 00961 #if ECP_SUPPORT 00962 && !ecp_gotoptions[unit].required 00963 #endif /* ECP_SUPPORT */ 00964 #if MPPE_SUPPORT 00965 && !pcb->ccp_gotoptions.mppe 00966 #endif /* MPPE_SUPPORT */ 00967 ) 00968 continue_networks(pcb); 00969 } 00970 00971 void continue_networks(ppp_pcb *pcb) { 00972 int i; 00973 const struct protent *protp; 00974 00975 /* 00976 * Start the "real" network protocols. 00977 */ 00978 for (i = 0; (protp = protocols[i]) != NULL; ++i) 00979 if (protp->protocol < 0xC000 00980 #if CCP_SUPPORT 00981 && protp->protocol != PPP_CCP 00982 #endif /* CCP_SUPPORT */ 00983 #if ECP_SUPPORT 00984 && protp->protocol != PPP_ECP 00985 #endif /* ECP_SUPPORT */ 00986 && protp->open != NULL) { 00987 (*protp->open)(pcb); 00988 ++pcb->num_np_open; 00989 } 00990 00991 if (pcb->num_np_open == 0) 00992 /* nothing to do */ 00993 lcp_close(pcb, "No network protocols running"); 00994 } 00995 00996 #if PPP_AUTH_SUPPORT 00997 #if PPP_SERVER 00998 /* 00999 * auth_check_passwd - Check the user name and passwd against configuration. 01000 * 01001 * returns: 01002 * 0: Authentication failed. 01003 * 1: Authentication succeeded. 01004 * In either case, msg points to an appropriate message and msglen to the message len. 01005 */ 01006 int auth_check_passwd(ppp_pcb *pcb, char *auser, int userlen, char *apasswd, int passwdlen, const char **msg, int *msglen) { 01007 int secretuserlen; 01008 int secretpasswdlen; 01009 01010 if (pcb->settings.user && pcb->settings.passwd) { 01011 secretuserlen = (int)strlen(pcb->settings.user); 01012 secretpasswdlen = (int)strlen(pcb->settings.passwd); 01013 if (secretuserlen == userlen 01014 && secretpasswdlen == passwdlen 01015 && !memcmp(auser, pcb->settings.user, userlen) 01016 && !memcmp(apasswd, pcb->settings.passwd, passwdlen) ) { 01017 *msg = "Login ok"; 01018 *msglen = sizeof("Login ok")-1; 01019 return 1; 01020 } 01021 } 01022 01023 *msg = "Login incorrect"; 01024 *msglen = sizeof("Login incorrect")-1; 01025 return 0; 01026 } 01027 01028 /* 01029 * The peer has failed to authenticate himself using `protocol'. 01030 */ 01031 void auth_peer_fail(ppp_pcb *pcb, int protocol) { 01032 LWIP_UNUSED_ARG(protocol); 01033 /* 01034 * Authentication failure: take the link down 01035 */ 01036 #if 0 /* UNUSED */ 01037 status = EXIT_PEER_AUTH_FAILED; 01038 #endif /* UNUSED */ 01039 pcb->err_code = PPPERR_AUTHFAIL; 01040 lcp_close(pcb, "Authentication failed"); 01041 } 01042 01043 /* 01044 * The peer has been successfully authenticated using `protocol'. 01045 */ 01046 void auth_peer_success(ppp_pcb *pcb, int protocol, int prot_flavor, const char *name, int namelen) { 01047 int bit; 01048 #ifndef HAVE_MULTILINK 01049 LWIP_UNUSED_ARG(name); 01050 LWIP_UNUSED_ARG(namelen); 01051 #endif /* HAVE_MULTILINK */ 01052 01053 switch (protocol) { 01054 #if CHAP_SUPPORT 01055 case PPP_CHAP: 01056 bit = CHAP_PEER; 01057 switch (prot_flavor) { 01058 case CHAP_MD5: 01059 bit |= CHAP_MD5_PEER; 01060 break; 01061 #if MSCHAP_SUPPORT 01062 case CHAP_MICROSOFT: 01063 bit |= CHAP_MS_PEER; 01064 break; 01065 case CHAP_MICROSOFT_V2: 01066 bit |= CHAP_MS2_PEER; 01067 break; 01068 #endif /* MSCHAP_SUPPORT */ 01069 default: 01070 break; 01071 } 01072 break; 01073 #endif /* CHAP_SUPPORT */ 01074 #if PAP_SUPPORT 01075 case PPP_PAP: 01076 bit = PAP_PEER; 01077 break; 01078 #endif /* PAP_SUPPORT */ 01079 #if EAP_SUPPORT 01080 case PPP_EAP: 01081 bit = EAP_PEER; 01082 break; 01083 #endif /* EAP_SUPPORT */ 01084 default: 01085 ppp_warn("auth_peer_success: unknown protocol %x", protocol); 01086 return; 01087 } 01088 01089 #ifdef HAVE_MULTILINK 01090 /* 01091 * Save the authenticated name of the peer for later. 01092 */ 01093 if (namelen > (int)sizeof(pcb->peer_authname) - 1) 01094 namelen = (int)sizeof(pcb->peer_authname) - 1; 01095 MEMCPY(pcb->peer_authname, name, namelen); 01096 pcb->peer_authname[namelen] = 0; 01097 #endif /* HAVE_MULTILINK */ 01098 #if 0 /* UNUSED */ 01099 script_setenv("PEERNAME", , 0); 01100 #endif /* UNUSED */ 01101 01102 /* Save the authentication method for later. */ 01103 pcb->auth_done |= bit; 01104 01105 /* 01106 * If there is no more authentication still to be done, 01107 * proceed to the network (or callback) phase. 01108 */ 01109 if ((pcb->auth_pending &= ~bit) == 0) 01110 network_phase(pcb); 01111 } 01112 #endif /* PPP_SERVER */ 01113 01114 /* 01115 * We have failed to authenticate ourselves to the peer using `protocol'. 01116 */ 01117 void auth_withpeer_fail(ppp_pcb *pcb, int protocol) { 01118 LWIP_UNUSED_ARG(protocol); 01119 /* 01120 * We've failed to authenticate ourselves to our peer. 01121 * 01122 * Some servers keep sending CHAP challenges, but there 01123 * is no point in persisting without any way to get updated 01124 * authentication secrets. 01125 * 01126 * He'll probably take the link down, and there's not much 01127 * we can do except wait for that. 01128 */ 01129 pcb->err_code = PPPERR_AUTHFAIL; 01130 lcp_close(pcb, "Failed to authenticate ourselves to peer"); 01131 } 01132 01133 /* 01134 * We have successfully authenticated ourselves with the peer using `protocol'. 01135 */ 01136 void auth_withpeer_success(ppp_pcb *pcb, int protocol, int prot_flavor) { 01137 int bit; 01138 const char *prot = ""; 01139 01140 switch (protocol) { 01141 #if CHAP_SUPPORT 01142 case PPP_CHAP: 01143 bit = CHAP_WITHPEER; 01144 prot = "CHAP"; 01145 switch (prot_flavor) { 01146 case CHAP_MD5: 01147 bit |= CHAP_MD5_WITHPEER; 01148 break; 01149 #if MSCHAP_SUPPORT 01150 case CHAP_MICROSOFT: 01151 bit |= CHAP_MS_WITHPEER; 01152 break; 01153 case CHAP_MICROSOFT_V2: 01154 bit |= CHAP_MS2_WITHPEER; 01155 break; 01156 #endif /* MSCHAP_SUPPORT */ 01157 default: 01158 break; 01159 } 01160 break; 01161 #endif /* CHAP_SUPPORT */ 01162 #if PAP_SUPPORT 01163 case PPP_PAP: 01164 bit = PAP_WITHPEER; 01165 prot = "PAP"; 01166 break; 01167 #endif /* PAP_SUPPORT */ 01168 #if EAP_SUPPORT 01169 case PPP_EAP: 01170 bit = EAP_WITHPEER; 01171 prot = "EAP"; 01172 break; 01173 #endif /* EAP_SUPPORT */ 01174 default: 01175 ppp_warn("auth_withpeer_success: unknown protocol %x", protocol); 01176 bit = 0; 01177 /* no break */ 01178 } 01179 01180 ppp_notice("%s authentication succeeded", prot); 01181 01182 /* Save the authentication method for later. */ 01183 pcb->auth_done |= bit; 01184 01185 /* 01186 * If there is no more authentication still being done, 01187 * proceed to the network (or callback) phase. 01188 */ 01189 if ((pcb->auth_pending &= ~bit) == 0) 01190 network_phase(pcb); 01191 } 01192 #endif /* PPP_AUTH_SUPPORT */ 01193 01194 01195 /* 01196 * np_up - a network protocol has come up. 01197 */ 01198 void np_up(ppp_pcb *pcb, int proto) { 01199 #if PPP_IDLETIMELIMIT 01200 int tlim; 01201 #endif /* PPP_IDLETIMELIMIT */ 01202 LWIP_UNUSED_ARG(proto); 01203 01204 if (pcb->num_np_up == 0) { 01205 /* 01206 * At this point we consider that the link has come up successfully. 01207 */ 01208 new_phase(pcb, PPP_PHASE_RUNNING); 01209 01210 #if PPP_IDLETIMELIMIT 01211 #if 0 /* UNUSED */ 01212 if (idle_time_hook != 0) 01213 tlim = (*idle_time_hook)(NULL); 01214 else 01215 #endif /* UNUSED */ 01216 tlim = pcb->settings.idle_time_limit; 01217 if (tlim > 0) 01218 TIMEOUT(check_idle, (void*)pcb, tlim); 01219 #endif /* PPP_IDLETIMELIMIT */ 01220 01221 #if PPP_MAXCONNECT 01222 /* 01223 * Set a timeout to close the connection once the maximum 01224 * connect time has expired. 01225 */ 01226 if (pcb->settings.maxconnect > 0) 01227 TIMEOUT(connect_time_expired, (void*)pcb, pcb->settings.maxconnect); 01228 #endif /* PPP_MAXCONNECT */ 01229 01230 #ifdef MAXOCTETS 01231 if (maxoctets > 0) 01232 TIMEOUT(check_maxoctets, NULL, maxoctets_timeout); 01233 #endif 01234 01235 #if 0 /* Unused */ 01236 /* 01237 * Detach now, if the updetach option was given. 01238 */ 01239 if (updetach && !nodetach) 01240 detach(); 01241 #endif /* Unused */ 01242 } 01243 ++pcb->num_np_up; 01244 } 01245 01246 /* 01247 * np_down - a network protocol has gone down. 01248 */ 01249 void np_down(ppp_pcb *pcb, int proto) { 01250 LWIP_UNUSED_ARG(proto); 01251 if (--pcb->num_np_up == 0) { 01252 #if PPP_IDLETIMELIMIT 01253 UNTIMEOUT(check_idle, (void*)pcb); 01254 #endif /* PPP_IDLETIMELIMIT */ 01255 #if PPP_MAXCONNECT 01256 UNTIMEOUT(connect_time_expired, NULL); 01257 #endif /* PPP_MAXCONNECT */ 01258 #ifdef MAXOCTETS 01259 UNTIMEOUT(check_maxoctets, NULL); 01260 #endif 01261 new_phase(pcb, PPP_PHASE_NETWORK); 01262 } 01263 } 01264 01265 /* 01266 * np_finished - a network protocol has finished using the link. 01267 */ 01268 void np_finished(ppp_pcb *pcb, int proto) { 01269 LWIP_UNUSED_ARG(proto); 01270 if (--pcb->num_np_open <= 0) { 01271 /* no further use for the link: shut up shop. */ 01272 lcp_close(pcb, "No network protocols running"); 01273 } 01274 } 01275 01276 #ifdef MAXOCTETS 01277 static void 01278 check_maxoctets(arg) 01279 void *arg; 01280 { 01281 #if PPP_STATS_SUPPORT 01282 unsigned int used; 01283 01284 update_link_stats(ifunit); 01285 link_stats_valid=0; 01286 01287 switch(maxoctets_dir) { 01288 case PPP_OCTETS_DIRECTION_IN: 01289 used = link_stats.bytes_in; 01290 break; 01291 case PPP_OCTETS_DIRECTION_OUT: 01292 used = link_stats.bytes_out; 01293 break; 01294 case PPP_OCTETS_DIRECTION_MAXOVERAL: 01295 case PPP_OCTETS_DIRECTION_MAXSESSION: 01296 used = (link_stats.bytes_in > link_stats.bytes_out) ? link_stats.bytes_in : link_stats.bytes_out; 01297 break; 01298 default: 01299 used = link_stats.bytes_in+link_stats.bytes_out; 01300 break; 01301 } 01302 if (used > maxoctets) { 01303 ppp_notice("Traffic limit reached. Limit: %u Used: %u", maxoctets, used); 01304 status = EXIT_TRAFFIC_LIMIT; 01305 lcp_close(pcb, "Traffic limit"); 01306 #if 0 /* UNUSED */ 01307 need_holdoff = 0; 01308 #endif /* UNUSED */ 01309 } else { 01310 TIMEOUT(check_maxoctets, NULL, maxoctets_timeout); 01311 } 01312 #endif /* PPP_STATS_SUPPORT */ 01313 } 01314 #endif /* MAXOCTETS */ 01315 01316 #if PPP_IDLETIMELIMIT 01317 /* 01318 * check_idle - check whether the link has been idle for long 01319 * enough that we can shut it down. 01320 */ 01321 static void check_idle(void *arg) { 01322 ppp_pcb *pcb = (ppp_pcb*)arg; 01323 struct ppp_idle idle; 01324 time_t itime; 01325 int tlim; 01326 01327 if (!get_idle_time(pcb, &idle)) 01328 return; 01329 #if 0 /* UNUSED */ 01330 if (idle_time_hook != 0) { 01331 tlim = idle_time_hook(&idle); 01332 } else { 01333 #endif /* UNUSED */ 01334 itime = LWIP_MIN(idle.xmit_idle, idle.recv_idle); 01335 tlim = pcb->settings.idle_time_limit - itime; 01336 #if 0 /* UNUSED */ 01337 } 01338 #endif /* UNUSED */ 01339 if (tlim <= 0) { 01340 /* link is idle: shut it down. */ 01341 ppp_notice("Terminating connection due to lack of activity."); 01342 pcb->err_code = PPPERR_IDLETIMEOUT; 01343 lcp_close(pcb, "Link inactive"); 01344 #if 0 /* UNUSED */ 01345 need_holdoff = 0; 01346 #endif /* UNUSED */ 01347 } else { 01348 TIMEOUT(check_idle, (void*)pcb, tlim); 01349 } 01350 } 01351 #endif /* PPP_IDLETIMELIMIT */ 01352 01353 #if PPP_MAXCONNECT 01354 /* 01355 * connect_time_expired - log a message and close the connection. 01356 */ 01357 static void connect_time_expired(void *arg) { 01358 ppp_pcb *pcb = (ppp_pcb*)arg; 01359 ppp_info("Connect time expired"); 01360 pcb->err_code = PPPERR_CONNECTTIME; 01361 lcp_close(pcb, "Connect time expired"); /* Close connection */ 01362 } 01363 #endif /* PPP_MAXCONNECT */ 01364 01365 #if PPP_OPTIONS 01366 /* 01367 * auth_check_options - called to check authentication options. 01368 */ 01369 void 01370 auth_check_options() 01371 { 01372 lcp_options *wo = &lcp_wantoptions[0]; 01373 int can_auth; 01374 int lacks_ip; 01375 01376 /* Default our_name to hostname, and user to our_name */ 01377 if (our_name[0] == 0 || usehostname) 01378 strlcpy(our_name, hostname, sizeof(our_name)); 01379 /* If a blank username was explicitly given as an option, trust 01380 the user and don't use our_name */ 01381 if (ppp_settings.user[0] == 0 && !explicit_user) 01382 strlcpy(ppp_settings.user, our_name, sizeof(ppp_settings.user)); 01383 01384 /* 01385 * If we have a default route, require the peer to authenticate 01386 * unless the noauth option was given or the real user is root. 01387 */ 01388 if (!auth_required && !allow_any_ip && have_route_to(0) && !privileged) { 01389 auth_required = 1; 01390 default_auth = 1; 01391 } 01392 01393 #if CHAP_SUPPORT 01394 /* If we selected any CHAP flavors, we should probably negotiate it. :-) */ 01395 if (wo->chap_mdtype) 01396 wo->neg_chap = 1; 01397 #endif /* CHAP_SUPPORT */ 01398 01399 /* If authentication is required, ask peer for CHAP, PAP, or EAP. */ 01400 if (auth_required) { 01401 allow_any_ip = 0; 01402 if (1 01403 #if CHAP_SUPPORT 01404 && !wo->neg_chap 01405 #endif /* CHAP_SUPPORT */ 01406 #if PAP_SUPPORT 01407 && !wo->neg_upap 01408 #endif /* PAP_SUPPORT */ 01409 #if EAP_SUPPORT 01410 && !wo->neg_eap 01411 #endif /* EAP_SUPPORT */ 01412 ) { 01413 #if CHAP_SUPPORT 01414 wo->neg_chap = CHAP_MDTYPE_SUPPORTED != MDTYPE_NONE; 01415 wo->chap_mdtype = CHAP_MDTYPE_SUPPORTED; 01416 #endif /* CHAP_SUPPORT */ 01417 #if PAP_SUPPORT 01418 wo->neg_upap = 1; 01419 #endif /* PAP_SUPPORT */ 01420 #if EAP_SUPPORT 01421 wo->neg_eap = 1; 01422 #endif /* EAP_SUPPORT */ 01423 } 01424 } else { 01425 #if CHAP_SUPPORT 01426 wo->neg_chap = 0; 01427 wo->chap_mdtype = MDTYPE_NONE; 01428 #endif /* CHAP_SUPPORT */ 01429 #if PAP_SUPPORT 01430 wo->neg_upap = 0; 01431 #endif /* PAP_SUPPORT */ 01432 #if EAP_SUPPORT 01433 wo->neg_eap = 0; 01434 #endif /* EAP_SUPPORT */ 01435 } 01436 01437 /* 01438 * Check whether we have appropriate secrets to use 01439 * to authenticate the peer. Note that EAP can authenticate by way 01440 * of a CHAP-like exchanges as well as SRP. 01441 */ 01442 lacks_ip = 0; 01443 #if PAP_SUPPORT 01444 can_auth = wo->neg_upap && (uselogin || have_pap_secret(&lacks_ip)); 01445 #else 01446 can_auth = 0; 01447 #endif /* PAP_SUPPORT */ 01448 if (!can_auth && (0 01449 #if CHAP_SUPPORT 01450 || wo->neg_chap 01451 #endif /* CHAP_SUPPORT */ 01452 #if EAP_SUPPORT 01453 || wo->neg_eap 01454 #endif /* EAP_SUPPORT */ 01455 )) { 01456 #if CHAP_SUPPORT 01457 can_auth = have_chap_secret((explicit_remote? remote_name: NULL), 01458 our_name, 1, &lacks_ip); 01459 #else 01460 can_auth = 0; 01461 #endif 01462 } 01463 if (!can_auth 01464 #if EAP_SUPPORT 01465 && wo->neg_eap 01466 #endif /* EAP_SUPPORT */ 01467 ) { 01468 can_auth = have_srp_secret((explicit_remote? remote_name: NULL), 01469 our_name, 1, &lacks_ip); 01470 } 01471 01472 if (auth_required && !can_auth && noauth_addrs == NULL) { 01473 if (default_auth) { 01474 option_error( 01475 "By default the remote system is required to authenticate itself"); 01476 option_error( 01477 "(because this system has a default route to the internet)"); 01478 } else if (explicit_remote) 01479 option_error( 01480 "The remote system (%s) is required to authenticate itself", 01481 remote_name); 01482 else 01483 option_error( 01484 "The remote system is required to authenticate itself"); 01485 option_error( 01486 "but I couldn't find any suitable secret (password) for it to use to do so."); 01487 if (lacks_ip) 01488 option_error( 01489 "(None of the available passwords would let it use an IP address.)"); 01490 01491 exit(1); 01492 } 01493 01494 /* 01495 * Early check for remote number authorization. 01496 */ 01497 if (!auth_number()) { 01498 ppp_warn("calling number %q is not authorized", remote_number); 01499 exit(EXIT_CNID_AUTH_FAILED); 01500 } 01501 } 01502 #endif /* PPP_OPTIONS */ 01503 01504 #if 0 /* UNUSED */ 01505 /* 01506 * auth_reset - called when LCP is starting negotiations to recheck 01507 * authentication options, i.e. whether we have appropriate secrets 01508 * to use for authenticating ourselves and/or the peer. 01509 */ 01510 void 01511 auth_reset(unit) 01512 int unit; 01513 { 01514 lcp_options *go = &lcp_gotoptions[unit]; 01515 lcp_options *ao = &lcp_allowoptions[unit]; 01516 int hadchap; 01517 01518 hadchap = -1; 01519 ao->neg_upap = !refuse_pap && (passwd[0] != 0 || get_pap_passwd(NULL)); 01520 ao->neg_chap = (!refuse_chap || !refuse_mschap || !refuse_mschap_v2) 01521 && (passwd[0] != 0 || 01522 (hadchap = have_chap_secret(user, (explicit_remote? remote_name: 01523 NULL), 0, NULL))); 01524 ao->neg_eap = !refuse_eap && ( 01525 passwd[0] != 0 || 01526 (hadchap == 1 || (hadchap == -1 && have_chap_secret(user, 01527 (explicit_remote? remote_name: NULL), 0, NULL))) || 01528 have_srp_secret(user, (explicit_remote? remote_name: NULL), 0, NULL)); 01529 01530 hadchap = -1; 01531 if (go->neg_upap && !uselogin && !have_pap_secret(NULL)) 01532 go->neg_upap = 0; 01533 if (go->neg_chap) { 01534 if (!(hadchap = have_chap_secret((explicit_remote? remote_name: NULL), 01535 our_name, 1, NULL))) 01536 go->neg_chap = 0; 01537 } 01538 if (go->neg_eap && 01539 (hadchap == 0 || (hadchap == -1 && 01540 !have_chap_secret((explicit_remote? remote_name: NULL), our_name, 01541 1, NULL))) && 01542 !have_srp_secret((explicit_remote? remote_name: NULL), our_name, 1, 01543 NULL)) 01544 go->neg_eap = 0; 01545 } 01546 01547 /* 01548 * check_passwd - Check the user name and passwd against the PAP secrets 01549 * file. If requested, also check against the system password database, 01550 * and login the user if OK. 01551 * 01552 * returns: 01553 * UPAP_AUTHNAK: Authentication failed. 01554 * UPAP_AUTHACK: Authentication succeeded. 01555 * In either case, msg points to an appropriate message. 01556 */ 01557 int 01558 check_passwd(unit, auser, userlen, apasswd, passwdlen, msg) 01559 int unit; 01560 char *auser; 01561 int userlen; 01562 char *apasswd; 01563 int passwdlen; 01564 char **msg; 01565 { 01566 return UPAP_AUTHNAK; 01567 int ret; 01568 char *filename; 01569 FILE *f; 01570 struct wordlist *addrs = NULL, *opts = NULL; 01571 char passwd[256], user[256]; 01572 char secret[MAXWORDLEN]; 01573 static int attempts = 0; 01574 01575 /* 01576 * Make copies of apasswd and auser, then null-terminate them. 01577 * If there are unprintable characters in the password, make 01578 * them visible. 01579 */ 01580 slprintf(ppp_settings.passwd, sizeof(ppp_settings.passwd), "%.*v", passwdlen, apasswd); 01581 slprintf(ppp_settings.user, sizeof(ppp_settings.user), "%.*v", userlen, auser); 01582 *msg = ""; 01583 01584 /* 01585 * Check if a plugin wants to handle this. 01586 */ 01587 if (pap_auth_hook) { 01588 ret = (*pap_auth_hook)(ppp_settings.user, ppp_settings.passwd, msg, &addrs, &opts); 01589 if (ret >= 0) { 01590 /* note: set_allowed_addrs() saves opts (but not addrs): 01591 don't free it! */ 01592 if (ret) 01593 set_allowed_addrs(unit, addrs, opts); 01594 else if (opts != 0) 01595 free_wordlist(opts); 01596 if (addrs != 0) 01597 free_wordlist(addrs); 01598 BZERO(ppp_settings.passwd, sizeof(ppp_settings.passwd)); 01599 return ret? UPAP_AUTHACK: UPAP_AUTHNAK; 01600 } 01601 } 01602 01603 /* 01604 * Open the file of pap secrets and scan for a suitable secret 01605 * for authenticating this user. 01606 */ 01607 filename = _PATH_UPAPFILE; 01608 addrs = opts = NULL; 01609 ret = UPAP_AUTHNAK; 01610 f = fopen(filename, "r"); 01611 if (f == NULL) { 01612 ppp_error("Can't open PAP password file %s: %m", filename); 01613 01614 } else { 01615 check_access(f, filename); 01616 if (scan_authfile(f, ppp_settings.user, our_name, secret, &addrs, &opts, filename, 0) < 0) { 01617 ppp_warn("no PAP secret found for %s", user); 01618 } else { 01619 /* 01620 * If the secret is "@login", it means to check 01621 * the password against the login database. 01622 */ 01623 int login_secret = strcmp(secret, "@login") == 0; 01624 ret = UPAP_AUTHACK; 01625 if (uselogin || login_secret) { 01626 /* login option or secret is @login */ 01627 if (session_full(ppp_settings.user, ppp_settings.passwd, devnam, msg) == 0) { 01628 ret = UPAP_AUTHNAK; 01629 } 01630 } else if (session_mgmt) { 01631 if (session_check(ppp_settings.user, NULL, devnam, NULL) == 0) { 01632 ppp_warn("Peer %q failed PAP Session verification", user); 01633 ret = UPAP_AUTHNAK; 01634 } 01635 } 01636 if (secret[0] != 0 && !login_secret) { 01637 /* password given in pap-secrets - must match */ 01638 if ((cryptpap || strcmp(ppp_settings.passwd, secret) != 0) 01639 && strcmp(crypt(ppp_settings.passwd, secret), secret) != 0) 01640 ret = UPAP_AUTHNAK; 01641 } 01642 } 01643 fclose(f); 01644 } 01645 01646 if (ret == UPAP_AUTHNAK) { 01647 if (**msg == 0) 01648 *msg = "Login incorrect"; 01649 /* 01650 * XXX can we ever get here more than once?? 01651 * Frustrate passwd stealer programs. 01652 * Allow 10 tries, but start backing off after 3 (stolen from login). 01653 * On 10'th, drop the connection. 01654 */ 01655 if (attempts++ >= 10) { 01656 ppp_warn("%d LOGIN FAILURES ON %s, %s", attempts, devnam, user); 01657 lcp_close(pcb, "login failed"); 01658 } 01659 if (attempts > 3) 01660 sleep((u_int) (attempts - 3) * 5); 01661 if (opts != NULL) 01662 free_wordlist(opts); 01663 01664 } else { 01665 attempts = 0; /* Reset count */ 01666 if (**msg == 0) 01667 *msg = "Login ok"; 01668 set_allowed_addrs(unit, addrs, opts); 01669 } 01670 01671 if (addrs != NULL) 01672 free_wordlist(addrs); 01673 BZERO(ppp_settings.passwd, sizeof(ppp_settings.passwd)); 01674 BZERO(secret, sizeof(secret)); 01675 01676 return ret; 01677 } 01678 01679 /* 01680 * null_login - Check if a username of "" and a password of "" are 01681 * acceptable, and iff so, set the list of acceptable IP addresses 01682 * and return 1. 01683 */ 01684 static int 01685 null_login(unit) 01686 int unit; 01687 { 01688 char *filename; 01689 FILE *f; 01690 int i, ret; 01691 struct wordlist *addrs, *opts; 01692 char secret[MAXWORDLEN]; 01693 01694 /* 01695 * Check if a plugin wants to handle this. 01696 */ 01697 ret = -1; 01698 if (null_auth_hook) 01699 ret = (*null_auth_hook)(&addrs, &opts); 01700 01701 /* 01702 * Open the file of pap secrets and scan for a suitable secret. 01703 */ 01704 if (ret <= 0) { 01705 filename = _PATH_UPAPFILE; 01706 addrs = NULL; 01707 f = fopen(filename, "r"); 01708 if (f == NULL) 01709 return 0; 01710 check_access(f, filename); 01711 01712 i = scan_authfile(f, "", our_name, secret, &addrs, &opts, filename, 0); 01713 ret = i >= 0 && secret[0] == 0; 01714 BZERO(secret, sizeof(secret)); 01715 fclose(f); 01716 } 01717 01718 if (ret) 01719 set_allowed_addrs(unit, addrs, opts); 01720 else if (opts != 0) 01721 free_wordlist(opts); 01722 if (addrs != 0) 01723 free_wordlist(addrs); 01724 01725 return ret; 01726 } 01727 01728 /* 01729 * get_pap_passwd - get a password for authenticating ourselves with 01730 * our peer using PAP. Returns 1 on success, 0 if no suitable password 01731 * could be found. 01732 * Assumes passwd points to MAXSECRETLEN bytes of space (if non-null). 01733 */ 01734 static int 01735 get_pap_passwd(passwd) 01736 char *passwd; 01737 { 01738 char *filename; 01739 FILE *f; 01740 int ret; 01741 char secret[MAXWORDLEN]; 01742 01743 /* 01744 * Check whether a plugin wants to supply this. 01745 */ 01746 if (pap_passwd_hook) { 01747 ret = (*pap_passwd_hook)(ppp_settings,user, ppp_settings.passwd); 01748 if (ret >= 0) 01749 return ret; 01750 } 01751 01752 filename = _PATH_UPAPFILE; 01753 f = fopen(filename, "r"); 01754 if (f == NULL) 01755 return 0; 01756 check_access(f, filename); 01757 ret = scan_authfile(f, user, 01758 (remote_name[0]? remote_name: NULL), 01759 secret, NULL, NULL, filename, 0); 01760 fclose(f); 01761 if (ret < 0) 01762 return 0; 01763 if (passwd != NULL) 01764 strlcpy(passwd, secret, MAXSECRETLEN); 01765 BZERO(secret, sizeof(secret)); 01766 return 1; 01767 } 01768 01769 /* 01770 * have_pap_secret - check whether we have a PAP file with any 01771 * secrets that we could possibly use for authenticating the peer. 01772 */ 01773 static int 01774 have_pap_secret(lacks_ipp) 01775 int *lacks_ipp; 01776 { 01777 FILE *f; 01778 int ret; 01779 char *filename; 01780 struct wordlist *addrs; 01781 01782 /* let the plugin decide, if there is one */ 01783 if (pap_check_hook) { 01784 ret = (*pap_check_hook)(); 01785 if (ret >= 0) 01786 return ret; 01787 } 01788 01789 filename = _PATH_UPAPFILE; 01790 f = fopen(filename, "r"); 01791 if (f == NULL) 01792 return 0; 01793 01794 ret = scan_authfile(f, (explicit_remote? remote_name: NULL), our_name, 01795 NULL, &addrs, NULL, filename, 0); 01796 fclose(f); 01797 if (ret >= 0 && !some_ip_ok(addrs)) { 01798 if (lacks_ipp != 0) 01799 *lacks_ipp = 1; 01800 ret = -1; 01801 } 01802 if (addrs != 0) 01803 free_wordlist(addrs); 01804 01805 return ret >= 0; 01806 } 01807 01808 /* 01809 * have_chap_secret - check whether we have a CHAP file with a 01810 * secret that we could possibly use for authenticating `client' 01811 * on `server'. Either can be the null string, meaning we don't 01812 * know the identity yet. 01813 */ 01814 static int 01815 have_chap_secret(client, server, need_ip, lacks_ipp) 01816 char *client; 01817 char *server; 01818 int need_ip; 01819 int *lacks_ipp; 01820 { 01821 FILE *f; 01822 int ret; 01823 char *filename; 01824 struct wordlist *addrs; 01825 01826 if (chap_check_hook) { 01827 ret = (*chap_check_hook)(); 01828 if (ret >= 0) { 01829 return ret; 01830 } 01831 } 01832 01833 filename = _PATH_CHAPFILE; 01834 f = fopen(filename, "r"); 01835 if (f == NULL) 01836 return 0; 01837 01838 if (client != NULL && client[0] == 0) 01839 client = NULL; 01840 else if (server != NULL && server[0] == 0) 01841 server = NULL; 01842 01843 ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename, 0); 01844 fclose(f); 01845 if (ret >= 0 && need_ip && !some_ip_ok(addrs)) { 01846 if (lacks_ipp != 0) 01847 *lacks_ipp = 1; 01848 ret = -1; 01849 } 01850 if (addrs != 0) 01851 free_wordlist(addrs); 01852 01853 return ret >= 0; 01854 } 01855 01856 /* 01857 * have_srp_secret - check whether we have a SRP file with a 01858 * secret that we could possibly use for authenticating `client' 01859 * on `server'. Either can be the null string, meaning we don't 01860 * know the identity yet. 01861 */ 01862 static int 01863 have_srp_secret(client, server, need_ip, lacks_ipp) 01864 char *client; 01865 char *server; 01866 int need_ip; 01867 int *lacks_ipp; 01868 { 01869 FILE *f; 01870 int ret; 01871 char *filename; 01872 struct wordlist *addrs; 01873 01874 filename = _PATH_SRPFILE; 01875 f = fopen(filename, "r"); 01876 if (f == NULL) 01877 return 0; 01878 01879 if (client != NULL && client[0] == 0) 01880 client = NULL; 01881 else if (server != NULL && server[0] == 0) 01882 server = NULL; 01883 01884 ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename, 0); 01885 fclose(f); 01886 if (ret >= 0 && need_ip && !some_ip_ok(addrs)) { 01887 if (lacks_ipp != 0) 01888 *lacks_ipp = 1; 01889 ret = -1; 01890 } 01891 if (addrs != 0) 01892 free_wordlist(addrs); 01893 01894 return ret >= 0; 01895 } 01896 #endif /* UNUSED */ 01897 01898 #if PPP_AUTH_SUPPORT 01899 /* 01900 * get_secret - open the CHAP secret file and return the secret 01901 * for authenticating the given client on the given server. 01902 * (We could be either client or server). 01903 */ 01904 int get_secret(ppp_pcb *pcb, const char *client, const char *server, char *secret, int *secret_len, int am_server) { 01905 int len; 01906 LWIP_UNUSED_ARG(server); 01907 LWIP_UNUSED_ARG(am_server); 01908 01909 if (!client || !client[0] || !pcb->settings.user || !pcb->settings.passwd || strcmp(client, pcb->settings.user)) { 01910 return 0; 01911 } 01912 01913 len = (int)strlen(pcb->settings.passwd); 01914 if (len > MAXSECRETLEN) { 01915 ppp_error("Secret for %s on %s is too long", client, server); 01916 len = MAXSECRETLEN; 01917 } 01918 01919 MEMCPY(secret, pcb->settings.passwd, len); 01920 *secret_len = len; 01921 return 1; 01922 01923 #if 0 /* UNUSED */ 01924 FILE *f; 01925 int ret, len; 01926 char *filename; 01927 struct wordlist *addrs, *opts; 01928 char secbuf[MAXWORDLEN]; 01929 struct wordlist *addrs; 01930 addrs = NULL; 01931 01932 if (!am_server && ppp_settings.passwd[0] != 0) { 01933 strlcpy(secbuf, ppp_settings.passwd, sizeof(secbuf)); 01934 } else if (!am_server && chap_passwd_hook) { 01935 if ( (*chap_passwd_hook)(client, secbuf) < 0) { 01936 ppp_error("Unable to obtain CHAP password for %s on %s from plugin", 01937 client, server); 01938 return 0; 01939 } 01940 } else { 01941 filename = _PATH_CHAPFILE; 01942 addrs = NULL; 01943 secbuf[0] = 0; 01944 01945 f = fopen(filename, "r"); 01946 if (f == NULL) { 01947 ppp_error("Can't open chap secret file %s: %m", filename); 01948 return 0; 01949 } 01950 check_access(f, filename); 01951 01952 ret = scan_authfile(f, client, server, secbuf, &addrs, &opts, filename, 0); 01953 fclose(f); 01954 if (ret < 0) 01955 return 0; 01956 01957 if (am_server) 01958 set_allowed_addrs(unit, addrs, opts); 01959 else if (opts != 0) 01960 free_wordlist(opts); 01961 if (addrs != 0) 01962 free_wordlist(addrs); 01963 } 01964 01965 len = strlen(secbuf); 01966 if (len > MAXSECRETLEN) { 01967 ppp_error("Secret for %s on %s is too long", client, server); 01968 len = MAXSECRETLEN; 01969 } 01970 MEMCPY(secret, secbuf, len); 01971 BZERO(secbuf, sizeof(secbuf)); 01972 *secret_len = len; 01973 01974 return 1; 01975 #endif /* UNUSED */ 01976 } 01977 #endif /* PPP_AUTH_SUPPORT */ 01978 01979 01980 #if 0 /* UNUSED */ 01981 /* 01982 * get_srp_secret - open the SRP secret file and return the secret 01983 * for authenticating the given client on the given server. 01984 * (We could be either client or server). 01985 */ 01986 int 01987 get_srp_secret(unit, client, server, secret, am_server) 01988 int unit; 01989 char *client; 01990 char *server; 01991 char *secret; 01992 int am_server; 01993 { 01994 FILE *fp; 01995 int ret; 01996 char *filename; 01997 struct wordlist *addrs, *opts; 01998 01999 if (!am_server && ppp_settings.passwd[0] != '\0') { 02000 strlcpy(secret, ppp_settings.passwd, MAXWORDLEN); 02001 } else { 02002 filename = _PATH_SRPFILE; 02003 addrs = NULL; 02004 02005 fp = fopen(filename, "r"); 02006 if (fp == NULL) { 02007 ppp_error("Can't open srp secret file %s: %m", filename); 02008 return 0; 02009 } 02010 check_access(fp, filename); 02011 02012 secret[0] = '\0'; 02013 ret = scan_authfile(fp, client, server, secret, &addrs, &opts, 02014 filename, am_server); 02015 fclose(fp); 02016 if (ret < 0) 02017 return 0; 02018 02019 if (am_server) 02020 set_allowed_addrs(unit, addrs, opts); 02021 else if (opts != NULL) 02022 free_wordlist(opts); 02023 if (addrs != NULL) 02024 free_wordlist(addrs); 02025 } 02026 02027 return 1; 02028 } 02029 02030 /* 02031 * set_allowed_addrs() - set the list of allowed addresses. 02032 * Also looks for `--' indicating options to apply for this peer 02033 * and leaves the following words in extra_options. 02034 */ 02035 static void 02036 set_allowed_addrs(unit, addrs, opts) 02037 int unit; 02038 struct wordlist *addrs; 02039 struct wordlist *opts; 02040 { 02041 int n; 02042 struct wordlist *ap, **plink; 02043 struct permitted_ip *ip; 02044 char *ptr_word, *ptr_mask; 02045 struct hostent *hp; 02046 struct netent *np; 02047 u32_t a, mask, ah, offset; 02048 struct ipcp_options *wo = &ipcp_wantoptions[unit]; 02049 u32_t suggested_ip = 0; 02050 02051 if (addresses[unit] != NULL) 02052 free(addresses[unit]); 02053 addresses[unit] = NULL; 02054 if (extra_options != NULL) 02055 free_wordlist(extra_options); 02056 extra_options = opts; 02057 02058 /* 02059 * Count the number of IP addresses given. 02060 */ 02061 n = wordlist_count(addrs) + wordlist_count(noauth_addrs); 02062 if (n == 0) 02063 return; 02064 ip = (struct permitted_ip *) malloc((n + 1) * sizeof(struct permitted_ip)); 02065 if (ip == 0) 02066 return; 02067 02068 /* temporarily append the noauth_addrs list to addrs */ 02069 for (plink = &addrs; *plink != NULL; plink = &(*plink)->next) 02070 ; 02071 *plink = noauth_addrs; 02072 02073 n = 0; 02074 for (ap = addrs; ap != NULL; ap = ap->next) { 02075 /* "-" means no addresses authorized, "*" means any address allowed */ 02076 ptr_word = ap->word; 02077 if (strcmp(ptr_word, "-") == 0) 02078 break; 02079 if (strcmp(ptr_word, "*") == 0) { 02080 ip[n].permit = 1; 02081 ip[n].base = ip[n].mask = 0; 02082 ++n; 02083 break; 02084 } 02085 02086 ip[n].permit = 1; 02087 if (*ptr_word == '!') { 02088 ip[n].permit = 0; 02089 ++ptr_word; 02090 } 02091 02092 mask = ~ (u32_t) 0; 02093 offset = 0; 02094 ptr_mask = strchr (ptr_word, '/'); 02095 if (ptr_mask != NULL) { 02096 int bit_count; 02097 char *endp; 02098 02099 bit_count = (int) strtol (ptr_mask+1, &endp, 10); 02100 if (bit_count <= 0 || bit_count > 32) { 02101 ppp_warn("invalid address length %v in auth. address list", 02102 ptr_mask+1); 02103 continue; 02104 } 02105 bit_count = 32 - bit_count; /* # bits in host part */ 02106 if (*endp == '+') { 02107 offset = ifunit + 1; 02108 ++endp; 02109 } 02110 if (*endp != 0) { 02111 ppp_warn("invalid address length syntax: %v", ptr_mask+1); 02112 continue; 02113 } 02114 *ptr_mask = '\0'; 02115 mask <<= bit_count; 02116 } 02117 02118 hp = gethostbyname(ptr_word); 02119 if (hp != NULL && hp->h_addrtype == AF_INET) { 02120 a = *(u32_t *)hp->h_addr; 02121 } else { 02122 np = getnetbyname (ptr_word); 02123 if (np != NULL && np->n_addrtype == AF_INET) { 02124 a = lwip_htonl ((u32_t)np->n_net); 02125 if (ptr_mask == NULL) { 02126 /* calculate appropriate mask for net */ 02127 ah = lwip_ntohl(a); 02128 if (IN_CLASSA(ah)) 02129 mask = IN_CLASSA_NET; 02130 else if (IN_CLASSB(ah)) 02131 mask = IN_CLASSB_NET; 02132 else if (IN_CLASSC(ah)) 02133 mask = IN_CLASSC_NET; 02134 } 02135 } else { 02136 a = inet_addr (ptr_word); 02137 } 02138 } 02139 02140 if (ptr_mask != NULL) 02141 *ptr_mask = '/'; 02142 02143 if (a == (u32_t)-1L) { 02144 ppp_warn("unknown host %s in auth. address list", ap->word); 02145 continue; 02146 } 02147 if (offset != 0) { 02148 if (offset >= ~mask) { 02149 ppp_warn("interface unit %d too large for subnet %v", 02150 ifunit, ptr_word); 02151 continue; 02152 } 02153 a = lwip_htonl((lwip_ntohl(a) & mask) + offset); 02154 mask = ~(u32_t)0; 02155 } 02156 ip[n].mask = lwip_htonl(mask); 02157 ip[n].base = a & ip[n].mask; 02158 ++n; 02159 if (~mask == 0 && suggested_ip == 0) 02160 suggested_ip = a; 02161 } 02162 *plink = NULL; 02163 02164 ip[n].permit = 0; /* make the last entry forbid all addresses */ 02165 ip[n].base = 0; /* to terminate the list */ 02166 ip[n].mask = 0; 02167 02168 addresses[unit] = ip; 02169 02170 /* 02171 * If the address given for the peer isn't authorized, or if 02172 * the user hasn't given one, AND there is an authorized address 02173 * which is a single host, then use that if we find one. 02174 */ 02175 if (suggested_ip != 0 02176 && (wo->hisaddr == 0 || !auth_ip_addr(unit, wo->hisaddr))) { 02177 wo->hisaddr = suggested_ip; 02178 /* 02179 * Do we insist on this address? No, if there are other 02180 * addresses authorized than the suggested one. 02181 */ 02182 if (n > 1) 02183 wo->accept_remote = 1; 02184 } 02185 } 02186 02187 /* 02188 * auth_ip_addr - check whether the peer is authorized to use 02189 * a given IP address. Returns 1 if authorized, 0 otherwise. 02190 */ 02191 int 02192 auth_ip_addr(unit, addr) 02193 int unit; 02194 u32_t addr; 02195 { 02196 int ok; 02197 02198 /* don't allow loopback or multicast address */ 02199 if (bad_ip_adrs(addr)) 02200 return 0; 02201 02202 if (allowed_address_hook) { 02203 ok = allowed_address_hook(addr); 02204 if (ok >= 0) return ok; 02205 } 02206 02207 if (addresses[unit] != NULL) { 02208 ok = ip_addr_check(addr, addresses[unit]); 02209 if (ok >= 0) 02210 return ok; 02211 } 02212 02213 if (auth_required) 02214 return 0; /* no addresses authorized */ 02215 return allow_any_ip || privileged || !have_route_to(addr); 02216 } 02217 02218 static int 02219 ip_addr_check(addr, addrs) 02220 u32_t addr; 02221 struct permitted_ip *addrs; 02222 { 02223 for (; ; ++addrs) 02224 if ((addr & addrs->mask) == addrs->base) 02225 return addrs->permit; 02226 } 02227 02228 /* 02229 * bad_ip_adrs - return 1 if the IP address is one we don't want 02230 * to use, such as an address in the loopback net or a multicast address. 02231 * addr is in network byte order. 02232 */ 02233 int 02234 bad_ip_adrs(addr) 02235 u32_t addr; 02236 { 02237 addr = lwip_ntohl(addr); 02238 return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET 02239 || IN_MULTICAST(addr) || IN_BADCLASS(addr); 02240 } 02241 02242 /* 02243 * some_ip_ok - check a wordlist to see if it authorizes any 02244 * IP address(es). 02245 */ 02246 static int 02247 some_ip_ok(addrs) 02248 struct wordlist *addrs; 02249 { 02250 for (; addrs != 0; addrs = addrs->next) { 02251 if (addrs->word[0] == '-') 02252 break; 02253 if (addrs->word[0] != '!') 02254 return 1; /* some IP address is allowed */ 02255 } 02256 return 0; 02257 } 02258 02259 /* 02260 * auth_number - check whether the remote number is allowed to connect. 02261 * Returns 1 if authorized, 0 otherwise. 02262 */ 02263 int 02264 auth_number() 02265 { 02266 struct wordlist *wp = permitted_numbers; 02267 int l; 02268 02269 /* Allow all if no authorization list. */ 02270 if (!wp) 02271 return 1; 02272 02273 /* Allow if we have a match in the authorization list. */ 02274 while (wp) { 02275 /* trailing '*' wildcard */ 02276 l = strlen(wp->word); 02277 if ((wp->word)[l - 1] == '*') 02278 l--; 02279 if (!strncasecmp(wp->word, remote_number, l)) 02280 return 1; 02281 wp = wp->next; 02282 } 02283 02284 return 0; 02285 } 02286 02287 /* 02288 * check_access - complain if a secret file has too-liberal permissions. 02289 */ 02290 static void 02291 check_access(f, filename) 02292 FILE *f; 02293 char *filename; 02294 { 02295 struct stat sbuf; 02296 02297 if (fstat(fileno(f), &sbuf) < 0) { 02298 ppp_warn("cannot stat secret file %s: %m", filename); 02299 } else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) { 02300 ppp_warn("Warning - secret file %s has world and/or group access", 02301 filename); 02302 } 02303 } 02304 02305 /* 02306 * scan_authfile - Scan an authorization file for a secret suitable 02307 * for authenticating `client' on `server'. The return value is -1 02308 * if no secret is found, otherwise >= 0. The return value has 02309 * NONWILD_CLIENT set if the secret didn't have "*" for the client, and 02310 * NONWILD_SERVER set if the secret didn't have "*" for the server. 02311 * Any following words on the line up to a "--" (i.e. address authorization 02312 * info) are placed in a wordlist and returned in *addrs. Any 02313 * following words (extra options) are placed in a wordlist and 02314 * returned in *opts. 02315 * We assume secret is NULL or points to MAXWORDLEN bytes of space. 02316 * Flags are non-zero if we need two colons in the secret in order to 02317 * match. 02318 */ 02319 static int 02320 scan_authfile(f, client, server, secret, addrs, opts, filename, flags) 02321 FILE *f; 02322 char *client; 02323 char *server; 02324 char *secret; 02325 struct wordlist **addrs; 02326 struct wordlist **opts; 02327 char *filename; 02328 int flags; 02329 { 02330 int newline, xxx; 02331 int got_flag, best_flag; 02332 FILE *sf; 02333 struct wordlist *ap, *addr_list, *alist, **app; 02334 char word[MAXWORDLEN]; 02335 char atfile[MAXWORDLEN]; 02336 char lsecret[MAXWORDLEN]; 02337 char *cp; 02338 02339 if (addrs != NULL) 02340 *addrs = NULL; 02341 if (opts != NULL) 02342 *opts = NULL; 02343 addr_list = NULL; 02344 if (!getword(f, word, &newline, filename)) 02345 return -1; /* file is empty??? */ 02346 newline = 1; 02347 best_flag = -1; 02348 for (;;) { 02349 /* 02350 * Skip until we find a word at the start of a line. 02351 */ 02352 while (!newline && getword(f, word, &newline, filename)) 02353 ; 02354 if (!newline) 02355 break; /* got to end of file */ 02356 02357 /* 02358 * Got a client - check if it's a match or a wildcard. 02359 */ 02360 got_flag = 0; 02361 if (client != NULL && strcmp(word, client) != 0 && !ISWILD(word)) { 02362 newline = 0; 02363 continue; 02364 } 02365 if (!ISWILD(word)) 02366 got_flag = NONWILD_CLIENT; 02367 02368 /* 02369 * Now get a server and check if it matches. 02370 */ 02371 if (!getword(f, word, &newline, filename)) 02372 break; 02373 if (newline) 02374 continue; 02375 if (!ISWILD(word)) { 02376 if (server != NULL && strcmp(word, server) != 0) 02377 continue; 02378 got_flag |= NONWILD_SERVER; 02379 } 02380 02381 /* 02382 * Got some sort of a match - see if it's better than what 02383 * we have already. 02384 */ 02385 if (got_flag <= best_flag) 02386 continue; 02387 02388 /* 02389 * Get the secret. 02390 */ 02391 if (!getword(f, word, &newline, filename)) 02392 break; 02393 if (newline) 02394 continue; 02395 02396 /* 02397 * SRP-SHA1 authenticator should never be reading secrets from 02398 * a file. (Authenticatee may, though.) 02399 */ 02400 if (flags && ((cp = strchr(word, ':')) == NULL || 02401 strchr(cp + 1, ':') == NULL)) 02402 continue; 02403 02404 if (secret != NULL) { 02405 /* 02406 * Special syntax: @/pathname means read secret from file. 02407 */ 02408 if (word[0] == '@' && word[1] == '/') { 02409 strlcpy(atfile, word+1, sizeof(atfile)); 02410 if ((sf = fopen(atfile, "r")) == NULL) { 02411 ppp_warn("can't open indirect secret file %s", atfile); 02412 continue; 02413 } 02414 check_access(sf, atfile); 02415 if (!getword(sf, word, &xxx, atfile)) { 02416 ppp_warn("no secret in indirect secret file %s", atfile); 02417 fclose(sf); 02418 continue; 02419 } 02420 fclose(sf); 02421 } 02422 strlcpy(lsecret, word, sizeof(lsecret)); 02423 } 02424 02425 /* 02426 * Now read address authorization info and make a wordlist. 02427 */ 02428 app = &alist; 02429 for (;;) { 02430 if (!getword(f, word, &newline, filename) || newline) 02431 break; 02432 ap = (struct wordlist *) 02433 malloc(sizeof(struct wordlist) + strlen(word) + 1); 02434 if (ap == NULL) 02435 novm("authorized addresses"); 02436 ap->word = (char *) (ap + 1); 02437 strcpy(ap->word, word); 02438 *app = ap; 02439 app = &ap->next; 02440 } 02441 *app = NULL; 02442 02443 /* 02444 * This is the best so far; remember it. 02445 */ 02446 best_flag = got_flag; 02447 if (addr_list) 02448 free_wordlist(addr_list); 02449 addr_list = alist; 02450 if (secret != NULL) 02451 strlcpy(secret, lsecret, MAXWORDLEN); 02452 02453 if (!newline) 02454 break; 02455 } 02456 02457 /* scan for a -- word indicating the start of options */ 02458 for (app = &addr_list; (ap = *app) != NULL; app = &ap->next) 02459 if (strcmp(ap->word, "--") == 0) 02460 break; 02461 /* ap = start of options */ 02462 if (ap != NULL) { 02463 ap = ap->next; /* first option */ 02464 free(*app); /* free the "--" word */ 02465 *app = NULL; /* terminate addr list */ 02466 } 02467 if (opts != NULL) 02468 *opts = ap; 02469 else if (ap != NULL) 02470 free_wordlist(ap); 02471 if (addrs != NULL) 02472 *addrs = addr_list; 02473 else if (addr_list != NULL) 02474 free_wordlist(addr_list); 02475 02476 return best_flag; 02477 } 02478 02479 /* 02480 * wordlist_count - return the number of items in a wordlist 02481 */ 02482 static int 02483 wordlist_count(wp) 02484 struct wordlist *wp; 02485 { 02486 int n; 02487 02488 for (n = 0; wp != NULL; wp = wp->next) 02489 ++n; 02490 return n; 02491 } 02492 02493 /* 02494 * free_wordlist - release memory allocated for a wordlist. 02495 */ 02496 static void 02497 free_wordlist(wp) 02498 struct wordlist *wp; 02499 { 02500 struct wordlist *next; 02501 02502 while (wp != NULL) { 02503 next = wp->next; 02504 free(wp); 02505 wp = next; 02506 } 02507 } 02508 #endif /* UNUSED */ 02509 02510 #endif /* PPP_SUPPORT */
Generated on Tue Jul 12 2022 18:18:38 by
