Diff: SRF02.h

Revision:

0:8ac34d529a3b

Child:

1:6b978ea41787

diff -r 000000000000 -r 8ac34d529a3b SRF02.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SRF02.h	Fri Dec 16 14:00:06 2011 +0000
@@ -0,0 +1,87 @@
+/* mbed SRF02 Ultrasonic Ranger Sensor Library
+ * Created by bobboteck at 16/11/2011
+ *
+ * Based on: Chris Styles [http://mbed.org/users/chris/] Library for SRF08 
+ *           "http://mbed.org/users/chris/programs/SRF08/603nk/docs/"
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef SRF02_H
+#define SRF02_H
+
+#include "mbed.h"
+
+#define INCHES_RESULT       0x50    // For result in inches
+#define CENTIMETERS_RESULT  0x51    // For result in centimeters
+#define MICROSECONDS_RESULT 0x52    // For result in micro-seconds
+/* Library for the SRF02 Ultrasonic Ranger Sensor, using the I2C bus for the
+ * comunication. Remeber that sensor can function in serial mode if MODE pin
+ * is connected to the ground, but this libary not support this mode.
+ *
+ * Example:
+ * @code
+ *  // Continuously measuring range
+ *  #include "mbed.h"
+ *  #include "SRF02.h"
+ *  // Create instance of class SRF02 for device at address 0xE0 and take mesure in cm
+ *  SRF02 srf02(p28, p27, 0xE0, 1);
+ *  DigitalOut led1(LED1);
+ * 
+ *  int main() 
+ *  {
+ *      led1=1;
+ *      while(1)
+ *      {
+ *          printf("Measured range : %.2f cm\n\r",srf02.read());
+ *          wait(0.5);
+ *          led1=!led1;
+ *      }
+ *  }
+ * @endcode
+ */
+class SRF02
+{
+    public:
+        enum measure_type{INCHES=0x050,CENTIMETERS=0x51,MICROSECONDS=0x52};
+        /* Creates an instance of class. Setting the pin used for I2C, the address of device and the measure range type.
+         *
+         * @param sda A pin used for SDA I2C signal.
+         * @param scl A pin used for SCL I2C signal.
+         * @param addr The address of I2C SRF02 device.
+         * @param measure_type The of mesure response (0-inches,1-centimeters,2-micro-seconds).
+         */
+        SRF02(PinName sda, PinName scl, int addr, char type);
+      
+        /* Destroyer of class instance. */
+        ~SRF02();
+      
+        /* Start and return the range measure.
+         *
+         * @returns The value of measure.
+         */
+        float read();
+      
+    private:
+        I2C _i2c;      // I2C object to comunicate with SRF02
+        int _addr;     // Address of sensor
+        char _typem;     // Type of mesure
+};
+
+#endif