This example demonstrates the reading of the USB Gamepad in the Nucleo.

Dependencies:   mbed

Intro

This example demonstrates the reading of the USB Gamepad in the Nucleo.

Parts

STM32 Nucleo F446RE
USB Connector
LED 2pcs
Register 470 ohm 2pcs
Breadboard
Wires

Wiring diagram

/media/uploads/beaglescout007/nucleo_ex04_usbpad.png This circuit diagram was created by fritzing.

/media/uploads/beaglescout007/usbcon.jpg

USB con.Nucleo
GNDGND
+PA_12
-PA_11
5V5V

https://youtu.be/EYIukjwJSew

Original Library

Revision:
0:b5f79b4f741d
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHost/USBHostHub.cpp	Tue Mar 15 11:39:04 2016 +0000
@@ -0,0 +1,113 @@
+#include "USBHost.h"
+
+#define PORT_CONNECTION   0
+#define PORT_ENABLE       1
+#define PORT_SUSPEND      2
+#define PORT_OVER_CURRENT 3
+#define PORT_RESET        4
+#define PORT_POWER        8
+#define PORT_LOW_SPEED    9
+
+#define C_PORT_CONNECTION   16
+#define C_PORT_ENABLE       17
+#define C_PORT_SUSPEND      18
+#define C_PORT_OVER_CURRENT 19
+#define C_PORT_RESET        20
+
+bool USBHost::Hub(USBDeviceConnected* dev) {
+    USB_INFO("New HUB: VID:%04x PID:%04x [dev: %p]", dev->getVid(), dev->getPid(), dev);
+    HubDescriptor hubdesc;
+    // get HUB descriptor
+    int rc = controlRead(dev, 
+                        USB_DEVICE_TO_HOST | USB_REQUEST_TYPE_CLASS,
+                        GET_DESCRIPTOR,
+                        0x29 << 8, 0, reinterpret_cast<uint8_t*>(&hubdesc), 
+                        sizeof(HubDescriptor));
+    USB_TEST_ASSERT(rc == USB_TYPE_OK);
+    if (rc != USB_TYPE_OK) {
+        return false;
+    }
+    USB_DBG_HEX((uint8_t*)&hubdesc, sizeof(hubdesc));
+
+    uint32_t status;
+    rc = controlRead( dev,
+                      0xa0, 0, 0, 0, reinterpret_cast<uint8_t*>(&status), 4);
+    USB_TEST_ASSERT(rc == USB_TYPE_OK);
+    if (rc != USB_TYPE_OK) {
+        return false;
+    }
+    USB_DBG("HUB STATUS: %08X\n", status);
+
+    for(int i = 1; i <= hubdesc.bNbrPorts; i++) {
+        SetPortPower(dev, i); // power on
+        wait_ms(hubdesc.bPwrOn2PwrGood*2);
+        uint32_t status;
+        GetPortStatus(dev, i, &status);
+        USB_DBG("port: %d status: %08X\n", i, status);
+        if (status & 0x010000) { // Connect Status Change, has changed
+            USB_TEST_ASSERT(status & 0x000001);
+            ClearPortFeature(dev, C_PORT_CONNECTION, i);
+            int lowSpeed = 0;
+            if (status & 0x0200) {
+                lowSpeed = 1;
+            }
+            PortReset(dev, i);
+            if (!addDevice(dev, i, lowSpeed)) {
+                ClearPortPower(dev, i); // power off
+            }
+        } else {
+            ClearPortPower(dev, i); // power off
+        }
+    }
+    return false;
+}
+
+
+int USBHost::SetPortPower(USBDeviceConnected* dev, int port)
+{
+    return SetPortFeature(dev, PORT_POWER, port);
+}
+
+int USBHost::ClearPortPower(USBDeviceConnected* dev, int port)
+{
+    return ClearPortFeature(dev, PORT_POWER, port);
+}
+
+int USBHost::SetPortFeature(USBDeviceConnected* dev, int feature, int index)
+{
+    return controlWrite(dev, 0x23, SET_FEATURE,feature,index,0,0);
+}
+
+int USBHost::ClearPortFeature(USBDeviceConnected* dev, int feature, int index)
+{
+    return controlWrite(dev, 0x23, CLEAR_FEATURE,feature,index,0,0);
+}
+
+int USBHost::SetPortReset(USBDeviceConnected* dev, int port)
+{
+    return SetPortFeature(dev, PORT_RESET, port);
+}
+
+int USBHost::GetPortStatus(USBDeviceConnected* dev, int port, uint32_t* status)
+{
+    return controlRead(dev, 0xa3, GET_STATUS, 0, port, (uint8_t*)status, 4);
+}
+
+int USBHost::PortReset(USBDeviceConnected* dev, int port)
+{
+    USB_DBG("%p port=%d\n", this, port);
+    USB_TEST_ASSERT(port >= 1);
+    SetPortReset(dev, port);
+    // wait reset
+    for(int i = 0; i < 100; i++) {
+        uint32_t status;    
+        GetPortStatus(dev, port, &status);
+        USB_DBG("RESET port: %d status: %08X\n", port, status);
+        if (status & 0x100000) { // Reset change , Reset complete
+            return USB_TYPE_OK;
+        }
+        wait_ms(5);
+     }
+     return USB_TYPE_ERROR;
+}
+