File content as of revision 1:2944c0d494ff:

/*
** Super lightweight, not at all robust, TFTP server for FRDM-K64F eval board.
** This tool supports read-only access to one file. It does not support NACK responses
** or timeouts. The tool is intended for use by our test department to check out Ethernet
** functionality on our main processor board.
**
** 11 October 2018
** - am
*/

#include "mbed.h"
#include "EthernetInterface.h"
#include "string.h"

#include "env.h"

#define IP_ADDR     "192.168.1.10"
#define NET_MASK    "255.255.255.0"
#define GATEWAY     "192.168.1.1"
#define TFTP_PORT   69

#define LED_ON  0
#define LED_OFF 1

// status LEDs
DigitalOut led_error(LED1);     // red
DigitalOut led_waiting(LED2);   // green
DigitalOut led_connected(LED3); // blue

// TFTP opcodes
enum opcode { RRQ=1, WRQ, DATA, ACK, ERROR };

// TFTP packet structure
typedef union {

    uint16_t opcode;

    struct {
        uint16_t opcode; // RRQ or WRQ
        char filename_and_mode[512];
    } request;

    struct {
        uint16_t opcode; // DATA
        uint16_t block_number;
        char data[512];
    } data;

    struct {
        uint16_t opcode; // ACK
        uint16_t block_number;
    } ack;

    struct {
        uint16_t opcode; // ERROR
        uint16_t error_code;
        char error_string[512];
    } error;

} tftp_packet_t;

int tftp_send_error(UDPSocket socket, Endpoint end_point, int error_code, char *error_string) {
    
    tftp_packet_t packet;
    char *packet_ptr = (char *)&packet;

    packet.opcode = htons(ERROR);
    packet.error.error_code = htons(error_code);
    strcpy(packet.error.error_string, error_string);

    return socket.sendTo(end_point, packet_ptr, 4 + strlen(error_string)); // 4 = sizeof(opcode + error_code)
}

int main (void) {

    EthernetInterface eth;
    UDPSocket tftp_server;
    Endpoint client;

    // create data packet storage    
    tftp_packet_t packet;
    char *packet_ptr = (char *)&packet;

    // assign ip address, net mask and gateway to Ethernet interface
    eth.init(IP_ADDR, NET_MASK, GATEWAY);
    eth.connect();
    
    // main loop    
    while (true) {

        // clear status LEDs
        led_error = LED_OFF;
        led_waiting = LED_OFF;
        led_connected = LED_OFF;
        wait(1); // one second

        // wait for request
        led_waiting = LED_ON;
        tftp_server.bind(TFTP_PORT);
        tftp_server.receiveFrom(client, packet_ptr, sizeof(packet));

        // if it's a read request
        if (ntohs(packet.opcode) == RRQ) {
            // and it's for the environment file
            if (!strncmp(packet.request.filename_and_mode, "/production/u-boot-env_txt", 26)) {
                led_waiting = LED_OFF;
                // send file
                int i_block = 1;
                int i_string = 0;
                int i_char = 0;
                int i_buff = 512;
                while (i_buff == 512) {
                    led_connected = LED_ON;
                    i_buff = 0;
                    packet.opcode = htons(DATA);
                    packet.data.block_number = htons(i_block++);
                    do {
                        packet.data.data[i_buff++] = env_string[i_string][i_char++];
                        // check for end of string
                        if (env_string[i_string][i_char] == '\0') {
                            i_char = 0;
                            i_string++;
                        }
                    } while ((i_buff < 512) && (env_string[i_string][0] != '\0'));
                    tftp_server.sendTo(client, packet_ptr, 4 + i_buff); // 4 = sizeof(opcode + block_number)
                    led_connected = LED_OFF;
                    led_error = LED_ON;
                    tftp_server.receiveFrom(client, packet_ptr, sizeof(packet)); // wait for ACK
                    led_error = LED_OFF;
                };
            }
            // error, we only support the u-boot-env.txt file
            else tftp_send_error(tftp_server, client, 0, "this test board only supports reading the u-boot-env.txt file");
        }
        // error, we only support read requests
        else tftp_send_error(tftp_server, client, 0, "this test board only supports reading the u-boot-env.txt file");

        led_connected = LED_ON;
        led_waiting = LED_ON;
        wait(1); // one second
        tftp_server.close();
    }
}