Revision 0:e8a124690cda, committed 2013-09-27

Comitter:

asifahmad

Date:

Fri Sep 27 18:13:20 2013 +0000

Commit message:

sleep

Changed in this revision

diff -r 000000000000 -r e8a124690cda mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Sep 27 18:13:20 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f
\ No newline at end of file

diff -r 000000000000 -r e8a124690cda pca9865.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pca9865.h	Fri Sep 27 18:13:20 2013 +0000
@@ -0,0 +1,74 @@
+/**************************************************************************/
+/*!
+    @file     pca9685.h
+    @author   K. Townsend (microBuilder.eu)
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2012 K. Townsend
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef _PCA9685_H_
+#define _PCA9685_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "projectconfig.h"
+#include "core/i2c/i2c.h"
+
+#define PCA9685_ADDRESS           (0x40<<1)    // 1000000
+#define PCA9685_READBIT           (0x01)
+
+enum
+{
+  PCA9685_REG_SUBADR1            = 0x02,
+  PCA9685_REG_SUBADR2            = 0x03,
+  PCA9685_REG_SUBADR3            = 0x04,
+  PCA9685_REG_MODE1              = 0x00,
+  PCA9685_REG_PRESCALE           = 0xFE,
+  PCA9685_REG_LED0_ON_L          = 0x06,
+  PCA9685_REG_LED0_ON_H          = 0x07,
+  PCA9685_REG_LED0_OFF_L         = 0x08,
+  PCA9685_REG_LED0_OFF_H         = 0x09,
+  PCA9685_REG_ALLLED_ON_L        = 0xFA,
+  PCA9685_REG_ALLLED_ON_H        = 0xFB,
+  PCA9685_REG_ALLLED_OFF_L       = 0xFC,
+  PCA9685_REG_ALLLED_OFF_H       = 0xFD
+};
+
+error_t pca9685Init (uint8_t address);
+error_t pca9685SetFrequency (uint16_t freqHz);
+error_t pca9685SetPWM (uint16_t channel, uint16_t on, uint16_t off);
+
+#ifdef __cplusplus
+}
+#endif 
+
+#endif
\ No newline at end of file

diff -r 000000000000 -r e8a124690cda pmu.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pmu.c	Fri Sep 27 18:13:20 2013 +0000
@@ -0,0 +1,255 @@
+
+/**************************************************************************/
+/*!
+    @file     pca9685.c
+    @author   K. Townsend (microBuilder.eu)
+
+    @brief    Drivers for NXP's PCA9685 12-bit 16-channel PWM Driver
+
+    @section DESCRIPTION
+
+    The PCA9685 is an I2C-bus controlled 16-channel LED controller
+    optimized for LCD Red/Green/Blue/Amber (RGBA) color backlighting
+    applications. Each LED output has its own 12-bit resolution (4096
+    steps) fixed frequency individual PWM controller that operates at a
+    programmable frequency from 40 Hz to 1000 Hz with a duty cycle that
+    is adjustable from 0 % to 100 % to allow the LED to be set to a
+    specific brightness value. All outputs are set to the same PWM
+    frequency.
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2012, K. Townsend
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+#include "pca9685.h"
+#include "core/gpio/gpio.h"
+#include "core/delay/delay.h"
+
+extern volatile uint8_t   I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t   I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t  I2CReadLength, I2CWriteLength;
+
+static bool _pca9685Initialised = false;
+static uint8_t _pca9685Address = PCA9685_ADDRESS;
+
+/**************************************************************************/
+/*!
+    @brief  Writes the specified number of bytes over I2C
+*/
+/**************************************************************************/
+error_t pca9685WriteBytes(uint8_t reg, uint8_t *buffer, size_t length)
+{
+  uint32_t i;
+
+  /* Try to avoid buffer overflow */
+  ASSERT(length <= I2C_BUFSIZE - 2, ERROR_BUFFEROVERFLOW);
+
+  /* Fill write buffer */
+  for ( i = 2; i < length+2; i++ )
+  {
+    I2CMasterBuffer[i] = buffer[i-2];
+  }
+
+  /* Write transaction */
+  I2CWriteLength = 2+length;
+  I2CReadLength = 0;
+  I2CMasterBuffer[0] = _pca9685Address;
+  I2CMasterBuffer[1] = reg;
+  /* Check if we got an ACK or TIMEOUT error */
+  ASSERT_I2C_STATUS(i2cEngine());
+
+  return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+    @brief  Reads the specified number of bytes over I2C
+*/
+/**************************************************************************/
+error_t pca9685ReadBytes(uint8_t reg, uint8_t *buffer, size_t length)
+{
+  uint32_t i;
+
+  /* Try to avoid buffer overflow */
+  ASSERT(length <= I2C_BUFSIZE, ERROR_BUFFEROVERFLOW);
+
+  /* Read and write need to be handled in separate transactions or the
+     PCA9685 increments the current register one step ahead of where
+     we should be. */
+
+  /* Write transaction */
+  I2CWriteLength = 2;
+  I2CReadLength = 0;
+  I2CMasterBuffer[0] = _pca9685Address;
+  I2CMasterBuffer[1] = reg;
+  i2cEngine();
+
+  /* Read transaction */
+  I2CWriteLength = 0;
+  I2CReadLength = length;
+  I2CMasterBuffer[0] = _pca9685Address | PCA9685_READBIT;
+  /* Check if we got an ACK or TIMEOUT error */
+  ASSERT_I2C_STATUS(i2cEngine());
+
+  /* Fill the buffer with the I2C response */
+  for ( i = 0; i < length; i++ )
+  {
+    buffer[i] = I2CSlaveBuffer[i];
+  }
+
+  return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+    @brief  Writes an 8 bit value over I2C
+*/
+/**************************************************************************/
+error_t pca9685Write8 (uint8_t reg, uint8_t value)
+{
+  uint8_t buffer = value;
+  return pca9685WriteBytes(reg, &buffer, 1);
+}
+
+/**************************************************************************/
+/*!
+    @brief  Reads a single byte over I2C
+*/
+/**************************************************************************/
+error_t pca9685Read8(uint8_t reg, uint8_t *result)
+{
+  return pca9685ReadBytes(reg, result, 1);
+}
+
+/**************************************************************************/
+/*!
+    @brief  Initialises the I2C block
+
+    @param address  The device I2C address (left-shifted 1 bit)
+*/
+/**************************************************************************/
+error_t pca9685Init(uint8_t address)
+{
+  // Initialise I2C
+  i2cInit(I2CMASTER);
+
+  /* Ping the I2C device first to see if it exists! */
+  ASSERT(!(i2cCheckAddress(_pca9685Address)), ERROR_I2C_DEVICENOTFOUND);
+
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_MODE1, 0x00));
+
+  _pca9685Initialised = true;
+
+  return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+    @brief  Sets the PWM clock frequency (40-1000Hz)
+
+    @param freqHz  Approximate frequency in Hz (40-1000)
+*/
+/**************************************************************************/
+error_t pca9685SetFrequency(uint16_t freqHz)
+{
+  uint32_t prescaleValue;
+  uint8_t oldMode, newMode;
+
+  ASSERT(_pca9685Initialised, ERROR_DEVICENOTINITIALISED);
+
+  if (freqHz < 40)
+  {
+    freqHz = 40;
+  }
+
+  if (freqHz > 1000)
+  {
+    freqHz = 1000;
+  }
+
+  // prescaleValue = round(25MHz / (4096*updateRate)) - 1
+  prescaleValue = 25000000;   // 25 MHz
+  prescaleValue /= 4096;      // 12-bit
+  prescaleValue /= freqHz;
+  prescaleValue -= 1;
+
+  ASSERT_STATUS(pca9685Read8(PCA9685_REG_MODE1, &oldMode));
+  newMode = (oldMode & 0x7F) | 0x10;
+
+  // Go to sleep
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_MODE1, newMode));
+
+  // Set prescale
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_PRESCALE, prescaleValue & 0xFF));
+
+  // Wakeup
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_MODE1, oldMode));
+  delay(5);
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_MODE1, oldMode | 0x80));
+
+  return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+    @brief  Sets the PWM output of the specified channel
+
+    @param channel  The channel number [0..15]
+    @param on       The 12-bit start point (low to high transition)
+    @param off      The 12-bit stop point (high to low transition)
+*/
+/**************************************************************************/
+error_t pca9685SetPWM(uint16_t channel, uint16_t on, uint16_t off)
+{
+  ASSERT(_pca9685Initialised, ERROR_DEVICENOTINITIALISED);
+
+  if (on > 0xFFF)
+  {
+    on = 0xFFF;
+  }
+
+  if (off < on)
+  {
+    off = on;
+  }
+
+  if (off > 0xFFF)
+  {
+    off = 0xFFF;
+  }
+
+  /* Set the on and off values */
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_LED0_ON_L+4*channel, on & 0xFF));
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_LED0_ON_H+4*channel, on >> 8));
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_LED0_OFF_L+4*channel, off & 0xFF));
+  ASSERT_STATUS(pca9685Write8(PCA9685_REG_LED0_OFF_H+4*channel, off >> 8));
+
+  return ERROR_NONE;
+}
\ No newline at end of file

diff -r 000000000000 -r e8a124690cda pmu.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pmu.h	Fri Sep 27 18:13:20 2013 +0000
@@ -0,0 +1,69 @@
+/**************************************************************************/
+/*!
+    @file     pmu.c
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2013, K. Townsend (microBuilder.eu)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __PMU_H__
+#define __PMU_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "projectconfig.h"
+
+#define MCU_SLEEP           (0)
+#define MCU_DEEP_SLEEP      (1)
+#define MCU_POWER_DOWN      (2)
+
+#define NVIC_LP_SEVONPEND   (0x10)
+#define NVIC_LP_SLEEPDEEP   (0x04)
+#define NVIC_LP_SLEEPONEXIT (0x02)
+
+#define IRC_OUT_PD          (0x1<<0)
+#define IRC_PD              (0x1<<1)
+#define FLASH_PD            (0x1<<2)
+#define BOD_PD              (0x1<<3)
+#define ADC_PD              (0x1<<4)
+#define SYS_OSC_PD          (0x1<<5)
+#define WDT_OSC_PD          (0x1<<6)
+#define SYS_PLL_PD          (0x1<<7)
+#define USBPLL_PD           (0x1<<8)
+#define USBPAD_PD           (0x1<<10)
+
+void PMU_Sleep( uint32_t SleepMode, uint32_t SleepCtrl );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
\ No newline at end of file