hh
Dependencies: DISCO_L475VG_IOT01A_wifi
Diff: Wificonnect.cpp
- Revision:
- 0:db42952db1a5
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Wificonnect.cpp Tue Aug 20 08:35:06 2019 +0000 @@ -0,0 +1,133 @@ +#include "mbed.h" +#include "wifi.h" +#include "datacheck.h" +/*------------------------------------------------------------------------------ +Hyperterminal settings: 115200 bauds, 8-bit data, no parity + +This example + - connects to a wifi network (SSID & PWD to set in mbed_app.json) + - Connects to a TCP server (set the address in RemoteIP) + - Sends "Hello" to the server when data is received + +This example uses SPI3 ( PE_0 PC_10 PC_12 PC_11), wifi_wakeup pin (PB_13), +wifi_dataready pin (PE_1), wifi reset pin (PE_8) +------------------------------------------------------------------------------*/ + +/* Private defines -----------------------------------------------------------*/ +#define WIFI_WRITE_TIMEOUT 10000 +#define WIFI_READ_TIMEOUT 10000 +#define CONNECTION_TRIAL_MAX 10 + +/* Private typedef------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +Serial pc(SERIAL_TX, SERIAL_RX); +uint8_t RemoteIP[] = {MBED_CONF_APP_SERVER_IP_1,MBED_CONF_APP_SERVER_IP_2,MBED_CONF_APP_SERVER_IP_3, MBED_CONF_APP_SERVER_IP_4}; +uint8_t RxData [500]; +char* modulename; +uint8_t TxData[] = "STM32 : Hello!\n"; +uint16_t RxLen; +uint8_t MAC_Addr[6]; +uint8_t IP_Addr[4]; + +void checkdata(uint8_t S[]); +void update_state(); + +Ticker tick; + +int wifi_connect() +{ + int32_t Socket = -1; + uint16_t Datalen; + uint16_t Trials = CONNECTION_TRIAL_MAX; + + pc.baud(115200); + + printf("\n"); + printf("************************************************************\n"); + printf("*** STM32 IoT Discovery kit for STM32L475 MCU ***\n"); + printf("*** WIFI Module in TCP Client mode demonstration ***\n\n"); + printf("*** TCP Client Instructions :\n"); + printf("*** 1- Make sure your Phone is connected to the same network that\n"); + printf("*** you configured using the Configuration Access Point.\n"); + printf("*** 2- Create a server by using the android application TCP Server\n"); + printf("*** with port(8002).\n"); + printf("*** 3- Get the Network Name or IP Address of your phone from the step 2.\n\n"); + printf("************************************************************\n"); + + /*Initialize WIFI module */ + if(WIFI_Init() == WIFI_STATUS_OK) { + printf("> WIFI Module Initialized.\n"); + if(WIFI_GetMAC_Address(MAC_Addr) == WIFI_STATUS_OK) { + printf("> es-wifi module MAC Address : %X:%X:%X:%X:%X:%X\n", + MAC_Addr[0], + MAC_Addr[1], + MAC_Addr[2], + MAC_Addr[3], + MAC_Addr[4], + MAC_Addr[5]); + } else { + printf("> ERROR : CANNOT get MAC address\n"); + } + + if( WIFI_Connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, WIFI_ECN_WPA_PSK)== WIFI_STATUS_OK) { + + printf("> es-wifi module connected \n"); + if(WIFI_GetIP_Address(IP_Addr) == WIFI_STATUS_OK) { + printf("> es-wifi module got IP Address : %d.%d.%d.%d\n", + IP_Addr[0], + IP_Addr[1], + IP_Addr[2], + IP_Addr[3]); + + printf("> Trying to connect to Server: %d.%d.%d.%d:8002 ...\n", + RemoteIP[0], + RemoteIP[1], + RemoteIP[2], + RemoteIP[3]); + + while (Trials--){ + if( WIFI_OpenClientConnection(0, WIFI_TCP_PROTOCOL, "TCP_CLIENT", RemoteIP, 8002, 0) == WIFI_STATUS_OK){ + //if( WIFI_OpenClientConnection(0, WIFI_TCP_PROTOCOL, "TCP_CLIENT", RemoteIP, 80, 0) == WIFI_STATUS_OK){ + printf("> TCP Connection opened successfully.\n"); + Socket = 0; + } + } + if(!Trials) { + printf("> ERROR : Cannot open Connection\n"); + } + } else { + printf("> ERROR : es-wifi module CANNOT get IP address\n"); + } + } else { + printf("> ERROR : es-wifi module NOT connected\n"); + } + } else { + printf("> ERROR : WIFI Module cannot be initialized.\n"); + } + + while(1){ + tick.attach(&update_state,5); + if(Socket != -1) { + if(WIFI_ReceiveData(Socket, RxData, sizeof(RxData), &Datalen, WIFI_READ_TIMEOUT) == WIFI_STATUS_OK){ + if(Datalen > 0) { + //printf("%s \n",RxData); + Data_Receive(RxData); + if(WIFI_SendData(Socket, TxData, sizeof(TxData), &Datalen, WIFI_WRITE_TIMEOUT) != WIFI_STATUS_OK) { + printf("> ERROR : Failed to send Data.\n"); + } + } + } else { + printf("> ERROR : Failed to Receive Data.\n"); + } + } + } +} + + +int update_flag=0; +void update_state() +{ + update_flag++; + printf("%d\n",update_flag); +}