Arnaud VALLEY
Mirror with some correction
Dependencies: mbed FastIO FastPWM USBDevice
History
- Correct information regarding your last merge
2021-10-01, by arnoz [Fri, 01 Oct 2021 08:19:46 +0000] rev 116
- Correct information regarding your last merge
Preserve 4 bytes of data in Config.expan.ext[] (extra type-specific data for expansion boards); document expansion board set type 4 = Arnoz Mollusk
2021-10-01, by mjr [Fri, 01 Oct 2021 03:31:08 +0000] rev 115
Preserve 4 bytes of data in Config.expan.ext[] (extra type-specific data for expansion boards); document expansion board set type 4 = Arnoz Mollusk
Zero-initialize outLevel array at allocation, to fix random (uninitialized) device output firing if night mode is activated before any output level setting commands are sent from the PC;
2021-07-16, by mjr [Fri, 16 Jul 2021 05:21:08 +0000] rev 114
Zero-initialize outLevel array at allocation, to fix random (uninitialized) device output firing if night mode is activated before any output level setting commands are sent from the PC;
VCNL4010 tested and working;
2021-06-02, by mjr [Wed, 02 Jun 2021 02:14:27 +0000] rev 113
VCNL4010 tested and working;
Add watchdog timer for MMA8451Q accelerometer
2021-04-29, by mjr [Thu, 29 Apr 2021 19:56:49 +0000] rev 112
Add watchdog timer for MMA8451Q accelerometer
Add initial support for VCNL4010 IR distance sensor - experimental and untested
2021-02-22, by mjr [Mon, 22 Feb 2021 06:57:59 +0000] rev 111
Add initial support for VCNL4010 IR distance sensor - experimental and untested
TCD1103 comments
2020-05-04, by mjr [Mon, 04 May 2020 21:05:35 +0000] rev 110
TCD1103 comments
TCD1103 DMA setup time padding to fix sporadic missed first pixel in transfer; fix TV ON so that the TV ON IR commands don't have to be grouped in the IR command first slots
2020-04-18, by mjr [Sat, 18 Apr 2020 19:08:55 +0000] rev 109
TCD1103 DMA setup time padding to fix sporadic missed first pixel in transfer; fix TV ON so that the TV ON IR commands don't have to be grouped in the IR command first slots
Add quadrature channel A/B reporting to plunger status report
2020-02-18, by mjr [Tue, 18 Feb 2020 21:33:30 +0000] rev 108
Add quadrature channel A/B reporting to plunger status report
Add two pins I missed for the diagnostic LED checks (plunger calibration button and LED pins)
2020-02-03, by mjr [Mon, 03 Feb 2020 22:09:37 +0000] rev 107
Add two pins I missed for the diagnostic LED checks (plunger calibration button and LED pins)