stm32746g_discovery_qspi.h

00001 /**
00002   ******************************************************************************
00003   * @file    stm32746g_discovery_qspi.h
00004   * @author  MCD Application Team
00005   * @brief   This file contains the common defines and functions prototypes for
00006   *          the stm32746g_discovery_qspi.c driver.
00007   ******************************************************************************
00008   * @attention
00009   *
00010   * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
00011   *
00012   * Redistribution and use in source and binary forms, with or without modification,
00013   * are permitted provided that the following conditions are met:
00014   *   1. Redistributions of source code must retain the above copyright notice,
00015   *      this list of conditions and the following disclaimer.
00016   *   2. Redistributions in binary form must reproduce the above copyright notice,
00017   *      this list of conditions and the following disclaimer in the documentation
00018   *      and/or other materials provided with the distribution.
00019   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00020   *      may be used to endorse or promote products derived from this software
00021   *      without specific prior written permission.
00022   *
00023   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00024   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00025   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00026   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00027   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00028   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00029   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00030   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00031   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00032   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00033   *
00034   ******************************************************************************
00035   */ 
00036 
00037 /** @addtogroup BSP
00038   * @{
00039   */ 
00040 
00041 /** @addtogroup STM32746G_DISCOVERY
00042   * @{
00043   */
00044     
00045 /* Define to prevent recursive inclusion -------------------------------------*/
00046 #ifndef __STM32746G_DISCOVERY_QSPI_H
00047 #define __STM32746G_DISCOVERY_QSPI_H
00048 
00049 #ifdef __cplusplus
00050  extern "C" {
00051 #endif 
00052 
00053 /* Includes ------------------------------------------------------------------*/
00054 #include "stm32f7xx_hal.h"
00055 #include "../Components/n25q128a/n25q128a.h"
00056 
00057 /** @addtogroup STM32746G_DISCOVERY_QSPI
00058   * @{
00059   */    
00060 
00061   
00062 /* Exported constants --------------------------------------------------------*/ 
00063 /** @defgroup STM32746G_DISCOVERY_QSPI_Exported_Constants STM32746G_DISCOVERY_QSPI Exported Constants
00064   * @{
00065   */
00066 /* QSPI Error codes */
00067 #define QSPI_OK            ((uint8_t)0x00)
00068 #define QSPI_ERROR         ((uint8_t)0x01)
00069 #define QSPI_BUSY          ((uint8_t)0x02)
00070 #define QSPI_NOT_SUPPORTED ((uint8_t)0x04)
00071 #define QSPI_SUSPENDED     ((uint8_t)0x08)
00072 
00073 
00074 /* Definition for QSPI clock resources */
00075 #define QSPI_CLK_ENABLE()          __HAL_RCC_QSPI_CLK_ENABLE()
00076 #define QSPI_CLK_DISABLE()         __HAL_RCC_QSPI_CLK_DISABLE()
00077 #define QSPI_CS_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOB_CLK_ENABLE()
00078 #define QSPI_CLK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
00079 #define QSPI_D0_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOD_CLK_ENABLE()
00080 #define QSPI_D1_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOD_CLK_ENABLE()
00081 #define QSPI_D2_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOE_CLK_ENABLE()
00082 #define QSPI_D3_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOD_CLK_ENABLE()
00083 
00084 #define QSPI_FORCE_RESET()         __HAL_RCC_QSPI_FORCE_RESET()
00085 #define QSPI_RELEASE_RESET()       __HAL_RCC_QSPI_RELEASE_RESET()
00086 
00087 /* Definition for QSPI Pins */
00088 #define QSPI_CS_PIN                GPIO_PIN_6
00089 #define QSPI_CS_GPIO_PORT          GPIOB
00090 #define QSPI_CLK_PIN               GPIO_PIN_2
00091 #define QSPI_CLK_GPIO_PORT         GPIOB
00092 #define QSPI_D0_PIN                GPIO_PIN_11
00093 #define QSPI_D0_GPIO_PORT          GPIOD
00094 #define QSPI_D1_PIN                GPIO_PIN_12
00095 #define QSPI_D1_GPIO_PORT          GPIOD
00096 #define QSPI_D2_PIN                GPIO_PIN_2
00097 #define QSPI_D2_GPIO_PORT          GPIOE
00098 #define QSPI_D3_PIN                GPIO_PIN_13
00099 #define QSPI_D3_GPIO_PORT          GPIOD
00100 
00101 /* N25Q128A13EF840E Micron memory */
00102 /* Size of the flash */
00103 #define QSPI_FLASH_SIZE            23     /* Address bus width to access whole memory space */
00104 #define QSPI_PAGE_SIZE             256
00105 
00106 /* This alias is added as the name of Memory mapped fucntion changed */   
00107 #define BSP_QSPI_MemoryMappedMode  BSP_QSPI_EnableMemoryMappedMode   
00108 /**
00109   * @}
00110   */
00111 
00112 /* Exported types ------------------------------------------------------------*/
00113 /** @defgroup STM32746G_DISCOVERY_QSPI_Exported_Types STM32746G_DISCOVERY_QSPI Exported Types
00114   * @{
00115   */
00116 /* QSPI Info */
00117 typedef struct {
00118   uint32_t FlashSize;          /*!< Size of the flash */
00119   uint32_t EraseSectorSize;    /*!< Size of sectors for the erase operation */
00120   uint32_t EraseSectorsNumber; /*!< Number of sectors for the erase operation */
00121   uint32_t ProgPageSize;       /*!< Size of pages for the program operation */
00122   uint32_t ProgPagesNumber;    /*!< Number of pages for the program operation */
00123 } QSPI_Info;
00124 
00125 /**
00126   * @}
00127   */
00128 
00129   
00130 /* Exported functions --------------------------------------------------------*/
00131 /** @addtogroup STM32746G_DISCOVERY_QSPI_Exported_Functions
00132   * @{
00133   */  
00134 uint8_t BSP_QSPI_Init       (void);
00135 uint8_t BSP_QSPI_DeInit     (void);
00136 uint8_t BSP_QSPI_Read       (uint8_t* pData, uint32_t ReadAddr, uint32_t Size);
00137 uint8_t BSP_QSPI_Write      (uint8_t* pData, uint32_t WriteAddr, uint32_t Size);
00138 uint8_t BSP_QSPI_Erase_Block(uint32_t BlockAddress);
00139 uint8_t BSP_QSPI_Erase_Chip (void);
00140 uint8_t BSP_QSPI_GetStatus  (void);
00141 uint8_t BSP_QSPI_GetInfo    (QSPI_Info* pInfo);
00142 uint8_t BSP_QSPI_EnableMemoryMappedMode(void);
00143 
00144 /* These functions can be modified in case the current settings
00145    need to be changed for specific application needs */
00146 void BSP_QSPI_MspInit(QSPI_HandleTypeDef *hqspi, void *Params);
00147 void BSP_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi, void *Params);
00148 
00149 /**
00150   * @}
00151   */ 
00152 
00153 /**
00154   * @}
00155   */ 
00156 
00157 #ifdef __cplusplus
00158 }
00159 #endif
00160 
00161 #endif /* __STM32746G_DISCOVERY_QSPI_H */
00162 /**
00163   * @}
00164   */ 
00165 
00166 /**
00167   * @}
00168   */ 
00169 
00170 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/