Revision 13:684b0c5c94fa, committed 2017-03-12

Comitter:

annalou

Date:

Sun Mar 12 23:59:05 2017 +0000

Parent:

12:10e6d0d12833

Commit message:

Midterm Single tap filling parameters for z - axis

Changed in this revision

--- a/KL46z_single_tap_2017.cpp	Thu Mar 09 02:37:39 2017 +0000
+++ b/KL46z_single_tap_2017.cpp	Sun Mar 12 23:59:05 2017 +0000
@@ -2,6 +2,7 @@
 #include "MMA8451Q8g.h"
 #include "SLCD.h"
 
+#define PROGNAME "ParameterFill_AnnaLouise Martinez\n\r"
 #define BLINKTIME   1.5
 #define RELAYON     0
 #define RELAYOFF    1
@@ -29,14 +30,14 @@
 You need to fill nn the missing numbers below for this to work
 0x00 is just a place holder 
 *************************************/
-#define LATCH_DATA        0x00  // for use in REG_PULSE_CFG
-#define AXIS_DATA         0x00
-#define SET_INTERRUPT     0x00     //using interrupt INT1 PTC5
-#define SET_INT_LINE      0x00
+#define LATCH_DATA        0x21  // for use in REG_PULSE_CFG
+#define AXIS_DATA         0x05
+#define SET_INTERRUPT     0x2F     //using interrupt INT1 PTC5
+#define SET_INT_LINE      0x2F
 
-#define SET_THZ           0x00      //  See Table 49 in data sheet
+#define SET_THZ           800      //  See Table 49 in data sheet
 
-#define SET_TMLT          0x00      // See Table 51 in data sheet
+#define SET_TMLT          0X9F      //0000_0159     // See Table 51 in data sheet
 /*********************************************************/
 
 //#define PRINTDBUG
@@ -65,6 +66,7 @@
 int relayState = RELAYOFF;
 int outState = false;
 SLCD slcd; //define LCD display
+Serial pc(USBTX, USBRX);
 char LCDMessages[2][LCDLEN] = {"TRUE", "FALS"};
 
 
@@ -97,6 +99,7 @@
 
 int main()
 {
+    pc.printf(PROGNAME);
     uint8_t regData; 
     
 
@@ -125,14 +128,14 @@
     LCDMess(lcdData,BLINKTIME);     
     
 // Check to see if accerlometer is alive and well
-    acc.setGLimit(MAX_4G); // For now set to 2g
+    acc.setGLimit(MAX_2G); // For now set to 2g
     acc.readRegs(XYZ_DATA_CFG, &regData, 1);
     sprintf (lcdData,"%x",regData); // Note displaying in hexidecimal
     LCDMess(lcdData,BLINKTIME);
     
 // Setup single-tap pulse prarameters.
-   acc.setRegisterInStandby(REG_PULSE_THSZ, SET_THZ); // write the data
-   acc.setRegisterInStandby(REH_PULSE_TMLT, SET_TMLT); // write the data 
+   acc.setRegisterInStandby(REG_PULSE_THSZ,SET_THZ); // write the data
+   acc.setRegisterInStandby(REH_PULSE_TMLT,SET_TMLT); // write the data 
       
 // Set up (pulse) interrupt to INT1 pin
     acc.setRegisterInStandby(REG_CTRL_4, SET_INTERRUPT); // write the data
@@ -147,6 +150,7 @@
     while (true) { 
         acc.readRegs(REG_PULSE_SRC, &regData, 1);
         sprintf (lcdData,"%x",regData);
+        pc.printf(lcdData,"%x",regData);
         LCDMess(lcdData,BLINKTIME);           
         LCDMessNoDwell(LCDMessages[relayState]);  
         wait(delay);