STM32F103C8T6_WIFI_Heating_system
Dependencies: mbed mbed-STM32F103C8T6 eeprom_flash Watchdog PinDetect DS1820
- Bluepill STM32F103C8T6 Heating system
- _This project is core part of bigger heating system project!_
Features
- Reading temperature from four DS18B20 sensors
- Making a decision about switching on/off heater and pomp
- Executing simple user commands from UART
- Storing state parameters to program memory (EEPROM emulation)
main.cpp
- Committer:
- hudakz
- Date:
- 2016-09-15
- Revision:
- 10:4b88be251088
- Parent:
- 9:d3fb631890d7
- Child:
- 12:187e02ab447f
File content as of revision 10:4b88be251088:
#include "stm32f103c8t6.h" #include "mbed.h" int main() { confSysClock(); //Configure system clock (72MHz HSE clock, 48MHz USB clock) Serial pc(PA_2, PA_3); DigitalOut myled(LED1); while(1) { // The on-board LED is connected, via a resistor, to +3.3V (not to GND). // So to turn the LED on or off we have to set it to 0 or 1 respectively myled = 0; // turn the LED on wait_ms(200); // 200 millisecond myled = 1; // turn the LED off wait_ms(1000); // 1000 millisecond pc.printf("Blink\r\n"); } }