Revision 2:983fdd709bf7, committed 2017-11-09

Comitter:

amithy

Date:

Thu Nov 09 22:14:56 2017 +0000

Parent:

1:5da6f6de3e42

Commit message:

test export

Changed in this revision

diff -r 5da6f6de3e42 -r 983fdd709bf7 Dht11.cpp
--- a/Dht11.cpp	Mon Feb 16 01:43:08 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,89 +0,0 @@
-#include "Dht11.h"
-
-Dht11::Dht11(PinName const &p) : _pin(p) {
-    // Set creation time so we can make 
-    // sure we pause at least 1 second for 
-    // startup.
-    _timer.start();
-    
-    _temperature = 0;
-    _humidity = 0;
-}
-
-int Dht11::read()
-{
-    // BUFFER TO RECEIVE
-    uint8_t bits[5];
-    uint8_t cnt = 7;
-    uint8_t idx = 0;
-
-    // EMPTY BUFFER
-    for (int i=0; i< 5; i++) bits[i] = 0;
-    
-    // Verify sensor settled after boot
-    while(_timer.read_ms() < 1500) {}
-    _timer.stop();
-
-    // Notify it we are ready to read
-    _pin.output();
-    _pin = 0;
-    wait_ms(18);
-    _pin = 1;
-    wait_us(40);
-    _pin.input();
-
-    // ACKNOWLEDGE or TIMEOUT
-    unsigned int loopCnt = 10000;
-    while(_pin == 0)
-        if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
-
-    loopCnt = 10000;
-    while(_pin == 1)
-        if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
-
-    // READ OUTPUT - 40 BITS => 5 BYTES or TIMEOUT
-    for (int i=0; i<40; i++)
-    {
-        loopCnt = 10000;
-        while(_pin == 0)
-            if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
-
-        //unsigned long t = micros();
-        Timer t;
-        t. start();
-
-        loopCnt = 10000;
-        while(_pin == 1)
-            if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
-
-        if (t.read_us() > 40) bits[idx] |= (1 << cnt);
-        if (cnt == 0)   // next byte?
-        {
-            cnt = 7;    // restart at MSB
-            idx++;      // next byte!
-        }
-        else cnt--;
-    }
-
-    // WRITE TO RIGHT VARS
-    // as bits[1] and bits[3] are allways zero they are omitted in formulas.
-    _humidity    = bits[0]; 
-    _temperature = bits[2]; 
-
-    uint8_t sum = bits[0] + bits[2];  
-
-    if (bits[4] != sum) return DHTLIB_ERROR_CHECKSUM;
-    return DHTLIB_OK;
-}
-
-float Dht11::getFahrenheit() {
-    return((_temperature * 1.8) + 32);
-}
-
-int Dht11::getCelsius() {
-    return(_temperature);
-}
-
-int Dht11::getHumidity() {
-    return(_humidity);
-}

diff -r 5da6f6de3e42 -r 983fdd709bf7 Dht11.h
--- a/Dht11.h	Mon Feb 16 01:43:08 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-#ifndef DHT11_H
-#define DHT11_H
-
-#include "mbed.h"
-
-#define DHTLIB_OK                0
-#define DHTLIB_ERROR_CHECKSUM   -1
-#define DHTLIB_ERROR_TIMEOUT    -2
-
-/** Class for the DHT11 sensor.
- * 
- * Example:
- * @code
- * #include "mbed.h"
- * #include "Dht11.h"
- *
- * Serial pc(USBTX, USBRX);
- * Dht11 sensor(PTD7);
- * 
- * int main() {
- *     sensor.read()
- *     pc.printf("T: %f, H: %d\r\n", sensor.getFahrenheit(), sensor.getHumidity());
- * }
- * @endcode
- */
-class Dht11
-{
-public:
-    /** Construct the sensor object.
-     *
-     * @param pin PinName for the sensor pin.
-     */
-    Dht11(PinName const &p);
-    
-    /** Update the humidity and temp from the sensor.
-     *
-     * @returns
-     *   0 on success, otherwise error.
-     */
-    int read();
-    
-    /** Get the temp(f) from the saved object.
-     *
-     * @returns
-     *   Fahrenheit float
-     */
-    float getFahrenheit();
-    
-    /** Get the temp(c) from the saved object.
-     *
-     * @returns
-     *   Celsius int
-     */
-    int getCelsius();
-    
-    /** Get the humidity from the saved object.
-     *
-     * @returns
-     *   Humidity percent int
-     */
-    int getHumidity();
-
-private:
-    /// percentage of humidity
-    int _humidity;
-    /// celsius
-    int _temperature;
-    /// pin to read the sensor info on
-    DigitalInOut _pin;
-    /// times startup (must settle for at least a second)
-    Timer _timer;
-};
-
-#endif

diff -r 5da6f6de3e42 -r 983fdd709bf7 Dht22.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Dht22.cpp	Thu Nov 09 22:14:56 2017 +0000
@@ -0,0 +1,104 @@
+#include "Dht22.h"
+
+Dht22::Dht22(PinName const &p) : _pin(p) {
+    // Set creation time so we can make 
+    // sure we pause at least 1 second for 
+    // startup.
+    _timer.start();
+    
+    _temperature = 0;
+    _humidity = 0;
+}
+
+int Dht22::read()
+{
+    // BUFFER TO RECEIVE
+    uint8_t bits[5];
+    uint8_t cnt = 7;
+    uint8_t idx = 0;
+
+    // EMPTY BUFFER
+    for (int i=0; i< 5; i++) bits[i] = 0;
+    
+    // Verify sensor settled after boot
+    while(_timer.read_ms() < 1500) {}
+    _timer.stop();
+
+    // Notify it we are ready to read
+    _pin.output();
+    _pin = 0;
+    wait_ms(18);
+    _pin = 1;
+    wait_us(40);
+    _pin.input();
+
+    // ACKNOWLEDGE or TIMEOUT
+    unsigned int loopCnt = 10000;
+    while(_pin == 0)
+        if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
+
+    loopCnt = 10000;
+    while(_pin == 1)
+        if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
+
+    // READ OUTPUT - 40 BITS => 5 BYTES or TIMEOUT
+    for (int i=0; i<40; i++)
+    {
+        loopCnt = 10000;
+        while(_pin == 0)
+            if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
+
+        //unsigned long t = micros();
+        Timer t;
+        t. start();
+
+        loopCnt = 10000;
+        while(_pin == 1)
+            if (loopCnt-- == 0) return DHTLIB_ERROR_TIMEOUT;
+
+        if (t.read_us() > 40) bits[idx] |= (1 << cnt);
+        if (cnt == 0)   // next byte?
+        {
+            cnt = 7;    // restart at MSB
+            idx++;      // next byte!
+        }
+        else cnt--;
+    }
+
+//    // WRITE TO RIGHT VARS - DHT22
+//    // as bits[1] and bits[3] are allways zero they are omitted in formulas.
+//    _humidity    = bits[0]; 
+//    _temperature = bits[2]; 
+//
+//    uint8_t sum = bits[0] + bits[2];  
+//
+//    if (bits[4] != sum) return DHTLIB_ERROR_CHECKSUM;
+    
+    
+    uint8_t dht22_check_sum;
+    dht22_check_sum = bits[0] + bits[1] + bits[2] + bits[3];
+    //printf("dht22 check sum: %d",dht22_check_sum);
+    dht22_check_sum= dht22_check_sum%256;
+    //printf("dht22 check sum: %d",dht22_check_sum);
+    
+    if (dht22_check_sum == bits[4]) {
+        _humidity = bits[0]*256 + bits[1];
+        
+        _temperature = bits[2]*256 + bits[3];
+        //printf("all good \n");
+        return DHTLIB_OK;
+    }
+    return DHTLIB_ERROR_CHECKSUM;
+}
+
+float Dht22::getFahrenheit() {
+    return((_temperature * 1.8) + 32);
+}
+
+int Dht22::getCelsius() {
+    return(_temperature);
+}
+
+int Dht22::getHumidity() {
+    return(_humidity);
+}

diff -r 5da6f6de3e42 -r 983fdd709bf7 Dht22.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Dht22.h	Thu Nov 09 22:14:56 2017 +0000
@@ -0,0 +1,74 @@
+#ifndef DHT22_H
+#define DHT22_H
+
+#include "mbed.h"
+
+#define DHTLIB_OK                0
+#define DHTLIB_ERROR_CHECKSUM   -1
+#define DHTLIB_ERROR_TIMEOUT    -2
+
+/** Class for the DHT22 sensor.
+ * 
+ * Example:
+ * @code
+ * #include "mbed.h"
+ * #include "Dht22.h"
+ *
+ * Serial pc(USBTX, USBRX);
+ * Dht22 sensor(PTD7);
+ * 
+ * int main() {
+ *     sensor.read()
+ *     pc.printf("T: %f, H: %d\r\n", sensor.getFahrenheit(), sensor.getHumidity());
+ * }
+ * @endcode
+ */
+class Dht22
+{
+public:
+    /** Construct the sensor object.
+     *
+     * @param pin PinName for the sensor pin.
+     */
+    Dht22(PinName const &p);
+    
+    /** Update the humidity and temp from the sensor.
+     *
+     * @returns
+     *   0 on success, otherwise error.
+     */
+    int read();
+    
+    /** Get the temp(f) from the saved object.
+     *
+     * @returns
+     *   Fahrenheit float
+     */
+    float getFahrenheit();
+    
+    /** Get the temp(c) from the saved object.
+     *
+     * @returns
+     *   Celsius int
+     */
+    int getCelsius();
+    
+    /** Get the humidity from the saved object.
+     *
+     * @returns
+     *   Humidity percent int
+     */
+    int getHumidity();
+
+private:
+    /// percentage of humidity
+    int _humidity;
+    /// celsius
+    int _temperature;
+    /// pin to read the sensor info on
+    DigitalInOut _pin;
+    /// times startup (must settle for at least a second)
+    Timer _timer;
+};
+
+#endif

diff -r 5da6f6de3e42 -r 983fdd709bf7 mbed.bld
--- a/mbed.bld	Mon Feb 16 01:43:08 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/e188a91d3eaa
\ No newline at end of file