Diff: main.cpp

Revision:

1:0f1be4e75668

Parent:

0:4dd6b327586a

--- a/main.cpp	Mon May 28 00:01:35 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,91 +0,0 @@
-/****************************************************************************
- *   $Id:: blinky.c 9190 2012-02-16 20:59:45Z nxp41306                      $
- *   Project: NXP LPC11xx Blinky example
- *
- *   Description:
- *     This file contains LED blink code example which include timer, 
- *     GPIO initialization, and clock monitoring.
- *
- ****************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * NXP Semiconductors assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. NXP Semiconductors
- * reserves the right to make changes in the software without
- * notification. NXP Semiconductors also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
-****************************************************************************/
-#include <LPC11Uxx.h>                    /* LPC11Uxx definitions */
-#include "timer16.h"
-#include "clkconfig.h"
-#include "gpio.h"
-#include "nmi.h"
-
-#define TEST_TIMER_NUM        0        /* 0 or 1 for 16-bit timers only */
-
-extern volatile uint32_t timer16_0_counter[2];
-extern volatile uint32_t timer16_1_counter[2];
-
-/* Main Program */
-
-int main (void) {
-  uint32_t interval;
-
-  SystemCoreClockUpdate();
-
-  /* Config CLKOUT, mostly used for debugging. */
- // CLKOUT_Setup( CLKOUTCLK_SRC_MAIN_CLK );
- // LPC_IOCON->PIO0_1 &= ~0x07;    
- // LPC_IOCON->PIO0_1 |= 0x01;        /* CLK OUT */
-
-  /* Enable AHB clock to the GPIO domain. */
-  LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6);
-
-  /* TEST_TIMER_NUM is either 0 or 1 for 16-bit timer 0 or 1. */
-  interval = SystemCoreClock/1000 - 1;
-  if ( interval > 0xFFFF )
-  {
-    interval = 0xFFFF;
-  }
-  init_timer16(TEST_TIMER_NUM, interval);
-  enable_timer16(TEST_TIMER_NUM);
-
-  /* Set port 1_8 to output */
-  GPIOSetDir( 1, 8, 1 );
-
-  while (1)                                /* Loop forever */
-  {
-#if TEST_TIMER_NUM
-    /* I/O configuration and LED setting pending. */
-    if ( (timer16_1_counter[0] > 0) && (timer16_1_counter[0] <= 200) )
-    {
-      GPIOSetBitValue( 1, 8, 0 );
-    }
-    if ( (timer16_1_counter[0] > 200) && (timer16_1_counter[0] <= 400) )
-    {
-      GPIOSetBitValue( 1, 8, 1 );
-    }
-    else if ( timer16_1_counter[0] > 400 )
-    {
-      timer16_1_counter[0] = 0;
-    }
-#else
-    /* I/O configuration and LED setting pending. */
-    if ( (timer16_0_counter[0] > 0) && (timer16_0_counter[0] <= 200) )
-    {
-      GPIOSetBitValue( 1, 8, 0 );
-    }
-    if ( (timer16_0_counter[0] > 200) && (timer16_0_counter[0] <= 400) )
-    {
-      GPIOSetBitValue( 1, 8, 1 );
-    }
-    else if ( timer16_0_counter[0] > 400 )
-    {
-      timer16_0_counter[0] = 0;
-    }
-#endif
-  }
-}