Alexan E
The common folder libraries from keil LPC11Uxx code bundle
Revision 0:05d110ee258e, committed 2012-05-27
- Comitter:
- alexan_e
- Date:
- Sun May 27 23:59:30 2012 +0000
- Commit message:
Changed in this revision
diff -r 000000000000 -r 05d110ee258e clkconfig.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/clkconfig.c Sun May 27 23:59:30 2012 +0000
@@ -0,0 +1,76 @@
+/****************************************************************************
+ * $Id:: clkconfig.c 9190 2012-02-16 20:59:45Z nxp41306 $
+ * Project: NXP LPC11Uxx Clock Configuration example
+ *
+ * Description:
+ * This file contains clock configuration code example which include
+ * watchdog setup and debug clock out setup.
+ *
+****************************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+
+****************************************************************************/
+
+#include "LPC11Uxx.h"
+#include "clkconfig.h"
+
+
+/*****************************************************************************
+** Function name: WDT_CLK_Setup
+**
+** Descriptions: Configure WDT clock.
+** parameters: clock source: irc_osc(0), main_clk(1), wdt_osc(2).
+**
+** Returned value: None
+**
+*****************************************************************************/
+void WDT_CLK_Setup ( uint32_t clksrc )
+{
+ /* Freq = 0.5Mhz, div_sel is 0x1F, divided by 64. WDT_OSC should be 7.8125khz */
+ LPC_SYSCON->WDTOSCCTRL = (0x1<<5)|0x1F;
+ LPC_SYSCON->PDRUNCFG &= ~(0x1<<6); /* Let WDT clock run */
+
+ /* Enables clock for WDT */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<15);
+ LPC_WWDT->CLKSEL = clksrc; /* Select clock source */
+ return;
+}
+
+/*****************************************************************************
+** Function name: CLKOUT_Setup
+**
+** Descriptions: Configure CLKOUT for reference clock check.
+** parameters: clock source: irc_osc(0), sys_osc(1), wdt_osc(2),
+** main_clk(3).
+**
+** Returned value: None
+**
+*****************************************************************************/
+void CLKOUT_Setup ( uint32_t clksrc )
+{
+ /* debug PLL after configuration. */
+ LPC_SYSCON->CLKOUTSEL = clksrc; /* Select Main clock */
+ LPC_SYSCON->CLKOUTUEN = 0x01; /* Update clock */
+ LPC_SYSCON->CLKOUTUEN = 0x00; /* Toggle update register once */
+ LPC_SYSCON->CLKOUTUEN = 0x01;
+ while ( !(LPC_SYSCON->CLKOUTUEN & 0x01) ); /* Wait until updated */
+ LPC_SYSCON->CLKOUTDIV = 1; /* Divided by 1 */
+ return;
+}
+
diff -r 000000000000 -r 05d110ee258e clkconfig.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/clkconfig.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,44 @@ +/**************************************************************************** + * $Id:: clkconfig.h 6172 2011-01-13 18:22:51Z usb00423 $ + * Project: NXP LPC11xx software example + * + * Description: + * This file contains definition and prototype for clock configuration. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __CLKCONFIG_H +#define __CLKCONFIG_H + +#define SYSPLL_SRC_IRC_OSC 0 +#define SYSPLL_SRC_SYS_OSC 1 + +#define MAINCLK_SRC_IRC_OSC 0 +#define MAINCLK_SRC_SYSPLL_IN 1 +#define MAINCLK_SRC_WDT_OSC 2 +#define MAINCLK_SRC_SYS_PLL 3 + +#define WDTCLK_SRC_IRC_OSC 0 +#define WDTCLK_SRC_WDT_OSC 1 + +#define CLKOUTCLK_SRC_IRC_OSC 0 +#define CLKOUTCLK_SRC_SYS_OSC 1 +#define CLKOUTCLK_SRC_WDT_OSC 2 +#define CLKOUTCLK_SRC_MAIN_CLK 3 + +void WDT_CLK_Setup(uint32_t timer_num); +void CLKOUT_Setup(uint32_t timer_num); +#endif /* end __CLKCONFIG_H */ +/***************************************************************************** +** End Of File +******************************************************************************/
diff -r 000000000000 -r 05d110ee258e gpio.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/gpio.c Sun May 27 23:59:30 2012 +0000
@@ -0,0 +1,827 @@
+/****************************************************************************
+ * $Id:: gpio.c 9190 2012-02-16 20:59:45Z nxp41306 $
+ * Project: NXP LPC11Uxx GPIO example
+ *
+ * Description:
+ * This file contains GPIO code example which include GPIO
+ * initialization, GPIO interrupt handler, and related APIs for
+ * GPIO access.
+*
+****************************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+
+****************************************************************************/
+
+#include "LPC11Uxx.h" /* LPC11xx Peripheral Registers */
+#include "gpio.h"
+
+volatile uint32_t flex_int0_counter = 0;
+volatile uint32_t flex_int1_counter = 0;
+volatile uint32_t flex_int2_counter = 0;
+volatile uint32_t flex_int3_counter = 0;
+volatile uint32_t flex_int4_counter = 0;
+volatile uint32_t flex_int5_counter = 0;
+volatile uint32_t flex_int6_counter = 0;
+volatile uint32_t flex_int7_counter = 0;
+volatile uint32_t gint0_counter = 0;
+volatile uint32_t gint1_counter = 0;
+volatile uint32_t flex_int0_level_counter = 0;
+volatile uint32_t flex_int0_rising_edge_counter = 0;
+volatile uint32_t flex_int0_falling_edge_counter = 0;
+volatile uint32_t flex_int1_level_counter = 0;
+volatile uint32_t flex_int1_rising_edge_counter = 0;
+volatile uint32_t flex_int1_falling_edge_counter = 0;
+volatile uint32_t flex_int2_level_counter = 0;
+volatile uint32_t flex_int2_rising_edge_counter = 0;
+volatile uint32_t flex_int2_falling_edge_counter = 0;
+volatile uint32_t flex_int3_level_counter = 0;
+volatile uint32_t flex_int3_rising_edge_counter = 0;
+volatile uint32_t flex_int3_falling_edge_counter = 0;
+volatile uint32_t flex_int4_level_counter = 0;
+volatile uint32_t flex_int4_rising_edge_counter = 0;
+volatile uint32_t flex_int4_falling_edge_counter = 0;
+volatile uint32_t flex_int5_level_counter = 0;
+volatile uint32_t flex_int5_rising_edge_counter = 0;
+volatile uint32_t flex_int5_falling_edge_counter = 0;
+volatile uint32_t flex_int6_level_counter = 0;
+volatile uint32_t flex_int6_rising_edge_counter = 0;
+volatile uint32_t flex_int6_falling_edge_counter = 0;
+volatile uint32_t flex_int7_level_counter = 0;
+volatile uint32_t flex_int7_rising_edge_counter = 0;
+volatile uint32_t flex_int7_falling_edge_counter = 0;
+volatile uint32_t gint0_level_counter = 0;
+volatile uint32_t gint0_edge_counter = 0;
+volatile uint32_t gint1_level_counter = 0;
+volatile uint32_t gint1_edge_counter = 0;
+
+/*****************************************************************************
+** Function name: FLEX_INT0_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT0_IRQHandler(void)
+{
+ flex_int0_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<0) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<0) )
+ {
+ flex_int0_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<0) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<0) ) )
+ {
+ flex_int0_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<0;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<0) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<0) ) )
+ {
+ flex_int0_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<0;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<0;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT1_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT1_IRQHandler(void)
+{
+ flex_int1_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<1) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<1) )
+ {
+ flex_int1_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<1) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<1) ) )
+ {
+ flex_int1_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<1;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<1) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<1) ) )
+ {
+ flex_int1_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<1;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<1;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT2_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT2_IRQHandler(void)
+{
+ flex_int2_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<2) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<2) )
+ {
+ flex_int2_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<2) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<2) ) )
+ {
+ flex_int2_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<2;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<2) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<2) ) )
+ {
+ flex_int2_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<2;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<2;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT3_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT3_IRQHandler(void)
+{
+ flex_int3_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<3) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<3) )
+ {
+ flex_int3_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<3) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<3) ) )
+ {
+ flex_int3_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<3;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<3) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<3) ) )
+ {
+ flex_int3_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<3;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<3;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT4_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT4_IRQHandler(void)
+{
+ flex_int4_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<4) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<4) )
+ {
+ flex_int4_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<4) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<4) ) )
+ {
+ flex_int4_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<4;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<4) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<4) ) )
+ {
+ flex_int4_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<4;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<4;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT5_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT5_IRQHandler(void)
+{
+ flex_int5_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<5) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<5) )
+ {
+ flex_int5_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<5) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<5) ) )
+ {
+ flex_int5_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<5;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<5) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<5) ) )
+ {
+ flex_int5_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<5;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<5;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT6_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT6_IRQHandler(void)
+{
+ flex_int6_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<6) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<6) )
+ {
+ flex_int6_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<6) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<6) ) )
+ {
+ flex_int6_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<6;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<6) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<6) ) )
+ {
+ flex_int6_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<6;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<6;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: FLEX_INT7_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void FLEX_INT7_IRQHandler(void)
+{
+ flex_int7_counter++;
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<7) )
+ {
+ if ( LPC_GPIO_PIN_INT->ISEL & (0x1<<7) )
+ {
+ flex_int7_level_counter++;
+ }
+ else
+ {
+ if ( ( LPC_GPIO_PIN_INT->RISE & (0x1<<7) ) && ( LPC_GPIO_PIN_INT->IENR & (0x1<<7) ) )
+ {
+ flex_int7_rising_edge_counter++;
+ LPC_GPIO_PIN_INT->RISE = 0x1<<7;
+ }
+ if ( ( LPC_GPIO_PIN_INT->FALL & (0x1<<7) ) && ( LPC_GPIO_PIN_INT->IENF & (0x1<<7) ) )
+ {
+ flex_int7_falling_edge_counter++;
+ LPC_GPIO_PIN_INT->FALL = 0x1<<7;
+ }
+ LPC_GPIO_PIN_INT->IST = 0x1<<7;
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GINT0_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GINT0_IRQHandler(void)
+{
+ gint0_counter++;
+ if ( LPC_GPIO_GROUP_INT0->CTRL & 0x1 )
+ {
+ if ( LPC_GPIO_GROUP_INT0->CTRL & (0x1<<2) )
+ {
+ gint0_level_counter++;
+ }
+ else
+ {
+ gint0_edge_counter++;
+ }
+ LPC_GPIO_GROUP_INT0->CTRL |= 0x1;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GINT1_IRQHandler
+**
+** Descriptions: Use one GPIO pin as interrupt source
+**
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GINT1_IRQHandler(void)
+{
+ gint1_counter++;
+ if ( LPC_GPIO_GROUP_INT1->CTRL & 0x1 )
+ {
+ if ( LPC_GPIO_GROUP_INT1->CTRL & (0x1<<2) )
+ {
+ gint1_level_counter++;
+ }
+ else
+ {
+ gint1_edge_counter++;
+ }
+ LPC_GPIO_GROUP_INT1->CTRL |= 0x1;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOInit
+**
+** Descriptions: Initialize GPIO, install the
+** GPIO interrupt handler
+**
+** parameters: None
+**
+** Returned value: true or false, return false if the VIC table
+** is full and GPIO interrupt handler can be
+** installed.
+**
+*****************************************************************************/
+void GPIOInit( void )
+{
+ /* Enable AHB clock to the GPIO domain. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6);
+
+ /* Enable AHB clock to the FlexInt, GroupedInt domain. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= ((1<<19) | (1<<23) | (1<<24));
+
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOSetFlexInterrupt
+**
+** Descriptions: Set interrupt sense, event, etc.
+** sense: edge or level, 0 is edge, 1 is level
+** event/polarity: 0 is active low/falling, 1 is high/rising.
+**
+** parameters: channel #, port #, bit position, sense, event(polarity)
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOSetFlexInterrupt( uint32_t channelNum, uint32_t portNum, uint32_t bitPosi,
+ uint32_t sense, uint32_t event )
+{
+ switch ( channelNum )
+ {
+ case CHANNEL0:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[0] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[0] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT0_IRQn);
+ break;
+ case CHANNEL1:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[1] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[1] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT1_IRQn);
+ break;
+ case CHANNEL2:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[2] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[2] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT2_IRQn);
+ break;
+ case CHANNEL3:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[3] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[3] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT3_IRQn);
+ break;
+ case CHANNEL4:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[4] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[4] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT4_IRQn);
+ break;
+ case CHANNEL5:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[5] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[5] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT5_IRQn);
+ break;
+ case CHANNEL6:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[6] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[6] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT6_IRQn);
+ break;
+ case CHANNEL7:
+ if ( portNum )
+ {
+ LPC_SYSCON->PINTSEL[7] = bitPosi + 24;
+ }
+ else
+ {
+ LPC_SYSCON->PINTSEL[7] = bitPosi;
+ }
+ NVIC_EnableIRQ(FLEX_INT7_IRQn);
+ break;
+ default:
+ break;
+ }
+ if ( sense == 0 )
+ {
+ LPC_GPIO_PIN_INT->ISEL &= ~(0x1<<channelNum); /* Edge trigger */
+ if ( event == 0 )
+ {
+ LPC_GPIO_PIN_INT->IENF |= (0x1<<channelNum); /* faling edge */
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->IENR |= (0x1<<channelNum); /* Rising edge */
+ }
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->ISEL |= (0x1<<channelNum); /* Level trigger. */
+ LPC_GPIO_PIN_INT->IENR |= (0x1<<channelNum); /* Level enable */
+ if ( event == 0 )
+ {
+ LPC_GPIO_PIN_INT->IENF &= ~(0x1<<channelNum); /* active-low */
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->IENF |= (0x1<<channelNum); /* active-high */
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOFlexIntEnable
+**
+** Descriptions: Enable Interrupt
+**
+** parameters: channel num, event(0 is falling edge, 1 is rising edge)
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOFlexIntEnable( uint32_t channelNum, uint32_t event )
+{
+ if ( !( LPC_GPIO_PIN_INT->ISEL & (0x1<<channelNum) ) )
+ {
+ if ( event == 0 )
+ {
+ LPC_GPIO_PIN_INT->SIENF |= (0x1<<channelNum); /* faling edge */
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->SIENR |= (0x1<<channelNum); /* Rising edge */
+ }
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->SIENR |= (0x1<<channelNum); /* Level */
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOFlexIntDisable
+**
+** Descriptions: Disable Interrupt
+**
+** parameters: channel num, event(0 is falling edge, 1 is rising edge)
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOFlexIntDisable( uint32_t channelNum, uint32_t event )
+{
+ if ( !( LPC_GPIO_PIN_INT->ISEL & (0x1<<channelNum) ) )
+ {
+ if ( event == 0 )
+ {
+ LPC_GPIO_PIN_INT->CIENF |= (0x1<<channelNum); /* faling edge */
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->CIENR |= (0x1<<channelNum); /* Rising edge */
+ }
+ }
+ else
+ {
+ LPC_GPIO_PIN_INT->CIENR |= (0x1<<channelNum); /* Level */
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOFlexIntStatus
+**
+** Descriptions: Get Interrupt status
+**
+** parameters: channel num
+**
+** Returned value: None
+**
+*****************************************************************************/
+uint32_t GPIOFlexIntStatus( uint32_t channelNum )
+{
+ if ( LPC_GPIO_PIN_INT->IST & (0x1<<channelNum) )
+ {
+ return( 1 );
+ }
+ else
+ {
+ return( 0 );
+ }
+}
+
+/*****************************************************************************
+** Function name: GPIOFlexIntClear
+**
+** Descriptions: Clear Interrupt
+**
+** parameters: channel num
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOFlexIntClear( uint32_t channelNum )
+{
+ if ( !( LPC_GPIO_PIN_INT->ISEL & (0x1<<channelNum) ) )
+ {
+ LPC_GPIO_PIN_INT->IST = (1<<channelNum);
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOSetGroupedInterrupt
+**
+** Descriptions: Set interrupt logic, sense, eventPattern, etc.
+** logic: AND or OR, 0 is OR, 1 is AND
+** sensePattern: edge or level, 0 is edge, 1 is level
+** event/polarity: 0 is active low/falling, 1 is high/rising.
+**
+** parameters: group #, bit pattern, logic, sense, event(polarity) pattern
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOSetGroupedInterrupt( uint32_t groupNum, uint32_t *bitPattern, uint32_t logic,
+ uint32_t sense, uint32_t *eventPattern )
+{
+ switch ( groupNum )
+ {
+ case GROUP0:
+ if ( sense == 0 )
+ {
+ LPC_GPIO_GROUP_INT0->CTRL &= ~(0x1<<2); /* Edge trigger */
+ }
+ else
+ {
+ LPC_GPIO_GROUP_INT0->CTRL |= (0x1<<2); /* Level trigger. */
+ }
+ LPC_GPIO_GROUP_INT0->CTRL |= (logic<<1);
+ LPC_GPIO_GROUP_INT0->PORT_POL[0] = *((uint32_t *)(eventPattern + 0));
+ LPC_GPIO_GROUP_INT0->PORT_POL[1] = *((uint32_t *)(eventPattern + 1));
+ LPC_GPIO_GROUP_INT0->PORT_ENA[0] = *((uint32_t *)(bitPattern + 0));
+ LPC_GPIO_GROUP_INT0->PORT_ENA[1] = *((uint32_t *)(bitPattern + 1));
+ /* as soon as enabled, an edge may be generated */
+ /* clear interrupt flag and NVIC pending interrupt to */
+ /* workaround the potential edge generated as enabled */
+ LPC_GPIO_GROUP_INT0->CTRL |= (1<<0);
+ NVIC_ClearPendingIRQ(GINT0_IRQn);
+ NVIC_EnableIRQ(GINT0_IRQn);
+ break;
+ case GROUP1:
+ if ( sense == 0 )
+ {
+ LPC_GPIO_GROUP_INT1->CTRL &= ~(0x1<<2); /* Edge trigger */
+ }
+ else
+ {
+ LPC_GPIO_GROUP_INT1->CTRL |= (0x1<<2); /* Level trigger. */
+ }
+ LPC_GPIO_GROUP_INT1->CTRL |= (logic<<1);
+ LPC_GPIO_GROUP_INT1->PORT_POL[0] = *((uint32_t *)(eventPattern + 0));
+ LPC_GPIO_GROUP_INT1->PORT_POL[1] = *((uint32_t *)(eventPattern + 1));
+ LPC_GPIO_GROUP_INT1->PORT_ENA[0] = *((uint32_t *)(bitPattern + 0));
+ LPC_GPIO_GROUP_INT1->PORT_ENA[1] = *((uint32_t *)(bitPattern + 1));
+ /* as soon as enabled, an edge may be generated */
+ /* clear interrupt flag and NVIC pending interrupt to */
+ /* workaround the potential edge generated as enabled */
+ LPC_GPIO_GROUP_INT1->CTRL |= (1<<0);
+ NVIC_ClearPendingIRQ(GINT1_IRQn);
+ NVIC_EnableIRQ(GINT1_IRQn);
+ break;
+ default:
+ break;
+ }
+
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOGetPinValue
+**
+** Descriptions: Read Current state of port pin, PIN register value
+**
+** parameters: port num, bit position
+** Returned value: None
+**
+*****************************************************************************/
+uint32_t GPIOGetPinValue( uint32_t portNum, uint32_t bitPosi )
+{
+ uint32_t regVal = 0;
+
+ if( bitPosi < 0x20 )
+ {
+ if ( LPC_GPIO->PIN[portNum] & (0x1<<bitPosi) )
+ {
+ regVal = 1;
+ }
+ }
+ else if( bitPosi == 0xFF )
+ {
+ regVal = LPC_GPIO->PIN[portNum];
+ }
+ return ( regVal );
+}
+
+/*****************************************************************************
+** Function name: GPIOSetBitValue
+**
+** Descriptions: Set/clear a bit in a specific position
+**
+** parameters: port num, bit position, bit value
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOSetBitValue( uint32_t portNum, uint32_t bitPosi, uint32_t bitVal )
+{
+ if ( bitVal )
+ {
+ LPC_GPIO->SET[portNum] = 1<<bitPosi;
+ }
+ else
+ {
+ LPC_GPIO->CLR[portNum] = 1<<bitPosi;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: GPIOSetDir
+**
+** Descriptions: Set the direction in GPIO port
+**
+** parameters: portNum, bit position, direction (1 out, 0 input)
+**
+** Returned value: None
+**
+*****************************************************************************/
+void GPIOSetDir( uint32_t portNum, uint32_t bitPosi, uint32_t dir )
+{
+ if( dir )
+ {
+ LPC_GPIO->DIR[portNum] |= (1<<bitPosi);
+ }
+ else
+ {
+ LPC_GPIO->DIR[portNum] &= ~(1<<bitPosi);
+ }
+ return;
+}
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
diff -r 000000000000 -r 05d110ee258e gpio.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/gpio.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,64 @@ +/**************************************************************************** + * $Id:: gpio.h 6172 2011-01-13 18:22:51Z usb00423 $ + * Project: NXP LPC11xx software example + * + * Description: + * This file contains definition and prototype for GPIO. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __GPIO_H +#define __GPIO_H + +#define CHANNEL0 0 +#define CHANNEL1 1 +#define CHANNEL2 2 +#define CHANNEL3 3 +#define CHANNEL4 4 +#define CHANNEL5 5 +#define CHANNEL6 6 +#define CHANNEL7 7 + +#define PORT0 0 +#define PORT1 1 + +#define GROUP0 0 +#define GROUP1 1 + +void FLEX_INT0_IRQHandler(void); +void FLEX_INT1_IRQHandler(void); +void FLEX_INT2_IRQHandler(void); +void FLEX_INT3_IRQHandler(void); +void FLEX_INT4_IRQHandler(void); +void FLEX_INT5_IRQHandler(void); +void FLEX_INT6_IRQHandler(void); +void FLEX_INT7_IRQHandler(void); +void GINT0_IRQHandler(void); +void GINT1_IRQHandler(void); +void GPIOInit( void ); +void GPIOSetFlexInterrupt( uint32_t channelNum, uint32_t portNum, uint32_t bitPosi, + uint32_t sense, uint32_t event ); +void GPIOFlexIntEnable( uint32_t channelNum, uint32_t event ); +void GPIOFlexIntDisable( uint32_t channelNum, uint32_t event ); +uint32_t GPIOFlexIntStatus( uint32_t channelNum ); +void GPIOFlexIntClear( uint32_t channelNum ); +void GPIOSetGroupedInterrupt( uint32_t groupNum, uint32_t *bitPattern, uint32_t logic, + uint32_t sense, uint32_t *eventPattern ); +uint32_t GPIOGetPinValue( uint32_t portNum, uint32_t bitPosi ); +void GPIOSetBitValue( uint32_t portNum, uint32_t bitPosi, uint32_t bitVal ); +void GPIOSetDir( uint32_t portNum, uint32_t bitPosi, uint32_t dir ); + +#endif /* end __GPIO_H */ +/***************************************************************************** +** End Of File +******************************************************************************/
diff -r 000000000000 -r 05d110ee258e nmi.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nmi.c Sun May 27 23:59:30 2012 +0000
@@ -0,0 +1,98 @@
+/****************************************************************************
+ * $Id:: nmi.c 9190 2012-02-16 20:59:45Z nxp41306 $
+ * Project: NXP LPC11Uxx NMI interrupt example
+ *
+ * Description:
+ * This file contains NMI interrupt handler code example.
+*
+****************************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+
+****************************************************************************/
+
+#include "LPC11Uxx.h"
+#include "nmi.h"
+
+#if NMI_ENABLED
+volatile uint32_t NMI_Counter[MAX_NMI_NUM];
+
+/*****************************************************************************
+** Function name: NMI_Handler
+**
+** Descriptions: NMI interrupt handler
+** parameters: None
+**
+** Returned value: None
+**
+*****************************************************************************/
+void NMI_Handler( void )
+{
+ uint32_t regVal;
+
+ regVal = LPC_SYSCON->NMISRC;
+ regVal &= ~0x80000000;
+ if ( regVal < MAX_NMI_NUM )
+ {
+ if ( regVal == TIMER_16_0_IRQn )
+ {
+ /* Use TIMER16_0_IRQHandler as example for real application. */
+ LPC_CT16B0->IR = 0xFF; /* Clear timer16_0 interrupt */
+ }
+ else if ( regVal == TIMER_16_1_IRQn )
+ {
+ /* Use TIMER16_1_IRQHandler as example for real application. */
+ LPC_CT16B1->IR = 0xFF; /* Clear timer16_1 interrupt */
+ }
+ else if ( regVal == TIMER_32_0_IRQn )
+ {
+ /* Use TIMER32_0_IRQHandler as example for real application. */
+ LPC_CT32B0->IR = 0xFF; /* Clear timer32_0 interrupt */
+ }
+ else if ( regVal == TIMER_32_1_IRQn )
+ {
+ /* Use TIMER32_0_IRQHandler as example for real application. */
+ LPC_CT32B1->IR = 0xFF; /* Clear timer32_1 interrupt */
+ }
+ NMI_Counter[regVal]++;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: NMI_Init
+**
+** Descriptions: NMI initialization
+** parameters: NMI number
+**
+** Returned value: None
+**
+*****************************************************************************/
+void NMI_Init( uint32_t NMI_num )
+{
+ uint32_t i;
+
+ for ( i = 0; i < MAX_NMI_NUM; i++ )
+ {
+ NMI_Counter[i] = 0x0;
+ }
+ LPC_SYSCON->NMISRC = 0x80000000|NMI_num;
+ return;
+}
+
+#endif
diff -r 000000000000 -r 05d110ee258e nmi.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/nmi.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,32 @@ +/**************************************************************************** + * $Id:: nmi.h 6172 2011-01-13 18:22:51Z usb00423 $ + * Project: NXP LPC11Uxx NMI software example + * + * Description: + * This file contains definition and prototype for NMI interrupt. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __NMI_H +#define __NMI_H + +#define NMI_ENABLED 0 + +#define MAX_NMI_NUM 32 + +void NMI_Init( uint32_t NMI_num ); +void NMI_Handler(void); +#endif /* end __NMI_H */ +/***************************************************************************** +** End Of File +******************************************************************************/
diff -r 000000000000 -r 05d110ee258e timer16.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/timer16.c Sun May 27 23:59:30 2012 +0000
@@ -0,0 +1,581 @@
+/****************************************************************************
+ * $Id:: timer16.c 9190 2012-02-16 20:59:45Z nxp41306 $
+ * Project: NXP LPC11Uxx 16-bit timer example
+ *
+ * Description:
+ * This file contains 16-bit timer code example which include timer
+ * initialization, timer interrupt handler, and related APIs for
+ * timer setup.
+*
+****************************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+
+****************************************************************************/
+
+#include "LPC11Uxx.h"
+#include "timer16.h"
+#include "nmi.h"
+
+volatile uint32_t timer16_0_counter[2] = {0,0};
+volatile uint32_t timer16_1_counter[2] = {0,0};
+volatile uint32_t timer16_0_capture[2] = {0,0};
+volatile uint32_t timer16_1_capture[2] = {0,0};
+volatile uint32_t timer16_0_period = 0;
+volatile uint32_t timer16_1_period = 0;
+
+/*****************************************************************************
+** Function name: delayMs
+**
+** Descriptions: Start the timer delay in milo seconds
+** until elapsed
+**
+** parameters: timer number, Delay value in milo second
+**
+** Returned value: None
+**
+*****************************************************************************/
+void delayMs(uint8_t timer_num, uint32_t delayInMs)
+{
+ if (timer_num == 0)
+ {
+ /*
+ * setup timer #0 for delay
+ */
+ LPC_CT16B0->TCR = 0x02; /* reset timer */
+ LPC_CT16B0->PR = 0x00; /* set prescaler to zero */
+ LPC_CT16B0->MR0 = delayInMs * (SystemCoreClock / 1000);
+ LPC_CT16B0->IR = 0xff; /* reset all interrrupts */
+ LPC_CT16B0->MCR = 0x04; /* stop timer on match */
+ LPC_CT16B0->TCR = 0x01; /* start timer */
+ /* wait until delay time has elapsed */
+ while (LPC_CT16B0->TCR & 0x01);
+ }
+ else if (timer_num == 1)
+ {
+ /*
+ * setup timer #1 for delay
+ */
+ LPC_CT16B1->TCR = 0x02; /* reset timer */
+ LPC_CT16B1->PR = 0x00; /* set prescaler to zero */
+ LPC_CT16B1->MR0 = delayInMs * (SystemCoreClock / 1000);
+ LPC_CT16B1->IR = 0xff; /* reset all interrrupts */
+ LPC_CT16B1->MCR = 0x04; /* stop timer on match */
+ LPC_CT16B1->TCR = 0x01; /* start timer */
+ /* wait until delay time has elapsed */
+ while (LPC_CT16B1->TCR & 0x01);
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: TIMER_0_IRQHandler
+**
+** Descriptions: Timer/CounterX and CaptureX interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+******************************************************************************/
+extern "C" void TIMER16_0_IRQHandler(void)
+{
+ if ( LPC_CT16B0->IR & (0x1<<0) )
+ {
+ LPC_CT16B0->IR = 0x1<<0; /* clear interrupt flag */
+ timer16_0_counter[0]++;
+ }
+ if ( LPC_CT16B0->IR & (0x1<<1) )
+ {
+ LPC_CT16B0->IR = 0x1<<1; /* clear interrupt flag */
+ timer16_0_counter[1]++;
+ }
+ if ( LPC_CT16B0->IR & (0x1<<4) )
+ {
+ LPC_CT16B0->IR = 0x1<<4; /* clear interrupt flag */
+ timer16_0_capture[0]++;
+ }
+ if ( LPC_CT16B0->IR & (0x1<<5) )
+ {
+ LPC_CT16B0->IR = 0x1<<5; /* clear interrupt flag */
+ timer16_0_capture[1]++;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: TIMER_1_IRQHandler
+**
+** Descriptions: Timer/CounterX and CaptureX interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+******************************************************************************/
+extern "C" void TIMER16_1_IRQHandler(void)
+{
+ if ( LPC_CT16B1->IR & (0x1<<0) )
+ {
+ LPC_CT16B1->IR = 0x1<<0; /* clear interrupt flag */
+ timer16_1_counter[0]++;
+ }
+ if ( LPC_CT16B1->IR & (0x1<<1) )
+ {
+ LPC_CT16B1->IR = 0x1<<1; /* clear interrupt flag */
+ timer16_1_counter[1]++;
+ }
+ if ( LPC_CT16B1->IR & (0x1<<4) )
+ {
+ LPC_CT16B1->IR = 0x1<<4; /* clear interrupt flag */
+ timer16_1_capture[0]++;
+ }
+ if ( LPC_CT16B1->IR & (0x1<<5) )
+ {
+ LPC_CT16B1->IR = 0x1<<5; /* clear interrupt flag */
+ timer16_1_capture[1]++;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: enable_timer
+**
+** Descriptions: Enable timer
+**
+** parameters: timer number: 0 or 1
+** Returned value: None
+**
+******************************************************************************/
+void enable_timer16(uint8_t timer_num)
+{
+ if ( timer_num == 0 )
+ {
+ LPC_CT16B0->TCR = 1;
+ }
+ else
+ {
+ LPC_CT16B1->TCR = 1;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: disable_timer
+**
+** Descriptions: Disable timer
+**
+** parameters: timer number: 0 or 1
+** Returned value: None
+**
+******************************************************************************/
+void disable_timer16(uint8_t timer_num)
+{
+ if ( timer_num == 0 )
+ {
+ LPC_CT16B0->TCR = 0;
+ }
+ else
+ {
+ LPC_CT16B1->TCR = 0;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: reset_timer
+**
+** Descriptions: Reset timer
+**
+** parameters: timer number: 0 or 1
+** Returned value: None
+**
+******************************************************************************/
+void reset_timer16(uint8_t timer_num)
+{
+ uint32_t regVal;
+
+ if ( timer_num == 0 )
+ {
+ regVal = LPC_CT16B0->TCR;
+ regVal |= 0x02;
+ LPC_CT16B0->TCR = regVal;
+ }
+ else
+ {
+ regVal = LPC_CT16B1->TCR;
+ regVal |= 0x02;
+ LPC_CT16B1->TCR = regVal;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: Set_timer_capture
+**
+** Descriptions: set timer capture based on LOC number.
+**
+** parameters: timer number and location number
+** Returned value: None
+**
+******************************************************************************/
+void set_timer16_capture(uint8_t timer_num, uint8_t location )
+{
+ if ( timer_num == 0 )
+ {
+ /* Timer0_16 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO1_16 &= ~0x07;
+ LPC_IOCON->PIO1_16 |= 0x02; /* Timer0_16 CAP0 */
+// LPC_IOCON->PIO1_17 &= ~0x07;
+// LPC_IOCON->PIO1_17 |= 0x01; /* Timer0_16 CAP1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO0_2 &= ~0x07;
+ LPC_IOCON->PIO0_2 |= 0x02; /* Timer0_16 CAP0 */
+ }
+ else
+ {
+ while ( 1 ); /* Fatal location number error */
+ }
+ }
+ else
+ {
+ /* Timer1_16 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_20 &= ~0x07; /* Timer1_16 I/O config */
+ LPC_IOCON->PIO0_20 |= 0x01; /* Timer1_16 CAP0 */
+// LPC_IOCON->PIO1_18 &= ~0x07;
+// LPC_IOCON->PIO1_18 |= 0x01; /* Timer1_16 CAP1 */
+ }
+ else
+ {
+ while ( 1 ); /* Fatal location number error */
+ }
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: Set_timer_match
+**
+** Descriptions: set timer match based on LOC number.
+**
+** parameters: timer number, match enable, and location number
+** Returned value: None
+**
+******************************************************************************/
+void set_timer16_match(uint8_t timer_num, uint8_t match_enable, uint8_t location)
+{
+ if ( timer_num == 0 )
+ {
+ if ( match_enable & 0x01 )
+ {
+ /* Timer0_16 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_8 &= ~0x07;
+ LPC_IOCON->PIO0_8 |= 0x02; /* Timer0_16 MAT0 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_13 &= ~0x07;
+ LPC_IOCON->PIO1_13 |= 0x02; /* Timer0_16 MAT0 */
+ }
+ }
+ if ( match_enable & 0x02 )
+ {
+ /* Timer0_16 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_9 &= ~0x07;
+ LPC_IOCON->PIO0_9 |= 0x02; /* Timer0_16 MAT1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_14 &= ~0x07;
+ LPC_IOCON->PIO1_14 |= 0x02; /* Timer0_16 MAT1 */
+ }
+ }
+ if ( match_enable & 0x04 )
+ {
+ /* Timer0_16 I/O config */
+ if ( location == 0 )
+ {
+#ifdef __SWD_DISABLED
+ LPC_IOCON->SWCLK_PIO0_10 &= ~0x07;
+ LPC_IOCON->SWCLK_PIO0_10 |= 0x03; /* Timer0_16 MAT2 */
+#endif
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_15 &= ~0x07;
+ LPC_IOCON->PIO1_15 |= 0x02; /* Timer0_16 MAT0 */
+ }
+ }
+ }
+ else if ( timer_num == 1 )
+ {
+ if ( match_enable & 0x01 )
+ {
+ /* Timer1_16 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_21 &= ~0x07;
+ LPC_IOCON->PIO0_21 |= 0x01; /* Timer1_16 MAT0 */
+ }
+ }
+ if ( match_enable & 0x02 )
+ {
+ /* Timer1_16 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_22 &= ~0x07;
+ LPC_IOCON->PIO0_22 |= 0x02; /* Timer1_16 MAT1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_23 &= ~0x07;
+ LPC_IOCON->PIO1_23 |= 0x01; /* Timer1_16 MAT0 */
+ }
+ }
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: init_timer
+**
+** Descriptions: Initialize timer, set timer interval, reset timer,
+** install timer interrupt handler
+**
+** parameters: timer number and timer interval
+** Returned value: None
+**
+******************************************************************************/
+void init_timer16(uint8_t timer_num, uint32_t TimerInterval)
+{
+ if ( timer_num == 0 )
+ {
+ /* Some of the I/O pins need to be clearfully planned if
+ you use below module because JTAG and TIMER CAP/MAT pins are muxed. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<7);
+
+ LPC_CT16B0->MR0 = TimerInterval;
+ LPC_CT16B0->MR1 = TimerInterval;
+#if TIMER_MATCH
+ timer16_0_counter[0] = 0;
+ timer16_0_counter[1] = 0;
+ set_timer16_match(timer_num, 0x07, 0);
+ LPC_CT16B0->EMR &= ~(0xFF<<4);
+ LPC_CT16B0->EMR |= ((0x3<<4)|(0x3<<6)|(0x3<<8));
+#else
+ timer16_0_capture[0] = 0;
+ timer16_0_capture[1] = 0;
+ set_timer16_capture(timer_num, 0);
+ /* Capture 0 and 1 on rising edge, interrupt enable. */
+ LPC_CT16B0->CCR = (0x5<<0)|(0x5<<3);
+#endif
+ LPC_CT16B0->MCR = (0x3<<0)|(0x3<<3); /* Interrupt and Reset on MR0 and MR1 */
+
+ /* Enable the TIMER0 Interrupt */
+#if NMI_ENABLED
+ NVIC_DisableIRQ(TIMER_16_0_IRQn);
+ NMI_Init( TIMER_16_0_IRQn );
+#else
+ NVIC_EnableIRQ(TIMER_16_0_IRQn);
+#endif
+ }
+ else if ( timer_num == 1 )
+ {
+ /* Some of the I/O pins need to be clearfully planned if
+ you use below module because JTAG and TIMER CAP/MAT pins are muxed. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<8);
+ LPC_CT16B1->MR0 = TimerInterval;
+ LPC_CT16B1->MR1 = TimerInterval;
+#if TIMER_MATCH
+ timer16_1_counter[0] = 0;
+ timer16_1_counter[1] = 0;
+ set_timer16_match(timer_num, 0x07, 0);
+ LPC_CT16B1->EMR &= ~(0xFF<<4);
+ LPC_CT16B1->EMR |= ((0x3<<4)|(0x3<<6)|(0x3<<8));
+#else
+ timer16_1_capture[0] = 0;
+ timer16_1_capture[1] = 0;
+ set_timer16_capture(timer_num, 0);
+ /* Capture 0 and 1 on rising edge, interrupt enable. */
+ LPC_CT16B1->CCR = (0x5<<0)|(0x5<<3);
+#endif
+ LPC_CT16B1->MCR = (0x3<<0)|(0x3<<3); /* Interrupt and Reset on MR0 and MR1 */
+
+ /* Enable the TIMER1 Interrupt */
+#if NMI_ENABLED
+ NVIC_DisableIRQ(TIMER_16_1_IRQn);
+ NMI_Init( TIMER_16_1_IRQn );
+#else
+ NVIC_EnableIRQ(TIMER_16_1_IRQn);
+#endif
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: init_timer16PWM
+**
+** Descriptions: Initialize timer as PWM
+**
+** parameters: timer number, period and match enable:
+** match_enable[0] = PWM for MAT0
+** match_enable[1] = PWM for MAT1
+** match_enable[2] = PWM for MAT2
+**
+** Returned value: None
+**
+******************************************************************************/
+void init_timer16PWM(uint8_t timer_num, uint32_t period, uint8_t match_enable, uint8_t cap_enabled)
+{
+ disable_timer16(timer_num);
+
+ if (timer_num == 1)
+ {
+ /* Some of the I/O pins need to be clearfully planned if
+ you use below module because JTAG and TIMER CAP/MAT pins are muxed. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<8);
+
+ /* Setup the external match register */
+ LPC_CT16B1->EMR = (1<<EMC3)|(1<<EMC2)|(1<<EMC1)|(2<<EMC0)|(1<<3)|(match_enable);
+
+ /* Setup the outputs */
+ /* If match0 is enabled, set the output */
+ set_timer16_match(timer_num, match_enable, 0 );
+
+ /* Enable the selected PWMs and enable Match3 */
+ LPC_CT16B1->PWMC = (1<<3)|(match_enable);
+
+ /* Setup the match registers */
+ /* set the period value to a global variable */
+ timer16_1_period = period;
+ LPC_CT16B1->MR3 = timer16_1_period;
+ LPC_CT16B1->MR0 = timer16_1_period/2;
+ LPC_CT16B1->MR1 = timer16_1_period/2;
+ LPC_CT16B1->MR2 = timer16_1_period/2;
+
+ /* Set match control register */
+ LPC_CT16B1->MCR = 1<<10;// | 1<<9; /* Reset on MR3 */
+
+ if (cap_enabled)
+ {
+ /* Use location 0 for test. */
+ set_timer16_capture( timer_num, 0 );
+ LPC_CT16B1->IR = 0xF; /* clear interrupt flag */
+
+ /* Set the capture control register */
+ LPC_CT16B1->CCR = 7;
+
+ }
+ /* Enable the TIMER1 Interrupt */
+ NVIC_EnableIRQ(TIMER_16_1_IRQn);
+ }
+ else
+ {
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<7);
+
+ /* Setup the external match register */
+ LPC_CT16B0->EMR = (1<<EMC3)|(1<<EMC2)|(1<<EMC1)|(1<<EMC0)|(1<<3)|(match_enable);
+
+ /* Setup the outputs */
+ /* If match0 is enabled, set the output */
+ set_timer16_match(timer_num, match_enable, 0 );
+
+ /* Enable the selected PWMs and enable Match3 */
+ LPC_CT16B0->PWMC = (1<<3)|(match_enable);
+
+ /* Setup the match registers */
+ /* set the period value to a global variable */
+ timer16_0_period = period;
+ LPC_CT16B0->MR3 = timer16_0_period;
+ LPC_CT16B0->MR0 = timer16_0_period/2;
+ LPC_CT16B0->MR1 = timer16_0_period/2;
+ LPC_CT16B0->MR2 = timer16_0_period/2;
+
+ /* Set the match control register */
+ LPC_CT16B0->MCR = 1<<10; /* Reset on MR3 */
+
+ /* Enable the TIMER1 Interrupt */
+ NVIC_EnableIRQ(TIMER_16_0_IRQn);
+ }
+}
+
+/******************************************************************************
+** Function name: pwm16_setMatch
+**
+** Descriptions: Set the pwm16 match values
+**
+** parameters: timer number, match numner and the value
+**
+** Returned value: None
+**
+******************************************************************************/
+void setMatch_timer16PWM (uint8_t timer_num, uint8_t match_nr, uint32_t value)
+{
+ if (timer_num)
+ {
+ switch (match_nr)
+ {
+ case 0:
+ LPC_CT16B1->MR0 = value;
+ break;
+ case 1:
+ LPC_CT16B1->MR1 = value;
+ break;
+ case 2:
+ LPC_CT16B1->MR2 = value;
+ break;
+ case 3:
+ LPC_CT16B1->MR3 = value;
+ break;
+ default:
+ break;
+ }
+ }
+ else
+ {
+ switch (match_nr)
+ {
+ case 0:
+ LPC_CT16B0->MR0 = value;
+ break;
+ case 1:
+ LPC_CT16B0->MR1 = value;
+ break;
+ case 2:
+ LPC_CT16B0->MR2 = value;
+ break;
+ case 3:
+ LPC_CT16B0->MR3 = value;
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
diff -r 000000000000 -r 05d110ee258e timer16.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/timer16.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,59 @@ +/**************************************************************************** + * $Id:: timer16.h 6956 2011-03-23 23:03:25Z usb00423 $ + * Project: NXP LPC11xx software example + * + * Description: + * This file contains definition and prototype for 16-bit timer + * configuration. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __TIMER16_H +#define __TIMER16_H + +/* The test is either MAT_OUT or CAP_IN. Default is MAT_OUT. */ +#define TIMER_MATCH 0 + + +#define EMC0 4 +#define EMC1 6 +#define EMC2 8 +#define EMC3 10 + +#define MATCH0 (1<<0) +#define MATCH1 (1<<1) +#define MATCH2 (1<<2) +#define MATCH3 (1<<3) + +///* For 16-bit timer, make sure that TIME_INTERVAL should be no +//greater than 0xFFFF. */ +#ifndef TIME_INTERVAL +#define TIME_INTERVAL (SystemCoreClock/1000 - 1) +#endif + +void delayMs(uint8_t timer_num, uint32_t delayInMs); +extern "C" void TIMER16_0_IRQHandler(void); +extern "C" void TIMER16_1_IRQHandler(void); +void enable_timer16(uint8_t timer_num); +void disable_timer16(uint8_t timer_num); +void reset_timer16(uint8_t timer_num); +void set_timer16_capture(uint8_t timer_num, uint8_t location ); +void set_timer16_match(uint8_t timer_num, uint8_t match_enable, uint8_t location); +void init_timer16(uint8_t timer_num, uint32_t timerInterval); +void init_timer16PWM(uint8_t timer_num, uint32_t period, uint8_t match_enable, uint8_t cap_enabled); +void setMatch_timer16PWM (uint8_t timer_num, uint8_t match_nr, uint32_t value); + +#endif /* end __TIMER16_H */ +/***************************************************************************** +** End Of File +******************************************************************************/
diff -r 000000000000 -r 05d110ee258e timer32.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/timer32.c Sun May 27 23:59:30 2012 +0000
@@ -0,0 +1,649 @@
+/****************************************************************************
+ * $Id:: timer32.c 9190 2012-02-16 20:59:45Z nxp41306 $
+ * Project: NXP LPC11Uxx 32-bit timer example
+ *
+ * Description:
+ * This file contains 32-bit timer code example which include timer
+ * initialization, timer interrupt handler, and related APIs for
+ * timer setup.
+*
+****************************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+
+****************************************************************************/
+
+#include "LPC11Uxx.h"
+#include "timer32.h"
+#include "nmi.h"
+
+volatile uint32_t timer32_0_counter[4] = {0,0,0,0};
+volatile uint32_t timer32_1_counter[4] = {0,0,0,0};
+volatile uint32_t timer32_0_capture[4] = {0,0,0,0};
+volatile uint32_t timer32_1_capture[4] = {0,0,0,0};
+volatile uint32_t timer32_0_period = 0;
+volatile uint32_t timer32_1_period = 0;
+
+/*****************************************************************************
+** Function name: delay32Ms
+**
+** Descriptions: Start the timer delay in milo seconds
+** until elapsed
+**
+** parameters: timer number, Delay value in milo second
+**
+** Returned value: None
+**
+*****************************************************************************/
+void delay32Ms(uint8_t timer_num, uint32_t delayInMs)
+{
+ if (timer_num == 0)
+ {
+ /* setup timer #0 for delay */
+ LPC_CT32B0->TCR = 0x02; /* reset timer */
+ LPC_CT32B0->PR = 0x00; /* set prescaler to zero */
+ LPC_CT32B0->MR0 = delayInMs * (SystemCoreClock / 1000);
+ LPC_CT32B0->IR = 0xff; /* reset all interrrupts */
+ LPC_CT32B0->MCR = 0x04; /* stop timer on match */
+ LPC_CT32B0->TCR = 0x01; /* start timer */
+
+ /* wait until delay time has elapsed */
+ while (LPC_CT32B0->TCR & 0x01);
+ }
+ else if (timer_num == 1)
+ {
+ /* setup timer #1 for delay */
+ LPC_CT32B1->TCR = 0x02; /* reset timer */
+ LPC_CT32B1->PR = 0x00; /* set prescaler to zero */
+ LPC_CT32B1->MR0 = delayInMs * (SystemCoreClock / 1000);
+ LPC_CT32B1->IR = 0xff; /* reset all interrrupts */
+ LPC_CT32B1->MCR = 0x04; /* stop timer on match */
+ LPC_CT32B1->TCR = 0x01; /* start timer */
+
+ /* wait until delay time has elapsed */
+ while (LPC_CT32B1->TCR & 0x01);
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: TIMER32_0_IRQHandler
+**
+** Descriptions: Timer/CounterX and captureX interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+******************************************************************************/
+void TIMER32_0_IRQHandler(void)
+{
+ if ( LPC_CT32B0->IR & (0x01<<0) )
+ {
+ LPC_CT32B0->IR = 0x1<<0; /* clear interrupt flag */
+ timer32_0_counter[0]++;
+ }
+ if ( LPC_CT32B0->IR & (0x01<<1) )
+ {
+ LPC_CT32B0->IR = 0x1<<1; /* clear interrupt flag */
+ timer32_0_counter[1]++;
+ }
+ if ( LPC_CT32B0->IR & (0x01<<2) )
+ {
+ LPC_CT32B0->IR = 0x1<<2; /* clear interrupt flag */
+ timer32_0_counter[2]++;
+ }
+ if ( LPC_CT32B0->IR & (0x01<<3) )
+ {
+ LPC_CT32B0->IR = 0x1<<3; /* clear interrupt flag */
+ timer32_0_counter[3]++;
+ }
+ if ( LPC_CT32B0->IR & (0x1<<4) )
+ {
+ LPC_CT32B0->IR = 0x1<<4; /* clear interrupt flag */
+ timer32_0_capture[0]++;
+ }
+ if ( LPC_CT32B0->IR & (0x1<<5) )
+ {
+ LPC_CT32B0->IR = 0x1<<5; /* clear interrupt flag */
+ timer32_0_capture[1]++;
+ }
+ if ( LPC_CT32B0->IR & (0x1<<6) )
+ {
+ LPC_CT32B0->IR = 0x1<<6; /* clear interrupt flag */
+ timer32_0_capture[2]++;
+ }
+ if ( LPC_CT32B0->IR & (0x1<<7) )
+ {
+ LPC_CT32B0->IR = 0x1<<7; /* clear interrupt flag */
+ timer32_0_capture[3]++;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: TIMER32_1_IRQHandler
+**
+** Descriptions: Timer/CounterX and captureX interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+******************************************************************************/
+void TIMER32_1_IRQHandler(void)
+{
+ if ( LPC_CT32B1->IR & (0x01<<0) )
+ {
+ LPC_CT32B1->IR = 0x1<<0; /* clear interrupt flag */
+ timer32_1_counter[0]++;
+ }
+ if ( LPC_CT32B1->IR & (0x01<<1) )
+ {
+ LPC_CT32B1->IR = 0x1<<1; /* clear interrupt flag */
+ timer32_1_counter[1]++;
+ }
+ if ( LPC_CT32B1->IR & (0x01<<2) )
+ {
+ LPC_CT32B1->IR = 0x1<<2; /* clear interrupt flag */
+ timer32_1_counter[2]++;
+ }
+ if ( LPC_CT32B1->IR & (0x01<<3) )
+ {
+ LPC_CT32B1->IR = 0x1<<3; /* clear interrupt flag */
+ timer32_1_counter[3]++;
+ }
+ if ( LPC_CT32B1->IR & (0x1<<4) )
+ {
+ LPC_CT32B1->IR = 0x1<<4; /* clear interrupt flag */
+ timer32_1_capture[0]++;
+ }
+ if ( LPC_CT32B1->IR & (0x1<<5) )
+ {
+ LPC_CT32B1->IR = 0x1<<5; /* clear interrupt flag */
+ timer32_1_capture[1]++;
+ }
+ if ( LPC_CT32B1->IR & (0x1<<6) )
+ {
+ LPC_CT32B1->IR = 0x1<<6; /* clear interrupt flag */
+ timer32_1_capture[2]++;
+ }
+ if ( LPC_CT32B1->IR & (0x1<<7) )
+ {
+ LPC_CT32B1->IR = 0x1<<7; /* clear interrupt flag */
+ timer32_1_capture[3]++;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: enable_timer
+**
+** Descriptions: Enable timer
+**
+** parameters: timer number: 0 or 1
+** Returned value: None
+**
+******************************************************************************/
+void enable_timer32(uint8_t timer_num)
+{
+ if ( timer_num == 0 )
+ {
+ LPC_CT32B0->TCR = 1;
+ }
+ else
+ {
+ LPC_CT32B1->TCR = 1;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: disable_timer
+**
+** Descriptions: Disable timer
+**
+** parameters: timer number: 0 or 1
+** Returned value: None
+**
+******************************************************************************/
+void disable_timer32(uint8_t timer_num)
+{
+ if ( timer_num == 0 )
+ {
+ LPC_CT32B0->TCR = 0;
+ }
+ else
+ {
+ LPC_CT32B1->TCR = 0;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: reset_timer
+**
+** Descriptions: Reset timer
+**
+** parameters: timer number: 0 or 1
+** Returned value: None
+**
+******************************************************************************/
+void reset_timer32(uint8_t timer_num)
+{
+ uint32_t regVal;
+
+ if ( timer_num == 0 )
+ {
+ regVal = LPC_CT32B0->TCR;
+ regVal |= 0x02;
+ LPC_CT32B0->TCR = regVal;
+ }
+ else
+ {
+ regVal = LPC_CT32B1->TCR;
+ regVal |= 0x02;
+ LPC_CT32B1->TCR = regVal;
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: set_timer_capture
+**
+** Descriptions: Set timer capture based on location
+**
+** parameters: timer number: 0~1, location 0~2
+** Returned value: None
+**
+******************************************************************************/
+void set_timer32_capture(uint8_t timer_num, uint8_t location )
+{
+ if ( timer_num == 0 )
+ {
+ /* Timer0_32 I/O config */
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO1_28 &= ~0x07;
+ LPC_IOCON->PIO1_28 |= 0x01; /* Timer0_32 CAP0 */
+ LPC_IOCON->PIO1_29 &= ~0x07;
+ LPC_IOCON->PIO1_29 |= 0x02; /* Timer0_32 CAP1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO0_17 &= ~0x07;
+ LPC_IOCON->PIO0_17 |= 0x02; /* Timer0_32 CAP0 */
+ }
+ else
+ {
+ while ( 1 ); /* Fatal location number error */
+ }
+ }
+ else
+ {
+ /* Timer1_32 I/O config */
+ if ( location == 0 )
+ {
+// LPC_IOCON->PIO1_4 &= ~0x07; /* Timer1_32 I/O config */
+// LPC_IOCON->PIO1_4 |= 0x01; /* Timer1_32 CAP0 */
+// LPC_IOCON->PIO1_5 &= ~0x07;
+// LPC_IOCON->PIO1_5 |= 0x01; /* Timer1_32 CAP1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->TMS_PIO0_12 &= ~0x07;
+ LPC_IOCON->TMS_PIO0_12 |= 0x03; /* Timer1_32 CAP0 */
+ }
+ else
+ {
+ while ( 1 ); /* Fatal location number error */
+ }
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: set_timer_match
+**
+** Descriptions: Set timer match based on location
+**
+** parameters: timer number: 0~1, location 0~2
+** Returned value: None
+**
+******************************************************************************/
+void set_timer32_match(uint8_t timer_num, uint8_t match_enable, uint8_t location)
+{
+ if ( timer_num == 0 )
+ {
+ if ( match_enable & 0x01 )
+ {
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_18 &= ~0x07;
+ LPC_IOCON->PIO0_18 |= 0x02; /* Timer0_32 MAT0 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_24 &= ~0x07;
+ LPC_IOCON->PIO1_24 |= 0x01; /* Timer0_32 MAT0 */
+ }
+ }
+ if ( match_enable & 0x02 )
+ {
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_19 &= ~0x07;
+ LPC_IOCON->PIO0_19 |= 0x02; /* Timer0_32 MAT1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_25 &= ~0x07;
+ LPC_IOCON->PIO1_25 |= 0x01; /* Timer0_32 MAT1 */
+ }
+ }
+ if ( match_enable & 0x04 )
+ {
+ if ( location == 0 )
+ {
+ LPC_IOCON->PIO0_1 &= ~0x07;
+ LPC_IOCON->PIO0_1 |= 0x02; /* Timer0_32 MAT2 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_26 &= ~0x07;
+ LPC_IOCON->PIO1_26 |= 0x01; /* Timer0_32 MAT2 */
+ }
+ }
+ if ( match_enable & 0x08 )
+ {
+ if ( location == 0 )
+ {
+ LPC_IOCON->TDI_PIO0_11 &= ~0x07;
+ LPC_IOCON->TDI_PIO0_11 |= 0x03; /* Timer0_32 MAT3 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO1_27 &= ~0x07;
+ LPC_IOCON->PIO1_27 |= 0x01; /* Timer0_32 MAT3 */
+ }
+ }
+ }
+ else if ( timer_num == 1 )
+ {
+ if ( match_enable & 0x01 )
+ {
+ if ( location == 0 )
+ {
+// LPC_IOCON->PIO1_0 &= ~0x07;
+// LPC_IOCON->PIO1_0 |= 0x01; /* Timer1_32 MAT0 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->TDO_PIO0_13 &= ~0x07;
+ LPC_IOCON->TDO_PIO0_13 |= 0x03; /* Timer1_32 MAT0 */
+ }
+ }
+ if ( match_enable & 0x02 )
+ {
+ if ( location == 0 )
+ {
+// LPC_IOCON->PIO1_1 &= ~0x07;
+// LPC_IOCON->PIO1_1 |= 0x01; /* Timer1_32 MAT1 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->TRST_PIO0_14 &= ~0x07;
+ LPC_IOCON->TRST_PIO0_14 |= 0x03; /* Timer1_32 MAT1 */
+ }
+ }
+ if ( match_enable & 0x04 )
+ {
+ if ( location == 0 )
+ {
+// LPC_IOCON->PIO1_2 &= ~0x07;
+// LPC_IOCON->PIO1_2 |= 0x01; /* Timer1_32 MAT2 */
+ }
+ else if ( location == 1 )
+ {
+#if __SWD_DISABLED
+ LPC_IOCON->SWDIO_PIO0_15 &= ~0x07;
+ LPC_IOCON->SWDIO_PIO0_15 |= 0x03; /* Timer1_32 MAT2 */
+#endif
+ }
+ }
+ if ( match_enable & 0x08 )
+ {
+ if ( location == 0 )
+ {
+// LPC_IOCON->PIO1_3 &= ~0x07;
+// LPC_IOCON->PIO1_3 |= 0x01; /* Timer1_32 MAT3 */
+ }
+ else if ( location == 1 )
+ {
+ LPC_IOCON->PIO0_16 &= ~0x07;
+ LPC_IOCON->PIO0_16 |= 0x02; /* Timer1_32 MAT3 */
+ }
+ }
+ }
+ return;
+}
+
+/******************************************************************************
+** Function name: init_timer
+**
+** Descriptions: Initialize timer, set timer interval, reset timer,
+** install timer interrupt handler
+**
+** parameters: timer number and timer interval
+** Returned value: None
+**
+******************************************************************************/
+void init_timer32(uint8_t timer_num, uint32_t TimerInterval)
+{
+ uint32_t i;
+
+ if ( timer_num == 0 )
+ {
+ /* Some of the I/O pins need to be clearfully planned if
+ you use below module because JTAG and TIMER CAP/MAT pins are muxed. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<9);
+
+ LPC_CT32B0->MR0 = TimerInterval;
+#if TIMER_MATCH
+ for ( i = 0; i < 4; i++ )
+ {
+ timer32_0_counter[i] = 0;
+ }
+ set_timer32_match(timer_num, 0x0F, 0);
+ LPC_CT32B0->EMR &= ~(0xFF<<4);
+ LPC_CT32B0->EMR |= ((0x3<<4)|(0x3<<6)|(0x3<<8)|(0x3<<10)); /* MR0/1/2/3 Toggle */
+#else
+ for ( i = 0; i < 4; i++ )
+ {
+ timer32_0_capture[i] = 0;
+ }
+ set_timer32_capture(timer_num, 0 );
+ /* Capture 0 on rising edge, interrupt enable. */
+ LPC_CT32B0->CCR = (0x5<<0)|(0x5<<3);
+#endif
+ LPC_CT32B0->MCR = 3; /* Interrupt and Reset on MR0 */
+
+ /* Enable the TIMER0 Interrupt */
+#if NMI_ENABLED
+ NVIC_DisableIRQ( TIMER_32_0_IRQn );
+ NMI_Init( TIMER_32_0_IRQn );
+#else
+ NVIC_EnableIRQ(TIMER_32_0_IRQn);
+#endif
+ }
+ else if ( timer_num == 1 )
+ {
+ /* Some of the I/O pins need to be clearfully planned if
+ you use below module because JTAG and TIMER CAP/MAT pins are muxed. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<10);
+
+ LPC_CT32B1->MR0 = TimerInterval;
+#if TIMER_MATCH
+ for ( i = 0; i < 4; i++ )
+ {
+ timer32_1_counter[i] = 0;
+ }
+ set_timer32_match(timer_num, 0x0F, 0);
+ LPC_CT32B1->EMR &= ~(0xFF<<4);
+ LPC_CT32B1->EMR |= ((0x3<<4)|(0x3<<6)|(0x3<<8)|(0x3<<10)); /* MR0/1/2 Toggle */
+#else
+ for ( i = 0; i < 4; i++ )
+ {
+ timer32_1_capture[i] = 0;
+ }
+ set_timer32_capture(timer_num, 0 );
+ /* Capture 0 on rising edge, interrupt enable. */
+ LPC_CT32B1->CCR = (0x5<<0)|(0x5<<3);
+#endif
+ LPC_CT32B1->MCR = 3; /* Interrupt and Reset on MR0 */
+
+ /* Enable the TIMER1 Interrupt */
+#if NMI_ENABLED
+ NVIC_DisableIRQ( TIMER_32_1_IRQn );
+ NMI_Init( TIMER_32_1_IRQn );
+#else
+ NVIC_EnableIRQ(TIMER_32_1_IRQn);
+#endif
+ }
+ return;
+}
+/******************************************************************************
+** Function name: init_timer32PWM
+**
+** Descriptions: Initialize timer as PWM
+**
+** parameters: timer number, period and match enable:
+** match_enable[0] = PWM for MAT0
+** match_enable[1] = PWM for MAT1
+** match_enable[2] = PWM for MAT2
+** Returned value: None
+**
+******************************************************************************/
+void init_timer32PWM(uint8_t timer_num, uint32_t period, uint8_t match_enable)
+{
+ disable_timer32(timer_num);
+ if (timer_num == 1)
+ {
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<10);
+
+ /* Setup the external match register */
+ LPC_CT32B1->EMR = (1<<EMC3)|(1<<EMC2)|(2<<EMC1)|(1<<EMC0)|MATCH3|(match_enable);
+
+ /* Setup the outputs */
+ /* If match0 is enabled, set the output, use location 0 for test. */
+ set_timer32_match( timer_num, match_enable, 0 );
+
+ /* Enable the selected PWMs and enable Match3 */
+ LPC_CT32B1->PWMC = MATCH3|(match_enable);
+
+ /* Setup the match registers */
+ /* set the period value to a global variable */
+ timer32_1_period = period;
+ LPC_CT32B1->MR3 = timer32_1_period;
+ LPC_CT32B1->MR0 = timer32_1_period/2;
+ LPC_CT32B1->MR1 = timer32_1_period/2;
+ LPC_CT32B1->MR2 = timer32_1_period/2;
+ LPC_CT32B1->MCR = 1<<10; /* Reset on MR3 */
+ }
+ else
+ {
+ /* Some of the I/O pins need to be clearfully planned if
+ you use below module because JTAG and TIMER CAP/MAT pins are muxed. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<9);
+
+ /* Setup the external match register */
+ LPC_CT32B0->EMR = (1<<EMC3)|(2<<EMC2)|(1<<EMC1)|(1<<EMC0)|MATCH3|(match_enable);
+
+ /* Setup the outputs */
+ /* If match0 is enabled, set the output, use location 0 for test. */
+ set_timer32_match( timer_num, match_enable, 0 );
+
+ /* Enable the selected PWMs and enable Match3 */
+ LPC_CT32B0->PWMC = MATCH3|(match_enable);
+
+ /* Setup the match registers */
+ /* set the period value to a global variable */
+ timer32_0_period = period;
+ LPC_CT32B0->MR3 = timer32_0_period;
+ LPC_CT32B0->MR0 = timer32_0_period/2;
+ LPC_CT32B0->MR1 = timer32_0_period/2;
+ LPC_CT32B0->MR2 = timer32_0_period/2;
+ LPC_CT32B0->MCR = 1<<10; /* Reset on MR3 */
+ }
+}
+
+/******************************************************************************
+** Function name: pwm32_setMatch
+**
+** Descriptions: Set the pwm32 match values
+**
+** parameters: timer number, match numner and the value
+**
+** Returned value: None
+**
+******************************************************************************/
+void setMatch_timer32PWM (uint8_t timer_num, uint8_t match_nr, uint32_t value)
+{
+ if (timer_num)
+ {
+ switch (match_nr)
+ {
+ case 0:
+ LPC_CT32B1->MR0 = value;
+ break;
+ case 1:
+ LPC_CT32B1->MR1 = value;
+ break;
+ case 2:
+ LPC_CT32B1->MR2 = value;
+ break;
+ case 3:
+ LPC_CT32B1->MR3 = value;
+ break;
+ default:
+ break;
+ }
+ }
+ else
+ {
+ switch (match_nr)
+ {
+ case 0:
+ LPC_CT32B0->MR0 = value;
+ break;
+ case 1:
+ LPC_CT32B0->MR1 = value;
+ break;
+ case 2:
+ LPC_CT32B0->MR2 = value;
+ break;
+ case 3:
+ LPC_CT32B0->MR3 = value;
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
diff -r 000000000000 -r 05d110ee258e timer32.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/timer32.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,58 @@ +/**************************************************************************** + * $Id:: timer32.h 7146 2011-04-19 19:48:01Z nxp28548 $ + * Project: NXP LPC11xx software example + * + * Description: + * This file contains definition and prototype for 32-bit timer + * configuration. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __TIMER32_H +#define __TIMER32_H + +/* The test is either MAT_OUT or CAP_IN. Default is CAP_IN. */ +#ifndef TIMER_MATCH +#define TIMER_MATCH 0 +#endif//TIMER_MATCH + +#define EMC0 4 +#define EMC1 6 +#define EMC2 8 +#define EMC3 10 + +#define MATCH0 (1<<0) +#define MATCH1 (1<<1) +#define MATCH2 (1<<2) +#define MATCH3 (1<<3) + +#ifndef TIME_INTERVAL +#define TIME_INTERVAL (SystemCoreClock/100 - 1) +#endif + +void delay32Ms(uint8_t timer_num, uint32_t delayInMs); +void TIMER32_0_IRQHandler(void); +void TIMER32_1_IRQHandler(void); +void enable_timer32(uint8_t timer_num); +void disable_timer32(uint8_t timer_num); +void reset_timer32(uint8_t timer_num); +void set_timer32_capture(uint8_t timer_num, uint8_t location ); +void set_timer32_match(uint8_t timer_num, uint8_t match_enable, uint8_t location); +void init_timer32(uint8_t timer_num, uint32_t timerInterval); +void init_timer32PWM(uint8_t timer_num, uint32_t period, uint8_t match_enable); +void setMatch_timer32PWM (uint8_t timer_num, uint8_t match_nr, uint32_t value); + +#endif /* end __TIMER32_H */ +/***************************************************************************** +** End Of File +******************************************************************************/
diff -r 000000000000 -r 05d110ee258e type.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/type.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,47 @@ +/**************************************************************************** + * $Id:: type.h 6172 2011-01-13 18:22:51Z usb00423 $ + * Project: NXP LPC11xx software example + * + * Description: + * This file contains different type definition. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __TYPE_H__ +#define __TYPE_H__ + +/* exact-width signed integer types */ +typedef signed char int8_t; +typedef signed short int int16_t; +typedef signed int int32_t; +typedef signed __int64 int64_t; + + /* exact-width unsigned integer types */ +typedef unsigned char uint8_t; +typedef unsigned short int uint16_t; +typedef unsigned int uint32_t; +typedef unsigned __int64 uint64_t; + +#ifndef NULL +#define NULL ((void *)0) +#endif + +#ifndef FALSE +#define FALSE (0) +#endif + +#ifndef TRUE +#define TRUE (1) +#endif + +#endif /* __TYPE_H__ */
diff -r 000000000000 -r 05d110ee258e uart.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/uart.c Sun May 27 23:59:30 2012 +0000
@@ -0,0 +1,440 @@
+/****************************************************************************
+ * $Id:: uart.c 9188 2012-02-16 20:53:43Z nxp41306 $
+ * Project: NXP LPC11Uxx UART example
+ *
+ * Description:
+ * This file contains UART code example which include UART
+ * initialization, UART interrupt handler, and related APIs for
+ * UART access.
+ *
+****************************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+
+****************************************************************************/
+
+#include "LPC11Uxx.h"
+#include "type.h"
+#include "uart.h"
+
+volatile uint32_t UARTStatus;
+volatile uint8_t UARTTxEmpty = 1;
+volatile uint8_t UARTBuffer[BUFSIZE];
+volatile uint32_t UARTCount = 0;
+
+#if AUTOBAUD_ENABLE
+volatile uint32_t UARTAutoBaud = 0, AutoBaudTimeout = 0;
+#endif
+
+/*****************************************************************************
+** Function name: UART_IRQHandler
+**
+** Descriptions: UART interrupt handler
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void UART_IRQHandler(void)
+{
+ uint8_t IIRValue, LSRValue;
+ uint8_t Dummy = Dummy;
+
+ IIRValue = LPC_USART->IIR;
+
+ IIRValue >>= 1; /* skip pending bit in IIR */
+ IIRValue &= 0x07; /* check bit 1~3, interrupt identification */
+ if (IIRValue == IIR_RLS) /* Receive Line Status */
+ {
+ LSRValue = LPC_USART->LSR;
+ /* Receive Line Status */
+ if (LSRValue & (LSR_OE | LSR_PE | LSR_FE | LSR_RXFE | LSR_BI))
+ {
+ /* There are errors or break interrupt */
+ /* Read LSR will clear the interrupt */
+ UARTStatus = LSRValue;
+ Dummy = LPC_USART->RBR; /* Dummy read on RX to clear
+ interrupt, then bail out */
+ return;
+ }
+ if (LSRValue & LSR_RDR) /* Receive Data Ready */
+ {
+ /* If no error on RLS, normal ready, save into the data buffer. */
+ /* Note: read RBR will clear the interrupt */
+ UARTBuffer[UARTCount++] = LPC_USART->RBR;
+ if (UARTCount == BUFSIZE)
+ {
+ UARTCount = 0; /* buffer overflow */
+ }
+ }
+ }
+ else if (IIRValue == IIR_RDA) /* Receive Data Available */
+ {
+ /* Receive Data Available */
+ UARTBuffer[UARTCount++] = LPC_USART->RBR;
+ if (UARTCount == BUFSIZE)
+ {
+ UARTCount = 0; /* buffer overflow */
+ }
+ }
+ else if (IIRValue == IIR_CTI) /* Character timeout indicator */
+ {
+ /* Character Time-out indicator */
+ UARTStatus |= 0x100; /* Bit 9 as the CTI error */
+ }
+ else if (IIRValue == IIR_THRE) /* THRE, transmit holding register empty */
+ {
+ /* THRE interrupt */
+ LSRValue = LPC_USART->LSR; /* Check status in the LSR to see if
+ valid data in U0THR or not */
+ if (LSRValue & LSR_THRE)
+ {
+ UARTTxEmpty = 1;
+ }
+ else
+ {
+ UARTTxEmpty = 0;
+ }
+ }
+#if AUTOBAUD_ENABLE
+ if (LPC_USART->IIR & IIR_ABEO) /* End of Auto baud */
+ {
+ LPC_USART->IER &= ~IIR_ABEO;
+ /* clear bit ABEOInt in the IIR by set ABEOIntClr in the ACR register */
+ LPC_USART->ACR |= IIR_ABEO;
+ UARTAutoBaud = 1;
+ }
+ else if (LPC_USART->IIR & IIR_ABTO)/* Auto baud time out */
+ {
+ LPC_USART->IER &= ~IIR_ABTO;
+ AutoBaudTimeout = 1;
+ /* clear bit ABTOInt in the IIR by set ABTOIntClr in the ACR register */
+ LPC_USART->ACR |= IIR_ABTO;
+ }
+#endif
+ return;
+}
+
+#if MODEM_TEST
+/*****************************************************************************
+** Function name: ModemInit
+**
+** Descriptions: Initialize UART0 port as modem, setup pin select.
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void ModemInit( void )
+{
+
+ LPC_IOCON->PIO0_7 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO0_7 |= 0x01; /* UART CTS */
+ LPC_IOCON->PIO0_17 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO0_17 |= 0x01; /* UART RTS */
+#if 1
+ LPC_IOCON->PIO1_13 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_13 |= 0x01; /* UART DTR */
+ LPC_IOCON->PIO1_14 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_14 |= 0x01; /* UART DSR */
+ LPC_IOCON->PIO1_15 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_15 |= 0x01; /* UART DCD */
+ LPC_IOCON->PIO1_16 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_16 |= 0x01; /* UART RI */
+
+#else
+ LPC_IOCON->PIO1_19 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_19 |= 0x01; /* UART DTR */
+ LPC_IOCON->PIO1_20 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_20 |= 0x01; /* UART DSR */
+ LPC_IOCON->PIO1_21 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_21 |= 0x01; /* UART DCD */
+ LPC_IOCON->PIO1_22 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_22 |= 0x01; /* UART RI */
+#endif
+ LPC_USART->MCR = 0xC0; /* Enable Auto RTS and Auto CTS. */
+ return;
+}
+#endif
+
+/***********************************************************************
+ *
+ * Function: uart_set_divisors
+ *
+ * Purpose: Determines best dividers to get a target clock rate
+ *
+ * Processing:
+ * See function.
+ *
+ * Parameters:
+ * UARTClk : UART clock
+ * baudrate : Desired UART baud rate
+ *
+ * Outputs:
+ * baudrate : Sets the estimated buadrate value in DLL, DLM, and FDR.
+ *
+ * Returns: Error status.
+ *
+ * Notes: None
+ *
+ **********************************************************************/
+uint32_t uart_set_divisors(uint32_t UARTClk, uint32_t baudrate)
+{
+ uint32_t uClk;
+ uint32_t calcBaudrate = 0;
+ uint32_t temp = 0;
+
+ uint32_t mulFracDiv, dividerAddFracDiv;
+ uint32_t diviser = 0 ;
+ uint32_t mulFracDivOptimal = 1;
+ uint32_t dividerAddOptimal = 0;
+ uint32_t diviserOptimal = 0;
+
+ uint32_t relativeError = 0;
+ uint32_t relativeOptimalError = 100000;
+
+ /* get UART block clock */
+ uClk = UARTClk >> 4; /* div by 16 */
+ /* In the Uart IP block, baud rate is calculated using FDR and DLL-DLM registers
+ * The formula is :
+ * BaudRate= uClk * (mulFracDiv/(mulFracDiv+dividerAddFracDiv) / (16 * (DLL)
+ * It involves floating point calculations. That's the reason the formulae are adjusted with
+ * Multiply and divide method.*/
+ /* The value of mulFracDiv and dividerAddFracDiv should comply to the following expressions:
+ * 0 < mulFracDiv <= 15, 0 <= dividerAddFracDiv <= 15 */
+ for (mulFracDiv = 1; mulFracDiv <= 15; mulFracDiv++)
+ {
+ for (dividerAddFracDiv = 0; dividerAddFracDiv <= 15; dividerAddFracDiv++)
+ {
+ temp = (mulFracDiv * uClk) / ((mulFracDiv + dividerAddFracDiv));
+ diviser = temp / baudrate;
+ if ((temp % baudrate) > (baudrate / 2))
+ diviser++;
+
+ if (diviser > 2 && diviser < 65536)
+ {
+ calcBaudrate = temp / diviser;
+
+ if (calcBaudrate <= baudrate)
+ relativeError = baudrate - calcBaudrate;
+ else
+ relativeError = calcBaudrate - baudrate;
+
+ if ((relativeError < relativeOptimalError))
+ {
+ mulFracDivOptimal = mulFracDiv ;
+ dividerAddOptimal = dividerAddFracDiv;
+ diviserOptimal = diviser;
+ relativeOptimalError = relativeError;
+ if (relativeError == 0)
+ break;
+ }
+ } /* End of if */
+ } /* end of inner for loop */
+ if (relativeError == 0)
+ break;
+ } /* end of outer for loop */
+
+ if (relativeOptimalError < (baudrate / 30))
+ {
+ /* Set the `Divisor Latch Access Bit` and enable so the DLL/DLM access*/
+ /* Initialise the `Divisor latch LSB` and `Divisor latch MSB` registers */
+ LPC_USART->DLM = (diviserOptimal >> 8) & 0xFF;
+ LPC_USART->DLL = diviserOptimal & 0xFF;
+
+ /* Initialise the Fractional Divider Register */
+ LPC_USART->FDR = ((mulFracDivOptimal & 0xF) << 4) | (dividerAddOptimal & 0xF);
+ return( TRUE );
+ }
+ return ( FALSE );
+}
+
+/*****************************************************************************
+** Function name: UARTInit
+**
+** Descriptions: Initialize UART0 port, setup pin select,
+** clock, parity, stop bits, FIFO, etc.
+**
+** parameters: UART baudrate
+** Returned value: None
+**
+*****************************************************************************/
+void UARTInit(uint32_t baudrate)
+{
+#if !AUTOBAUD_ENABLE
+ uint32_t Fdiv;
+#endif
+ volatile uint32_t regVal;
+
+ UARTTxEmpty = 1;
+ UARTCount = 0;
+
+ NVIC_DisableIRQ(UART_IRQn);
+ /* Select only one location from below. */
+#if 1
+ LPC_IOCON->PIO0_18 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO0_18 |= 0x01; /* UART RXD */
+ LPC_IOCON->PIO0_19 &= ~0x07;
+ LPC_IOCON->PIO0_19 |= 0x01; /* UART TXD */
+#endif
+#if 0
+ LPC_IOCON->PIO1_14 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_14 |= 0x03; /* UART RXD */
+ LPC_IOCON->PIO1_13 &= ~0x07;
+ LPC_IOCON->PIO1_13 |= 0x03; /* UART TXD */
+#endif
+#if 0
+ LPC_IOCON->PIO1_17 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_17 |= 0x02; /* UART RXD */
+ LPC_IOCON->PIO1_18 &= ~0x07;
+ LPC_IOCON->PIO1_18 |= 0x02; /* UART TXD */
+#endif
+#if 0
+ LPC_IOCON->PIO1_26 &= ~0x07; /* UART I/O config */
+ LPC_IOCON->PIO1_26 |= 0x02; /* UART RXD */
+ LPC_IOCON->PIO1_27 &= ~0x07;
+ LPC_IOCON->PIO1_27 |= 0x02; /* UART TXD */
+#endif
+
+ /* Enable UART clock */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<12);
+ LPC_SYSCON->UARTCLKDIV = 0x1; /* divided by 1 */
+
+ LPC_USART->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
+#if !AUTOBAUD_ENABLE
+#if FDR_CALIBRATION
+ if ( uart_set_divisors(SystemCoreClock/LPC_SYSCON->UARTCLKDIV, baudrate) != TRUE )
+ {
+ Fdiv = ((SystemCoreClock/LPC_SYSCON->UARTCLKDIV)/16)/baudrate ; /*baud rate */
+ LPC_USART->DLM = Fdiv / 256;
+ LPC_USART->DLL = Fdiv % 256;
+ LPC_USART->FDR = 0x10; /* Default */
+ }
+#else
+ Fdiv = ((SystemCoreClock/LPC_SYSCON->UARTCLKDIV)/16)/baudrate ; /*baud rate */
+ LPC_USART->DLM = Fdiv / 256;
+ LPC_USART->DLL = Fdiv % 256;
+ LPC_USART->FDR = 0x10; /* Default */
+#endif
+#endif
+ LPC_USART->LCR = 0x03; /* DLAB = 0 */
+ LPC_USART->FCR = 0x07; /* Enable and reset TX and RX FIFO. */
+
+ /* Read to clear the line status. */
+ regVal = LPC_USART->LSR;
+
+ /* Ensure a clean start, no data in either TX or RX FIFO. */
+ while (( LPC_USART->LSR & (LSR_THRE|LSR_TEMT)) != (LSR_THRE|LSR_TEMT) );
+ while ( LPC_USART->LSR & LSR_RDR )
+ {
+ regVal = LPC_USART->RBR; /* Dump data from RX FIFO */
+ }
+
+ /* Enable the UART Interrupt */
+ NVIC_EnableIRQ(UART_IRQn);
+
+#if TX_INTERRUPT
+ LPC_USART->IER = IER_RBR | IER_THRE | IER_RLS; /* Enable UART interrupt */
+#else
+ LPC_USART->IER = IER_RBR | IER_RLS; /* Enable UART interrupt */
+#endif
+#if AUTOBAUD_ENABLE
+ LPC_USART->IER |= IER_ABEO | IER_ABTO;
+#endif
+ return;
+}
+
+/*****************************************************************************
+** Function name: UARTSend
+**
+** Descriptions: Send a block of data to the UART 0 port based
+** on the data length
+**
+** parameters: buffer pointer, and data length
+** Returned value: None
+**
+*****************************************************************************/
+void UARTSend(uint8_t *BufferPtr, uint32_t Length)
+{
+
+ while ( Length != 0 )
+ {
+ /* THRE status, contain valid data */
+#if !TX_INTERRUPT
+ while ( !(LPC_USART->LSR & LSR_THRE) );
+ LPC_USART->THR = *BufferPtr;
+#else
+ /* Below flag is set inside the interrupt handler when THRE occurs. */
+ while ( !(UARTTxEmpty & 0x01) );
+ LPC_USART->THR = *BufferPtr;
+ UARTTxEmpty = 0; /* not empty in the THR until it shifts out */
+#endif
+ BufferPtr++;
+ Length--;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: print_string
+**
+** Descriptions: print out string on the terminal
+**
+** parameters: pointer to the string end with NULL char.
+** Returned value: none.
+**
+*****************************************************************************/
+void print_string( uint8_t *str_ptr )
+{
+ while(*str_ptr != 0x00)
+ {
+ while((LPC_USART->LSR & 0x60) != 0x60);
+ LPC_USART->THR = *str_ptr;
+ str_ptr++;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: get_key
+**
+** Descriptions: Get a character from the terminal
+**
+** parameters: None
+** Returned value: character, zero is none.
+**
+*****************************************************************************/
+uint8_t get_key( void )
+{
+ uint8_t dummy;
+
+ while ( !(LPC_USART->LSR & 0x01) );
+ dummy = LPC_USART->RBR;
+ if ((dummy>=65) && (dummy<=90))
+ {
+ /* convert capital to non-capital character, A2a, B2b, C2c. */
+ dummy +=32;
+ }
+ /* echo */
+ LPC_USART->THR = dummy;
+ return(dummy);
+}
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
diff -r 000000000000 -r 05d110ee258e uart.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/uart.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,72 @@ +/**************************************************************************** + * $Id:: uart.h 9155 2012-02-14 23:23:34Z nxp41306 $ + * Project: NXP LPC11Uxx software example + * + * Description: + * This file contains definition and prototype for UART configuration. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __UART_H +#define __UART_H + +#define AUTOBAUD_ENABLE 0 +#define FDR_CALIBRATION 0 +#define RS485_ENABLED 0 +#define TX_INTERRUPT 0 /* 0 if TX uses polling, 1 interrupt driven. */ +#define MODEM_TEST 0 + +#define IER_RBR (0x01<<0) +#define IER_THRE (0x01<<1) +#define IER_RLS (0x01<<2) +#define IER_ABEO (0x01<<8) +#define IER_ABTO (0x01<<9) + +#define IIR_PEND 0x01 +#define IIR_RLS 0x03 +#define IIR_RDA 0x02 +#define IIR_CTI 0x06 +#define IIR_THRE 0x01 +#define IIR_ABEO (0x01<<8) +#define IIR_ABTO (0x01<<9) + +#define LSR_RDR (0x01<<0) +#define LSR_OE (0x01<<1) +#define LSR_PE (0x01<<2) +#define LSR_FE (0x01<<3) +#define LSR_BI (0x01<<4) +#define LSR_THRE (0x01<<5) +#define LSR_TEMT (0x01<<6) +#define LSR_RXFE (0x01<<7) + +#define BUFSIZE 0x40 + +/* RS485 mode definition. */ +#define RS485_NMMEN (0x1<<0) +#define RS485_RXDIS (0x1<<1) +#define RS485_AADEN (0x1<<2) +#define RS485_SEL (0x1<<3) +#define RS485_DCTRL (0x1<<4) +#define RS485_OINV (0x1<<5) + +void ModemInit( void ); +void UARTInit(uint32_t Baudrate); +void UART_IRQHandler(void); +void UARTSend(uint8_t *BufferPtr, uint32_t Length); +void print_string( uint8_t *str_ptr ); +uint8_t get_key( void ); + +#endif /* end __UART_H */ +/***************************************************************************** +** End Of File +******************************************************************************/
diff -r 000000000000 -r 05d110ee258e usart.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/usart.h Sun May 27 23:59:30 2012 +0000 @@ -0,0 +1,44 @@ +/**************************************************************************** + * $Id:: usart.h 6172 2011-01-13 18:22:51Z usb00423 $ + * Project: NXP LPC11xx software example + * + * Description: + * This file contains definition and prototype for UART configuration. + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __USART_H +#define __USART_H + +/* Synchronous mode control register definition. */ +#define SYNC_ON (0x1<<0) +#define SYNC_OFF (0x0<<0) + +#define SYNC_MASTER (0x1<<1) +#define SYNC_SLAVE (0x0<<1) + +#define SYNC_RE (0x0<<2) +#define SYNC_FE (0x1<<2) + +#define SYNC_CONT_CLK_EN (0x1<<4) +#define SYNC_CONT_CLK_DIS (0x0<<4) + +#define SYNC_STARTSTOPOFF (0x1<<5) +#define SYNC_STARTSTOPON (0x0<<5) + +#define SYNC_CON_CLK_CLR (0x1<<6) + +#endif /* end __USART_H */ +/***************************************************************************** +** End Of File +******************************************************************************/