File content as of revision 0:3428868dfe50:

#include "mbed.h"
#include "DHT11.h"
/*
   This basic example just shows how to read the ADC internal channels raw values.
   Please look in the corresponding device reference manual for a complete
   description of how to make a temperature sensor, VBat or Vref measurement.
*/

AnalogIn adc_temp(ADC_TEMP);
AnalogIn adc_vref(ADC_VREF);
#if defined(TARGET_DISCO_F051R8) || defined(TARGET_NUCLEO_F030R8) || defined(TARGET_NUCLEO_F031K6) || defined(TARGET_NUCLEO_F042K6) || defined(TARGET_NUCLEO_F070RB) || defined(TARGET_NUCLEO_F072RB) || defined(TARGET_NUCLEO_F091RC) || defined(TARGET_NUCLEO_F207ZG) || defined(TARGET_NUCLEO_F302R8) || defined(TARGET_NUCLEO_F303K8) || defined(TARGET_DISCO_F303VC) || defined(TARGET_NUCLEO_F303RE) || defined(TARGET_NUCLEO_F303ZE) || defined(TARGET_DISCO_F334C8) || defined(TARGET_NUCLEO_F334R8) || defined(TARGET_MTS_DRAGONFLY_F411RE) || defined(TARGET_MTS_MDOT_F405RG) || defined(TARGET_MTS_MDOT_F411RE) || defined(TARGET_DISCO_F401VC) || defined(TARGET_NUCLEO_F401RE) || defined(TARGET_ARCH_MAX) || defined(TARGET_DISCO_F407VG) || defined(TARGET_NUCLEO_F410RB) || defined(TARGET_ELMO_F411RE) || defined(TARGET_NUCLEO_F411RE) || defined(TARGET_NUCLEO_F412ZG) || defined(TARGET_DISCO_F413ZH) || defined(TARGET_DISCO_F429ZI) || defined(TARGET_NUCLEO_F429ZI) || defined(TARGET_NUCLEO_F439ZI) || defined(TARGET_B96B_F446VE) || defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F446ZE) || defined(TARGET_DISCO_F469NI) || defined(TARGET_DISCO_F746NG) || defined(TARGET_NUCLEO_F746ZG) || defined(TARGET_NUCLEO_F756ZG) || defined(TARGET_NUCLEO_F767ZI) || defined(TARGET_DISCO_F769NI) || defined(TARGET_DISCO_L072CZ_LRWAN1) || defined(TARGET_NUCLEO_L432KC) || defined(TARGET_DISCO_L476VG) || defined(TARGET_NUCLEO_L476RG) || defined(TARGET_NUCLEO_L486RG) 
AnalogIn adc_vbat(ADC_VBAT); // Warning: Not available on all devices
#endif

//DigitalOut led(LED1);
//DigitalIn sf(D7);
//DHT11 d(PA_8);
DHT11 d(PA_8); 

int main()
{ 
    float t;
    float h;

    while (true) {
        int s;
     s = d.readData();
     if (s != DHT11::OK) {
         printf("Error! %d\r\n", s);
     }
     else {
         printf("T:%d, H:%d\r\n", d.readTemperature(), d.readHumidity());
     }
     wait_ms(5000);
        /*h = sf;
        t = d.readHumidity();
        printf("%f", t);
        printf(" %f\n\r", h);
        wait_ms(500);*/
    }
    /*printf("\nSTM32 ADC internal channels reading example\n");
    while(1) {
        printf("ADC Temp = %f\n", (adc_temp.read()*100));
        printf("ADC VRef = %f\n", adc_vref.read());         
        #if defined(TARGET_DISCO_F051R8) || defined(TARGET_NUCLEO_F030R8) || defined(TARGET_NUCLEO_F031K6) || defined(TARGET_NUCLEO_F042K6) || defined(TARGET_NUCLEO_F070RB) || defined(TARGET_NUCLEO_F072RB) || defined(TARGET_NUCLEO_F091RC) || defined(TARGET_NUCLEO_F207ZG) || defined(TARGET_NUCLEO_F302R8) || defined(TARGET_NUCLEO_F303K8) || defined(TARGET_DISCO_F303VC) || defined(TARGET_NUCLEO_F303RE) || defined(TARGET_NUCLEO_F303ZE) || defined(TARGET_DISCO_F334C8) || defined(TARGET_NUCLEO_F334R8) || defined(TARGET_MTS_DRAGONFLY_F411RE) || defined(TARGET_MTS_MDOT_F405RG) || defined(TARGET_MTS_MDOT_F411RE) || defined(TARGET_DISCO_F401VC) || defined(TARGET_NUCLEO_F401RE) || defined(TARGET_ARCH_MAX) || defined(TARGET_DISCO_F407VG) || defined(TARGET_NUCLEO_F410RB) || defined(TARGET_ELMO_F411RE) || defined(TARGET_NUCLEO_F411RE) || defined(TARGET_NUCLEO_F412ZG) || defined(TARGET_DISCO_F413ZH) || defined(TARGET_DISCO_F429ZI) || defined(TARGET_NUCLEO_F429ZI) || defined(TARGET_NUCLEO_F439ZI) || defined(TARGET_B96B_F446VE) || defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F446ZE) || defined(TARGET_DISCO_F469NI) || defined(TARGET_DISCO_F746NG) || defined(TARGET_NUCLEO_F746ZG) || defined(TARGET_NUCLEO_F756ZG) || defined(TARGET_NUCLEO_F767ZI) || defined(TARGET_DISCO_F769NI) || defined(TARGET_DISCO_L072CZ_LRWAN1) || defined(TARGET_NUCLEO_L432KC) || defined(TARGET_DISCO_L476VG) || defined(TARGET_NUCLEO_L476RG) || defined(TARGET_NUCLEO_L486RG) 
        printf("ADC VBat = %f\n", adc_vbat.read());
        printf("\033[3A");
        #else
        printf("\033[2A");
        #endif
        led = !led;
        wait(1.0);
    }*/
}