Akseer Ali Mirani / Mbed OS mbed-test-program-os5-v1.0
GitHub hosted
Public

This is an example program to test the working of mbed LPC1768 microcontroller.


Download repository: zip

mbed-test-program-os5-v1.0

  • This is an example program to test the working of Mbed LPC1768 microcontroller. In this program, the controller prints the measurements of on-board temperature
    and accelerometer sensors on serial monitor, updates the status of buzzer, and also shows the status of all the leds (LED1, LED2, LED3, LED4, Red led, Green led, &
    Blue led) with a sampling rate of 5 seconds. The graphical orientation data of data obtained from the on-board accelerometer is printed on on-board LCD as a bubble and the numerial readings of X/Y axis are printed on serial monitor. While the four leds (LED1 to Led4) are programmed to ON & OFF in the loop, the Red, Green, & Blue leds are turned ON/OFF based on the rising edge interrupt of joystick. This program also prints the status of joystick buttons on serial monitor whenever any joystick button is pressed.

  • Libraries used in this program

  • mbed.h –> main library of microcontroller
  • MMA7660.h –> library for on-board accelerometer
  • LM75B.h –> library for on-board temperature sensor
  • C12832.h –> library for on-board LCD