Revision 0:9eda4611081a, committed 2017-10-04

Comitter:

aismail1997

Date:

Wed Oct 04 14:47:07 2017 +0000

Commit message:

initial commit - servo and push buttons work;

Changed in this revision

diff -r 000000000000 -r 9eda4611081a Servo.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Servo.lib	Wed Oct 04 14:47:07 2017 +0000
@@ -0,0 +1,1 @@
+http://os.mbed.com/users/simon/code/Servo/#36b69a7ced07

diff -r 000000000000 -r 9eda4611081a main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Oct 04 14:47:07 2017 +0000
@@ -0,0 +1,53 @@
+#include "mbed.h"
+#include "Servo.h"
+
+PwmOut myservo(p21);
+DigitalIn pb1 (p20);
+//AnalogIn linpot(p20);
+Serial pc(USBTX, USBRX);
+DigitalOut myled(LED1);
+
+int main()
+{
+    // button up: state = 0, button halfway: state = 1; button down: state = 2
+    //int state = 0;
+    pc.printf("begin\n");
+    int state = 2;
+    pb1.mode(PullUp);
+    wait(.001);
+    for(int i=0; i<=3; i++) {
+        myservo = i/100.0;
+        wait(0.01);
+    }
+    while(1) {
+        // Servo code
+        if (pb1 == 1 && state == 2) {
+            while(pb1 == 1)
+                myled = 1;
+            // rotate 90 degrees one way
+            for(int i=3; i<=7; i++) {
+                myservo = i/100.0;
+                wait(0.01);
+            }
+            state = 1;
+        }
+        //wait(1.0);
+        // rotate 90 degrees other way
+        if (pb1 == 1 && state == 1) {
+            while(pb1 == 1)
+                myled = 0;
+            for(int i=7; i>3; i--) {
+                myservo = i/100.0;
+                wait(0.01);
+            }
+            //wait(0.1);
+            state = 2;
+        }
+        //wait(1.0);
+
+        // read linear potentiometer
+        //if (linpot < 0.5) {
+        //float potval = linpot;
+        //pc.printf("linear pot: %f\n", potval);
+    }
+}
\ No newline at end of file

diff -r 000000000000 -r 9eda4611081a mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Wed Oct 04 14:47:07 2017 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/675da3299148
\ No newline at end of file