Raharja Agie

Raharja’s activity

Reply to I2C freeze - hi guys, I meet the same problem now. i use mbed to control ESC BL-Ctrl …
Raharja Agie - 29 Oct 2011
Reply to i2c port dead - thanks guys for all yours suggestion
Raharja Agie - 18 Sep 2011
Reply to i2c port dead - Wim Huiskamp wrote: What is an 'ESC' module? References, datasheets would help.. Anyhow, the ESC …
Raharja Agie - 16 Sep 2011
Reply to i2c port dead - Should I use a level shifter or converter? If yes. Okay then. Can my mbed …
Raharja Agie - 16 Sep 2011
New topic i2c port dead - Dear Support Team, I have bad experience, I use i2c protocol to control some ESC-i2cs. …
Raharja Agie - 16 Sep 2011
Program: Mini-X
Raharja Agie - 16 Aug 2011
New topic i2c frequency: dear all, i have a simple question. what is the default frequency of the i2c? …
Raharja Agie - 26 Oct 2010
Reply to ADC Value - Thanks Thomas and Jon for your info, it really helps. My Senscom mini-A ultrasonic sensor …
Raharja Agie - 23 Aug 2010
Reply to ADC Value - And... how to reduce the noise?
Raharja Agie - 23 Aug 2010
New topic ADC Value: Dear forum, I try to read 3.3V regulated power source by the AnalogIn (p19). I …
Raharja Agie - 23 Aug 2010

Raharja’s public repositories

  • Mbed 2 deprecated
    Controller

    Read IMU data at Serial port (p28, p27), data rate <100Hz @115200bps Read 5 channels PPM signal at p11 using InterruptIn Send data via RF Modem at serial port (p13, …

    Last updated: 12 Aug 2010 1 27
  • Mbed 2 deprecated
    FlightController

    Read IMU data at Serial port (p28, p27), data rate <100Hz @115200bps Read 5 channels PPM signal at p11 using InterruptIn Send data via RF Modem at serial port (p13, …

    Last updated: 11 Aug 2010 1 33
  • Mbed 2 deprecated
    Mini-X

    Last updated: 16 Aug 2011 1 0
See all repositories