Revision 1:9f961d34dd8d, committed 2017-11-05

Comitter:

cdupaty

Date:

Sun Nov 05 17:02:22 2017 +0000

Parent:

0:9859cc8476f2

Child:

2:4eef0eca4d26

Commit message:

version OK avec mesure temperature

Changed in this revision

--- a/SX1272.lib	Sun Nov 05 14:32:09 2017 +0000
+++ b/SX1272.lib	Sun Nov 05 17:02:22 2017 +0000
@@ -1,1 +1,1 @@
-SX1272#d974bcee4f69
+SX1272#5d57c6a92509

--- a/main.cpp	Sun Nov 05 14:32:09 2017 +0000
+++ b/main.cpp	Sun Nov 05 17:02:22 2017 +0000
@@ -19,10 +19,14 @@
  *****************************************************************************
  * last update: Sep. 29th, 2017 by C. Pham
  * last update: oct 30th , 2017 by C.Dupaty
+ * ADAPTATION FOR NUCLEO STM32, TESTED ON NUCLEO-L073RZ
+ * ALL CONFIGURATIONS FOR ARDUINO HAVE BEEN REMOVED
+ * WORK ONLY IN EUROPE
+ * please visit http://cpham.perso.univ-pau.fr/LORA/LoRaDevices.html
+ * for ARDUINO version
  */
 #include "mbed.h"
-
-#include <SPI.h> 
+ 
 // Include the SX1272
 #include "SX1272.h"
 
@@ -112,9 +116,9 @@
 
 ///////////////////////////////////////////////////////////////////
 // CHANGE HERE THE READ PIN AND THE POWER PIN FOR THE TEMP. SENSOR
-#define TEMP_PIN_READ  PA_0
+#define TEMP_PIN_READ  PA_4
 // use digital 9 to power the temperature sensor if needed
-#define TEMP_PIN_POWER PA_1
+#define TEMP_PIN_POWER PB_0
 ///////////////////////////////////////////////////////////////////
 
 ///////////////////////////////////////////////////////////////////
@@ -155,7 +159,7 @@
 #define NB_RETRIES 2
 #endif
 
-#if defined ARDUINO_AVR_PRO || defined ARDUINO_AVR_MINI || defined ARDUINO_SAM_DUE || defined __MK20DX256__  || defined __MKL26Z64__ || defined __MK64FX512__ || defined __MK66FX1M0__ || defined __SAMD21G18A__
+#if defined ARDUINO_AVR_PRO || defined ARDUINO_AVR_MINI || defined ARDUINO_SAM_DUE || defined __MK20DX256__  || defined __MKL26Z64__ || defined __MK64FX512__ || defined __MK66FX1M0__ || defined __SAMD21G18A__ || TARGET_NUCLEO_L073RZ
   // if you have a Pro Mini running at 5V, then change here
   // these boards work in 3.3V
   // Nexus board from Ideetron is a Mini
@@ -165,7 +169,7 @@
   // __MKL26Z64__ is for TeensyLC
   // __SAMD21G18A__ is for Zero/M0 and FeatherM0 (Cortex-M0)
   #define TEMP_SCALE  3300.0
-#else // ARDUINO_AVR_NANO || defined ARDUINO_AVR_UNO || defined ARDUINO_AVR_MEGA2560 
+#else // ARDUINO_AVR_NANO || defined ARDUINO_AVR_UNO || defined ARDUINO_AVR_MEGA2560 || 
   // also for all other boards, so change here if required.
   #define TEMP_SCALE  5000.0
 #endif
@@ -216,7 +220,6 @@
 #endif
 
 // ajoute par C.Dupaty
-//Serial pcmain(USBTX, USBRX); // tx, rx
 DigitalOut temp_pin_power(TEMP_PIN_POWER);
 AnalogIn temp_pin_read(TEMP_PIN_READ);
 
@@ -249,10 +252,11 @@
 */
  
   // Print a start message
-  printf("%s","Simple LoRa temperature sensor\n");
-  printf("%s","--------------------------------\n");
-  printf("%s","---- VERSION NUCLEO STM32-------\n");
-  printf("%s","--------------------------------\n");
+  printf("%s","-------------------------------------------------\n");
+  printf("%s","------Simple LoRa temperature sensor-------------\n");
+  printf("%s","--P.Pharm, adaptation NUCELO STM32 C.Dupaty------\n");
+  printf("%s","-------------------------------------------------\n");
+ 
 #ifdef ARDUINO_AVR_PRO
   printf("%s","Arduino Pro Mini detected\n");  
 #endif
@@ -456,10 +460,10 @@
       for (int i=0; i<10; i++) {
           // change here how the temperature should be computed depending on your sensor type
           // 
-           value = temp_pin_read;
-          temp += (value*TEMP_SCALE/1024.0)/10;
+           value = temp_pin_read.read_u16();
+          temp += ((double)value*50.0/8192.0);
         
-          printf("%s","Reading ");
+          printf("%s","Reading ADC temperature -> ");
           printf("%d", value);
           printf("\n");   
           wait_ms(100);
@@ -467,7 +471,7 @@
       
 #ifdef LOW_POWER
       //digitalWrite(TEMP_PIN_POWER,LOW);
-      temp_pin_ower=0;
+      temp_pin_power=0;
 #endif
 
       printf("%s","Mean temp is ");