Diff: Socket/UDPSocket.cpp

Revision:

38:f13e4e563d65

Parent:

36:f33fcf5975ab

Child:

39:a1233ca02edf

diff -r f3a2053627c2 -r f13e4e563d65 Socket/UDPSocket.cpp
--- a/Socket/UDPSocket.cpp	Tue Jun 24 06:24:23 2014 +0000
+++ b/Socket/UDPSocket.cpp	Wed Jun 25 00:04:11 2014 +0000
@@ -52,10 +52,10 @@
     
     // Get local ip address.
     // Get buffer for response payload from MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf();
-    if( payload_buf == NULL )
+    tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf();
+    if( payload_buf_p == NULL )
     {
-        printf("UDP bind payload_buf NULL\r\n");
+        printf("UDP bind payload_buf_p NULL\r\n");
         return -1;
     }
 
@@ -65,33 +65,33 @@
     req.seq          = mUartRequestSeq++;
     req.interface    = 0;
     
-    unsigned char *command_array = snic_core_p->getCommandBuf();
+    unsigned char *command_array_p = snic_core_p->getCommandBuf();
     unsigned int  command_len;
     // Preparation of command
     command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, req.cmd_sid, (unsigned char *)&req
-                            , sizeof(C_SNIC_Core::tagSNIC_GET_DHCP_INFO_REQ_T), payload_buf->buf, command_array );
+                            , sizeof(C_SNIC_Core::tagSNIC_GET_DHCP_INFO_REQ_T), payload_buf_p->buf, command_array_p );
     // Send uart command request
-    snic_core_p->sendUart( command_len, command_array );
+    snic_core_p->sendUart( command_len, command_array_p );
     // Wait UART response
     ret = uartCmdMgr_p->wait();
     if( ret != 0 )
     {
         printf( "UDP bind failed\r\n" );
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
     
     if( uartCmdMgr_p->getCommandStatus() != UART_CMD_RES_SNIC_SUCCESS )
     {
         printf("UDP bind status:%02x\r\n", uartCmdMgr_p->getCommandStatus());
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
     
-    unsigned int local_addr = (payload_buf->buf[9]  << 24)
-                            | (payload_buf->buf[10] << 16)
-                            | (payload_buf->buf[11] << 8)
-                            | (payload_buf->buf[12]);
+    unsigned int local_addr = (payload_buf_p->buf[9]  << 24)
+                            | (payload_buf_p->buf[10] << 16)
+                            | (payload_buf_p->buf[11] << 8)
+                            | (payload_buf_p->buf[12]);
 
 
     C_SNIC_Core::tagSNIC_UDP_CREATE_SOCKET_REQ_T create_req;
@@ -107,26 +107,26 @@
 
     // Preparation of command
     command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, create_req.cmd_sid, (unsigned char *)&create_req
-                            , sizeof(C_SNIC_Core::tagSNIC_UDP_CREATE_SOCKET_REQ_T), payload_buf->buf, command_array );
+                            , sizeof(C_SNIC_Core::tagSNIC_UDP_CREATE_SOCKET_REQ_T), payload_buf_p->buf, command_array_p );
     // Send uart command request
-    snic_core_p->sendUart( command_len, command_array );
+    snic_core_p->sendUart( command_len, command_array_p );
 
     // Wait UART response
     ret = uartCmdMgr_p->wait();
     if( ret != 0 )
     {
         printf( "UDP bind failed\r\n" );
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
 
     if( uartCmdMgr_p->getCommandStatus() != 0 )
     {
         printf("UDP bind status:%02x\r\n", uartCmdMgr_p->getCommandStatus());
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
-    mSocketID = payload_buf->buf[3];
+    mSocketID = payload_buf_p->buf[3];
     
     C_SNIC_Core::tagSNIC_UDP_START_RECV_REQ_T recv_start_req;
     
@@ -139,27 +139,27 @@
 
     // Preparation of command
     command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, recv_start_req.cmd_sid, (unsigned char *)&recv_start_req
-                            , sizeof(C_SNIC_Core::tagSNIC_UDP_START_RECV_REQ_T), payload_buf->buf, command_array );
+                            , sizeof(C_SNIC_Core::tagSNIC_UDP_START_RECV_REQ_T), payload_buf_p->buf, command_array_p );
     // Send uart command request
-    snic_core_p->sendUart( command_len, command_array );
+    snic_core_p->sendUart( command_len, command_array_p );
 
     // Wait UART response
     ret = uartCmdMgr_p->wait();
     if( ret != 0 )
     {
         printf( "UDP recv start failed\r\n" );
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
 
     if( uartCmdMgr_p->getCommandStatus() != 0 )
     {
         printf("UDP recv start status:%02x\r\n", uartCmdMgr_p->getCommandStatus());
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
 
-    snic_core_p->freeCmdBuf( payload_buf );
+    snic_core_p->freeCmdBuf( payload_buf_p );
     
     return 0;
 }
@@ -171,10 +171,10 @@
     C_SNIC_UartCommandManager *uartCmdMgr_p = snic_core_p->getUartCommand();
 
     // Get buffer for response payload from MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = snic_core_p->allocCmdBuf();
-    if( payload_buf == NULL )
+    tagMEMPOOL_BLOCK_T *payload_buf_p = snic_core_p->allocCmdBuf();
+    if( payload_buf_p == NULL )
     {
-        printf("connect payload_buf NULL\r\n");
+        printf("connect payload_buf_p NULL\r\n");
         return -1;
     }
     
@@ -197,31 +197,31 @@
     memcpy( send_buf_p, &req, req_size );
     memcpy( &send_buf_p[req_size], packet, length );
     
-    unsigned char *command_array = snic_core_p->getCommandBuf();
+    unsigned char *command_array_p = snic_core_p->getCommandBuf();
     unsigned int   command_len;
     // Preparation of command
     command_len = snic_core_p->preparationSendCommand( UART_CMD_ID_SNIC, req.cmd_sid, (unsigned char *)send_buf_p
-                            , req_size + length, payload_buf->buf, command_array );
+                            , req_size + length, payload_buf_p->buf, command_array_p );
 
     // Send uart command request
-    snic_core_p->sendUart( command_len, command_array );
+    snic_core_p->sendUart( command_len, command_array_p );
 
     // Wait UART response
     int ret = uartCmdMgr_p->wait();
     if( ret != 0 )
     {
         printf( "send failed\r\n" );
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
     
     if( uartCmdMgr_p->getCommandStatus() != UART_CMD_RES_SNIC_SUCCESS )
     {
         printf("send status:%02x\r\n", uartCmdMgr_p->getCommandStatus());
-        snic_core_p->freeCmdBuf( payload_buf );
+        snic_core_p->freeCmdBuf( payload_buf_p );
         return -1;
     }
-    snic_core_p->freeCmdBuf( payload_buf );
+    snic_core_p->freeCmdBuf( payload_buf_p );
 
     // SNIC_SEND_FROM_SOCKET_REQ
     return 0;