Vybhav Kadaba / Mbed OS EV-PRO-MW1001_Development_v11570
Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers admw_spi.cpp Source File

admw_spi.cpp

Go to the documentation of this file.
00001 /******************************************************************************
00002 Copyright 2017 (c) Analog Devices, Inc.
00003 
00004 All rights reserved.
00005 
00006 Redistribution and use in source and binary forms, with or without
00007 modification, are permitted provided that the following conditions are met:
00008   - Redistributions of source code must retain the above copyright
00009     notice, this list of conditions and the following disclaimer.
00010   - Redistributions in binary form must reproduce the above copyright
00011     notice, this list of conditions and the following disclaimer in
00012     the documentation and/or other materials provided with the
00013     distribution.
00014   - Neither the name of Analog Devices, Inc. nor the names of its
00015     contributors may be used to endorse or promote products derived
00016     from this software without specific prior written permission.
00017   - The use of this software may or may not infringe the patent rights
00018     of one or more patent holders. This license does not release you
00019     from the requirement that you obtain separate licenses from these
00020     patent holders to use this software.
00021   - Use of the software either in source or binary form, must be run
00022     on or directly connected to an Analog Devices Inc. component.
00023 
00024 THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
00025 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
00026 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
00027 IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
00028 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
00029 LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
00030 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00031 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00032 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00033 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00034  *
00035  *****************************************************************************/
00036 
00037 /*!
00038  ******************************************************************************
00039  * @file:
00040  * @brief:  ADMW OS-dependent wrapper layer for SPI interface
00041  *-----------------------------------------------------------------------------
00042  */
00043 
00044 #include <mbed.h>
00045 
00046 #include "inc/admw_spi.h"
00047 #include "inc/admw_log.h"
00048 
00049 #define ADMW_SPI_MODE       0 /* CPOL=0, CPHA=0 */
00050 #define ADMW_SPI_FRAME_SIZE 8 /* 8-bit frame size */
00051 
00052 
00053 #ifdef __cplusplus
00054 extern "C" {
00055 #endif
00056 
00057 
00058 // Struct to contain anything needed to identify the SPI device
00059 // This is returned as a ADMW_SPI_HANDLE*, and is required to use
00060 // the other SPI functions
00061 typedef struct {
00062     SPI *_spi;
00063     DigitalOut *_cs;
00064     DigitalOut *_wakeup;
00065 } SpiContext_t;
00066 
00067 
00068 /*
00069  * Open the SPI interface and allocate resources
00070  */
00071 ADMW_RESULT  admw_SpiOpen(
00072     ADMW_PLATFORM_SPI_CONFIG *pConfig,
00073     ADMW_SPI_HANDLE  *phDevice)
00074 {
00075     SpiContext_t *pCtx = (SpiContext_t*)malloc(sizeof(*pCtx));
00076     if(!pCtx) {
00077         ADMW_LOG_ERROR("Failed to allocate memory for SPI device");
00078         return ADMW_NO_MEM ;
00079     }
00080     
00081     pCtx->_spi = new SPI((PinName)pConfig->mosiPin,
00082                 (PinName)pConfig->misoPin,
00083                 (PinName)pConfig->sckPin);
00084     pCtx->_cs = new DigitalOut((PinName)pConfig->csPin, 1);
00085     
00086     pCtx->_spi->format(ADMW_SPI_FRAME_SIZE, ADMW_SPI_MODE);
00087     pCtx->_spi->frequency(pConfig->maxSpeedHz);
00088     
00089     pCtx->_wakeup = new DigitalOut((PinName)pConfig->wakeupPin, 1);
00090     
00091     *phDevice = (ADMW_SPI_HANDLE )pCtx;
00092     
00093     return ADMW_SUCCESS ;
00094 }
00095 
00096 ADMW_RESULT 
00097 admw_SpiReceive(
00098     ADMW_SPI_HANDLE  hDevice,
00099     void *pTxData,
00100     void *pRxData,
00101     unsigned nLength,
00102     bool bCsHold)
00103 {
00104     SpiContext_t *pCtx = (SpiContext_t*)hDevice;
00105     
00106     pCtx->_spi->format(ADMW_SPI_FRAME_SIZE, 1);
00107     
00108     int rc = 0;
00109    
00110     *(pCtx->_wakeup) = 1;
00111     wait_us(31);
00112     *(pCtx->_cs) = 0;
00113      
00114     rc  = pCtx->_spi->write((char*)(pTxData), pTxData ? nLength : 0,
00115                      (char*)(pRxData), pRxData ? nLength : 0);
00116     
00117     if ((rc < 0) || !bCsHold)
00118         *(pCtx->_cs) = 1;
00119     
00120        *(pCtx->_wakeup) = 0;
00121        
00122     if (rc < 0)
00123     {
00124         ADMW_LOG_ERROR("Failed to complete SPI transfer");
00125         return ADMW_FAILURE ;
00126     }
00127     
00128     pCtx->_spi->format(ADMW_SPI_FRAME_SIZE, ADMW_SPI_MODE);
00129     
00130     return ADMW_SUCCESS ;
00131 }
00132 
00133 /*
00134  * Execute a bi-directional data transfer on the SPI interface
00135  */
00136 ADMW_RESULT 
00137 admw_SpiTransfer(
00138     ADMW_SPI_HANDLE  hDevice,
00139     void *pTxData,
00140     void *pRxData,
00141     unsigned nLength,
00142     bool bCsHold)
00143 {
00144     int rc = 0;
00145     
00146     SpiContext_t *pCtx = (SpiContext_t*)hDevice;
00147 
00148     *(pCtx->_wakeup) = 1;
00149     wait_us(31);
00150     *(pCtx->_cs) = 0;
00151     *(pCtx->_wakeup) = 0;
00152     rc  = pCtx->_spi->write((char*)(pTxData), pTxData ? nLength : 0,
00153                      (char*)(pRxData), pRxData ? nLength : 0);
00154     
00155     if ((rc < 0) || !bCsHold)
00156         *(pCtx->_cs) = 1;
00157 
00158     if (rc < 0)
00159     {
00160         ADMW_LOG_ERROR("Failed to complete SPI transfer");
00161         return ADMW_FAILURE ;
00162     }
00163     
00164     return ADMW_SUCCESS ;
00165 }
00166 
00167 /*
00168  * Close the SPI interface and free resources
00169  */
00170 void admw_SpiClose(
00171     ADMW_SPI_HANDLE  hDevice)
00172 {
00173     SpiContext_t *pCtx = (SpiContext_t *)hDevice;
00174 
00175     delete pCtx->_spi;
00176     delete pCtx->_cs;
00177     delete pCtx->_wakeup;
00178     
00179     free(pCtx);
00180 }
00181 
00182 #ifdef __cplusplus
00183 }
00184 #endif
00185 
00186 /*!
00187  * @}
00188  */