Vybhav Kadaba / Mbed OS EV-PRO-MW1001_82_25

. Reverting Mbed firmware to support customers using ADMW1001 device firmware v82.25. 2. New Mbed firmware will be available when ADMW1001 device firmware is released to the public. 3. SPI speed is reduced to 700KHz 4.The program compiled and tested with device FW v82.25

Changes

RevisionDateWhoCommit message
51:e013f4d2fb9a 2020-03-06 Vkadaba 1. Reverting Mbed firmware to support customers using ADMW1001 device firmware v82.25.; 2. New Mbed firmware will be available when ADMW1001 device firmware is released to the public. ; 3. SPI speed is reduced to 700KHz default tip
50:d84305e5e1c0 2020-02-17 Vkadaba Mbed Firmware Update to support Device FW v1.12.061
49:c31473bc013e 2020-02-06 Vkadaba Changed comment
48:5731f1aa2c5a 2020-02-06 Vkadaba Added wakeup support
47:5b42b9f9d1eb 2020-02-06 Vkadaba Changed ADMW_CONFIG struct variable name to "measureware_config"
46:2c697a0cbbed 2020-01-20 Vkadaba DEFAULT_LUT config for bridge config
45:f5f553b8c0d5 2020-01-20 Vkadaba Added AVDD support
44:94bdfaefddac 2020-01-16 Vkadaba Register map changes
43:e1789b7214cf 2020-01-07 Vkadaba Added CycleTime units in seconds Added global scopes for .excitationState and .groundSwitch on mbed and added same on all config files
42:c9c5a22e539e 2019-12-10 Vkadaba Printing correct firmware version
41:df78b7d7b675 2019-12-10 Vkadaba MWARE-1930 fixed
40:bc626b6918d0 2019-11-21 Vkadaba default config is Ktype
39:e255f52072fc 2019-11-21 Vkadaba added continue in utils.c to fix the wrong measurement from being displayed
38:7604d3b44dd5 2019-11-21 Vkadaba Default config is thermocouple k type
37:6acfbb4405cd 2019-11-21 Vkadaba Config files updated
36:54e2418e7620 2019-11-19 Vkadaba Added open circuit detection support to host ; Added VOUT sensor support to host
35:cf6a5a005a58 2019-11-19 Vkadaba externalRefVoltage changed to 0.0
34:b60ee1e0af2b 2019-11-19 Vkadaba External Voltage Reference support
33:df7a00f1b8e1 2019-11-14 Vkadaba Added support for the following:; 1.Rsense; 2.Excitation current state; 3.Buffer bypass ; ; the aobve support is only for analog sensors.; Tested and the system is working fine
32:52445bef314d 2019-10-25 Vkadaba Register map updated.; Files changed:; 1. ADMW1001_REGISTERS.h; 2.ADMW1001_REGISTERS_typedefs.h; 3.admw_api.h; ; Changes are done to support the new register map. ; Files changed:; 1.utils.c; 2.admw1001.c; ; admw_spi.cpp file is changed to test DRDY issue ;
31:8ab5d9a29a9f 2019-10-23 malavikasaji README.txt was in binary format. Fixing this so that the README file can be read on Mbed ADI code web page.
30:c78466adc502 2019-10-03 Vkadaba Setting default config to thermocouple sensor
29:713c24b07795 2019-10-03 Vkadaba SPI lines names changed to D pin names
28:8a7a908a8fdb 2019-10-03 Vkadaba Code clean up and config files updated
27:4c8d8ee6fcbd 2019-10-03 Vkadaba Added rtd_4w_config file and tested
26:07a0635eae6e 2019-10-03 Vkadaba Config files updated
25:b278a215cf3b 2019-10-01 Vkadaba Added README.txt file
24:2d2cb6ac71fd 2019-09-27 Vkadaba Replaced license.txt
23:bb685f35b08b 2019-09-26 Vkadaba Fixing code alignment
22:2835e9e9f59f 2019-09-26 Vkadaba License.txt file added
21:8e00425b8096 2019-09-11 Vkadaba A minor change in main.cpp
20:f94859dd2ca0 2019-09-11 Vkadaba Removed multichannel config file- It was created for my reference for debugging MWARE-1612
19:09d58952b65d 2019-09-09 Vkadaba AdSense, ADI Sense, ADISNS1000 are replaced with ADMW1001
18:cbf514cce921 2019-08-20 Vkadaba Added No excitation current config in host firmware
17:2f0028880874 2019-08-07 Vkadaba filter parameter - filterChop replaced with chopMode
16:327cea5a86e9 2019-07-26 Vkadaba Minor change in load_cell_config.c file
15:b5d57daeb7c0 2019-07-26 Vkadaba Modified the copyright notice
14:266ab283b086 2019-07-25 Vkadaba Added deviceInformation function to get the firmware version Id
13:97cb32670539 2019-07-25 Vkadaba admw1001.c file is updated ; ; config version changed to 2.0 from 1.7
12:8f21099b8028 2019-07-24 Vkadaba Initial Commit
11:8e6023d2e584 2019-07-15 Vkadaba sensor2_bridge_4w_load_cell_config.c file is updated and able to download the bin file .
10:14954555be2a 2019-06-21 Vkadaba Added print sample function in utilities and tested. Getting samples now
9:dc77fcfa7eba 2019-06-21 Vkadaba SPI_CS pin is changed from D9 to D10 and PLATFORM_GPIO_ALERT_ERROR is changed to PLATFORM_GPIO_STATUS
8:2f2775c34640 2019-06-20 Vkadaba admw1001 files are updated and code clean up is done. Project is building.
7:e75e825c04a4 2019-06-18 Vkadaba Changed channel name in sensor0_typeK_cjc0_config.c
6:9d393a9677f4 2019-06-15 Vkadaba Register map is updated and sensor config files are modified
5:0728bde67bdb 2019-06-05 Vkadaba Replaced all references to ADISense/ADISENSE1000/adi_sense with ADMW/ADMW1001/admw and the prject builds.
4:2ca06eee5735 2019-06-04 abrophy Changed channel ID check for RTDs - all RTDs are now CJC channels only.
3:cc09ac626ab3 2019-04-29 abrophy Chanegd type of rawValue in ADI_SENSE_DATA_SAMPLE to be int32_t instead of uint32_t, i.e. signed instead of unsigned.
2:e391aa125721 2019-04-26 abrophy Changed logging of samples to record hex and floating point value for raw sample.
1:63dd03580de4 2019-04-15 ADIJake Updated pinout for EV-ProMW1001ARDS. ALERT pin ignored for now due to bug in firmware.
0:85855ecd3257 2019-04-01 ADIJake Initial Commit