Revision 0:f6a51823dfa8, committed 2015-04-06

Comitter:

TuanPM

Date:

Mon Apr 06 06:43:53 2015 +0000

Commit message:

ok

Changed in this revision

diff -r 000000000000 -r f6a51823dfa8 esptool.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/esptool.cpp	Mon Apr 06 06:43:53 2015 +0000
@@ -0,0 +1,81 @@
+#include "esptool.h" 
+
+ESPTOOL::ESPTOOL(Serial& serial, PinName pinEnable, PinName pinProgram): _pinEn(pinEnable, _pinPro(pinProgram) {
+    _serial = serial;
+    _serial.baud(115200);
+}
+uint8_t ESPTOOL::read(){
+    uint8_t data = _serial.getc();
+    if(data == 0xDB){
+        data = _serial.getc();
+        if(data == 0xDC)
+            return 0xC0;
+        else if(data == 0xDD)
+            return 0xDB;
+        else
+            while(1);    
+    } else 
+        return data;   
+}
+void ESPTOOL::read(uint8_t *data, uint32_t len){
+    while(len --)
+        *data ++ = read();
+}
+
+void ESPTOOL:write(uint8_t *data, uint32_t len){
+     uint8_t* buf_send = data, data_send;
+     
+     while(len--){
+         data_send = *buf_send++;
+        if(data_send == 0xDB){
+            _serial.putc(0xDB);
+            _serial.putc(0xDD);     
+        } else if(data_send == 0xC0) {
+            _serial.putc(0xDB);
+            _serial.putc(0xDC);    
+        } else {
+            _serial.putc(data_send);    
+        }
+     }
+     
+}
+uint8_t ESPTOOL::command(uint8_t op, uint8_t *data, uint16_t data_len, uint32_t ck, uint8_t *recv_data, uint16_t *recv_len) {
+    uint8_t header[8];
+    _serial.putc(0xC0);
+    _serial.putc(0x00);
+    write(&op, 1);
+    write((uint8_t*)&data_len, 2);
+    write((uint8_t*)&ck, 4);
+    _serial.putc(0xC0);
+    
+    if(_serial.getc() != 0xC0)
+        return 0;
+    read(header, 8);
+    
+    if(header[0] != 0x01 || header[1] != op)
+        return 0;
+    recv_len = (uint16_t*)&header[2];
+    read(recv_data, *recv_len);
+    if(_serial.getc() != 0xC0)
+        return 0;
+        
+    return 1;
+}
+
+uint8_t ESPTOOL::connect() {
+    _pinEn = 0;
+    _pinPro = 0;
+    wait(0.2);
+    _pinEn = 1;
+    while(_serial.available())
+        _serial.getc();
+       
+}
+uint8_t ESPTOOL::sync(){
+    uint8_t i;
+    uint8_t sync_frame[5] = {0x07, 0x07, 0x12, 0x20, 0x55*32};
+    uint8_t recv_frame[5];
+    uint8_t recv_len;
+    for(i=0; i<7; i++)
+        command(ESP_SYNC, sync_frame, 5, 0, recv_frame, &faerecv_len);
+}
\ No newline at end of file

diff -r 000000000000 -r f6a51823dfa8 esptool.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/esptool.h	Mon Apr 06 06:43:53 2015 +0000
@@ -0,0 +1,47 @@
+#ifndef _ESPTOOL_H_
+#define _ESPTOOL_H_
+#include "mbed.h"
+#define ESP_FLASH_BEGIN  0x02
+#define ESP_FLASH_DATA   0x03
+#define ESP_FLASH_END    0x04
+#define ESP_MEM_BEGIN    0x05
+#define ESP_MEM_END      0x06
+#define ESP_MEM_DATA     0x07
+#define ESP_SYNC         0x08
+#define ESP_WRITE_REG    0x09
+#define ESP_READ_REG     0x0a
+
+//# Maximum block sized for RAM and Flash writes, respectively.
+#define ESP_RAM_BLOCK    0x1800
+#define ESP_FLASH_BLOCK  0x400
+
+//# Default baudrate. The ROM auto-bauds, so we can use more or less whatever we want.
+#define ESP_ROM_BAUD     115200
+
+//# First byte of the application image
+#define ESP_IMAGE_MAGIC  0xe9
+
+//# Initial state for the checksum routine
+#define ESP_CHECKSUM_MAGIC  0xef
+
+//# OTP ROM addresses
+#define ESP_OTP_MAC0     0x3ff00050
+#define ESP_OTP_MAC1     0x3ff00054
+
+//# Sflash stub: an assembly routine to read from spi flash and send to host
+#define SFLASH_STUB "\x80\x3c\x00\x40\x1c\x4b\x00\x40\x21\x11\x00\x40\x00\x80" \
+                    "\xfe\x3f\xc1\xfb\xff\xd1\xf8\xff\x2d\x0d\x31\xfd\xff\x41\xf7\xff\x4a" \
+                    "\xdd\x51\xf9\xff\xc0\x05\x00\x21\xf9\xff\x31\xf3\xff\x41\xf5\xff\xc0" \
+                    "\x04\x00\x0b\xcc\x56\xec\xfd\x06\xff\xff\x00\x00"
+class ESPTOOL {
+    
+public:
+    ESPTOOL(Serial& serial, PinName pinEnable, PinName pinProgram)
+private:
+    Serial& _serial;
+    DigitalOut _pinEn, _pinPro;
+    uint8_t read();
+    void read(uint8_t *data, uint32_t len);
+    void write(uint8_t *data, uint32_t len);
+}
+#endif
\ No newline at end of file

diff -r 000000000000 -r f6a51823dfa8 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Apr 06 06:43:53 2015 +0000
@@ -0,0 +1,12 @@
+#include "mbed.h"
+
+DigitalOut myled(LED1);
+
+int main() {
+    while(1) {
+        myled = 1; // LED is ON
+        wait(0.2); // 200 ms
+        myled = 0; // LED is OFF
+        wait(1.0); // 1 sec
+    }
+}

diff -r 000000000000 -r f6a51823dfa8 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Mon Apr 06 06:43:53 2015 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/487b796308b0
\ No newline at end of file