Bob Seque / mbed-dev

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of mbed-dev by mbed official

targets/hal/TARGET_STM/TARGET_STM32L0/serial_api.c@57:dd901dec6bd0, 2016-01-30 (annotated)

Committer:
Splith
Date:
Sat Jan 30 16:48:54 2016 +0000
Revision:
57:dd901dec6bd0
Parent:
0:9b334a45a8ff 
Add USART3 pin mapping to Seeed arch max

Who changed what in which revision?

UserRevisionLine numberNew contents of line
bogdanm 0:9b334a45a8ff 1 /* mbed Microcontroller Library
bogdanm 0:9b334a45a8ff 2 *******************************************************************************
bogdanm 0:9b334a45a8ff 3 * Copyright (c) 2015, STMicroelectronics
bogdanm 0:9b334a45a8ff 4 * All rights reserved.
bogdanm 0:9b334a45a8ff 5 *
bogdanm 0:9b334a45a8ff 6 * Redistribution and use in source and binary forms, with or without
bogdanm 0:9b334a45a8ff 7 * modification, are permitted provided that the following conditions are met:
bogdanm 0:9b334a45a8ff 8 *
bogdanm 0:9b334a45a8ff 9 * 1. Redistributions of source code must retain the above copyright notice,
bogdanm 0:9b334a45a8ff 10 * this list of conditions and the following disclaimer.
bogdanm 0:9b334a45a8ff 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
bogdanm 0:9b334a45a8ff 12 * this list of conditions and the following disclaimer in the documentation
bogdanm 0:9b334a45a8ff 13 * and/or other materials provided with the distribution.
bogdanm 0:9b334a45a8ff 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
bogdanm 0:9b334a45a8ff 15 * may be used to endorse or promote products derived from this software
bogdanm 0:9b334a45a8ff 16 * without specific prior written permission.
bogdanm 0:9b334a45a8ff 17 *
bogdanm 0:9b334a45a8ff 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
bogdanm 0:9b334a45a8ff 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
bogdanm 0:9b334a45a8ff 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
bogdanm 0:9b334a45a8ff 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
bogdanm 0:9b334a45a8ff 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
bogdanm 0:9b334a45a8ff 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
bogdanm 0:9b334a45a8ff 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
bogdanm 0:9b334a45a8ff 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
bogdanm 0:9b334a45a8ff 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
bogdanm 0:9b334a45a8ff 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
bogdanm 0:9b334a45a8ff 28 *******************************************************************************
bogdanm 0:9b334a45a8ff 29 */
bogdanm 0:9b334a45a8ff 30 #include "mbed_assert.h"
bogdanm 0:9b334a45a8ff 31 #include "serial_api.h"
bogdanm 0:9b334a45a8ff 32
bogdanm 0:9b334a45a8ff 33 #if DEVICE_SERIAL
bogdanm 0:9b334a45a8ff 34
bogdanm 0:9b334a45a8ff 35 #include "cmsis.h"
bogdanm 0:9b334a45a8ff 36 #include "pinmap.h"
bogdanm 0:9b334a45a8ff 37 #include "mbed_error.h"
bogdanm 0:9b334a45a8ff 38 #include <string.h>
bogdanm 0:9b334a45a8ff 39 #include "PeripheralPins.h"
bogdanm 0:9b334a45a8ff 40
bogdanm 0:9b334a45a8ff 41 #define UART_NUM (5)
bogdanm 0:9b334a45a8ff 42
bogdanm 0:9b334a45a8ff 43 static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0};
bogdanm 0:9b334a45a8ff 44
bogdanm 0:9b334a45a8ff 45 static uart_irq_handler irq_handler;
bogdanm 0:9b334a45a8ff 46
bogdanm 0:9b334a45a8ff 47 UART_HandleTypeDef UartHandle;
bogdanm 0:9b334a45a8ff 48
bogdanm 0:9b334a45a8ff 49 int stdio_uart_inited = 0;
bogdanm 0:9b334a45a8ff 50 serial_t stdio_uart;
bogdanm 0:9b334a45a8ff 51
bogdanm 0:9b334a45a8ff 52 static void init_uart(serial_t *obj)
bogdanm 0:9b334a45a8ff 53 {
bogdanm 0:9b334a45a8ff 54 UartHandle.Instance = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 55
bogdanm 0:9b334a45a8ff 56 if (obj->uart == LPUART_1) {
bogdanm 0:9b334a45a8ff 57 UartHandle.Init.BaudRate = obj->baudrate >> 1;
bogdanm 0:9b334a45a8ff 58 } else {
bogdanm 0:9b334a45a8ff 59 UartHandle.Init.BaudRate = obj->baudrate;
bogdanm 0:9b334a45a8ff 60 }
bogdanm 0:9b334a45a8ff 61 UartHandle.Init.WordLength = obj->databits;
bogdanm 0:9b334a45a8ff 62 UartHandle.Init.StopBits = obj->stopbits;
bogdanm 0:9b334a45a8ff 63 UartHandle.Init.Parity = obj->parity;
bogdanm 0:9b334a45a8ff 64 UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
bogdanm 0:9b334a45a8ff 65
bogdanm 0:9b334a45a8ff 66 if (obj->pin_rx == NC) {
bogdanm 0:9b334a45a8ff 67 UartHandle.Init.Mode = UART_MODE_TX;
bogdanm 0:9b334a45a8ff 68 } else if (obj->pin_tx == NC) {
bogdanm 0:9b334a45a8ff 69 UartHandle.Init.Mode = UART_MODE_RX;
bogdanm 0:9b334a45a8ff 70 } else {
bogdanm 0:9b334a45a8ff 71 UartHandle.Init.Mode = UART_MODE_TX_RX;
bogdanm 0:9b334a45a8ff 72 }
bogdanm 0:9b334a45a8ff 73
bogdanm 0:9b334a45a8ff 74 // Disable the reception overrun detection
bogdanm 0:9b334a45a8ff 75 UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
bogdanm 0:9b334a45a8ff 76 UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
bogdanm 0:9b334a45a8ff 77
bogdanm 0:9b334a45a8ff 78 if (HAL_UART_Init(&UartHandle) != HAL_OK) {
bogdanm 0:9b334a45a8ff 79 error("Cannot initialize UART");
bogdanm 0:9b334a45a8ff 80 }
bogdanm 0:9b334a45a8ff 81 }
bogdanm 0:9b334a45a8ff 82
bogdanm 0:9b334a45a8ff 83 void serial_init(serial_t *obj, PinName tx, PinName rx)
bogdanm 0:9b334a45a8ff 84 {
bogdanm 0:9b334a45a8ff 85 // Determine the UART to use (UART_1, UART_2, ...)
bogdanm 0:9b334a45a8ff 86 UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
bogdanm 0:9b334a45a8ff 87 UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
bogdanm 0:9b334a45a8ff 88
bogdanm 0:9b334a45a8ff 89 // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
bogdanm 0:9b334a45a8ff 90 obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
bogdanm 0:9b334a45a8ff 91 MBED_ASSERT(obj->uart != (UARTName)NC);
bogdanm 0:9b334a45a8ff 92
bogdanm 0:9b334a45a8ff 93 // Enable UART clock
bogdanm 0:9b334a45a8ff 94 if (obj->uart == UART_1) {
bogdanm 0:9b334a45a8ff 95 __HAL_RCC_USART1_CLK_ENABLE();
bogdanm 0:9b334a45a8ff 96 obj->index = 0;
bogdanm 0:9b334a45a8ff 97 }
bogdanm 0:9b334a45a8ff 98
bogdanm 0:9b334a45a8ff 99 if (obj->uart == UART_2) {
bogdanm 0:9b334a45a8ff 100 __HAL_RCC_USART2_CLK_ENABLE();
bogdanm 0:9b334a45a8ff 101 obj->index = 1;
bogdanm 0:9b334a45a8ff 102 }
bogdanm 0:9b334a45a8ff 103
bogdanm 0:9b334a45a8ff 104 if (obj->uart == LPUART_1) {
bogdanm 0:9b334a45a8ff 105 __HAL_RCC_LPUART1_CLK_ENABLE();
bogdanm 0:9b334a45a8ff 106 obj->index = 2;
bogdanm 0:9b334a45a8ff 107 }
bogdanm 0:9b334a45a8ff 108
bogdanm 0:9b334a45a8ff 109 #if defined(USART4_BASE)
bogdanm 0:9b334a45a8ff 110 if (obj->uart == UART_4) {
bogdanm 0:9b334a45a8ff 111 __HAL_RCC_USART4_CLK_ENABLE();
bogdanm 0:9b334a45a8ff 112 obj->index = 3;
bogdanm 0:9b334a45a8ff 113 }
bogdanm 0:9b334a45a8ff 114 #endif
bogdanm 0:9b334a45a8ff 115
bogdanm 0:9b334a45a8ff 116 #if defined(USART5_BASE)
bogdanm 0:9b334a45a8ff 117 if (obj->uart == UART_5) {
bogdanm 0:9b334a45a8ff 118 __HAL_RCC_USART5_CLK_ENABLE();
bogdanm 0:9b334a45a8ff 119 obj->index = 4;
bogdanm 0:9b334a45a8ff 120 }
bogdanm 0:9b334a45a8ff 121 #endif
bogdanm 0:9b334a45a8ff 122
bogdanm 0:9b334a45a8ff 123 // Configure the UART pins
bogdanm 0:9b334a45a8ff 124 pinmap_pinout(tx, PinMap_UART_TX);
bogdanm 0:9b334a45a8ff 125 pinmap_pinout(rx, PinMap_UART_RX);
bogdanm 0:9b334a45a8ff 126 if (tx != NC) {
bogdanm 0:9b334a45a8ff 127 pin_mode(tx, PullUp);
bogdanm 0:9b334a45a8ff 128 }
bogdanm 0:9b334a45a8ff 129 if (rx != NC) {
bogdanm 0:9b334a45a8ff 130 pin_mode(rx, PullUp);
bogdanm 0:9b334a45a8ff 131 }
bogdanm 0:9b334a45a8ff 132
bogdanm 0:9b334a45a8ff 133 // Configure UART
bogdanm 0:9b334a45a8ff 134 obj->baudrate = 9600;
bogdanm 0:9b334a45a8ff 135 obj->databits = UART_WORDLENGTH_8B;
bogdanm 0:9b334a45a8ff 136 obj->stopbits = UART_STOPBITS_1;
bogdanm 0:9b334a45a8ff 137 obj->parity = UART_PARITY_NONE;
bogdanm 0:9b334a45a8ff 138 obj->pin_tx = tx;
bogdanm 0:9b334a45a8ff 139 obj->pin_rx = rx;
bogdanm 0:9b334a45a8ff 140
bogdanm 0:9b334a45a8ff 141 init_uart(obj);
bogdanm 0:9b334a45a8ff 142
bogdanm 0:9b334a45a8ff 143 // For stdio management
bogdanm 0:9b334a45a8ff 144 if (obj->uart == STDIO_UART) {
bogdanm 0:9b334a45a8ff 145 stdio_uart_inited = 1;
bogdanm 0:9b334a45a8ff 146 memcpy(&stdio_uart, obj, sizeof(serial_t));
bogdanm 0:9b334a45a8ff 147 }
bogdanm 0:9b334a45a8ff 148 }
bogdanm 0:9b334a45a8ff 149
bogdanm 0:9b334a45a8ff 150 void serial_free(serial_t *obj)
bogdanm 0:9b334a45a8ff 151 {
bogdanm 0:9b334a45a8ff 152 // Reset UART and disable clock
bogdanm 0:9b334a45a8ff 153 if (obj->uart == UART_1) {
bogdanm 0:9b334a45a8ff 154 __HAL_RCC_USART1_FORCE_RESET();
bogdanm 0:9b334a45a8ff 155 __HAL_RCC_USART1_RELEASE_RESET();
bogdanm 0:9b334a45a8ff 156 __HAL_RCC_USART1_CLK_DISABLE();
bogdanm 0:9b334a45a8ff 157 }
bogdanm 0:9b334a45a8ff 158
bogdanm 0:9b334a45a8ff 159 if (obj->uart == UART_2) {
bogdanm 0:9b334a45a8ff 160 __HAL_RCC_USART2_FORCE_RESET();
bogdanm 0:9b334a45a8ff 161 __HAL_RCC_USART2_RELEASE_RESET();
bogdanm 0:9b334a45a8ff 162 __HAL_RCC_USART2_CLK_DISABLE();
bogdanm 0:9b334a45a8ff 163 }
bogdanm 0:9b334a45a8ff 164
bogdanm 0:9b334a45a8ff 165 if (obj->uart == LPUART_1) {
bogdanm 0:9b334a45a8ff 166 __HAL_RCC_LPUART1_FORCE_RESET();
bogdanm 0:9b334a45a8ff 167 __HAL_RCC_LPUART1_RELEASE_RESET();
bogdanm 0:9b334a45a8ff 168 __HAL_RCC_LPUART1_CLK_DISABLE();
bogdanm 0:9b334a45a8ff 169 }
bogdanm 0:9b334a45a8ff 170
bogdanm 0:9b334a45a8ff 171 #if defined(USART4_BASE)
bogdanm 0:9b334a45a8ff 172 if (obj->uart == UART_4) {
bogdanm 0:9b334a45a8ff 173 __HAL_RCC_USART4_FORCE_RESET();
bogdanm 0:9b334a45a8ff 174 __HAL_RCC_USART4_RELEASE_RESET();
bogdanm 0:9b334a45a8ff 175 __HAL_RCC_USART4_CLK_DISABLE();
bogdanm 0:9b334a45a8ff 176 }
bogdanm 0:9b334a45a8ff 177 #endif
bogdanm 0:9b334a45a8ff 178
bogdanm 0:9b334a45a8ff 179 #if defined(USART5_BASE)
bogdanm 0:9b334a45a8ff 180 if (obj->uart == UART_5) {
bogdanm 0:9b334a45a8ff 181 __HAL_RCC_USART5_FORCE_RESET();
bogdanm 0:9b334a45a8ff 182 __HAL_RCC_USART5_RELEASE_RESET();
bogdanm 0:9b334a45a8ff 183 __HAL_RCC_USART5_CLK_DISABLE();
bogdanm 0:9b334a45a8ff 184 }
bogdanm 0:9b334a45a8ff 185 #endif
bogdanm 0:9b334a45a8ff 186
bogdanm 0:9b334a45a8ff 187 // Configure GPIOs
bogdanm 0:9b334a45a8ff 188 pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
bogdanm 0:9b334a45a8ff 189 pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
bogdanm 0:9b334a45a8ff 190
bogdanm 0:9b334a45a8ff 191 serial_irq_ids[obj->index] = 0;
bogdanm 0:9b334a45a8ff 192 }
bogdanm 0:9b334a45a8ff 193
bogdanm 0:9b334a45a8ff 194 void serial_baud(serial_t *obj, int baudrate)
bogdanm 0:9b334a45a8ff 195 {
bogdanm 0:9b334a45a8ff 196 obj->baudrate = baudrate;
bogdanm 0:9b334a45a8ff 197 init_uart(obj);
bogdanm 0:9b334a45a8ff 198 }
bogdanm 0:9b334a45a8ff 199
bogdanm 0:9b334a45a8ff 200 void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
bogdanm 0:9b334a45a8ff 201 {
bogdanm 0:9b334a45a8ff 202 if (data_bits == 9) {
bogdanm 0:9b334a45a8ff 203 obj->databits = UART_WORDLENGTH_9B;
bogdanm 0:9b334a45a8ff 204 } else {
bogdanm 0:9b334a45a8ff 205 obj->databits = UART_WORDLENGTH_8B;
bogdanm 0:9b334a45a8ff 206 }
bogdanm 0:9b334a45a8ff 207
bogdanm 0:9b334a45a8ff 208 switch (parity) {
bogdanm 0:9b334a45a8ff 209 case ParityOdd:
bogdanm 0:9b334a45a8ff 210 case ParityForced0:
bogdanm 0:9b334a45a8ff 211 obj->parity = UART_PARITY_ODD;
bogdanm 0:9b334a45a8ff 212 break;
bogdanm 0:9b334a45a8ff 213 case ParityEven:
bogdanm 0:9b334a45a8ff 214 case ParityForced1:
bogdanm 0:9b334a45a8ff 215 obj->parity = UART_PARITY_EVEN;
bogdanm 0:9b334a45a8ff 216 break;
bogdanm 0:9b334a45a8ff 217 default: // ParityNone
bogdanm 0:9b334a45a8ff 218 obj->parity = UART_PARITY_NONE;
bogdanm 0:9b334a45a8ff 219 break;
bogdanm 0:9b334a45a8ff 220 }
bogdanm 0:9b334a45a8ff 221
bogdanm 0:9b334a45a8ff 222 if (stop_bits == 2) {
bogdanm 0:9b334a45a8ff 223 obj->stopbits = UART_STOPBITS_2;
bogdanm 0:9b334a45a8ff 224 } else {
bogdanm 0:9b334a45a8ff 225 obj->stopbits = UART_STOPBITS_1;
bogdanm 0:9b334a45a8ff 226 }
bogdanm 0:9b334a45a8ff 227
bogdanm 0:9b334a45a8ff 228 init_uart(obj);
bogdanm 0:9b334a45a8ff 229 }
bogdanm 0:9b334a45a8ff 230
bogdanm 0:9b334a45a8ff 231 /******************************************************************************
bogdanm 0:9b334a45a8ff 232 * INTERRUPTS HANDLING
bogdanm 0:9b334a45a8ff 233 ******************************************************************************/
bogdanm 0:9b334a45a8ff 234
bogdanm 0:9b334a45a8ff 235 static void uart_irq(UARTName name, int id)
bogdanm 0:9b334a45a8ff 236 {
bogdanm 0:9b334a45a8ff 237 UartHandle.Instance = (USART_TypeDef *)name;
bogdanm 0:9b334a45a8ff 238 if (serial_irq_ids[id] != 0) {
bogdanm 0:9b334a45a8ff 239 if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
bogdanm 0:9b334a45a8ff 240 irq_handler(serial_irq_ids[id], TxIrq);
bogdanm 0:9b334a45a8ff 241 __HAL_UART_CLEAR_IT(&UartHandle, UART_CLEAR_TCF);
bogdanm 0:9b334a45a8ff 242 }
bogdanm 0:9b334a45a8ff 243 if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
bogdanm 0:9b334a45a8ff 244 irq_handler(serial_irq_ids[id], RxIrq);
bogdanm 0:9b334a45a8ff 245 volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
bogdanm 0:9b334a45a8ff 246 }
bogdanm 0:9b334a45a8ff 247 }
bogdanm 0:9b334a45a8ff 248 }
bogdanm 0:9b334a45a8ff 249
bogdanm 0:9b334a45a8ff 250 static void uart1_irq(void)
bogdanm 0:9b334a45a8ff 251 {
bogdanm 0:9b334a45a8ff 252 uart_irq(UART_1, 0);
bogdanm 0:9b334a45a8ff 253 }
bogdanm 0:9b334a45a8ff 254
bogdanm 0:9b334a45a8ff 255 static void uart2_irq(void)
bogdanm 0:9b334a45a8ff 256 {
bogdanm 0:9b334a45a8ff 257 uart_irq(UART_2, 1);
bogdanm 0:9b334a45a8ff 258 }
bogdanm 0:9b334a45a8ff 259
bogdanm 0:9b334a45a8ff 260 static void lpuart1_irq(void)
bogdanm 0:9b334a45a8ff 261 {
bogdanm 0:9b334a45a8ff 262 uart_irq(LPUART_1, 2);
bogdanm 0:9b334a45a8ff 263 }
bogdanm 0:9b334a45a8ff 264
bogdanm 0:9b334a45a8ff 265 #if defined(USART4_BASE)
bogdanm 0:9b334a45a8ff 266 static void uart4_irq(void)
bogdanm 0:9b334a45a8ff 267 {
bogdanm 0:9b334a45a8ff 268 uart_irq(UART_4, 3);
bogdanm 0:9b334a45a8ff 269 }
bogdanm 0:9b334a45a8ff 270 #endif
bogdanm 0:9b334a45a8ff 271
bogdanm 0:9b334a45a8ff 272 #if defined(USART5_BASE)
bogdanm 0:9b334a45a8ff 273 static void uart5_irq(void)
bogdanm 0:9b334a45a8ff 274 {
bogdanm 0:9b334a45a8ff 275 uart_irq(UART_5, 4);
bogdanm 0:9b334a45a8ff 276 }
bogdanm 0:9b334a45a8ff 277 #endif
bogdanm 0:9b334a45a8ff 278
bogdanm 0:9b334a45a8ff 279 void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
bogdanm 0:9b334a45a8ff 280 {
bogdanm 0:9b334a45a8ff 281 irq_handler = handler;
bogdanm 0:9b334a45a8ff 282 serial_irq_ids[obj->index] = id;
bogdanm 0:9b334a45a8ff 283 }
bogdanm 0:9b334a45a8ff 284
bogdanm 0:9b334a45a8ff 285 void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
bogdanm 0:9b334a45a8ff 286 {
bogdanm 0:9b334a45a8ff 287 IRQn_Type irq_n = (IRQn_Type)0;
bogdanm 0:9b334a45a8ff 288 uint32_t vector = 0;
bogdanm 0:9b334a45a8ff 289
bogdanm 0:9b334a45a8ff 290 UartHandle.Instance = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 291
bogdanm 0:9b334a45a8ff 292 if (obj->uart == UART_1) {
bogdanm 0:9b334a45a8ff 293 irq_n = USART1_IRQn;
bogdanm 0:9b334a45a8ff 294 vector = (uint32_t)&uart1_irq;
bogdanm 0:9b334a45a8ff 295 }
bogdanm 0:9b334a45a8ff 296
bogdanm 0:9b334a45a8ff 297 if (obj->uart == UART_2) {
bogdanm 0:9b334a45a8ff 298 irq_n = USART2_IRQn;
bogdanm 0:9b334a45a8ff 299 vector = (uint32_t)&uart2_irq;
bogdanm 0:9b334a45a8ff 300 }
bogdanm 0:9b334a45a8ff 301
bogdanm 0:9b334a45a8ff 302 if (obj->uart == LPUART_1) {
bogdanm 0:9b334a45a8ff 303 irq_n = RNG_LPUART1_IRQn;
bogdanm 0:9b334a45a8ff 304 vector = (uint32_t)&lpuart1_irq;
bogdanm 0:9b334a45a8ff 305 }
bogdanm 0:9b334a45a8ff 306
bogdanm 0:9b334a45a8ff 307 #if defined(USART4_BASE)
bogdanm 0:9b334a45a8ff 308 if (obj->uart == UART_4) {
bogdanm 0:9b334a45a8ff 309 irq_n = USART4_5_IRQn;
bogdanm 0:9b334a45a8ff 310 vector = (uint32_t)&uart4_irq;
bogdanm 0:9b334a45a8ff 311 }
bogdanm 0:9b334a45a8ff 312 #endif
bogdanm 0:9b334a45a8ff 313
bogdanm 0:9b334a45a8ff 314 #if defined(USART5_BASE)
bogdanm 0:9b334a45a8ff 315 if (obj->uart == UART_5) {
bogdanm 0:9b334a45a8ff 316 irq_n = USART4_5_IRQn;
bogdanm 0:9b334a45a8ff 317 vector = (uint32_t)&uart5_irq;
bogdanm 0:9b334a45a8ff 318 }
bogdanm 0:9b334a45a8ff 319 #endif
bogdanm 0:9b334a45a8ff 320
bogdanm 0:9b334a45a8ff 321 if (enable) {
bogdanm 0:9b334a45a8ff 322
bogdanm 0:9b334a45a8ff 323 if (irq == RxIrq) {
bogdanm 0:9b334a45a8ff 324 __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
bogdanm 0:9b334a45a8ff 325 } else { // TxIrq
bogdanm 0:9b334a45a8ff 326 __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
bogdanm 0:9b334a45a8ff 327 }
bogdanm 0:9b334a45a8ff 328
bogdanm 0:9b334a45a8ff 329 NVIC_SetVector(irq_n, vector);
bogdanm 0:9b334a45a8ff 330 NVIC_EnableIRQ(irq_n);
bogdanm 0:9b334a45a8ff 331
bogdanm 0:9b334a45a8ff 332 } else { // disable
bogdanm 0:9b334a45a8ff 333
bogdanm 0:9b334a45a8ff 334 int all_disabled = 0;
bogdanm 0:9b334a45a8ff 335
bogdanm 0:9b334a45a8ff 336 if (irq == RxIrq) {
bogdanm 0:9b334a45a8ff 337 __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
bogdanm 0:9b334a45a8ff 338 // Check if TxIrq is disabled too
bogdanm 0:9b334a45a8ff 339 if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
bogdanm 0:9b334a45a8ff 340 } else { // TxIrq
bogdanm 0:9b334a45a8ff 341 __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
bogdanm 0:9b334a45a8ff 342 // Check if RxIrq is disabled too
bogdanm 0:9b334a45a8ff 343 if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
bogdanm 0:9b334a45a8ff 344 }
bogdanm 0:9b334a45a8ff 345
bogdanm 0:9b334a45a8ff 346 if (all_disabled) NVIC_DisableIRQ(irq_n);
bogdanm 0:9b334a45a8ff 347
bogdanm 0:9b334a45a8ff 348 }
bogdanm 0:9b334a45a8ff 349 }
bogdanm 0:9b334a45a8ff 350
bogdanm 0:9b334a45a8ff 351 /******************************************************************************
bogdanm 0:9b334a45a8ff 352 * READ/WRITE
bogdanm 0:9b334a45a8ff 353 ******************************************************************************/
bogdanm 0:9b334a45a8ff 354
bogdanm 0:9b334a45a8ff 355 int serial_getc(serial_t *obj)
bogdanm 0:9b334a45a8ff 356 {
bogdanm 0:9b334a45a8ff 357 USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 358 while (!serial_readable(obj));
bogdanm 0:9b334a45a8ff 359 return (int)(uart->RDR & (uint32_t)0xFF);
bogdanm 0:9b334a45a8ff 360 }
bogdanm 0:9b334a45a8ff 361
bogdanm 0:9b334a45a8ff 362 void serial_putc(serial_t *obj, int c)
bogdanm 0:9b334a45a8ff 363 {
bogdanm 0:9b334a45a8ff 364 USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 365 while (!serial_writable(obj));
bogdanm 0:9b334a45a8ff 366 uart->TDR = (uint32_t)(c & (uint32_t)0xFF);
bogdanm 0:9b334a45a8ff 367 }
bogdanm 0:9b334a45a8ff 368
bogdanm 0:9b334a45a8ff 369 int serial_readable(serial_t *obj)
bogdanm 0:9b334a45a8ff 370 {
bogdanm 0:9b334a45a8ff 371 int status;
bogdanm 0:9b334a45a8ff 372 UartHandle.Instance = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 373 // Check if data is received
bogdanm 0:9b334a45a8ff 374 status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
bogdanm 0:9b334a45a8ff 375 return status;
bogdanm 0:9b334a45a8ff 376 }
bogdanm 0:9b334a45a8ff 377
bogdanm 0:9b334a45a8ff 378 int serial_writable(serial_t *obj)
bogdanm 0:9b334a45a8ff 379 {
bogdanm 0:9b334a45a8ff 380 int status;
bogdanm 0:9b334a45a8ff 381 UartHandle.Instance = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 382 // Check if data is transmitted
bogdanm 0:9b334a45a8ff 383 status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
bogdanm 0:9b334a45a8ff 384 return status;
bogdanm 0:9b334a45a8ff 385 }
bogdanm 0:9b334a45a8ff 386
bogdanm 0:9b334a45a8ff 387 void serial_clear(serial_t *obj)
bogdanm 0:9b334a45a8ff 388 {
bogdanm 0:9b334a45a8ff 389 UartHandle.Instance = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 390 __HAL_UART_CLEAR_IT(&UartHandle, UART_CLEAR_TCF);
bogdanm 0:9b334a45a8ff 391 __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
bogdanm 0:9b334a45a8ff 392 }
bogdanm 0:9b334a45a8ff 393
bogdanm 0:9b334a45a8ff 394 void serial_pinout_tx(PinName tx)
bogdanm 0:9b334a45a8ff 395 {
bogdanm 0:9b334a45a8ff 396 pinmap_pinout(tx, PinMap_UART_TX);
bogdanm 0:9b334a45a8ff 397 }
bogdanm 0:9b334a45a8ff 398
bogdanm 0:9b334a45a8ff 399 void serial_break_set(serial_t *obj)
bogdanm 0:9b334a45a8ff 400 {
bogdanm 0:9b334a45a8ff 401 UartHandle.Instance = (USART_TypeDef *)(obj->uart);
bogdanm 0:9b334a45a8ff 402 __HAL_UART_SEND_REQ(&UartHandle, UART_SENDBREAK_REQUEST);
bogdanm 0:9b334a45a8ff 403 }
bogdanm 0:9b334a45a8ff 404
bogdanm 0:9b334a45a8ff 405 void serial_break_clear(serial_t *obj)
bogdanm 0:9b334a45a8ff 406 {
bogdanm 0:9b334a45a8ff 407 }
bogdanm 0:9b334a45a8ff 408
bogdanm 0:9b334a45a8ff 409 #endif