Erik -

Activity

Reply to Four PwmIn inputs at 5 kHz each, KL25Z not keeping up? - For the enable and disable_irq functions, see: http://mbed.org/questions/2274/Dissable-IRQ-on-DigialIn-pin-stopping-sl/. I also only found out they were …
Erik - - 31 Dec 2013
Answer posted for Question: Advice for OneWire library with I2C and RTOS - I happened to have the same problem recently, see: http://mbed.org/users/Sissors/code/SimpleDMA/file/c3a84c6c432c/SimpleDMA.h. Put it in an ifdef …
Erik - - 31 Dec 2013
Reply to Four PwmIn inputs at 5 kHz each, KL25Z not keeping up? - I had a small test program still around which tests the InterruptIn speed: roughly 90kHz …
Erik - - 30 Dec 2013
Answer posted for Question: difference in powering the LPC1768 - 1. Yep, Vu is a direct connection of the USB power supply. No USB power …
Erik - - 29 Dec 2013
Reply to FRDM KL05Z , FRDM K20D50M - Don't have one of these :(. Why I make this useless post? To see if …
Erik - - 28 Dec 2013
Comment on: Ethernet Testing - This code is old, have a look at the new ethernet stack: http://mbed.org/handbook/Ethernet-Interface
Erik - - 27 Dec 2013
Reply to Official mbed-gui library - You are right it isn't a real library, but that is something that can be …
Erik - - 27 Dec 2013
SDFileSystem_RTOS_HelloWorld wiki was updated SDFileSystem_RTOS_HelloWorld wiki was updated
Erik - - 26 Dec 2013
Reply to Official mbed-gui library - A good idea, some random stuff: I don't expect this will be done by mbed …
Erik - - 26 Dec 2013
Reply to Virtual disks: difference between mbed LPC1768 and EA LPC4088QSB? - The LPC1768 mbed has a seperate flash IC where a real file system is on, …
Erik - - 23 Dec 2013
Reply to Sorry, there was a problem with the device registration code supplied. - I assume that is just the link to add the 4088 to your devices to …
Erik - - 23 Dec 2013
Reply to Need advice for a touchscreen - I2C is rather slow, you want SPI (at least I assume with touchscreen you don't …
Erik - - 23 Dec 2013
Answer posted for Question: using functions - Mainly what Tomas said. If you have your own library you can do it (although …
Erik - - 23 Dec 2013
Answer posted for Question: Compiler error 18 when including <vector> - I copy pasted that code into the online compiler and it compiles fine for me …
Erik - - 22 Dec 2013
Reply to ANT+ Library - Do you have a link to that device? I could find something from Dynastream, but …
Erik - - 22 Dec 2013
Answer posted for Question: Max UART baud rate for LPC1768? - From the datasheet: <> 8.16.1 Features • Maximum UART data bit rate of 6.25 Mbit/s. …
Erik - - 22 Dec 2013
Reply to Embedded Artists LPC11U35 QuickStart Board Support - Wasn't it also added to the platform list? I thought I saw it there too, …
Erik - - 19 Dec 2013
Reply to MBED Board Application with Offline compiler (gcc-arm-none-eabi) - And why can't you use the mbed library? There are also other libraries out there …
Erik - - 16 Dec 2013
Reply to MBED Board Application with Offline compiler (gcc-arm-none-eabi) - Use the mbed library? Which is kinda the point of mbed ;). You should be …
Erik - - 16 Dec 2013
Reply to Code display issues on mbed repository: html entities are double-escaped &lt; &gt; etc - To me it shows it correct Robbie, but I have seen the same in repositories.
Erik - - 14 Dec 2013